Instructions / Assembly

User ManualPage 5

6.3 Click Registration . 6.4 If password is lost,

proceed to password

recovery.

Make sure your smartphone is able to connect to the

wireless network which will be used. Make sure also

that the device is not connecting to other networks

in range.

SET UNIT TO ACCESS POINT MODE

Connect the unit to power supply, press and hold VENT ANGLE

/SWING (on Portable AC) or WIFI/WIRELESS (on Window AC)

buttons for 3-5 seconds. The unit will enter Access Point mode

and the display will show "AP". Proceed to the next step.

NOTE: On Portable AC, you can also use the remote controller

by pressing the LED button 7 times.

NOTE:

When the unit is in "AP" / Access Point mode, the

remote controller is inactive. It is necessary to finish

the network configuration, turn the AC off and on

again or wait for 8 minutes for the unit to leave "AP"

mode automatically.

User Manual Page 6