40XF550U_EN.book Page 1 Monday, March 17, 2008 2:07 PM Integrated High Definition LCD Television HIGH-DEFINITION TELEVISION 40XF550U 46XF550U 52XF550U For an overview of steps for setting up your new TV, see page 9. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program).
40XF550U_EN.book Page 2 Monday, March 17, 2008 2:07 PM Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN.
40XF550U_EN.book Page 3 Monday, March 17, 2008 2:07 PM Important Safety Instructions 15) CAUTION: • To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure. • To prevent electric shock, match wide blade of plug to wide slot; fully insert. 1) Read these instructions. 2) 3) 4) Keep these instructions. Heed all warnings. Follow all instructions.
0XF550U_EN.book Page 4 Monday, March 17, 2008 2:07 PM 23) Always place the back of the television at least four (4) inches away from any vertical surface (such as a wall) to allow proper ventilation. 24) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse. 25) Never overload wall outlets and extension cords. 26) Always operate this equipment from a 120 VAC, 60 Hz power source only.
40XF550U_EN.book Page 5 Monday, March 17, 2008 2:07 PM Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand: Observe the following safety precautions: 1) Read and Follow the pedestal assembly instructions included with the pedestal. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket.
40XF550U_EN.book Page 6 Monday, March 17, 2008 2:07 PM FCC Declaration of Conformity Compliance Statement (Part 15): The Toshiba 40XF550U, 46XF550U, and 52XF550U Televisions comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
40XF550U_EN.book Page 7 Monday, March 17, 2008 2:07 PM Contents Important Safety Instructions .......................................... 3 Installation, Care, and Service ........................................ 3 Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Overview of steps for installing, setting up, and using your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40XF550U_EN.book Page 8 Monday, March 17, 2008 2:07 PM Chapter 7: Using the TV’s advanced features . . . . . . . . . . . . .61 Using the advanced picture settings features . . . . . . . . . . . . 61 Using dynamic contrast . . . . . . . . . . . . . . . . . . . . . . . . . 61 Using the static gamma feature . . . . . . . . . . . . . . . . . . . 61 Selecting the color temperature . . . . . . . . . . . . . . . . . . . 61 Selecting the cinema mode (480i and 1080i signals). . . 62 Using the ClearFrame™ feature .
40XF550U_EN.book Page 9 Monday, March 17, 2008 2:07 PM Chapter 1: Introduction Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: • Super Narrow Bezel and Blue LED Illumination. • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution.
40XF550U_EN.book Page 10 Monday, March 17, 2008 2:07 PM Chapter 1: Introduction TV front and side panel controls and connections Model 40XF550U is used in this manual for illustration purposes. Right side panel TV front 5 9 6 10 7 11 8 Control panel 4 1 2 3 1 Illumination — Power indicator This slit will be illuminated by the blue LED back light. See “Selecting the Blue LED Illumination level” on page 40 for additional information.
40XF550U_EN.book Page 11 Monday, March 17, 2008 2:07 PM Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see pages 12–19. 1 TV back Power cord Cable Clamper 2 3 4 5 6 1 2 IR OUT — For controlling infrared remote-controlled devices through the TV. You can connect up to two devices with an optical IR blaster cable (- page 12), and then control the devices using the TV’s IR pass-through features.
40XF550U_EN.book Page 12 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Overview of cable types Cables can be purchased from most stores that sell audio/video devices. Before purchasing any cables, be sure of connector types required by your devices and the length of each cable. Coaxial (F-type) cable Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/ CABLE input on your TV.
40XF550U_EN.
40XF550U_EN.book Page 14 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver Your TV has two sets of ColorStream® (component video) inputs.
40XF550U_EN.book Page 15 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Connecting a device to the IR OUT infrared terminal using the IR blaster cable for IR pass-through device control You can use the TV’s IR OUT terminal (infrared passthrough) to remotely operate (through the TV) many infrared remote-controlled devices (such as Toshiba infrared remotecontrolled VCRs or DVD players) enclosed within an entertainment center or similar cabinet.
40XF550U_EN.book Page 16 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Connecting an HDMI™ or DVI device to the HDMI input * To select the video input source, press INPUT on the remote control (- page 21). To program the TV remote control to operate other devices, see Chapter 3.
40XF550U_EN.book Page 17 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV REGZA-LINK connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see pages 57 and 58. TV lower back panel Playback device (REGZA-LINK HD DVD player,etc.
40XF550U_EN.book Page 18 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital g or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need: • optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “minioptical” connector.
40XF550U_EN.book Page 19 Monday, March 17, 2008 2:07 PM Chapter 2: Connecting your TV Connecting a personal computer (PC) With either the PC IN or HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.
40XF550U_EN.book Page 20 Monday, March 17, 2008 2:07 PM Chapter 3: Using the remote control Preparing the remote control for use Installing the remote control batteries Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. 1 Slide the battery cover off the back of the remote control. 2 Install two “AA” size alkaline batteries.
