G35-AV660 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 293 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Model: Qosmio™ G35-AV660 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available.
Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com.
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can.
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. 3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.
Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 72/23/EEC, the EMC Directive 89/336/ EEC and/or the R&TTE Directive 1999/ 05/EEC. This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany.
Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4DSOF4 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3.
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
802.
❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Austria Denmark Germany Italy Netherlands Portugal UK Belgium Finland Greece Liechtenstein New Zealand Sweden USA Turbo Mode (5 GHz) Canada USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4FH1 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3.
Optical Drive Safety Instructions The HD DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Never attempt to disassemble, adjust or repair a HD DVD, CD/DVD drive, CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury.
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2006 by Toshiba America Information Systems, Inc. All rights reserved. Export Administration Regulation This document contains technical data that may be controlled under the U.S.
Trademarks Qosmio is a trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. HD DVD Application Logo (HD DVD-ROM) represents the optical drives compliance with the HD DVD physical format, and does not represent compliance with the specification for the HD DVD General Logo defined by the DVD Forum.
Computer Disposal Information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org. 5.375 x 8.375 ver 2.
Contents Introduction................................................................................ 37 This guide ...............................................................38 Safety icons ............................................................39 Other icons used...............................................40 Other documentation ..............................................40 Service options .......................................................41 Chapter 1: Getting Started..................
Contents Using the computer for the first time ......................54 Opening the display panel .................................54 Your computer’s features and specifications ....55 Turning on the power .......................................56 Adding memory (optional) ......................................57 Installing a memory module .............................57 Removing a memory module............................63 Checking total memory .....................................
Contents 29 Chapter 2: Learning the Basics................................................. 93 Computing tips .......................................................93 Using the keyboard .................................................95 Character keys .................................................95 Making your keyboard emulate a full-size keyboard .....................................................95 Ctrl, Fn, and Alt keys .........................................96 Function keys..................
Contents Chapter 3: Mobile Computing.................................................115 Toshiba’s energy-saver design..............................115 Running the computer on battery power ..............115 Battery Notice .................................................116 Power management ........................................117 Using additional batteries ...............................117 Charging batteries.................................................118 Charging the main battery............
Contents 31 Internet Service Providers ..............................145 Connecting to the Internet .............................145 Surfing the Internet.........................................146 Internet features..............................................146 Uploading to, and downloading files from, the Internet ..............................................147 Exploring audio features .......................................147 Recording sounds...........................................
Contents Starting the Media Center .....................................173 Using Media Center...............................................179 Using the Toshiba Remote Control with Media Center.............................................181 Watching Television Programs .............................188 Selecting a Program from the TV Guide..........189 Watching a Recorded TV Program..................191 Changing a scheduled recording.....................191 Searching for a TV Program to Watch .......
Contents 33 Sorting Videos ................................................213 Watching a DVD/HD DVD......................................214 Stopping a DVD Movie....................................215 Playing a DVD movie already in your drive .....215 Changing the Media Center Settings .....................216 More Programs.....................................................225 Online Spotlight ....................................................226 Getting Help for Media Center.........................
Contents Using an instant password..............................259 Using a user password ...................................260 Using a supervisor password..........................261 PC Diagnostic Tool Utility .....................................262 Fn-esse® ...............................................................263 Starting Fn-esse® ...........................................264 Using drag-and-drop to assign a key ..............265 Using the keyboard or pointing device to assign a key ....
Contents 35 Chapter 8: If Something Goes Wrong ...................................293 Problems that are easy to fix ................................293 Problems when you turn on the computer............295 The Windows ® operating system is not working ..298 Using Startup options to fix problems ............299 Internet problems ...........................................300 The Windows® XP operating system can help you ....................................................301 Resolving a hardware conflict .
Contents Appendix A: Hot Keys..............................................................338 Volume Mute ........................................................338 Password security ................................................339 Without a password ........................................339 With a password .............................................339 Maintaining security when the battery is not fully charged .......................................340 Power profile ..........................
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. NOTE This notebook is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Introduction This guide NOTE Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES.
Introduction Safety icons 39 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Other documentation Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text.
Introduction Service options 41 Service options Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba’s standard limited warranty, extended warranty, and service upgrade terms and conditions are available at warranty.toshiba.com. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.
Getting Started Selecting a place to work 43 To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight. ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ❖ Extreme heat, cold, or humidity.
Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1. Turn off the computer. 2. Disconnect the AC adaptor from the power plug socket and computer. 3. Remove the battery pack.
Getting Started Selecting a place to work ❖ 45 Never turn off the computer if a drive light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk/disc or flash media may damage the disk/disc or flash media, the drive, or both. ❖ Keep the computer and disks away from objects that generate strong magnetic fields, such as large stereo speakers. Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files.
Getting Started Setting up your computer Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Standby mode). In this condition, observe the following: ❖ Never cover your computer or AC adaptor with any object. ❖ Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater.
Getting Started Setting up your computer 47 Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices. The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 From the Welcome screen click Next to enter the Setup Wizard.
Getting Started Registering your computer with Toshiba If an Internet connection could not be found, a window will display the message: “An Internet connection could not be chosen.” Click Next to continue. NOTE 6 If you are connecting your computer to a network, consult your system administrator before you choose your computer name and network settings. Follow the remaining screen prompts to complete the setup process. Once you click the final screen, your computer restarts automatically.
Getting Started Adding optional external devices 49 Adding optional external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 47.
Getting Started Connecting to a power source Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury. Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury.
Getting Started Connecting to a power source 51 To connect AC power to the computer: 1 Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. 2 Plug the AC adaptor cord into the DC-IN on the back of the computer.
Getting Started Connecting to a power source 3 Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows blue. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
Getting Started Charging the main battery 53 Charging the main battery Your computer came with its battery already installed. Before using the battery to power the computer, you must charge the battery. To charge the battery, leave the computer plugged into an AC power source with the computer turned off until the battery light glows blue. After that, the battery will be completely charged and ready to power the computer.
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 Press the display release button. 2 Lift the display panel. (Sample Illustration) Opening the display panel NOTE When opening or closing the LCD display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the LCD display panel.
Getting Started Using the computer for the first time 55 Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate.
Getting Started Using the computer for the first time Turning on the power To turn on the computer: 1 Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready. 2 Check to ensure that all optical drives are empty. 3 Press and hold the power button in until the power button and the on/off light on the system indicator panel glow blue—about one second.
Getting Started Adding memory (optional) 57 Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software.
Getting Started Adding memory (optional) The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. If the computer is on, begin at step 1; otherwise, skip to step 3. 1 Click Start, and then Turn off computer or Shut Down (depending on the system).
Getting Started Adding memory (optional) 6 59 Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover. Front of computer (Sample Illustration) Unscrewing the memory module slot cover 7 Remove the memory module slot cover. 8 Place the cover in a safe place so that you can retrieve it later. Static electricity can damage the memory module.
Getting Started Adding memory (optional) 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 10 Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of “Removing a memory module” on page 63. NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.
Getting Started Adding memory (optional) 61 12 Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket 13 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Getting Started Adding memory (optional) Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Memory slots Front of computer (Sample Illustration) Inserting the memory module into the slot 14 Replace the memory module slot cover and secure it using the screw. 15 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 129.
Getting Started Adding memory (optional) 63 You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described in “Checking total memory” on page 65.
Getting Started Adding memory (optional) 2 Pull the latches away from the memory module. The memory module pops up slightly. NOTE 3 If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module. Gently lift the memory module to a 30-degree angle and slide it out of the slot.
Getting Started Using the Dual Mode Pad 8 65 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel, Performance and Maintenance, and then System. 2 The General tab view automatically appears and shows total memory.
Getting Started Using the Dual Mode Pad Virtual buttons Mode switch button Volume control bar 1 2 3 Virtual buttons (Sample Illustration) Virtual buttons on the Dual Mode Pad NOTE Activating the Dual Mode Pad will deactivate an external mouse.
Getting Started Using the Dual Mode Pad 67 The virtual buttons cannot be used until the mode switch button is tapped again. The virtual buttons and Dual Mode can be enabled or changed in the Mouse Properties dialog box. Enabling Dual Mode To enable Dual Mode: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Mouse. The Mouse Properties window appears. 3 Click the Device Settings tab, then Settings. The Properties for Synaptics LuxPad window appears.
Getting Started Using external display devices To configure a virtual button: 1 Perform steps 1-5 in “Enabling Dual Mode” on page 67. 2 Select the virtual button you wish to configure. 3 Select the desired options, then click OK. 4 Click OK. 5 Click OK to close the Mouse Properties window.
Getting Started Using external display devices 69 Connecting the display device If you are connecting a television or other video display device to the computer’s HDMI Out port, first refer to “Selecting video cables” on page 69 for guidelines on choosing a video cable, then refer to “Connecting a plasma television or VCR/DVD player” on page 70.
Getting Started Using external display devices Connecting a plasma television or VCR/DVD player To connect a plasma television or VCR/DVD player to the computer: 1 Connect one end of an HDMI cable (not included with your computer) to the HDMI Out port on the back of your computer, and then connect the other end of the cable to your television. Refer to the manual that came with the television for more information. 2 Turn on your computer.
Getting Started Using external display devices 71 Toslink 1/8" (3.5mm) mini plug on one end and a plug compatible with your sound system on the other end. Connecting a standard television, projector, or VCR/ DVD player To connect a standard television, projector, or VCR/DVD player: 1 Connect one end of an S-video cable (not included with your computer) to the external video device. Refer to the documentation provided with the device for the location of its Video In port.
Getting Started Using external display devices Adjusting the Display Properties When using the S-video display port, the desktop shown on your TV may be larger than the screen can show. As a result, you may have to adjust the Display Properties to show the entire desktop on the TV without having to pan the display. To adjust the display properties 1 Right-click on the Windows Desktop and click Properties. The Display Properties dialog box appears.
Getting Started Using external display devices 73 Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen or to display anything on your computer screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer. 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device. 4 Turn on or restart the computer.
Getting Started Using external display devices ❖ TV (or other external video device) only ❖ Built-in display and external monitor (extended desktop) ❖ Built-in display and TV (extended desktop) (Sample Image) Display options window NOTE The dual display modes (internal display and external device) cannot be used while you are watching an HD DVD. NOTE The right-most icon in the above illustration is for the Swap Image Display mode.
Getting Started Connecting External AV Input Devices 75 Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device.
