Use and Care Manual

User Manual Page 37
Function Buttons
Operating
Instructions
(With Remote)
ON/OFF button
MODE button
TEMP UP button
FAN button
SLEEP button
ENERGY SAVER button
TEMP DOWN button
TIMER button
ONE TOUCH button
Operation starts when this
button is pressed and stops
when the button is pressed
again.
Press this button to select
the desired operation mode.
Push this button to increase
the temperature setting.
Used to select the desired
fan speed.
Press this button to activate
the Sleep mode. This
function is available on
COOL, HEAT or AUTO mode
only and maintain the most
comfortable temperature
for you and save enrgy. For
the detail, see “sleep
operation” in “USER’S
MANUAL”.
Press this button to activate
the Energy saving mode.
Press it again to stop the
funtion (on some models).
Push this button to decrease
the indoor temperature
setting.
Push this button to activate
the “Auto Start” or “Auto
Stop” program.
Push this button, the system
will automatically shift
to COOL operation with
auto fan speed, the setting
temperature is 26°C/80°F.
And the timer setting
program will be cancelled
(on some models).
NOTE: If the unit has ENERGY
SAVER function, it will
initiate automatically the
Energy Saver function under
Cool, Dry, and Auto (only
Auto-Cooling and Auto-Fan)
modes.