Use and Care Manual

Page 26 User Manual
Installation
Instructions
4 Place Cabinet in
1. Open window and mark center of window stool as shown
(Fig. 11).
2. Place cabinet in window with bottom stool angle  rmly seated
over window stool as shown. Bring window down temporarily
behind top angle to hold cabinet in place (Fig. 12).
3. Shift cabinet left or right as needed to line up center of
cabinet on center line marked on stool.
4. Fasten cabinet to window stool with 2 screws into holes (You
may wish to pre-drill pilot holes).
5. Add bottom rail seal over screws to window
stool. (Fig. 13).
Fig. 11
Stool
Stool Angle
Fig. 12
Bottom
Rail Seal
3/4” (or 1/2”) Long
Hex-head Screw
Fig. 13
5 Install Support Bracket
1. Hold each support bracket  ush against outside of sill, and tight
to bottom of cabinet as shown in Fig. 14A. Mark brackets at top
level of sill, and remove.
Mark
Fig. 14A