Getting Started Connecting External AV Input Devices computer is off, launch QosmioPlayer (refer to“Using QosmioPlayer” on page 156). Connecting to the S-video In port You can connect an external input device such as a VCR/ DVD player or game console to the S-video In port on the right side of your computer. NOTE S-video cables are not included with your computer. To connect a device to the S-video In port, you will need to purchase an S-video cable.
Getting Started Connecting External AV Input Devices 77 4 Connect the device’s power cable to a live electrical outlet. 5 Turn on your computer. 6 Turn on the external device. 7 Press the TV button above the keyboard. The QosmioPlayer TV application starts. 8 If necessary, change the input source by pressing the i key repeatedly until Composite In is selected.
Getting Started Using an external keyboard Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB ports support any USBcompatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s builtin Dual Mode Pad. You can use a USB-compatible mouse. NOTE After logging on to your system, the mouse cursor may move to the upper-right side of the screen.
Getting Started Connecting a printer 79 If your printer supports Plug and Play, your computer will automatically recognize the printer; the printer is then ready for use. Refer to your printer documentation for further instructions. TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation. If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page 79.
Getting Started Connecting an optional external diskette drive 2 Click Add a printer. The Add Printer Wizard appears. (Sample Image) Add Printer Wizard 3 Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5inch diskettes. (Sample Illustration) Optional external USB diskette drive 5.375 x 8.375 ver 2.
Getting Started Turning off the computer 81 To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. (Sample Illustration) Connecting an optional external USB diskette drive Turning off the computer Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in-use light are off.
Getting Started Turning off the computer Turn Off or Shut Down Factors to consider when choosing either Turn Off or Shut Down: ❖ Use the Turn Off command if you are using Windows® XP Home, or either Windows® XP Professional or Windows® XP Media Center Edition (MCE) and are not connected to a domain server. ❖ Use the Shut Down command if you are using Windows® XP Professional and are connected to a domain server.
Getting Started Turning off the computer 83 ❖ Restarting from Hibernation takes less time and consumes less main battery power than restarting from turning off the computer. ❖ Since information is being retrieved from the hard disk rather than from memory, restarting from Hibernation takes a little more time and consumes more main battery power to start up than when restarting from Standby.
Getting Started Turning off the computer ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Standby command and the main battery discharges fully, your unsaved information will be lost. Be sure to save your work first. For information on using Standby, see “Using and configuring Standby mode” on page 89.
Getting Started Turning off the computer 85 Shut Down For Windows® XP Professional when connected to a domain server, follow these steps to turn off the computer: 1 Click Start, and then Shut down. The Shut Down Windows® dialog box appears. 2 Select Shut down from the drop-down list. 3 Click OK. The computer shuts down completely. Turning off the computer more quickly You can also turn off the computer by pressing the power button.
Getting Started Turning off the computer 4 Select the options you want from the drop-down lists. ❖ When I press the power button Set this option to Shut down if you want the computer to shut down when you press the power button. ❖ When I close the lid Set this option to Shut down if you want the computer to shut down when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 270.
Getting Started Turning off the computer 87 Using and configuring Hibernation mode To turn off the computer using the Hibernation command, click Start, Turn off computer, and then select Hibernate. ® (Sample Image) Turn off computer Windows dialog box The computer saves the state of all open programs and files, turns off the display, and then turns off. Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel.
Getting Started Turning off the computer 4 Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. ❖ When I close the lid Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 270.
Getting Started Turning off the computer 89 Using and configuring Standby mode To turn off the computer using the Standby command, click Start, Turn off computer, and then select Stand By. ® (Sample Image) Turn off computer Windows dialog box The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode.
Getting Started Turning off the computer 4 Select Standby for the options you want. ❖ When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby if you want the computer to go into Standby mode when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 270.
Getting Started Caring for your computer 91 Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Taking care of your battery” on page 130. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer.
Getting Started Caring for your computer Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: 1 Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See “Saving your work” on page 101 for further information.
Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. ❖ Scan all new files for viruses.
Learning the Basics Using the keyboard 95 Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys, providing all the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page.
Learning the Basics Using the keyboard Your computer’s keyboard has only one Enter and one Ctrl key. Most of the time, this does not matter. However, some programs assign separate functions to the right and left Ctrl and Alt keys, or to the regular and numeric pad Enter keys on the full-sized keyboard. Using the Fn key, you can simulate these separate keys, as follows: ❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard.
Learning the Basics Using the keyboard 97 Windows special keys Windows key Application key (Sample Illustration) Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Windows key—Opens the Start menu ❖ Application key—Has a similar function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. To disable the numeric overlay, hold down the Fn key and press F11 again. The numeric mode light on the keyboard indicator panel goes out.
Learning the Basics Starting a program 99 The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows® WordPad program as an example: 1 Click Start, and then All Programs.
Learning the Basics Starting a program 3 Click Windows Explorer. 4 Click My Computer to expand the window. 5 In the left part of the window, click the line that ends in “(C:).” 6 In the left part of the window, under the C: icon, doubleclick the folder containing the program, in this case Program Files. Windows® Explorer shows the contents of the Program Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder.
Learning the Basics Saving your work 2 101 In the Run dialog box: ❖ If you know the program’s location, type the command line. For a program in the Windows® folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: c:\Program Files\Windows NT\Accessories\wordpad.exe, then click OK. HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list.
Learning the Basics Saving your work Saving files 1 In your Windows® application, click File, and then Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name. (Sample Image) Save As dialog box 2 Choose the drive and folder where you want your file to be stored.
Learning the Basics Printing your work 103 File names The Windows operating system supports long file names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and '. File names are not case-sensitive.
Learning the Basics Backing up your work To print a file: 1 If your printer is not on, turn it on now. 2 In your Windows® application, click File, and then Print. The program displays a Print dialog box. (Sample Image) Print dialog box 3 Specify the print parameters. For example, the range of pages and number of copies to print. 4 Click Print. Backing up your work Back up all the files you create in case something happens to your computer.
Learning the Basics Using the optical drive 105 HINT: Backing up all the files on your hard disk may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive. Small files can be backed up on diskettes if an optional external diskette drive is available. Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program.
Learning the Basics Using the optical drive TECHNICAL NOTE: Your optical drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs from that last region.
Learning the Basics Using the optical drive Play/ Pause Next track Stop/ Eject 107 Brightness Dolby® CD/ DVD Previous track Record TV Out TV (Sample Illustration) Media control buttons above the computer keyboard The TV button: ❖ Launches Windows Media Center and activates the TV interface, when the computer is powered on and Windows is running. While Media Center is running, the TV button has the same function as the My TV button on the Toshiba Remote Control.
Learning the Basics Using the optical drive The Play/Pause button starts playing the disc or makes it pause if currently playing. The Stop/Eject button stops a disc that is currently playing. The Previous track button returns to the preceding track on the disc. The Next track button skips to the following track on the disc. The Record button records television programs which are currently being viewed. The Brightness buttons adjust the screen brightness.
Learning the Basics Using the optical drive 5 109 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CD or DVD discs” on page 113. 6 Place the disc carefully in the disc tray, label side up. (Sample Illustration) Positioning the disc in the drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge.
Learning the Basics Using the optical drive Playing an audio CD If the computer is off, you can press the CD/DVD button to play the CD using QosmioPlayer (refer to “Using QosmioPlayer” on page 156 for more information). If the computer is turned on, Windows Media® Player opens and the CD begins to play. You can use the Windows Media Player program to control the CD. To access the Windows Media Player, you can open it through the Start menu or activate it from the Taskbar.
Learning the Basics Using the optical drive 111 The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.
Learning the Basics Using the optical drive and CD-Rewritable (CD-RW) discs; and DVD±R/±RW or DVD RAM discs. NOTE Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/ recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Learning the Basics Using the optical drive 113 Removing a disc with the computer off To remove a disc with the computer turned off: 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. 2 Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.
Learning the Basics Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 335. 5.375 x 8.375 ver 2.
Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power Battery Notice Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage.
Mobile Computing Running the computer on battery power 117 The computer also has an internal real-time-clock (RTC) battery. The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off. TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached. The RTC battery charges only while the computer is powered on.
Mobile Computing Charging batteries Charging batteries The battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Mobile Computing Charging batteries ❖ 119 The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes. HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity. Charging the RTC battery Your computer has an internal real-time clock (RTC) battery.
NOTE Mobile Computing Monitoring main battery power It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Mobile Computing Monitoring main battery power NOTE 121 If the AC power light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. See “Changing the main battery” on page 127 for information on replacing the main battery. HINT: Be careful not to confuse the battery light ( ), the on/ off light ( ), and the power button light (above the keyboard).
Mobile Computing Monitoring main battery power Determining remaining battery power NOTE Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. 1 Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. 2 Click the Toshiba Power Saver icon. The Power Saver Properties window appears.
Mobile Computing Monitoring main battery power 123 What to do when the main battery runs low When the main battery runs low you can: ❖ Plug the computer into an external power source and recharge the main battery ❖ Place the computer into Hibernation mode and replace the main battery with a charged spare ❖ Connect the computer to an optional high capacity battery (if available for your computer) ❖ Save your work and turn off the computer If you do not manage to do any of these things before the ma
Mobile Computing Monitoring main battery power Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖ How the computer is configured ❖ How much you use the hard disk, optical drive, diskette drives, or other optional devices ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖ Enabl
Mobile Computing Monitoring main battery power 125 Power Profiles You can choose a predefined Power Profile or select your own combination of power management options. To do this: 1 Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. The Toshiba Power Saver Properties window appears. (Sample Image) Toshiba Power Saver Properties window 2 Select an appropriate profile for your work environment or create your own custom profile.
Mobile Computing Monitoring main battery power Using a hot key to set the Power Profile You may use a hot key to set the Power Profile. To set the Power Profile: 1 Press Fn and F2 simultaneously to display the Power Profile pop-up window. (Sample Image) Power Profile pop-up window 2 While continuing to press Fn, press F2 until you select the desired Power Profile. The Power Profile options are: Full Power, AC Optimized, High Power, Normal, DVD Playback, Presentation, and Long Life.
Mobile Computing Changing the main battery 127 Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack and computer.
5 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock 6 Slide the battery release latch to release the battery. 7 Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Mobile Computing Changing the main battery 129 Inserting a charged battery To insert a battery: 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.
3 Mobile Computing Taking care of your battery Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock 4 Turn the computer right side up. 5 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 127. 6 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Mobile Computing Taking care of your battery 131 ❖ Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. ❖ Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. ❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery.
Mobile Computing Taking care of your battery 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adaptor to the computer and the power cord/cable to a power outlet.
