Use and Care Manual

User Manual Page 39
Operating
Instructions
(With Remote)
Dehumidifying operation
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select Dry.
3. Press the TEMP UP/DOWN button to set the desired
temperature.
1
2
3 3
NOTE
In the Dehumidifying mode, you can not switch the fan speed. It
has already been automatically controlled.
Timer operation
Press the TIMER button can initiate the Auto-start and Auto-stop
setting program of the unit.
To set the Auto-start/stop time.
1. Press the TIMER button, when the TIMER ON indicator displayed
on the LED window of the air conditioner, it indicates the Auto
Start setting program is initiated. When the TIMER OFF indicator
displayed on the LED window of the air conditioner, it indicates
the Auto Stop setting program is initiated.
2. Press or hold the Up (+) or Down (- ) to change the Auto time.
The control will count down the time remaining until start/stop.
3. The selected time will register in 5 seconds and the air
conditioner will automatically revert back to display the
previous temperature setting.
4. Turning the unit ON or OFF at any time will cancel the Auto
Start/stop function.
NOTE
To cancel the TIMER setting, push the TIMER button and press or
hold the Up (+) or Down ( - ) until 0 hour is displayed on the LCD
window of the air conditioner.
2 2
1