Full Product Manual

User Manual Page 5
Power supply cord with 3-prong
grounding plug and current
detection device
Do not, under any
circumstances, cut,
remove or bypass
the grounding prong.
Grounding type wall receptacle
WARNING - For your safety
• Do not store or use gasoline or other
 ammable vapors and liquids in the vicinity
of this or any other appliance.
• Avoid  re hazard or electric shock. Do not use
an extension cord or an adaptor plug. Do not
remove any prong from the power cord.
WARNING - Prevent Accidents
To reduce the risk of  re, electrical shock,
or injury to persons when using your air
conditioner, follow basic precautions, including
the following:
• If the air conditioner is to be installed in a
window, you will probably want to clean
both sides of the glass  rst. If the window
is a triple-track type with a screen panel
included, remove the screen completely
before installation.
• Be sure the air conditioner has been securely
and correctly installed according to the
installation instructions in this manual.
Save this manual for possible future use in
removing or installing this unit.
The complete electrical rating of your new room
air conditioner is stated on the serial plate.
Refer to the rating when checking the electrical
requirements.
• Be sure the air conditioner is properly
grounded. To minimize shock and fire
hazards, proper grounding is important.
The power cord is equipped with a three-
prong grounding plug for protection
against shock hazards.
• Your air conditioner must be used in a
properly grounded wall receptacle. If the
wall receptacle you intend to use is not
adequately grounded or protected by a time
delay fuse or circuit breaker, have a quali ed
electrician install the proper receptacle.
• Ensure the receptacle is accessible after the
unit installation.
• Do not run air conditioner without outside
protective cover in place. This could result
in mechanical damage within the air
conditioner.
• Do not use an extension cord or an adapter
plug.
WARNING - Electrical Information
NOTE
The power supply cord with this air conditioner
contains a current detection device designed to
reduce the risk of  re.
Please refer to the section Operation of Current
Device for details.
In the event that the power supply cord is
damaged, it can not be repaired. It must be
replaced with a cord from the manufacturer.
Safety
Precautions