Mobile Computing Disposing of used batteries 133 Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes damaged. Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven).
Mobile Computing Traveling tips Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-8228837. Notice regarding CR coin cell batteries, applicable to California, U.S.A. only: Perchlorate Material - special handling may apply. See http://www.dtsc.ca.
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows® operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system.
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray (Sample Image) Windows® operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Exploring Your Computer’s Features Exploring the desktop 137 The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer—The Microsoft® browser that provides access to the Internet.
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows. To make a program or window the currently active one, click the associated Taskbar button.
Exploring Your Computer’s Features Setting up for communications 139 Determining the COM port Your modem (available on certain models) is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Exploring Your Computer’s Features Setting up for communications Connecting the modem to a telephone line Your computer may come with a built-in modem (available on certain models) that can be connected to a standard voicegrade telephone line. The modem allows you to: ❖ Access the Internet. ❖ Communicate with your office’s local area network (LAN) or larger corporate wide area network (WAN). For specific information about connecting to a LAN or WAN, consult your network administrator.
Exploring Your Computer’s Features Setting up for communications 2 141 Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack NOTE Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX). Never connect the built-in modem to a key telephone system for residences or offices.
Exploring Your Computer’s Features Setting up for communications connecting to the network, consult your network administrator. ❖ While you are at home or traveling, you need a dial-up connection. Ask your network administrator for the telephone number of the network. Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations.
Exploring Your Computer’s Features Setting up for communications 143 5 Select the Properties icon. 6 Select the Do not use this device (disable) option from the Device usage drop-down. 7 Click OK. Your LAN port is now disabled. To enable the Ethernet LAN port, repeat steps one through four. Select the Use this device (enable) check box, and click OK.
Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and
Exploring Your Computer’s Features An overview of using the Internet 145 Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Exploring Your Computer’s Features An overview of using the Internet Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
Exploring Your Computer’s Features Exploring audio features 147 clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale. Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Exploring Your Computer’s Features Exploring audio features Positioning bar Record Stop Play Skip forward Skip backward (Sample Image) Sound Recorder screen 3 Click the Record button. 4 Speak normally into the microphone. 5 When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. NOTE You can only record 60 seconds at a time. 6 To hear what you just recorded, click the Play button.
Exploring Your Computer’s Features Exploring audio features 149 Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.
Exploring Your Computer’s Features Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use.
Exploring Your Computer’s Features Using PC Cards 151 Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. NOTE 1 Before removing a PC Card, make sure that no applications or system services are using the card. Prepare the card for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove.
Exploring Your Computer’s Features Using an ExpressCard™ Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online Help. Using an ExpressCard™ The ExpressCard™ slot supports the use of ExpressCard media.
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot 153 Removing an ExpressCard™ 1 Prepare the card for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later. If the card can be removed now, the system displays Safe to Remove Hardware. 2 Locate the ExpressCard™ eject button.
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot The Bridge Media Adapter slot may also support other types of media. For a complete list of supported media, visit Toshiba’s Web site at accessories.toshiba.com. NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of Windows. Inserting memory media The following instructions apply to all types of supported media devices.
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot 155 Removing memory media 1 Prepare the media for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware. 2 Gently press the card inward to release it.
Exploring Your Computer’s Features Using the i.LINK® port Using the i.LINK® port The i.LINK® port on the left side of the computer provides an extremely fast data transfer rate. In addition to high speed, the i.LINK® port also supports isochronous data transfer (the delivery of data at a guaranteed rate). This makes it ideal for devices that transfer high levels of data in real-time, such as video devices. As with USB ports, the i.
Exploring Your Computer’s Features Using QosmioPlayer 157 To start the QosmioPlayer: 1 If the computer is on, turn it off or place it in Hibernation mode. The computer must either be off or in Hibernation mode for QosmioPlayer to start. If the computer is powered on or in Standby mode, turn off the computer before trying to start QosmioPlayer. NOTE 2 Press the appropriate Media Control button on the system control panel: ❖ To watch television, press the TV button.
NOTE Exploring Your Computer’s Features Using QosmioPlayer The Record button only works when using the Windows Media Center Edition, and is not operational when using QosmioPlayer. Playing an audio CD Insert a supported audio CD into your optical drive. The QosmioPlayer automatically recognizes and plays supported CDs. When playing a supported audio CD, you also have the following keyboard options: 0-9 Press a number on your keyboard to play a specific track on the CD.
Exploring Your Computer’s Features Using QosmioPlayer 159 Playing a DVD Insert a supported DVD into your optical drive. The QosmioPlayer automatically recognizes and plays all supported DVDs. The Media Control buttons above the computer keyboard allow you to move to the previous chapter or next chapter, play or pause the movie, or stop the DVD. NOTE The following options must be supported by the DVD you are playing or they will not be available for use.
NOTE Exploring Your Computer’s Features Using QosmioPlayer Duplicated DVD discs may not play with QosmioPlayer. In addition, if any of the media are scratched or dirty, or not in compliance with standards, they may not play properly. TECHNICAL NOTE: Your optical drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times.
Exploring Your Computer’s Features Using QosmioPlayer 161 (Sample Image) Setup menu When viewing television programs, you have the following options: 0-9 Press a number on your keyboard to watch a specific channel. PAGE UP/ DOWN Press the PAGE UP key to scroll backward through channels, press the PAGE DOWN key to scroll forward through channels. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow the CTRL+DOWN Arrow keys to decrease the volume.
Exploring Your Computer’s Features Using QosmioPlayer Toshiba Remote Control You can use your Toshiba Remote Control to play CDs, DVDs, and videos; to view pictures; and to watch television programs through QosmioPlayer. The remote control helps you navigate the QosmioPlayer windows on your computer just as a cable TV remote control navigates cable TV options or controls the playback of a movie in a VCR or DVD player.
Exploring Your Computer’s Features Using QosmioPlayer 163 Toshiba Remote Control Buttons Overview Power Microsoft® MCE shortcut buttons* Stop Rewind Pause Play Forward Replay Skip Back More Arrows OK Button Record* Start* Channel/ Page Control Volume Control Mute Recorded TV* Guide DVD Menu Live TV Numeric Keypad Clear Enter * This function not supported with QosmioPlayer (Sample Illustration) Toshiba Remote Control 5.375 x 8.375 ver 2.
Exploring Your Computer’s Features Using QosmioPlayer The remote control has the following buttons/functions depending on which mode you are using: Button Function TV Mode DVD Mode Audio Mode Power Turns the computer’s power on and off Turns the computer’s power on and off Turns the computer’s power on and off Play None Plays the current DVD Plays the current CD Pause None Pauses the current DVD Pauses the current CD Stop None Stops the DVD currently playing Stops the CD currently pl
Exploring Your Computer’s Features Using QosmioPlayer Button 165 Function TV Mode DVD Mode Audio Mode Left arrow Moves the cursor left one selection within QosmioPlayer menu Moves the cursor left one selection within QosmioPlayer menu None Right arrow Moves the cursor right one selection within QosmioPlayer menu Moves the cursor right one selection within QosmioPlayer menu None OK Accepts the current selection within QosmioPlayer menu Accepts the current selection within QosmioPlayer menu N
Exploring Your Computer’s Features Using QosmioPlayer Using the Toshiba Remote Control To begin using your remote control: 1 Point the remote control at the remote control sensor. The remote control sensor is located on the front of your computer. Make sure there is nothing blocking the path between your remote control and the remote control sensor. 2 If your computer is powered on, turn it off or place it in Hibernation mode.
Exploring Your Computer’s Features Installing the QosmioPlayer Recovery media 167 Installing the QosmioPlayer Recovery media To recover or repair QosmioPlayer on a computer that has the application installed: 1 Insert the QosmioPlayer Recovery media into the drive, close the drive tray, and restart your computer from the CD. 2 Press the 1 key on the computer’s keyboard to recover to the initial configuration. 3 Follow the on-screen instructions to complete the recovery.
Chapter 5 Getting to Know the ® Windows XP Media Center Edition 2005 This section introduces you to the Windows® XP Media Center Edition 2005, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup 169 Media Center Setup This section shows you how to set up your computer to use the Media Center. There are many different methods you can use to connect your television and computer which are covered in the following sections. Connecting to a Television Your computer has TV-out capability, meaning you can connect it to a television and view the computer image on the television.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Some stations may not come in clearly if the signal is not strong enough. If you do not have a Set-top box, you may need to purchase a signal amplifier which may help boost and improve the cable signal. Contact your service provider for the proper hardware recommendations. NOTE There are two different ways you can connect your computer to a TV: 1 Turn off the computer.
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup 171 Connecting the TV Signal Source When You Have an Existing Setup This section describes how to connect the signal source from the wall to a VCR/DVD player to a TV using two coaxial cables (not shipped with your computer or system). 1 Remove the coaxial cable from the VCR/DVD player input, and connect it to the input of a coaxial cable signal splitter (not shipped with your computer or system).
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Add the notebook with a splitter Existing setup Wall Wall Cable Cable Set-top box/ satellite In Coaxial cable Set-top box/ satellite In IR transceiver IR transceiver control cable Set-top box/ satellite Out Set-top box/ satellite Out Splitter In (Splitter not included) Coaxial cable VCR/DVD Player In Splitter Out VCR/DVD Player In Coaxial antenna adapter to coaxial antenna in on the back of the computer Coaxial
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 173 3 Install batteries in the remote control. (For an illustration of the set-up described above, see page 172.) 4 Run the Media Center Setup wizard (see “Starting the Media Center” on page 173). The wizard will walk you through the setup process to configure your TV signal.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center To complete the Media Center Setup, follow the wizard’s onscreen prompts. For more information, see the Microsoft XP Media Center Edition Help file on your computer: 1 Click the help icon located at the top of each screen. 2 Click Help - Get help using Media Center. 3 Click Set up Media Center. (Sample Image) Media Center Setup Wizard: Welcome screen 1 Click Next.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 175 7 Click Yes to verify that your Internet connection is always on. 8 Click Next. The wizard displays the Test Your Internet Connection screen. 9 Click Test to verify that your computer is connected to the Internet. ❖ If the connection is not working, the wizard displays an error message. Recheck both ends of your connection and click Test.
