User Guide

4.3 PC card/Bridge media 4 Replacement Procedures
4.3 PC card/Bridge media
4.3.1 PC card
Removing a PC card
The following describes the procedure for removing a PC card (See Figure 4-2).
CAUTION: Insert or remove a PC card in accordance with any instructions in a PC card
manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press the eject button
once more to eject a PC card.
2. Grasp a PC card and remove it.
NOTE: If a PC card is not inserted all the way, the eject button may not pop out. Be
sure to push a PC card firmly and press the eject button again.
PC card
E
j
ect button
Figure 4-2 Removing a PC card
Installing a PC card
The following describes the procedure for inserting a PC card (See Figure 4-2).
1. Make sure the eject button does not stick out.
2. Insert a PC card and press it until it is securely connected.
4-10 QOSMIO G10 Maintenance Manual (960-497)