Instructions / Assembly

8.6 No need to Scan QR Code method.
8.6.1 Select your AC type. 8.6.2 Turn off the AC power
and turn on it again.
Waiting for 5 seconds and
then go to the next step.
User ManualPage 15
8.6.4 Go to your phone
wireless network settings,
connect to the network
named "nec_ac_xxxx"and
use default password
12345678.
8.6.3 Press and hold VENT
ANGLE/SWING (on Portable
AC) or WIFI/WIRELESS (on
Window AC) buttons for 3-5
seconds. The unit will enter
Access Point mode and the
display will show "AP". Proceed
to the next step.. On Portable
AC, you can also use the remote
controller by pressing the LED
button 7 times.
User Manual Page 16