NOTE Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center When you set up the TV Signal and identify the Set-top box remote, you may receive a “Remote Not Recognized” message. When this occurs, you must select the Have Media Center Learn My Remote Again From Scratch option. When you get to the Test Channel Changing option, the set up program asks you to use the remote. To change the channels, you use the numbers on your keyboard.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 177 18 Use the numeric keys on your keyboard to enter your ZIP code, then click Next. The wizard displays the Download Provider Information screen. The Media Center connects to the Internet and begins to download information about your local TV provider. The screen displays a message when the download is complete. 19 Click Next. The wizard displays the Select TV Signal Provider screen.
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center 27 Click Keep my current settings and continue, then click Next. The wizard displays the Adjust Your Display Settings screen. 28 Click Finish this wizard, then click Next. The wizard displays the You Are Done! screen. 29 Click Next. The wizard displays the Optional Setup screen. 30 Select Set up your speakers, and then click Next. The wizard displays the Welcome to Speaker Setup screen. 31 Click Next.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center 179 Using Media Center NOTE You can run Media Center side by side with other Windows software programs. It is possible to browse through your pictures, watch videos, play music, and even record TV while using other Windows programs. Simply resize the Media Center window as you would any other window. For more information, refer to the online Help.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help. Home screen Back Help (Sample Image) Title Bar Icons Use the Media Playback controls at the bottom of the screen to control your movies, music, and photo displays.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center 181 Navigating Media Center In the Media Center windows, a selected item, such as a folder, file, or menu item is outlined with a green border. To select items, use the arrow buttons on the remote control, and then the OK button to enter your selection. If you have media playing, such as music or a television program, it displays in an inset window in the lower left corner.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Toshiba Remote Control Buttons Overview Power Microsoft® MCE shortcut buttons* Stop Rewind Pause Play Forward Replay Skip Back More Arrows OK Button Record* Start* Channel/ Page Control Volume Control Mute Recorded TV* Guide DVD Menu Live TV Numeric Keypad Clear Enter * This function not supported with QosmioPlayer (Sample Illustration) Toshiba Remote Control 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center 183 The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode. If the computer is running Windows or Media Center, pressing Power turns off the computer. My TV — Launches the My TV window of Media Center. My Music — Launches the My Music window of Media Center. My Pictures — Launches the My Pictures window of Media Center.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Forward — Moves media (video, DVD, music, and so on) forward. To stop forward progress of the media, press Play. Skip — Moves media (video, DVD, music, and so on) forward. More — Provides more details on a TV program than is listed in the Guide. OK — Selects the desired action or window option. It acts like the Enter key. If you are watching TV, press OK to switch back to the previously viewed channel.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ 185 Navigation and direct access — The navigation buttons move the cursor around to select desired action or window options. much like a mouse does. The other direct access buttons open specific windows within Media Center such as recorded TV programs, the Television Program Guide, a DVD main menu, and live TV. ❖ Audio and Video — The audio and video buttons control sound and channel selection.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Media Playback Buttons These buttons allow you to play back picture slide shows, music files, playlists, music CDs, DVD movies, home videos, and live TV (so long as a TV source is connected to the computer) from within Media Center. Use Pause to pause selected media. Press Pause and then Forward repeatedly to play media frame by frame in slow motion. To continue slow motion, you must press the Forward button more than once.
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ Moves the video backward ❖ Moves live TV program to the beginning of the 30-minute pause buffer 187 Use Stop to stop selected media from playing. When this is pressed while you are watching TV, the Media Center pause buffer continues to record in the background. Use Next to move forward in the selected audio or video file. ❖ For music, Next moves to the next track. ❖ For DVDs, Next moves to the next chapter.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Watching Television Programs NOTE Before you can watch TV using Media Center, make sure your computer is set up correctly for your TV signal source and that you have completed the Media Center setup wizard. NOTE The TV Tuner will function only in the country where the computer was purchased.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 189 ❖ Record a single TV show or an entire series (my TV will manage the recordings for you and give advanced warning if there are any recording conflicts) ❖ Create a recorded TV library ❖ Quickly check which TV shows you have scheduled to record ❖ View and record movies ❖ Search for TV shows by title, keyword, or category NOTE If your computer enters Standby mode while you are viewing television, and you re
4 Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Use the arrows on the remote to scroll through the list of current television programs and channels available from your television service provider. The TV Guide displays the channel and network, as well as the show title and scheduled time block. The number of days displayed depends on your television service provider.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 191 Watching a Recorded TV Program Recorded TV is the storage place for all your recorded programs. In the Recorded TV window, you can sort your shows by name, date, or status. You can also delete a recorded program or series of programs and check for any recording errors.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs 4 Select Scheduled to view a list of all programs scheduled to be recorded. Use the Sort by Date and Title options to sort the scheduled programs, if needed. Use the arrow buttons to move through the list, select a program, and then press OK on the remote control. Select the option, and make the required changes. 5 Press OK. NOTE You can resolve recording conflicts on the Scheduled screen.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV ❖ 5 193 Select Keyword. Use the keys on your keyboard to enter a descriptive word that would appear in a program title or program description, and then press OK on the remote control. Media Center displays the search results. Use the arrow buttons to scroll through the search results, select a show, and then press OK. If the show appears multiple times, select a time and press OK.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV If there is a recording conflict or error, the Record Conflict icon appears next to the show in the TV Guide. This means the show will not be recorded unless the conflict is resolved. NOTE You can resolve recording conflicts on the Scheduled screen. Recording TV tips ❖ If you are watching live TV during a scheduled recording time, you can watch only the show being recorded. If you change channels, the recording stops.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV 195 manually update the Guide before scheduling a recording. NOTE If you turn off your computer, the Media Center will not record a scheduled program. Your computer must be turned on or in Standby mode to record a TV program. The computer will not automatically go into Standby mode if the Media Center is open.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Recording from Search To record a current or future show or series using Search: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My TV. 3 Select Search. 4 Select Title, Keyword, or Categories. For Title and Keyword searches, enter your descriptive search words. The Media Center starts searching from the first letter you type into the text box.
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV 197 Recording Manually Recording a program manually allows you to select a specific date, channel, and recording time period. For some programs, you may want to begin recording before the scheduled beginning and after the scheduled ending of the program. To manually record a show or series: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My TV.
❖ Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Change your ZIP Code to receive the correct Television Program Guide for your area To change settings, on the My TV screen, click Settings. This window allows you to change several settings that control how Media Center plays and records TV programs, as well as how it plays DVDs.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 199 7 Use the up or down arrow on the screen to move a scheduled series up or down in the list of series priorities. 8 Select Done to save changes and return to the Schedule Series page. Listening to Music The My Music window in the Media Center works with Windows Media® Player to find and play your music files and CDs.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 1 Click Start on the Taskbar, and then click Windows Media Player. 2 Click the Library tab at the top of the window. The first time you select the media Library, a message tells you that Windows Media Player needs to search your computer for your music files. 3 Click Yes. Windows Media Player searches for all available audio media and places them in the Media Library.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 201 Adding Music from Your Hard Drive to Windows Media Player Library You can place all your music files into the My Music folder or into other folders on your hard drive, however, you need to add those files to the Windows Media Player Library for Media Center to be able to find and play them. You may have already copied and organized your music files on your hard drive.
5 Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Click Search. Windows Media Player searches the selected drives for all supported audio files and adds them to the Media Library. If Windows Media Player does not recognize all of your audio files, try copying the files directly into Windows Media Player. Refer to Windows Media Player Help for more information. Your music files can now be found and played in the My Music window in the Media Center.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 3 203 Insert a CD into the CD drive — the CD plays automatically in Media Center. If you have other media such as live TV already playing when you insert the CD, Media Center asks you if you want to play the CD. Select Yes to begin playing the CD. Media Center cannot be used to record music files. Use Windows Media Player to record music files.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 4 Use the arrow keys to select a music file, press OK on the remote, and then press Play on the remote control to begin playing that music file. NOTE If you back up music files from a CD using Windows Media Player, you must log the files into the Media Player’s play list before you can play them using the Media Center.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 205 Setting Up an Automatic Disc Jockey You can select to have Media Center randomly play all the available songs in one genre: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My Music. 3 Select Genres. The list displays all the genres available in your Media Library.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music ❖ Shuffle (rearrange the play order of the music tracks on the album) ❖ Repeat (play the album again) ❖ Play (play the selected album) ❖ ❖ Buy Music (connect to the Internet, find CD information, and buy music CDs) ❖ 5 NOTE When you select Play, the Now Playing window opens, and the album starts playing. To go back to Media Center, press Start on the remote control.
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music 207 To create a playlist: 1 Click Start on the Taskbar and select Windows Media Player. 2 Click the Library tab. 3 Left click the Now Playing list menu on the right side of the screen. 4 Select New List, then Playlist. 5 Drag the music files to the right side of the Media Player window. You can also select the music file and click the Add selection to the current list icon.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures Displaying Your Pictures (Sample Image) Media Center main screen In My Pictures, you can: ❖ View pictures individually or as a slide show ❖ Change transition time and display order of the pictures in your slide show ❖ Sort pictures by name or date ❖ View and scroll through pictures that are in the My Pictures folder by using your remote control or your keyboard and mouse 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures 209 (Sample Image) My Pictures screen After you organize your pictures in the My Pictures folder in Windows Explorer, open Media Center to view your pictures: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My Pictures.
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures Viewing a Slide Show To view pictures as a slide show: 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select My Pictures. 3 Use the arrow buttons on the remote control to select the folder of pictures you want to view as a slide show, and then press OK.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies 211 Watching Your Digital Movies The My Videos window in the Media Center makes it easy to play home video files you created or video files you downloaded from the Internet.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies If not, move your videos into the My Videos or Shared Videos folder in Windows Explorer for Media Center to be able to find and play them. Once you have placed all your videos into the My Videos or Shared Videos folder, you can rename, add, delete, and organize them into folders. To organize and store your videos, click Start on the Taskbar, click My Documents, and then double-click the My Videos folder.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies 213 mouse to resize the window if you want to watch your video while doing something else on your desktop. 5 When the video is finished, select Restart and then press OK to replay the video. You can also select Done and press OK to close the file and return to the My Videos window.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD/HD DVD Watching a DVD/HD DVD Watching DVDs in the Media Center allows you to control the playback with your remote control. If you select to play your DVD in another program, the use of some of the remote control buttons is not supported. (Sample Image) Media Center main menu To play a DVD movie in Media Center: 1 Insert the DVD into the drive. If you have other media playing, Media Center asks if you want to play the DVD.
