Instruction Manual

User’s Manual 7-1
Qosmio G10
Chapter 7
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer. TOSHIBA HW Setup lets you configure various
settings including those for the display, boot priority, keyboard, CPU,
nework, device configuration, USB and button settings.
Accessing HW Setup
To run HW Setup, click start, click Control Panel, click Printers and Other
Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config, USB and Button Setting.
There are also three buttons: OK, Cancel and Apply.
General
This window displays the BIOS version and contains two buttons: Default
and About.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.