Introduction Preparations PORTABLE DVD PLAYER Playback SD-P2900SR OWNER S MANUAL DIGITAL VIDEO Function Settings Connections Others Owner’s Record The model number and serial number are on the bottom of your DVD player. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this DVD player.
Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Model No. Serial No. Retain this information for future reference. Introduction In the spaces provided below, record the Model and Serial No. located on the bottom of your DVD player. About disposal The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury. Please follow local ordinances or regulations when you dispose of the product.
SAFETY PRECAUTIONS Introduction Location of the required label Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
IMPORTANT SAFETY INSTRUCTIONS This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Introduction IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY INSTRUCTIONS 13. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damaged. 19. Do not touch a spinning disc. When you open the disc holder, the disc may have not stopped spinning. Touching a spinning disc may cause personal injury or damage to the product. 14.
25. CAUTION: If the DVD player is dropped and the cabinet or enclosure surface has been damaged or the DVD player does not operate normally, take the following precautions: • ALWAYS turn off the DVD player and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged DVD player. The LCD panel inside the DVD player contains glass and a toxic liquid.
Introduction IMPORTANT SAFETY INSTRUCTIONS g) Never dispose of used battery packs with other ordinary solid wastes, since they contain toxic substances. Always dispose of used battery packs in accordance with community regulations that apply to the disposal of batteries. Cover the metal terminals with insulating tape, in order to prevent accidental short-circuiting. h) Always confirm that the battery pack is compatible with your player, before attaching the battery pack to the player.
31. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 32. Following mark means “CAUTION - RISK OF ELECTRIC SHOCK - DO NOT OPEN”. 33. Vehicle adapter and operation in a car a) NEVER operate the apparatus or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place an apparatus within the eyesight of a driver while he/she is driving an automobile/vehicle.
Introduction IMPORTANT SAFETY INSTRUCTIONS e) When handling, using or storing the adapter power cord NEVER: - Place or locate near any apparatus that produces heat. - Disassemble, splice or extend the cord. - Pull, force or place any heavy objects on the cord. - Bend, twist or bind the cord. k) Some cars may not have a compatible socket. NEVER modify this adapter to fit an incompatible cigarette lighter socket and/or power port.
Precautions Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Do not leave the player in a vehicle. Rise or drop in temperature may result in malfunction of the player. When transporting the player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packaged at the factory.
Introduction Precautions (continued) Notes on moisture condensation Moisture condensation damages the player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the player. Moisture condensation occurs during the following cases.
This owner’s manual explains the basic instructions of this player. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the player may not respond to all operating commands. This is not a defect in the player. Refer to instruction notes of discs. Notes on region numbers The region number of this player is 5. Region numbers, corresponding to specific geographical playback area, are printed on your DVD video disc.
Introduction Table of contents Introduction Connecting to headphones ............................... 35 Playing a disc...................................................... 36 SAFETY PRECAUTIONS ..................................... 2 IMPORTANT SAFETY INSTRUCTIONS .............. 5 Precautions ........................................................ 11 Identification of Controls .................................. 16 Accessories .......................................................
Connecting to audio equipment........................ 69 Selecting subtitles .............................................. 46 Connecting to an AV amplifier (via digital audio input) ..........................................69 Connecting to an audio system equipped with analog audio inputs...............................................70 Selecting a playback sound............................... 47 Playing audio/video/picture files....................... 48 Selecting the sound enhancement .................
Identification of Controls Introduction Instructions and actual buttons Most instructions are based on remote control operation, unless otherwise noted. You can use the buttons on the remote control and those on the main unit as well when they have the same function. Some functions are available only from the remote control. -AIN 5NIT 3EE PAGE IN FOR DETAILS ,#$ MONITOR 4/0 -%.5 BUTTON 4O DISPLAY A TOP MENU OF $6$ VIDEO DISC -%.