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD/HD DVD 215 Stopping a DVD Movie 1 Press the Stop button on the remote control to stop the movie. 2 Use the arrow buttons on the remote control to select an item on the Stopped menu, and then press OK. ❖ Select Resume to begin playing the DVD where you left off. ❖ Select Restart to begin playing the DVD at the beginning. ❖ Select Title Menu to go to the DVD main menu, if available.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing the Media Center Settings In the Media Center Settings window, you can change settings for watching television, for viewing your pictures and slide shows, and for controlling sound and the display of all the Media Center windows. (Sample Image) Media Center Settings screen The following section describes some of the more common settings that a user might want to change.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 217 Changing General Settings General settings affect each user’s experience in Media Center and can be changed only by the administrator of the computer. 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select Settings. 3 Select General.
4 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings ❖ Select Automatic Download Options to change your download settings (Download when connected, or Manual download). ❖ Select About Media Center to view information about the Media Center’s software version, terms of service, and data provider credits. ❖ Select Privacy to change settings for how the computer retrieves and stores media information.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 219 5 To change the TV/DVD settings on Recorded Storage or Recording Default screens, use the arrow buttons to select an option, and then press OK on the remote control. Use the arrows to select Save on the screen. Then press OK on the remote control again to enter the changes. 6 Press the Back button on the remote control to return to the main Settings menu.
❖ Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings In the Recorder Defaults window, select Until I watch as the Keep setting for each recorded show. Change TV Guide Settings In the Guide Settings, you can select which channels to display and you can manually update your Guide from the Internet. TV Guide settings are the same for each user and can be changed only by the administrator of the computer.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings ❖ 221 Select About Guide Listings to find out general Guide information and the date range of your current Television Program Guide. 5 Use the arrow buttons to select an option, and then press OK on the remote control. Make required changes, if any. 6 Press the Back button on the remote control to return to the TV Settings window.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings (Sample Image) General Settings Parental Controls screen 6 Use the arrow buttons to select Turn on movie blocking, and then press OK. 7 Use the arrow buttons to select Block unrated movies, and then press OK. 8 Use the arrow buttons to select the + or – area. Press the OK button on the remote control to scroll through the movie rating levels.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings 223 3 Select DVD. 4 In the DVD Settings window, select DVD Language. 5 Use the arrow buttons to select the + or – buttons. Press the OK button on the remote control to scroll through the languages available. When you find the one you want, use the arrow buttons to select OK in the window, and then press OK on the remote control.
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing Picture Settings Each user can set his or her own picture settings. 1 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. 2 Select Settings. 3 Select Pictures. (Sample Image) Picture Settings screen 4 Use the arrows and OK button on the remote control to select or deselect options. 5 Select Save. 6 Click OK. 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 More Programs 225 More Programs (Sample Image) Media Center main screen Use the options on the More Programs screen, available from the Media Center’s main menu, to perform the following tasks: ❖ Select Create CD/DVD to create a CD or DVD. ❖ Select InterVideo to view and adjust the InterVideo Video & Audio Settings screen. ❖ Select Messenger to sign into Media Center’s Messenger program.
Getting to Know the Windows ® XP Media Center Edition 2005 Online Spotlight (Sample Image) More Programs main screen Online Spotlight Use the Online Spotlight screen, available from Media Center’s main screen, to purchase and download music, DVDs, and movies, and read news and sports stories. Tips on Media Center are also available for viewing from this screen. 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Media Center Edition 2005 Getting Help for Media Center 227 Getting Help for Media Center Click the Help icon at the top left of the screen to access Media Center’s Help screen, which includes a number of links to helpful information on Media Center, as well as help for hardware problems. (Sample Image) Media Center main Help screen 5.375 x 8.375 ver 2.
Chapter 6 Using the TOSHIBA RAID Utility Using RAID RAID (Redundant Array of Independent Disks) is a utility that allows you to configure your computer to provide either improved performance in reading and writing data on the computer’s internal hard disks or greater reliability in storing data on the computer’s internal hard disks. Your computer supports two types of RAID: RAID-0 and RAID-1. Your computer can only be configured for one type of RAID at a time.
Using the TOSHIBA RAID Utility Using RAID 229 RAID-0 RAID-0 provides improved performance in writing data to or reading data from your computer’s internal hard disks. RAID-0 is configured by creating an array which specifies the hard disks which striped data will be written to or read from. For your computer, you will create an array consisting of the computer’s primary internal hard disk and secondary internal hard disk.
Using the TOSHIBA RAID Utility Using RAID RAID-1 RAID-1 improves reliability in storing data by automatically copying all data from your computer’s primary internal hard disk to your computer’s secondary internal hard disk. If your computer’s primary hard disk fails, you can replace the failed primary hard disk with the secondary hard disk that contains the mirrored data. See “Restoring a failed drive in a RAID-1 array” on page 251.
Using the TOSHIBA RAID Utility Using RAID 231 hard disk capacity will appear to the operating system as only 40 GB. When you first start your computer Each time you start your computer you will be prompted to configure your computer for RAID-1 until one of the following occurs: ❖ The computer is ready to enable for RAID-1. See the steps on the following page. ❖ The computer is configured for RAID-0. See “Creating a new RAID-0 array” on page 233 for more information.
Using the TOSHIBA RAID Utility Using RAID (Sample Image) New HDD detected window 3 You can choose to use your secondary drive as a mirror (RAID 1) of the first drive, or not use RAID at all, and use the secondary hard disk as a second hard drive. If you wish to mirror the drive, proceed to step 4 below. If you wish to not use RAID and use the secondary hard disk as a second hard drive, click Cancel. You will need to then partition and format the secondary hard disk drive.
Using the TOSHIBA RAID Utility Creating a new RAID-0 array 5 233 Click OK. The computer begins creating the array by copying data from the primary internal hard disk to the secondary internal hard disk. NOTE RAID-1 configuration can vary in time to complete, depending on the size of the hard drives and the amount of data. NOTE If the operating system is shut down before the RAID-1 configuration is complete, the RAID-1 configuration will automatically resume when the computer is restarted.
Using the TOSHIBA RAID Utility Creating a new RAID-0 array Before configuring your system for RAID-0, make sure you back up all data on your computer’s hard drives onto another storage media. When a RAID-0 array is created, all data on both your primary and secondary hard disks is erased and cannot be recovered. Toshiba is not responsible for any loss of data on your hard disks. NOTE Your computer can only be configured for one type of RAID at a time.
Using the TOSHIBA RAID Utility Creating a new RAID-0 array 4 235 Press the right arrow key until the CD icon is highlighted; then, press Enter. The following menu is displayed: Your machine supports Redundant Array of Independent Disks (RAID). Please select the RAID level. 1. Factory Default Setup the computer ready to support mirroring function. You can use RAID Utility to configure two hard disks to become mirror of each other, in which the same data is written on both hard disks.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility TOSHIBA RAID Console Utility The TOSHIBA RAID Console utility provides a way to view and manage the RAID configuration on your computer and to check the status of the RAID array and physical drives.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility 237 An icon is shown for each RAID-1 array configured on the computer. On each array icon, an icon is displayed for each physical drive belonging to the array. RAID-0 When RAID-0 (striping) is configured, a single array icon and two physical drive icons are shown to represent the array and the physical drives associated with the array.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility RAID-1 When RAID-1 (mirroring) is configured, a single array icon and two physical drive icons are shown to represent the array and the physical drives associated with the array. The equal sign indicates that the data is mirrored (copied) from the internal hard disk to the secondary internal hard disk.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility 239 To define options for RAID: 1 Start the TOSHIBA RAID Console utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console. 2 Click Options. The Options dialog box appears. (Sample Image) Options window ❖ Check media—Allows you to enable and specify the frequency of automatic media checking. ❖ Rebuild configuration—Allows you to enable and set options for automatic array rebuilding.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility ❖ Enable write cache—During mirroring, data is copied from the computer’s hard disk to the secondary internal hard disk. ❖ If write caching is disabled, data is copied from the computer’s hard disk to the secondary internal hard disk one piece at a time. ❖ If write caching is enabled, data is copied from the computer’s hard disk to a temporary storage area (write cache).
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility ❖ 241 Enable S.M.A.R.T. — Detects predictable drive failures by monitoring the motor, head, and performance of the physical disk drives. S.M.A.R.T. logs a record in the Windows Event Viewer when performance of a physical drive is below specification values. See your Windows operating system online help for information on using Windows Event Viewer. ❖ You can also check the status of a hard disk drive on the TOSHIBA RAID Console.
2 Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility Double-click the array icon. The Array information window appears. (Sample Image) Array information window ❖ Array No. Identification number of array. ❖ Status—Indicates the status of the array. The contents which will be displayed are as follows: ❖ Optimal—The physical drives in the array are connected with the computer, are online, are in optimal status, and are not in the process of rebuilding data.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility 243 When RAID-0 is configured, the total hard disk capacity will appear to the operating system as twice that of the smaller of the two hard drives in the RAID configuration.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility (Sample Image) hard disk drive information window ❖ Status—Displays the status of the physical drive. ❖ Online—The drives are working in a normal state. ❖ Offline—The drive is not used, as it is not configured as the logical drive. ❖ Fail—The drive is disabled, as a failure has occurred on the drive. ❖ Locked—The drive is locked by password. ❖ Rebuilding—The drive is being rebuilt using data from the good drive.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility 245 Performing a media check on a RAID-1 array A media check compares the data of the mirrored hard drives in an array to determine if there are any errors. If an error is detected during a media check, the data will be restored on the secondary internal hard disk based on the data on the primary internal hard disk. A media check can only be performed on a mirrored array which is in an optimal state.
3 Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility Click Media Check. The Confirm media check window appears. (Sample Image) Confirm media check window 4 Click OK. The time required to complete a media check can vary depending on the amount of data to be checked. You may use the computer while performing a media check; however, the computer’s performance may be slower than usual.
Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility 247 To break the RAID-0 array: 1 Plug in the AC adapter and power on the computer. (The computer must be running on power provided by the AC adapter to perform these steps.) 2 Insert the Recovery DVD that shipped with your system into the computer’s CD/DVD drive. 3 Press F12 to display the boot menu. 4 Press the right arrow key until the CD icon is highlighted; then, press Enter.
5 Using the TOSHIBA RAID Utility TOSHIBA RAID Console Utility Press 1 and then press Enter to break the RAID-0 array. All data is permanently erased from both of your computer’s internal hard disk drives and the computer is restored to its default settings. NOTE This process takes takes approximately one hour to complete. Breaking a RAID-1 array (mirror) If you want to permanently stop using the secondary hard disk drive for mirroring, you must break the RAID-1 array (mirror).
