Operation Manual

CONTENTS
25
Operations
Preparation
1
Install and connect the projector properly.
2
Take off the lens cover.
Press ON/STANDBY.
The projector turns on and both the ON and LAMP
indicators light up in green.
All of the buttons on the main unit will also light.
The lamp lights and the start up display appears.
Turn on the connected equipment and put it
in playback mode.
CAUTION – Do not look into the projection
lens while operating the projector.
Projection on the screen
(Green)
(Green)
Flashing
(Green)
(Green)
ON LAMP ON LAMP
Indicators
1
2
Continued