Use and Care Manual

User Manual Page 21
Installation
Instructions
A. Window Mounting
1 Remove Chassis
1. Pull down front grille and remove  lter. (See Fig. 1).
2. Lift front grille upwards and place to one side.
3. Locate the four front screws and remove. These screws will be
needed to re-install the front panel (see Fig. 2).
4. Push metal cabinet side to release plastic tabs on each side of
front panel (see Fig. 3).
5. Gently lift front panel o unit (see Fig. 3A).
6. Disconnect the connector plug of the display panel from the
unit and place front panel to one side (see Fig. 4).
7. Remove shipping screws from top of unit and also on the
side by the base if installed (see Fig. 5).
8. Hold the cabinet while pulling on the base pan handle, and
carefully remove the unit.
Fig. 2
Fig. 3
Fig. 4
Fig. 3A
Front Panel
Front Grille
Fig. 1
Shipping
Screws
Fig. 5