2IGHT SIDE (EADPHONE JACKS § 4O CONNECT HEADPHONES ")4342%!- 0#- JACK #ONNECT TO $IGITAL /UT JACK OF YOUR AMPLIFIER $# ). 6 JACK 4O CONNECT THE !# ADAPTER SUPPLIED !6 ). JACK #ONNECT TO !6 OUTPUT TERMINAL OF YOUR VIDEO EQUIPMENT Introduction 6OLUME CONTROL 4O ADJUST THE VOLUME !6 /54 JACK #ONNECT TO !6 INPUT TERMINAL OF YOUR 46 ,EFT SIDE 3 6)$%/ JACK 4O CONNECT TO AN 3 6IDEO INPUT OF YOUR 46 #/-0/.%.
Identification of Controls (continued) 2EMOTE CONTROL 3EE PAGE IN % ! - BUTTON Introduction -%.5 BUTTON -/$% $)30,!9 BUTTON 3%450 BUTTON 0)#452% BUTTON 4/0 -%.5 BUTTON 35"4)4,% BUTTON !5$)/ BUTTON 0!53% 34%0 BUTTON 34/0 BUTTON !.',% BUTTON ://- BUTTON 2%452. BUTTON #,%!2 BUTTON 0,!9 BUTTON &7$ BUTTON 3,/7 BUTTON %.4%2 BUTTON 2%6 BUTTON 3,/7 BUTTON $IRECTION BUTTONS 3+)0 BUTTONS .
Accessories Remote control (MEDR16UX) Coin-shaped battery (CR2025) Audio/video cable Power cord* Component video cable AC adapter (ADPV16A)* Battery pack* (SD-PBP100R) Headphones Carrying case Introduction Check that the following accessories are supplied. Use this for carrying, etc. of the player. Vehicle adapter Owner’s manual * Do not use an AC adapter, a power cord, a battery pack and a vehicle adapter other than one specified.
Introduction Notes and Information Playable discs This player can play the following discs. Disc Disc Mark DVD Video disc Disc Size 12cm/8cm DVD-RW DVD-R •Video(moving pictures)+Audio 12cm •Video + Audio (DVD VR format (Compatible with CPRM)/DVD Video format)* *Finalized discs only. 12cm •Video + Audio (DVD VR format (Compatible with CPRM)/DVD Video format)* *Finalized discs only.
On VIDEO CDs This player supports VIDEO CDs equipped with the PBC (Version 2.0) function. (PBC is an abbreviation for Playback Control.) You can enjoy two playback variations depending on types of discs. Introduction Notes ・ You cannot play discs other than those listed left. ・ You cannot play discs of DVD-RAM or non-standardized discs, etc., even if they may be labeled as left. ・ This player uses the PAL/NTSC colour system.
Introduction Notes and Information (continued) On handling discs Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Do not touch the playback side of the disc. Do not attach paper or tape to discs. Playback side On cleaning discs Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.
This player can play the following memory cards. Card SD Memory Card Card Mark Contents • Audio (MP3/WMA) • Photograph (JPEG) Multi Media Card • Audio (MP3/WMA) • Photograph (JPEG) Memory Stick • Audio (MP3/WMA) • Photograph (JPEG) xDPicture Card • Audio (MP3/WMA) • Photograph (JPEG) • SD is a trademark. • MMC and MultiMediaCard are trademarks of Infineon Technologies AG and licensed to MMCA (MultiMediaCard Association). • “Memory Stick” and are trademarks of Sony Corporation.
Introduction Notes and Information (continued) 24 Notices for use Ensure that you insert the memory card correctly into this player. Do not eject the memory card while it is in use. If ejected while in use information on the memory card may be lost. This memory card is a precision electrical instrument. Do not bend, drop or apply strong force to it. Do not use or store the memory card in an environment of high static electricity or electrical interference.
Preparations Preparations before using.
Preparation of the remote control Preparations Insert the specified battery to the remote control. See page 8 , 9 for safety use of coin-shaped batteries. 1 Gently insert a fingernail in groove q and pull out the holder in direction w. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Backside 1 Within about 3 m (9.9 feet) 2 Place a coin-shaped battery (CR2025) with the + side up on the holder.
