Use and Care Manual

Page 14 User Manual
window
slider
window
dimension (mm)
window
dimension (inch)
a+b 484
~
592 19.1
~
23.3
b+c 592
~
696 23.3
~
27.4
a+b+c 696
~
802 27.4
~
31.6
b+e 802
~
896 31.6
~
35.3
a+b+e 896
~
998 35.3
~
39.3
a+b+c+d 998
~
1210 39.3
~
47.6
a+b+c+d+e 1210
~
1620 47.6
~
63.8
Installation
Instructions
Window Installation Kit
1: For Hung Window types only
Insert the Air Exhaust Adapter into the exhaust
of the hose (the circular opening) for optimal
performance. Rotate the adapter clockwise until
the locking tabs click and it no longer rotates.
Skip this step if installing into a horizontal
sliding window.
The Air Exhaust adapter may interfere with
some window screens, and can be removed if
desired (Please note this may slightly decrease
performance).
2: Preparing the adjustable window slider
1. Depending on the size of your window,
adjust the size of the window slider. Use the
combination of panels that best  ts your
window opening.
2. If the length of the window requires two or
more window sliders, use the bolt to fasten
the window sliders once they are adjusted to
the proper length.
3. If installing in a sliding window, bolts should be
installed on both sides of the window sliders.
Hung Window Sliding Window
Windows Type
Window
slider A
Window
slider A
Air Exhaust
Adapter
Exhaust
Hose
NOTICE
Once the Exhaust Hose assembly and Adjustable
Window Slider are prepared, choose from one of
the following two installation methods.
3: Applying insulation to the window slider
After assembling the window slider to your proper
dimension, cut and apply the foam insulation
sheets to the exterior side of the window slider.
Window
Slider
Window
Slider
Three Window Sliders
with side holes
Two Window Sliders
without side hole
Use the table below to determine what combination
of Window Sliders is correct for your window
ab
cd
e
ab c d e
boltbolt bolt