Full Product Manual

User Manual Page 17
C. Align the hole in the top rail
with those in the top of the
unit as shown in Fig. E.
D. Secure the top rail to the
unit with the 3/8” Screws as
shown in Fig. F.
A. Place unit on the oor, a bench or a table. Hold the Accordion
Panel in one hand and gently pull back the center to free the
open end. See Fig. 1.
RAC-WK05/06 Models RAC-WK08 Model
set to provide the proper pitch to the rear of the
unit (5/16”). This is necessary for proper condensate management and drainage. If you are not using
the Side Panels for any reason, this pitch to the rear must be maintained.
Fig.B
Fig.C
Installation
Instructions
For safety reasons, all four
(4) screws MUST be securely
fastened.
CAUTION
NOTICE