Power connection Connect the supplied AC adapter to wall outlet as below. Follow steps 1 to 3 to connect. When disconnecting, reverse this order. 2 Preparations To the DC IN 12V jack CAUTION • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
Using the battery pack Preparations The supplied battery pack can power the player for operation outdoors or in a place with no outlets. WARNING • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below.
Important • Detach the battery pack from the player after being used. The battery pack needs to be charged before use. (The battery indicator ( ) is shown in the upper left corner of the screen when the power in the battery pack is running low.) Perform a full charge before the first use. 1 Attach the battery pack to the player. 2 Connect the supplied AC adapter and the power cord to the player. Charging starts, and the POWER indicator illuminates in orange.
Using the battery pack (continued) ■ Detaching the battery pack Preparations 1 Turn the player off. 2 Disconnect the AC adapter and the power cord from the player. 3 Turn the player upside down. 4 Slide the battery pack’s lock switch in the direction of the arrow q, then slide the battery pack in the direction of the arrow w to remove it. Lock switch 5 Close the connector cover on the bottom of the player.
Powering on/off Slide the power switch to turn the power on or off.
Changing the AV mode Preparations You can enjoy various pictures of discs or connected equipments by changing the AV mode. Change it depending on your needs. Press MODE repeatedly to select the AV mode. Each time you press MODE, the AV mode changes on the screen as below. Select when you want to view the picture of a disc on the LCD monitor of this player. (Normal) • Make sure that (Normal) is selected when you play a disc. Cannot be played any discs other than normal mode.
Playback Play your favorite disc.
Loading a disc For disc compatibility information, see page 20 . 1 Open the LCD monitor. 4 Close the disc cover. Press the edge around “CLOSE”. Playback ■ To remove the disc 2 Press OPEN on the main unit. The disc cover opens. Before using the player for the first time, remove the protective sheet beneath the disc cover. 3 Set a disc. Place a disc with the playback side down, and push gently on the center of the disc to affix it to the spindle.
Connecting to headphones You can connect headphones to the headphone jack using a stereo mini plug. Stereo mini plug ( 3.5mm) Connect either of these jacks. Playback CAUTION • Keep your fingers clear of the disc as it is spinning. Neglecting to may cause serious personal injury. • Be careful not to catch your fingers in the disc holder. • Do not use a cracked, deformed, or repaired discs. • Do not tilt, shake or move the main unit while playing. It may damage the disc.
Playing a disc DVD-V VCD CD ■ Preparations • Turn on the power of the player. • Place a disc to the player. Playback Caution Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc. 1 2 Press MODE repeatedly to select (Normal). Press PLAY. Playback starts. • If you select a DVD video disc that contains a top menu, or select a PBC (Playback Control)-featured VIDEO CD, a menu may appear. See “Using the top menu” 37 .
Pausing playback (Still mode) Press PAUSE/STEP during playback. The picture gets still and sound is muted. To resume normal playback, press PLAY. Using the top menu DVD-V VCD CD 1 Press TOP MENU. 1 2 3 4 The top menu appears. 2 Press / / / to select the title you want. If the titles in the top menu are assigned a number, you can select the title by pressing number buttons. 3 Press ENTER. Playback Adjusting the volume of the speakers or the connected headphones e.g.
Playing a disc (continued) ■ About the screen saver Playback If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when “Screen saver” (refer to “Function Settings”) is set to “On” ). To turn off the screen saver, press any button on the main unit or remote control.
Changing a playback speed Playing in fast reverse or fast forward DVD-V VCD CD Press REV or FWD on the remote control during playback. : Fast reverse playback : Fast forward playback DVD-V VCD CD Press PAUSE/STEP repeatedly during playback. The sound is muted during frame by frame playback. Press PLAY to resume normal playback. Playback Each time you press the REV or FWD button, the playback speed changes.
Playing a desired scene DVD-V VCD CD Skipping chapters or tracks 1 2 Press SKIP ( / ) repeatedly to locate the chapter or track you want. Playback starts from the selected chapter or track. Playback :Playback starts from the beginning of the next chapter or track. :Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track.