Using the TOSHIBA RAID Utility Rebuilding the data on the secondary disk in a RAID-1 array 249 Rebuilding the data on the secondary disk in a RAID-1 array If the secondary hard disk has been removed from the computer and you want to resume using the secondary hard disk for mirroring, you must reinsert the secondary hard disk drive into the computer.
5 Using the TOSHIBA RAID Utility Rebuilding the data on the secondary disk in a RAID-1 array Click Mirroring. The Confirm disk mirroring window appears. (Sample Image) Confirm disk mirroring window 6 Click OK. 7 The Confirm disk mirroring window appears. (Sample Image) Confirm disk mirroring window 8 Click OK. The computer begins copying data from the internal hard disk to the secondary hard disk drive.
Using the TOSHIBA RAID Utility Restoring a failed drive in a RAID-1 array 251 Restoring a failed drive in a RAID-1 array If your computer’s primary hard disk fails the failed hard disk can be removed and replaced with the secondary hard disk that contains the mirrored data. Contact Toshiba Global Support Centre or a Toshiba Authorized Service Provider for assistance.
Using the TOSHIBA RAID Utility Error message examples Error message examples The following error messages may be displayed on the TOSHIBA RAID Console. Not enough memory available. Increase the available memory by shutting down one or more applications. Another user is working in administrator mode. Currently unable to use it. Another user is logged onto the computer as an administrator and using the TOSHIBA RAID Console utility.
Chapter 7 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter.
Toshiba Utilities TOSHIBA Assist TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the Toshiba Assist shortcut icon on the desktop. ❖ Click Start, All Programs, Toshiba, Utilities, and then Toshiba Assist. The TOSHIBA Assist window appears.
Toshiba Utilities TOSHIBA Assist 255 Connect The features available in this category are: ❖ ConfigFree ❖ Start Bluetooth® ❖ Bluetooth Settings ❖ Bluetooth Local COM Settings (Sample Image) Toshiba Assist window – Connect tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist Secure The features available in this category are: ❖ User password ❖ Supervisor password (Sample Image) Toshiba Assist window – Secure tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist 257 Protect & Fix The features available in this category are: ❖ PC Diagnostic Tool Utility (Sample Image) Toshiba Assist window – Protect & Fix tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist Optimize The features available in this category are: ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA SD™ Memory Card Format Utility ❖ TOSHIBA Power Saver ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Accessibility (Sample Image) Toshiba Assist window – Optimize tab 5.375 x 8.375 ver 2.
Toshiba Utilities Setting passwords 259 Setting passwords Setting a password lets you walk away from your computer, secure in the knowledge that nobody can access your files. When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Toshiba Utilities Setting passwords To unlock your system, press any key or touch the pointing device and the Windows® Logon screen will appear. Select your user name and enter your password, if any. Using a user password A user password provides instant password and power-on password protection. Setting a user password To register a password for the power-on password functions: 1 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears.
Toshiba Utilities Setting passwords 261 4 Click Delete. 5 Follow the on-screen instructions to remove the user password. Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Toshiba Utilities PC Diagnostic Tool Utility 3 Click the Supervisor Password icon. 4 Click Set. 5 Enter your password then enter it again to verify. 6 Click Set. 7 Click OK if you want to save the password to a text file on a diskette or media of your choice, or click Cancel to continue without saving the password to a text file. 8 Click OK to exit.
Toshiba Utilities Fn-esse® 263 The PC Diagnostic Tool window appears. (Sample Image) PC Diagnostic Tool window 2 Select the devices that you would like to test by clicking the check box that appears to the left of the device. Click the + (plus) and - (minus) symbols to expand and collapse the categories. NOTE 3 Click Start Diagnostics when you are ready to begin the tests.
Toshiba Utilities Fn-esse® With Fn-esse, you can assign an Fn key combination to: ❖ Open a Windows® operating system program ❖ Open a file in its associated program ❖ Display a customized folder of programs and/or files from which to choose Fn-esse also has several keys, known as hot keys, that perform preassigned operations. For more information, see “Hot Keys” on page 338. You can assign any key that is not associated with a hot key or a keyboard overlay.
Toshiba Utilities Fn-esse® ❖ 265 Using the keyboard or pointing device The method most often used is drag-and-drop. Using drag-and-drop to assign a key To assign a key to open a program or document: 1 Start both Fn-esse and Windows® Explorer (or the program supporting drag-and-drop). 2 Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at the same time. 3 In the Explorer window, highlight the program or document file you wish to assign to a key.
Toshiba Utilities Fn-esse® ❖ Using the pointing device, move the cursor over the desired key in the Fn-esse window and press the secondary button. The Assignment Type dialog box appears. (Sample Image) Fn-esse assignment type dialog box Follow the instructions in “Making a direct key assignment” on page 266 or “Making a popup assignment” on page 267. Making a direct key assignment 1 Select Direct to display the Add/Edit Command dialog box.
Toshiba Utilities Fn-esse® 267 Making a popup assignment 1 Select Popup to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the All Programs menu. The right side lists the programs and documents in the folder. These are the items that will appear in the popup list.
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the Hotkey utility: 1 Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility. The TOSHIBA Hotkey window appears. (Sample Image) TOSHIBA Hotkey Utility window 2 Select the desired option(s). 3 Click OK. 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA SD™ Memory Card Format Utility 269 TOSHIBA SD™ Memory Card Format Utility This utility is used to format SD™ cards used with the Bridge Media Adapter slot. To format an SD memory card using this utility: 1 Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format, or click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist. The SD Memory Card Format screen appears.
Toshiba Utilities TOSHIBA Power Saver TOSHIBA Power Saver The TOSHIBA Power Saver is used for power management, enabling you to control your computer’s power usage, regardless of the source, and use the many preset power profiles, or create one yourself. To access TOSHIBA Power Saver: ❖ Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver, or click the Power Management icon in either the Optimize tab of TOSHIBA Assist or in the system tray.
Toshiba Utilities TOSHIBA Power Saver 271 Preset Power Profiles The preset power profiles are: ❖ Full Power ❖ AC Optimized ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require. The DVD Playback profile applies only when a DVD program is playing while running the computer on battery power.
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start, Control Panel, and then Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist. The Mouse Properties screen appears.
Toshiba Utilities Toshiba Hardware Setup 273 Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool available through the Windows® operating system. To access it: ❖ Click Start, All Programs, Toshiba, Utilities, Assist, or click the Toshiba Hardware Setup icon in the Optimize tab of TOSHIBA Assist. The Toshiba Hardware Setup screen appears.
❖ Toshiba Utilities Toshiba Hardware Setup Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5. For more information, see “Directing the display output when you turn on the computer” on page 73.
Toshiba Utilities TOSHIBA Zooming Utility 275 ❖ USB—Allows you to enable or disable USB Legacy Emulation ❖ LAN—Allows you to set networking functions ❖ Button Setting—Lets you set the startup logo and startup sound. By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system.
Toshiba Utilities TOSHIBA Zooming Utility (Sample Image) TOSHIBA Zooming Utility Properties screen 2 Select the desired option(s). 3 Click OK. The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the Fn key and press 2; to zoom out, hold down the Fn key and press 1. For more information about how to use the TOSHIBA Zooming utility, right click the icon in the Taskbar and then click Help. 5.375 x 8.375 ver 2.
Toshiba Utilities CD/DVD Drive Acoustic Silencer 277 CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. NOTE When you change the CD/DVD drive to “Quiet” mode, the setting is only valid for the current Windows session. If you shut down, restart, log off, or resume from hibernation, the setting will revert back to Normal speed.
Toshiba Utilities TOSHIBA Accessibility To access the utility: 1 Double-click the icon in the task tray, or click the CD/ DVD Drive Acoustic Silencer icon in the Optimize tab of TOSHIBA Assist. The CD/DVD Drive Acoustic Silencer screen appears. 2 Click Set Quiet Mode to make the drive run more slowly and quietly for listening to music or audio files on a CD. 3 Click Set Normal Mode to run the drive at normal speed for transferring data.
Toshiba Utilities Fingerprint Authentication Utility 279 To use TOSHIBA Accessibility: 1 Click Start, All Programs, Toshiba, Utilities, and then Accessibility, or click the Accessibility icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Accessibility window appears. 2 Check the Use Fn-StickyKey box. 3 Put a check mark next to the desired option. 4 Click OK.
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Enrollment Use the Enroll or Edit Fingerprints wizard to enroll new fingerprints or to update existing fingerprint samples. NOTE It is recommended that you complete the Fingerprint tutorial before starting fingerprint enrollment. The Fingerprint tutorial shows how to achieve the highest quality fingerprint samples. To enroll a new fingerprint: 1 Click Start, All Programs, Protector Suite QL, and then Control Center.
Toshiba Utilities Fingerprint Authentication Utility 281 If your system supports power-on security, a Power-on button is also displayed above each enrolled fingerprint. This button is shown pressed by default, indicating that your fingerprint is automatically added for power-on authentication. During fingerprint enrollment, the system displays icons as prompts, notifications, and warnings. These icons and their meanings are as follows: ❖ Reader ready—the reader is waiting to read your fingerprint.
Toshiba Utilities Fingerprint Authentication Utility The Fast User Switching feature of the Windows® operating system is also supported. If user A is logged on and the fingerprint utility verifies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches the users. If your system supports power-on security, existing fingerprint samples can be used also for power-on authentication.
Toshiba Utilities Fingerprint Authentication Utility 283 Power-on security can be configured to operate with the fingerprint logon feature. If a fingerprint used for power-on security matches a fingerprint in an existing passport, the corresponding user is logged on automatically without having to enter the Windows® logon password. NOTE Your hardware must support Power-on security to use the single logon feature. You must have administrative privileges to change settings.
Toshiba Utilities Fingerprint Authentication Utility Control Center The Control Center contains various functions for fingerprint management and for setting up your fingerprint software. Available options depend on the software status, used hardware, and installed applications. Fingerprints ❖ Enroll or Edit Fingerprints—Runs the fingerprint enrollment wizard.
Toshiba Utilities Fingerprint Authentication Utility ❖ 285 Fingerprint Storage Inspector—Opens the Fingerprint Storage Inspector dialog where you can see the contents of your fingerprint storage. Help ❖ Introduction—Displays the Introduction dialog with basic information about product features. ❖ Tutorial—Runs the fingerprint tutorial which shows you how to enroll your fingerprints. This tutorial is highly recommended for first-time users of this technology.
