Owner's Manual

14
Index to Parts and Controls (Continued)
Introduction
Rear panel
1
43
2 6 75
8 9
5 INPUT1/INPUT3 jacks page 44
Use this to connect the recorder to output jacks of
external devices such as another player or
camcorder.
6 VHF/UHF RF IN (FROM ANT.) input socket
page 20 in “INSTALLATION GUIDE”
Connects to an antenna or cable signal.
7 VHF/UHF RF OUT (TO TV) output socket
page 20 in “INSTALLATION GUIDE”
Connects the supplied coaxial cable to a TV.
8 G-LINK jack
page 25 in “INSTALLATION
GUIDE”
Connect the supplied G-LINK cable to this jack if
you are connecting this recorder to a cable set top
box. While the recorder is turned off, the TV Guide
On Screen system changes channels on your
cable box via the G-LINK cable to download free
program listings for your area. You are also able to
control your cable set top box using the recorder’s
remote control after you connect the G-LINK cable
and go through the TV Guide On Screen setup.
1 Power cord
page 21 in “INSTALLATION
GUIDE”
2 Ventilation fan
3 DIGITAL AUDIO OUT BITSTREAM/PCM
OPTICAL jack
page 27 in “INSTALLATION
GUIDE”
Use this to connect the recorder to an audio
receiver equipped with an optical digital audio
input jack.
4 COMPONENT OUTPUT jacks
page 26 in
“INSTALLATION GUIDE”
Outputs video signals to a connected TV or
monitor.
Connects to a TV or monitor equipped with
component video jacks.