Notes • Press the CLEAR button while pressing the SHIFT button to reset the numbers. • Some discs may not respond to this process. • Some scenes may not be located precisely as you specified. First register a bookmark referring to “To register a bookmark” of the next paragraph, then operate these steps below. 1 During playback, press T repeatedly to display “Bookmark”. The display changes each time this button is pressed. e.g.
1 Playing in random order Playing repeatedly DVD-V DVD-V VCD CD During playback, press RANDOM to display “Shuffle on” on the screen. 1 Playback The mode on the screen will disappear in a few seconds if not operated. ■ To resume normal playback Press RANDOM repeatedly until “Shuffle Off” appears. Notes • Some discs may not permit random playback. • The random mode will be canceled when you: – turn off the power. – open the disc cover.
Repeating a title, chapter or track 1 During playback, press REPEAT repeatedly to select the repeat mode. Each time you press the button, the repeat mode changes on the screen. Disc Mode Repeating range DVD-V Repeat Chapter Current chapter DVD-V Repeat Title Current title VCD CD Repeat Single Current track VCD CD Repeat All Whole disc Repeat Off Returns to normal playback. DVD-V VCD Playback Repeat playback starts after finishing the current chapter or track.
Playing in a favorite order DVD-V 1 VCD CD During stop, press MEMORY. The programming display appears. Enter a track number when using a video CD. Program 1 2 Title 1 3 4 Title 2 5 6 Title 3 7 8 Title 4 9 10 11 12 13 14 15 16 Playback Title 6 Play Program 2 Clear Clear All Setting the title, chapter or track in the order you wish to play. 1) Select the number of titles you want to set using / then press ENTER.
Zooming a picture DVD-V 1 VCD CD ■ To resume normal playback Press ZOOM during playback. Press ZOOM repeatedly until “OFF” appears. The zoom icon appears. This operation is available also during slow, still, fast forward or fast reverse playback. Select the zoom point and magnification level. Notes • Some discs may not respond to zoom feature. • Depending on scenes, the buttons may not work as described. • Zooming does not work on characters selected on menus.
1 Changing the camera angle Selecting subtitles DVD-V DVD-V VCD CD Press ANGLE while playing a scene recorded with multiple camera angles. The angle icon ( ) appears on the screen. Playback e.g. Number of angles Angle icon Current angle This display does not appear if the disc includes no scenes recorded with multiple angles. If you press ANGLE while playing a scene not recorded with multiple angles, the angle selection is not possible. 2 Press ANGLE to select the camera angle.
Selecting a playback sound DVD-V 1 VCD Good morning! Bonjour! ¡Buenos días! CD Press AUDIO during playback. The current audio setting is displayed. ■ Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. e.g. 1/3 D 2 ch Eng 2 Press AUDIO while the audio setting is displayed on the screen. Notes • Some discs allow you to change audio selections only via the disc menu.
Playing audio/video/picture files DVD-V VCD CD This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all recordable discs will operate or produce optimal playback quality. The technical criteria set forth in this owner’s manual are meant only as a guide. Use of CD-RW for MP3/WMA files is not recommended.
How to use a memory card 1 2 Insert a memory card into the slot. Press MODE repeatedly until “ (Memory card)” appears. Note ・ Do not eject the memory card while it is in use. If ejected while in use, information on the memory card may be lost. 2 1 1 Insert a media you want to play. ■ To select the category of file 1 Select “Filter” using ENTER. The menu appears. / / then press Playback e.g. / The screen appears as below. 1/8 /Track01.
Playing audio/picture files (continued) ■ Playing repeatedly Select “Repeat” on the screen using during playback then press ENTER. / / / Notes ・Some media files may not permit playback. ) can be operated ・Some functions such as SKIP ( / from the remote control directly. Playback Each time you press ENTER, the repeat mode changes. Off: ↓ Single: ↓ Folder: Notes of audio file playback ・WMA tracks copy-protected cannot be played.
■ Playing in a favorite order ■ To display recorded track/file You can combine your favorite track/file and play in the order you determine. Select “Browser view” on the screen then press ENTER. 1 Select “Edit mode” on the screen using / / / then press ENTER. The track/file list of the media appears. 3 Select track/file you want to play using press ENTER. The check mark ( track/file. ■ To cancel the programmed selections on the displayed / 1 Press STOP twice to stop playback.
