Use and Care Manual

User Manual Page 23
Installation
Instructions
4 Place Cabinet in Window Opening
1. Open window and mark center of window sill as shown (Fig. 11).
2. Place cabinet in window with bottom sill angle  rmly seated
over window sill as shown. Bring window down temporarily
behind top rail to hold cabinet in place (Fig. 12).
3. Shift cabinet left or right as needed to line up center of
cabinet on center line marked on sill.
4. Fasten cabinet to window sill with 2 screws into holes (You
may wish to pre-drill pilot holes).
5. Add bottom rail seal over screws to window
sill. (Fig. 13).
Fig. 11
Sill
Sill Angle
Fig. 12
Bottom
Rail Seal
3/4” (or 1/2”) Long
Hex-head Screw
Fig. 13
5 Install Support Bracket
1. Hold each support bracket  ush against outside of sill, and tight
to bottom of cabinet as shown in Fig. 14A. Mark brackets at top
level of sill, and remove.
Mark
Fig. 14A