User Guide

4 Replacement Procedures 4.17 CPU fan
4.17 CPU fan
Removing the CPU fan
The following describes the procedure for removing the CPU fan (See Figure 4-35).
1. Disconnect the CPU fan cable from the connector CN8770 on the system board.
2. Remove the following screws securing the CPU fan and remove the CPU fan.
• M2.5×4.0B FLAT BIND screw x2
M2.5x4.0B FLAT BIND
CPU Fan cable
CN8770
Gap
M2.5x4.0B
FLAT BIND
Figure 4-35 Removing the CPU fan
Installing the CPU fan
The following describes the procedure for installing the CPU Fan (See Figure 4-35).
1. Install the CPU fan and secure it with the following screws.
• M2.5×4.0B FLAT BIND screw x2
2. Arranging the CPU fan cable through the gap between the fan and harness holder,
connect the CPU fan cable to the connector CN8770 on the system board.
QOSMIO G10 Maintenance Manual (960-497) 4-53