1 Selecting the sound enhancement Adjusting the picture DVD-V DVD-V VCD CD Press E.A.M.* The current sound enhancement setting appears. Playback Press E.A.M. repeatedly. • [3D Off] Normal sound. • [3D On] To obtain virtual surround sound effects from just two speakers. Notes ・ Actual effects to sounds may vary depending on the speaker system. Make the selection to your preference. ・ Actual effects to sounds may vary depending on the disc. CD This function operates on the LCD of this player only.
On-screen Display mode DVD-V 3 Press / to adjust the value. Brightness 0 (Darker) to 16 (Brighter) Contrast 0 (Lower) to 16 (Higher) Color 0 (Paler) to 16 (Deeper) Tint 0 (Red) to 16 (Green) Screen 4:3: CD Press DISPLAY while pressing SHIFT during playback. The current instructional information appears. e.g.: DVD video disc Elapsed time of the current title Current chapter or track number Current title number DVD Video Title Audio Subtitle Angle 2/3 1/2 D 3/2.
Function Settings You can change the default settings to customize performance to your preference.
Customizing the function settings DVD-V VCD CD You can change the default settings to customize performance to your preference. 1 4 Press SETUP during stop. The setting menu appears. 2 Function Settings 3 5 Setting OSD Menu , then repeat steps Press SETUP. The setting menu disappears, and the procedure finishes. Press / to select the setting you want to change, then press ENTER. DVD-V VCD CD Subtitle DVD-V VCD CD Details To select a preferred language for on-screen displays.
Video Audio Default DVD-V VCD CD To select a picture size according to the aspect ratio of your TV, when connected to this player to monitor playback picture. View Mode DVD-V VCD CD To select a picture size of the LCD. Video out DVD-V VCD CD To set the connection terminal to use when you want to connect and output to an external device. E.A.M. DVD-V VCD CD You can easily switch to a preferred audio enhancement. (E.A.M. = Enhanced Audio Mode) D.R.C.
Customizing the function settings (continued) ■ Language OSD Menu Audio Function Settings 58 English: French: Spanish: Russian: Off: VCD CD English: To play sound tracks in English. DVD-V VCD CD English: To view on-screen displays in English. Français: To view on-screen displays in French. Español: To view on-screen displays in Spanish. Russian: To view on-screen displays in Russian. Subtitle DVD-V DVD-V VCD CD To display subtitles in English. To display subtitles in French.
DivX subtitle Western European: To display subtitles in west European language. Central European: To display subtitles in Central European language. Cyrillic: To display subtitles in Cyrillic language. Hebrew: To display subtitles in Hebrew language. Aspect Ratio DVD-V VCD CD 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Notes • The displayable picture size is preset on the DVD video disc.
Customizing the function settings (continued) View Mode Fill: DVD-V VCD CD Pictures are expanded horizontally and vertically to fit the shape of the screen. No picture cropping. Original: Pictures are displayed in their original aspect ratios. Auto Fit: Aspect ratios are automatically adjusted. Function Settings Masking bars may appear on the top and bottom or left and right of picture. Pan Scan: Pictures are cropped horizontally or vertically to fit the shape of the screen.
■ Audio E.A.M. Digital Out DVD-V VCD CD Normal: Normal sound. 3D: To obtain expansive virtual surround sound effects from just two speakers. VCD CD Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. The player outputs digital audio signal in the bitstream format when you play a DVD video disc recorded in the Dolby Digital, DTS, MPEG1 or MPEG2 recording system.
Customizing the function settings (continued) ■ Rating Function Settings Parental control 3 Press / to select “Parental control” and enter the password you set then press ENTER. DVD-V VCD CD DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc.
■ To change your 5-digit security code 1 After selecting “Set password”, press the 9 button five times then press ENTER. ■ Default Default The 5-digit security code is cleared. 2 After selecting “Set password”, press the number buttons to create a new 5-digit security code. PBC DVD-V VCD No : To not restore the function settings to their default settings. Yes : CD To restore the function settings to their default settings. On : Off : When playing a VIDEO CD without using the menu.
