Use and Care Manual

Page 38 User Manual
Operating
Instructions
(With Remote)
Auto operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select Auto.
3. Press the TEMP UP/DOWN button to set the desired
temperature.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select Cool, Heat (cooling & heating
models only) or Fan mode.
3. Press the TEMP UP/DOWN button to set the desired
temperature.
4. Press the FAN button to select the fan speed.
1
2
3 3
1
2
3 3
4
How to Use the Buttons
NOTES
1. In the Auto mode, the air conditioner can logically choose the
mode of Cooling, Fan, Heating and by sensing the di erence
between the actual ambient room temperature and the set
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed. It has
already been automatically controlled.
3. If the Auto mode is not comfortable for you, the desired mode
can be selected manually.
NOTE
In the Fan mode, the setting temperature is not displayed
in the remote controller and you are not able to control the
room temperature either. In this case, only step 1, 2 and 4 may
be performed.