User Guide

4.26 PC card slot 4 Replacement Procedures
4.26 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot (See Figure 4-51).
1. Remove the following screws securing the PC card slot.
• M2.0×8.0Z BIND screw x2
• M2.0×3.0Z SUPER THIN HEAD screw x2
2. Pull up the PC card slot straight and remove it from the connector CN2100 on the
system board.
CN2100
PC card slot
M2.0x3.0C
SUPER THIN HEAD
M2.0x8.0Z BIND
Figure 4-51 Removing the PC card slot
Installing the PC card slot
The following describes the procedure for installing the PC card slot (See Figure 4-51).
1. Insert the terminal of the PC card slot to the connector CN2100 on the system board.
2. Secure the PC card slot with the following screws.
• M2.0×8.0Z BIND screw x2
• M2.0×3.0Z SUPER THIN HEAD screw x2
4-72 QOSMIO G10 Maintenance Manual (960-497)