Toshiba Utilities Fingerprint Authentication Utility Swipe your finger to open Biomenu. If fingerprint verification is configured to invoke another action (e.g., display a registered page), press and hold the Shift key while swiping your finger. The Biomenu contains the following menu options: ❖ Lock computer—Locks your computer. Use the reader to unlock the computer again. ❖ Registered Sites—Displays a list of your Web pages registered by Password Bank.
Toshiba Utilities Fingerprint Authentication Utility 287 Replaying a registered Web page or dialog You are logged on to the computer and want to replay a registered Web page. To replay a registration: 1 Swipe your enrolled finger to display the Biomenu. 2 Select Registered Sites. 3 Select a page you want to display and replay, or simply verify your fingerprint if the page is already displayed.
Toshiba Utilities Fingerprint Authentication Utility Replaying a registered dialog You are logged on to the computer and want to replay a registered dialog. To replay a registration: 1 Display the dialog to be replayed. 2 Use the reader. 3 Optional—If the hint for replaying dialogs is displayed, confirm that you want to replay the registration. 4 The registration is replayed. Editing an existing registration Sometimes it is useful to edit an existing registration.
Toshiba Utilities Fingerprint Authentication Utility 289 Deleting a registration You are logged on to the computer and want to delete an existing registration. To delete an existing registration: 1 Click the Settings topic in the Control Center. 2 Click User Settings. Verify your fingerprint. 3 Select Registrations. 4 Select a registration. 5 Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory.
Toshiba Utilities Fingerprint Authentication Utility Care and maintenance of your fingerprint reader Failure to follow these guidelines and/or procedures might result in damage to the reader or cause reader failure, finger recognition problems, or lower finger recognition success rate. ❖ Do not scratch or poke the reader with your nails or any hard or sharp objects. ❖ Do not press the reader with too much pressure. ❖ Do not touch the reader with a wet finger or any wet objects.
Toshiba Utilities Fingerprint Authentication Utility ❖ 291 Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g., after taking bath) ❖ Injured finger ❖ Wet finger ❖ Soiled or oily finger ❖ Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate. ❖ Enroll two or more fingers.
Toshiba Utilities Fingerprint Authentication Utility Fingerprint reader limitations ❖ The fingerprint reader compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficiently unique characteristics in their fingerprints. ❖ A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration.
Chapter 8 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
2 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. 4 Close the remaining programs one by one by selecting the program name, then End Task.
If Something Goes Wrong Problems when you turn on the computer 295 To record the details: 1 Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. 2 Press Ctrl + C to copy the text to the clipboard. 3 Open Notepad (click Start, All Programs, Accessories and then click Notepad). 4 Press Ctrl + V to paste the details into Notepad.
If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again. Your computer may be in Standby mode and have a software or resource conflict. When this happens turning the power on returns you to the problem instead of restarting the system. To clear the condition, press Ctrl, Alt, and Del simultaneously.
If Something Goes Wrong Problems when you turn on the computer 297 If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information see “Charging batteries” on page 118. The computer displays the Non-System disk or disk error message. Make sure there is no diskette in the optional external diskette drive.
If Something Goes Wrong The Windows® operating system is not working slow, steady “trickle-charge” to the battery. Once the battery has been trickle-charged, it may begin working correctly again. If the trickle-charging does not prove effective, visit the Toshiba Web site at pcsupport.toshiba.com and see the Support Bulletin Step-Charging the computer’s battery (click the Ask Iris® link and search for the support bulletin by name).
If Something Goes Wrong The Windows® operating system is not working 299 ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
If Something Goes Wrong The Windows® operating system is not working ❖ Start Windows® normally ❖ Reboot ❖ Return to OS Choices (menu) See your Windows® documentation for further explanation. NOTE If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
If Something Goes Wrong Resolving a hardware conflict 301 The Windows® XP operating system can help you If the operating system has started properly but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access Windows® XP Help and Support: 1 Click Start, then click Help and Support. The Help and Support window appears.
If Something Goes Wrong Resolving a hardware conflict A plan of action The smooth operation of the system depends on the interaction of all devices, programs, and features. If the system or one of its attached devices is not working, resolving the problem can be time-consuming and frustrating. The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
If Something Goes Wrong Resolving a hardware conflict 303 Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
If Something Goes Wrong Resolving a hardware conflict 305 1 Click Start, Control Panel, then click Performance and Maintenance. 2 Click the Administrative Tools icon. 3 Double-click Computer Management, then click Device Manager. 4 To view the device(s) installed, double-click the device type. 5 To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs.
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: 1 Click Start, Turn off computer. 2 Click Turn Off. The operating system shuts down and turns off the computer automatically. 3 Remove the memory module, following the instructions in “Removing a memory module” on page 63.
If Something Goes Wrong Resolving a hardware conflict 307 Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional high-capacity battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries.
If Something Goes Wrong Resolving a hardware conflict If the battery light does not glow after 20 minutes, the battery may have reached the end of its useful life. Try replacing it. The battery appears not to power the computer for as long as it usually does. If you frequently repeat shallow charge and discharge, the battery meter may become inaccurate. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility.
If Something Goes Wrong Resolving a hardware conflict 309 keyboard. Refer to the software documentation and check that the program does not assign different meanings to any of the keys. You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard. Nothing happens when you press the keys on the external keyboard.
If Something Goes Wrong Resolving a hardware conflict problem, press Fn and F5 simultaneously again to return the display priority to its previous setting. HINT: Holding the Fn key and pressing the F5 key several times will advance you through the display options. If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet.
If Something Goes Wrong Resolving a hardware conflict 311 For more information see Windows® Help. A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display. To change the display properties: 1 Right-click in a blank area of the Windows® desktop. The Display Properties window appears.
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:).
If Something Goes Wrong Resolving a hardware conflict 7 313 Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures.
If Something Goes Wrong Resolving a hardware conflict The computer displays the Non-system disk or disk error message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette. Try another diskette. If you can access the second diskette, the first diskette (not the drive) is probably causing the problem.
If Something Goes Wrong Resolving a hardware conflict 315 If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical drive eject button on the face of the optical drive tray. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
If Something Goes Wrong Resolving a hardware conflict fed to the speakers and the speaker volume is too loud. Adjust the volume control. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
If Something Goes Wrong Resolving a hardware conflict 317 PC Card checklist ❖ Make sure the card is inserted properly into the slot. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine. If the card malfunctions again, it may be defective. Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead.
If Something Goes Wrong Resolving a hardware conflict own I/O base address. See “Fixing a problem with Device Manager” on page 304 for more information. Since all PC Cards share the same socket, each card is not required to have its own address. Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: 1 Double-click the Safely Remove Hardware icon on the System tray. 2 Select the item you wish to remove.
If Something Goes Wrong Resolving a hardware conflict 319 Printer problems This section lists some of the most common printer problems. The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray. Make sure the printer cable is firmly attached to the computer and the printer.
If Something Goes Wrong Resolving a hardware conflict Modem problems This section lists common modem problems. The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port. See “Determining the COM port” on page 139.
If Something Goes Wrong Resolving a hardware conflict 321 Wireless networking problems NOTE This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) networking. The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see Windows Help and Support or contact your computer technician.
If Something Goes Wrong Resolving a hardware conflict these will be very helpful if you should confer with a support technician at a later time. ❖ Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: 1 Click Start, Control Panel. 2 Double-click Network Connections. 3 Right-click the name of your wireless network connection, then click Properties. 4 Select Internet Protocol (TCP/IP), then click Properties.
If Something Goes Wrong Resolving a hardware conflict ❖ 323 ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter. ❖ If “Request Timed Out” or another error message appears in response, then the problem is probably Wi-Fi-related. If you have enabled any security provisions (closed system, MAC address filtering, Wired Equivalent Privacy [WEP], etc.), check the access point vendor's Web site for recent firmware upgrades.
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
If Something Goes Wrong DVD operating problems 325 5 Verify that your computer recognizes your optical drive by double-clicking the My Computer icon on the desktop. The optical drive should appear in the list. 6 See “Checking device properties” on page 304 for instructions on using Device Manager to view the optical drive properties. 7 Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
If Something Goes Wrong DVD operating problems DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: 1 Right-click the Desktop, select Properties. 2 Select the Settings tab. 3 Select the Advanced Flat Panel tab. 4 Click Disable Display Stretch Feature. 5 Click OK. The screen saver runs while you are watching a movie or title.
If Something Goes Wrong Develop good computing habits 327 Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 93 for instructions. On a regular basis, back up the information stored on your hard disk.
If Something Goes Wrong Develop good computing habits Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of selfhelp books you can use to supplement the information in the manuals.
If Something Goes Wrong Develop good computing habits 329 4 In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. 5 Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: 1 Click Start, and then Help and Support.
If Something Goes Wrong Develop good computing habits Backing up your data to CDs with Windows XP The most valuable component of your computer system is the data that you create and store on its hard drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a recent backup of your data.
If Something Goes Wrong Develop good computing habits NOTE 331 Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖ E-mail files and settings—for Outlook, Outlook Express, or other e-mail applications. Visit the vendors’ Web sites (www.microsoft.com, for example) for detailed instructions.
If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): 1 In Internet Explorer, click File, Import and Export. 2 The Import/Export Wizard will appear. Click Next. 3 Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.
If Something Goes Wrong Develop good computing habits 333 General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe® Photoshop®, or utility software such as special toolbars for your web browser). ❖ Create a Restore Point (refer to “Saving system configuration with Restore Points” on page 328).
❖ If Something Goes Wrong If you need further assistance Do one installation at a time. If you have several new items to add to your computer system, install just one at a time, creating Restore Points immediately before each successive installation. This will make it much easier to determine the origin of any new problems. For best results, follow this sequence: 1 Back up critical data. 2 Create a Restore Point. 3 Install one item of hardware or software. 4 Restart Windows.
If Something Goes Wrong If you need further assistance 335 ❖ If the problem occurs while you are running a program, consult the program’s documentation for troubleshooting suggestions. Contact the software company’s technical support group for their assistance. ❖ Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the complete detailed specifications for your computer, visit pcsupport.toshiba.com.
If Something Goes Wrong Other Toshiba Internet Web sites ❖ Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA accessories.toshiba.
If Something Goes Wrong Toshiba’s worldwide offices 337 Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041, Agrate Brianza Milano, Italy Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 338 5.375 x 8.375 ver 2.3.
