Use and Care Manual

Page 16 User Manual
1. Prepare the Window
2. Prepare Air Conditioner
Installation
Instructions
Lower sash must open su ciently to allow a clear vertical opening (H) of following size (see Table 1).
Side louvers and the rear of the AC must have clear air space to allow enough air ow through the
condenser, for heat removal. The rear of the unit must be outdoors, not inside a building or garage.
Mounting Hardware
3/4” (or 1/2”)
Screws
(7)
Lock Frame
(2)
Sash Lock
(1)
Window sash
seal foam
(1)
Weather
stripping
10*3/4”*1/12”
(5)
A: Remove the air conditioner from the carton and place on a  at surface.
B: Remove top rail and R1 hardware (R1 hardware only for Energy star models) from the packaging
material as shown in Fig. A.
3/8” Screws
(4)
Top Rail
(1)
R1 Hardware
(2)
Top Rail Hardware
Packaging
Fig. A
Top Rail
Top Rail
R1 hardware
(for < 10000 Btu/h
models only)
R1 hardware
(for > 10000 Btu/h
models only)
NOTE
Weather stripping is only for
Energy star models.