User Guide

4 Replacement Procedures 4.9 Optical disk drive
QOSMIO G10 Maintenance Manual (960-497) 4-27
3. Remove the following screws securing the side bracket and remove it from an
optical disk drive.
• M2.0×3.0C SUPER THIN HEAD screw x2
• M2.0×3.2B Stepping screw x1
Stepping screw
Side bracket
M2.0
×
3.0C SUPER THIN HEAD
Figure 4-14 Disassembling the side bracket
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive (See Figure 4-13
and 4-14).
1. Attach the side bracket to an optical disk drive and secure it with the following
screws.
• M2.0×3.0C SUPER THIN HEAD screw x2
• M2.0×3.2B Stepping screw x1
2. Insert an optical disk drive assembly into the slot and connect it to the connector
CN1810 on the system board.
3. Turn over the computer and secure an optical disk drive with the following screws.
• M2.5×4.0B FLAT BIND screw x2