Connections You can connect the player to a TV or audio system.
Viewing on a connected TV You can connect a TV to this player to view playback picture on it. Precedence of signal quality is COMPONENT > S VIDEO > AV OUT.
Via the COMPONENT VIDEO connector To component video input Component video cable (supplied) To CB (blue) TV CR To CR (red) To Y (green) Audio/video cable (supplied) CB Notes • Refer to the owner’s manual of the connected TV as well. • When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • Connect the player directly to your TV.
Viewing pictures from connected video equipment You can use the LCD of this player to monitor pictures of connected video equipment. 1 Connect video equipment to the AV IN jack of this player. 2 Press MODE repeatedly so that “ IN)” appears on the LCD. (AV The player is ready to display pictures of the connected equipment on the LCD.
Connecting to audio equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. Connecting to an AV amplifier (via digital audio input) The connecting method depends on the types of audio input, digital or audio. Signal flow Select the method according to the type of your equipment. Notes • Refer to the owner’s manual of the connected equipment as well. • If you place the player near a tuner or radio, the radio broadcast sound might be distorted.
Connecting to audio equipment (continued) Connections CAUTION • When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, DTS or MPEG2 decoding function, be sure to set “Digital Out” to “PCM” from the on-screen displays 61 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks.
Using the automobile/vehicle adapter or power port For use of the DVD player in a car, this adapter can power the DVD player from the cigarette lighter socket. 1 2 OFF The LED illuminates when powered. 3 4 Connections WARNING • NEVER operate the DVD player or view a DVD Video while operating an automobile or other vehicle. Note: doing so is illegal in many jurisdictions. NEVER place a DVD player within the eyesight of a driver while he/she is driving an automobile/vehicle.
Using the automobile/vehicle adapter or power port (continued) 1 Turn off the DVD player. 2 Insert the pin plug of the adapter into the DC IN 12V jack of the DVD player. 3 Insert the plug of the adapter into the cigarette lighter socket or power port fully. 4 Turn on the vehicle engine so that the cigarette lighter socket or power port is powered. In some vehicles the cigarette lighter socket or power port is powered even when the vehicle’s engine is not running.
Others Useful informations.
Output sound conversion table Audio selection and outputs Discs DVD video discs VIDEO CDs AUDIO CDs Sound recording system Dolby Digital 48 kHz Linear PCM 96 kHz DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Before calling service personnel Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The LCD turned off by itself. No picture on the LCD monitor. No picture. (Other than built-in LCD monitor) No sound. The playback picture has occasional distortion. Cause • The AC adapter or power plug is disconnected. • The battery pack has been removed. • Battery empty. • The automatic LCD off function turned the LCD off. • “Video out” is not set to “Off”.
Before calling service personnel (continued) Symptom The player does not start playback. Playback does not follow the course of the disc’s program. Buttons do not work. Others The remote control does not work properly. 76 Cause • No disc is inserted. • An unplayable disc is inserted. Correction • Insert a disc. • Insert a playable disc. (Check the disc type, colour system and region number.) • The disc is inserted upside down. • The disc is not inserted securely. • The disc is dirty.
Specifications ■ Player ■ Connectors Power supply DC 12 V (Rated current : 2 A (Maximum: during battery pack charging)) 100 – 240 V AC, 50/60 Hz (with the supplied AC adapter) Mass approximately 1.3 kg External dimensions 266 × 35 × 197 mm (W/H/D) Signal system PAL/3.
Specifications (continued) ■ Liquid crystal display Panel size 25.9 cm (10.2 inches diagonally measured) Projection system TN colour transmission Driving system Amorphous silicon TFT active matrix Resolution 800 (H) × 480 (V) pixels (effective pixel rate : more than 99.99%) • This model complies with the above specifications. • Designs and specifications are subject to change without Others notice. • This model may not be compatible with features and/or specifications that may be added in the future.
© 2007 Toshiba Corporation Printed in China