Use and Care Manual

Page 16 User Manual

window

frame

Fig. 5

Fig. 6

Fig.6

Fig. 7

Fig. 8

Fig. 9

FOAM SEAL

Fig. 10

A. Place the frame lock between the frame extensions and the

window sill as shown (Fig. 7).

Drive 3/4” (19 mm) or 1/2” (12.7 mm) locking screws through

the frame lock and into the sill.

B. Drive 3/4” (19 mm) or 1/2”

(12.7 mm) locking screws

through frame holes into

window sash (Fig. 8).

C. To secure lower sash in place, attach right angle sash lock with

3/4” (19 mm) or 1/2” (12.7 mm) screw as shown (Fig. 9).

D. Cut Window sash seal foam and insert it in the space between

the upper and lower sashes (Fig. 10).

B. Extend the side panels out against the window frame (Fig. 6).

5. Install Support Bracket

NOTE

To prevent window sill from splitting, drill 1/8” (3 mm) pilot holes

before driving screws.

Fig.8

Fig. 8

Fig.8

Fig. 8

Installation

Instructions

RAC-WK05 only

Models RAC-WK06/08/10/12/15/18