Full Product Manual

User Manual Page 25
Installation
Instructions
3/4” (or 1/2” )
long Hex-head
screw
Fig. 17A
4. Attach the top rail to window frame: Use
a 3/32” drill bit to drill one hole through
the hole in the middle the top rail into the
window frame, and drive one 3/4” (or 1/2”)
HEX-HEAD locking screw through hole in the
middle the top rail into the window frame as
shown (Fig. 17A).
Fig. 18
A. 3/4” (or 1/2”) Long Hex Head Screw
B. Left-Hand Window Filler Panel Top Leg
C. Window Channel
Window Channel
A
B
C
Weather seals
A. 3/4” (or 1/2”) long hex head screw
A
Fig. 18A
7 Attach Window Filler Panels to Window Frame
1. Extend the window  ller panels out against the
window frame.
2. Use a 1/8” drill bit to drill a starter hole
through the hole in the top leg of each
window filler panel and into the window
sash (Fig. 18 and Fig. 18A). Connect with one
3/4” (or 1/2”) long hex head screw.
Window Sash
Seal
Fig. 19
8 Install Window Sash Seal and
Safety Lock
1. Trim sash seal to fit window
width. Insert into space between
upper and lower sashes (Fig. 19).
2. Attach right angle safety lock
(Fig. 19A).
Safety Lock
3/4” (or 1/2” )
Long
Hex-head
Screws
Fig. 19A