Full Product Manual

Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
control alone or with the remote.
COOL MODE
The desired cool setting is selected by rotating the knob to the right
to the desired position.
HIGH COOL has maximum cooling e ect and air ow.
LOW COOL has minimum cooling e ect and air ow.
FAN MODE
Rotate the knob to the left to select your choice of fan speeds for air
circulation.
NOTE: When selecting a fan speed, the compressor will not run.
THERMOSTAT
The thermostat is used to set the desired room temperature when
the unit is being operated in the COOL MODE.
To set the desired room temperature, rotate the thermostat switch
to the desired setting. After the set temperature is achieved the
thermostat will automatically start and stop the compressor in
order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher cool settings.
Higher cool settings will provide lower room temperature. Rotate
the thermostat selector counter clockwise for lower cool settings.
Lower cool settings will provide higher room temperature.
Electronic Control Operating Instructions
Operating
Instructions
Air Conditioner Features (RAC-WK05 only)
Air Conditioner Features (Models RAC-WK06 / 08 / 10 / 12 / 15 / 18)
NOTE
The controls featured in this manual are representative of many
available models. Your model may o er slightly di erent features.
MODE
TEMP
MIN
COOL
MAX
COOL
User Manual Page 9