Instructions / Assembly

Model: OSK102
Standard:IEEE 802.11b/g/n
Antenna Type:Wxternal omnidirectional Antenna
Frequency:Wireless 2.4G
Maximum Transmitted Power: 15dBm Max
Dimension:55*24*8(mm)
O O O O
Operation Temperature:0 C~45 C/32 F~113 F.
Operation Humidity:10%~85%
Power Input:DC 5V/300mA
We hereby declare that this AC is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
DECLARATION OF CONFORMITY
1
2
3
SPECIFICATION
PRECAUTIONS
1. Operating System: iOS 7+, Android 4+.
2. In the event of a OS update, there may be a delay between
the update of the OS and a related software update during
which your OS may or may not be supported until a new
version is released. Your specific mobile phone or problems
in your network may prevent the system from working and
Toshiba will not be responsible for any problems that could
be caused by incompatibility or network issues.
3. This smart AC only supports WPA-PSK/WPA2-PSK encryption
and or no encription.
WPA-PSK/WPA2-PSK encryption is recommended.
Please check Toshiba Lifestyle website for updated information
in case of doubt.
User ManualPage 1
SYSTEM OVERVIEW
4
Devices required to use the Smart AC:
1 Smart Phone with compatible iOS
or Android system.
2 Smart Air conditioner
3 Wireless Router
4.
5.
6. Due to unstable network connectivity, commands may time out.
If this happens, the smartphone app and the actual product may
display conflicting information. The information displayed on the
actual product is always the most accurate available. Refresh the
app to re-sync.
NOTE:Toshiba will not be responsible for any problems that could
be caused by incompatibility or network issues, your wireless
router and mobile phone.
The smart phone camera must have at least 5 million pixels to
ensure proper scanning of QR code.
Due to unstable network connectivity, request may time out. If this
happens, re-run the network configuration.
User Manual Page 2