User Guide

4.29 Wireless antennas 4 Replacement Procedures
4-82 QOSMIO G10 Maintenance Manual (960-497)
Installing the wireless antennas
The following describes the procedure for installing the wireless antennas (See Figure
4-57 and 4-58).
1. Stick the wireless LAN antennas and bluetooth antenna on the display cover.
NOTE: When sticking the wireless antennas, be sure to stick them along the guide line.
Guide line
2. Arrange the wireless LAN antenna cables and bluetooth antenna cable along the
guide of display cover, and secure them with acetate tapes.
3. Install the hinge (display cover side) to the display cover and secure them with the
following screws.
• M2.5×6.0 PSP TIGHT screw x6