Hot Keys Password security 339 Password security This hot key blanks the display. Fn + Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password The Fn + F1 key combination turns off the display and activates instant security.
Hot Keys Password security Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature. To set up a password with a screen saver, go to Windows online Help for instructions: 1 Click Start, and then Help and Support.
Hot Keys Power profile 341 Power profile Fn + This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the Toshiba Power Saver utility. For more information, see “TOSHIBA Power Saver” on page 270. Standby mode Fn + This hot key places the computer into Standby mode. A message box displays by default to confirm that the computer is entering Standby mode.
Hot Keys Hibernation mode Hibernation mode Fn + This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page 87. 5.375 x 8.
Hot Keys Display modes 343 Display modes Fn + This hot key cycles through the power-on display options.
Hot Keys Display brightness Display brightness Fn + This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness. Enabling a wireless device Fn + This hot key enables/disables the optional wireless devices on your computer (for systems with Wi-Fi or Bluetooth® only). The wireless modes are: Bluetooth enabled—This enables only the Bluetooth module. Wi-Fi enabled—This enables only the Wi-Fi module. Enable all devices—This enables all devices.
Hot Keys Disabling or enabling the Dual Mode Pad 345 Disabling or enabling the Dual Mode Pad Fn + This hot key enables/disables the Dual Mode Pad. For more information on using the Dual Mode Pad, see “Using the Dual Mode Pad” on page 65. (Sample Image) Disable and enable Dual Mode Pad windows Zooming applications in/out Fn + This hot key turns the Zooming utility to zoom-out. For more information, see “TOSHIBA Zooming Utility” on page 275. Fn + This hot key turns the Zooming utility to zoom-in.
Hot Keys Keyboard hot keys Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. Fn + This hot key turns the scroll lock feature on and off. Fn + This hot key switches screen resolution. [Space bar] 5.375 x 8.375 ver 2.3.
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia Europe AS approved VDA approved NEMKO approved 347 5.375 x 8.375 ver 2.
Appendix C ™ Using ConfigFree with your Toshiba Computer NOTE All references to Bluetooth® in this appendix are applicable only if Bluetooth is available on your system. ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks. NOTE For more information on using ConfigFree, see the ConfigFree online Help.
Using ConfigFree™ with your Toshiba Computer Getting Started 349 information about them on a virtual map. For more information, see “Search for Wireless Devices” on page 354. ❖ Profile Settings—The Profiles utility lets you switch between network configurations. For more information, see “Profile Settings” on page 360. ❖ ConfigFree SUMMIT—The ConfigFree SUMMIT utility is used to connect with other ConfigFree users for file sharing. For more information, see “ConfigFree SUMMIT” on page 363.
NOTE Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 351 (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 353 If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location. You can also view the possible cause and solution for the problem by clicking the exclamation point.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth® devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: 1 Click the icon in the system tray. 2 Click Search for Wireless Devices. A virtual map appears with a graphical representation of the wireless devices that have been detected.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 355 (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection NOTE This feature is only supported on systems running Windows XP SP2. To add a new wireless connection to an Access Point: 1 Open the Search for Wireless Devices option from ConfigFree Launcher. 2 Drag and drop the device you want to connect to the computer icon at the center of the map. The Wireless Settings screen appears. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen 3 NOTE Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection list, the system displays the Connection screen rather than the Wireless settings screen. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 357 Creating a detected device wireless connection The following screen shows an example of Bluetooth® devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Transferring files using Bluetooth® There are several ways to use Bluetooth® to send files to other devices. To select the device using the Bluetooth® radar screen: ❖ Open the Bluetooth® radar screen. ❖ Drag and drop the file directly onto the icon for that Bluetooth® device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 359 Or, you can right-click the file and select Send to Bluetooth Devices. (Sample Image) Selecting Send to Bluetooth® Devices option 2 Choose a file recipient. 3 Click Send. NOTE During a file transfer, connecting and disconnecting to the selected device will occur automatically. Disconnecting from a Bluetooth® device To disconnect from a Bluetooth® device: 1 Place the cursor on top of the connected line.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree profiles are useful for easily switching network settings and devices.You can switch network settings simply by selecting the profile with the desired settings. If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 361 To create a profile: 1 Click the icon in the system tray. 2 Move the pointer to Profile. 3 Click Add. The Add Profile screen appears. 4 Select Capture and click OK. The Add Profile screen appears. 5 Enter the name of the profile you want to create. 6 Enter any optional comments, if desired. 7 Click Change Icon and select an icon for this profile.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Expanded Add Profile screen NOTE The online Help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported. This feature is useful when transferring profile settings to other computers.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 363 ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email. Use this utility, which handles files regardless of size, to distribute presentations, reports, or music files to meeting attendees or to users at different locations.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon. NOTE Only the SUMMIT Host (the initiator) can share files with multiple users by this method. SUMMIT users can share a file with only one other user. (Sample Image) Sharing a file with one user 5.375 x 8.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 365 ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. NOTE If you are the Host of the summit, and drag a file to the center of the SUMMIT table, it will automatically be sent to all SUMMIT users who can then accept or decline the file as desired.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: 1 Click the icon in the system tray. 2 Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE 3 Select the appropriate users and invite them to the SUMMIT meeting. As users join the SUMMIT, their icons appear on the SUMMIT table.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 367 Quick Connect The Quick Connect feature includes two options: ❖ Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector ❖ Direct Link Toshiba Device. Launches ConfigFree SUMMIT Toshiba Wireless Projector The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector.
4 NOTE Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click OK. Because the wireless LAN’s default connection setting is for Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’s connection setting to Infrastructure mode to match the settings on the projector.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ 369 If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: 1 Display the ConfigFree menu. 2 Select the ConfigFree Link option from the Direct Link Toshiba Device submenu.
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home. The Auto Switch feature contains options for automatically switching between wired and wireless devices.
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature 371 Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile. To use the Semi-Automatic Switch feature: 1 Right-click the icon in the system tray. 2 Click Auto Switch.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide.
Glossary DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc 373 DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IEEE Institute of Electrical and Electron
Glossary RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may appear in this user’s guide.
Glossary 375 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
C Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD — An individual compact disc. See also CD-ROM. CD-ROM (compact disc read-only memory) — A form of highcapacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM.
Glossary 377 CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor — A symbol that indicates the current position on the screen. The shape of the cursor varies, depending on the program you are using and what you are doing.
Glossary disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data. Diskettes can be removed from the computer and come in two sizes: 5.25-inch and 3.5-inch. Your computer uses 3.5-inch diskettes. See also double-density diskette, high-density diskette.
Glossary 379 executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities. Other names for an expansion device are port expander, port replicator, docking station, or network adapter. extension — See file extension. external device — See device.
Glossary G ground — A conductor to which all components of an electric circuit are connected. It has a potential of zero (0) volts, is connected to the earth, and is the point of reference for voltages in the circuit. H hard disk — A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than diskettes and are used for long-term storage of programs and data.
Glossary 381 Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. K keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L L1 (level one) cache — Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache.
Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Glossary 383 optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. P palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel.
Glossary properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. R RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM. random access memory — See RAM. read-only memory — See ROM. reboot — See boot, restart.
Glossary 385 shortcut — See keyboard shortcut. software — See program. Compare hardware. Standby — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. striping — Also called RAID 0, in which files are broken into stripes of a defined size in an array, and are sent to each disk which makes up the array.
Glossary utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. W V Web — See World Wide Web. Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Index A AC adaptor 49 AC power connecting adaptor 51 accessories memory 57 adding memory 57 adjusting recording quality 148 Alt keys 96 antenna connecting 75 audio .
Index charging the battery 53 checking device properties 304 communications network connection 141 set up 138 system resources 302 compact discs handling 109 inserting 108 removing 112, 113 computer caring for 91 cleaning 91 moving 91 non-system disk or disk error message 297 not accessing disk drives 296 running on battery power 115 setting up 46, 58 warning resume failure message 296 computer lock 92 computing tips 93 Connecting external AV input devices 75 connecting to a power source 49 connection
Index program has performed an illegal operation 294 warning resume failure 296 Error-checking 312 Ethernet LAN port 142 expansion memory slot 59 exploring the desktop 135 ExpressCard inserting 152 removing 153 external monitor not working 311 mouse 78 external diskette drive connecting 80 external display adjusting the picture quality 75 F FAT (File Allocation Table) 312 file extensions 103 file, backing up 94 files backing up 104 printing 104 restoring 105 saving 101 fingerprint authentication 279 enroll
Index bookmarked site not found 300 connecting to 145 features 146 slow connection 300 surfing 146 uploading and downloading files 147 URL address not found 300 using 144 Internet Explorer icon 137 Internet Service Providers 145 IRQ (Interrupt Request) 302 ISPs 145 J jack headphones 70 RJ-11 141 S/PDIF 70 K key assignment viewing existing 267 key assignments changing or removing existing 267 keyboard character keys 95 function keys 96 hot keys 344, 346 not working 296 overlay keys 97 troubleshooting 3
Index overlay keys 97 P password deleting a supervisor 262 disabling a user 260 supervisor set up 261 types 259 user set up 260 passwords instant, using 259 setting 259 PC Card checklist 317 CIS (Card Information Structure) 316 computer stops working 317 configuring 152 errors 318 hot swapping fails 318 inserting 150 not recognized 318 problem solving 316, 317 removing 151 setting up 152 Plug and Play 303 port COM 139 Ethernet LAN 142 RGB 68 S-video In, connecting to 76 power computer will not start 295 co
Index found 300 Internet connection is slow 300 keyboard not responding 296 missing files/trouble accessing a disk 312 modem not receiving or transmitting 320 no sound 315 non-system disk or disk error 297, 314 PC Card 316 checklist 317 error occurs 318 hot swapping fails 318 not recognized 318 slot appears dead 317 power and batteries 307 printer 319 program not responding 293 program not working properly 313 screen does not look right/flickers 310 Startup options 299 system resources 302 URL address
Index Standby mode 83 hot key 341 starting again from 90 start button 137 starting a program 98 Run dialog box 100 Windows Explorer 99 Windows Start menu 99 starting up the computer from Shut down 86 from Standby 90 Startup menu problem solving 299 supervisor password, deleting 262 supervisor password, set up 261 S-video In port S-video In 76 S-video port cable selection 69 system tray 138 T Taskbar 138 telephone line connecting to modem 140 television connecting 69 Toshiba registering computer 48 worldwid