40XF550U_EN.book Page 21 Monday, March 17, 2008 2:07 PM Chapter 3: Using the remote control Learning about the remote control The buttons used for operating the TV only are described here. For the REGZA-LINK remote control functions, see the section “Using REGZA-LINK” (- page 57). For a complete list of the remote control’s functions, see the remote control functional key chart (- pages 22–23).
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.book Page 24 Monday, March 17, 2008 2:07 PM Chapter 3: Using the remote control Using the remote control to operate your other devices Your TV remote control has one dedicated TV mode and four programmable multi-brand modes: CABLE/SAT, HD DVD, DVD, and VCR/PVR. The default device modes and programmable device modes are listed below. Note: The TV remote control is preprogrammed to operate most Toshiba devices.
40XF550U_EN.book Page 25 Monday, March 17, 2008 2:07 PM Chapter 3: Using the remote control Searching and sampling the code of a device (8500) If you do not know the device code for a particular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be sampled, provided they are applicable to that mode, are p, 1, z, <, and S.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.
40XF550U_EN.book Page 33 Monday, March 17, 2008 2:07 PM Chapter 4: Menu layout and navigation Main menu layout Setup/Installation menu layout To open the main menus (illustrated below), press Y on the remote control or TV control panel. To open the Installation menu (illustrated below), press Y on the remote control or TV control panel, open the Setup menu, select Installation, and press T.
40XF550U_EN.book Page 34 Monday, March 17, 2008 2:07 PM Chapter 4: Menu layout and navigation Navigating the menu system You can use the buttons on the remote control or TV control panel to access and navigate your TV’s on-screen menu system. • Press Y to open the menu system.
40XF550U_EN.book Page 35 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV Setting the Demo Mode Selecting the menu language When you first turn on the TV, menu language selection and Demo Mode selection windows will appear by default. You can choose from three different languages (English, French and Spanish) for the on-screen display of menus and messages. To select settings: 1 To select the menu language: From the menu language selection window, select your preferred language.
40XF550U_EN.book Page 36 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV Configuring the input source for the ANT/CABLE terminal To configure the ANT/CABLE input source: 1 2 Press Y and open the Setup menu. Highlight Installation and press T. Programming channels into the TV’s channel memory When you press < or , on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory.
40XF550U_EN.book Page 37 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV 3 Open the Terrestrial menu, highlight Channel Program to bring up the Start, and press T again to begin channel programming. To revert to your original settings: Highlight Cancel and press T before saving. To remove all channels from the channel memory: ANT/CABLE Cable Scanning channels, please wait ...
40XF550U_EN.book Page 38 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV 2 Press B or b to highlight Enable Auto Input and then press C or c to select On. Auto Input Use this menu to enable your TV's automatic input switching feature when changing modes on your remote control. Enable Auto Input POWER SLEEP TV TV CABLE/SAT DVD -- CABLE/SAT MODE SELECT HD DVD On VCR/PVR Press BbC c to highlight No Label and press T. Repeat steps 2 and 3 for other channels.
40XF550U_EN.book Page 39 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV Setting the HDMI™ audio mode Viewing the digital signal meter To set the HDMI audio mode: You can view the digital signal meter in the ANT/CABLE digital TV input source only. 1 From the Audio menu, highlight Audio Setup and press T. To view the digital signal meter: 2 Press B or b to select HDMI 1 Audio and then press C or c to select the HDMI 1 audio mode (Auto, Digital, or Analog).
XF550U_EN.book Page 40 Monday, March 17, 2008 2:07 PM Chapter 5: Setting up your TV Viewing the system status Selecting the Blue LED Illumination level To view the system status: 1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear. 2 Open the System Status menu, highlight System Information, and press T. 3 Press C c to scroll through the menu bar to select the Software Version and view the related information.
40XF550U_EN.book Page 41 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Selecting the video input source to view To select the video input source to view: 1 2 Note: • When selecting REGZA-LINK input sources from the popup window using +, some REGZA-LINK devices may automatically turn on. • When selecting input sources using B b, you will have to press T to actually select a particular device from the popup window. Press + on the remote control or TV control panel.
40XF550U_EN.book Page 42 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features 4 Press C or c to select the desired label for that input source. If a particular input is not used, you can select Hide as the label, which will cause that input to be “grayed out” in the Input Selection screen and skipped over when you press + on the remote control. 5 To save the new input labels, highlight Done and press T. To revert to the factory default labels, highlight Reset and press T.
40XF550U_EN.book Page 43 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features To set up the Channel Browser™: 1 From the Preferences menu, highlight Channel Browser Setup and press T. 2 Press B to highlight Navigation, and then press C or c to select either Browse Mode or Select Mode.
40XF550U_EN.book Page 44 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Adding and clearing channels and inputs in the History List To set the Channel Tuning Mode: 1 From the Setup menu, highlight Installation and press T. A new set of Installation menu icons will appear. As a channel or input is tuned, the Channel Browser™ adds it to the History List and displays it on the “right side” of the Channel Browser™.
40XF550U_EN.book Page 45 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 2 Select the first channel you want to view. 3 Press R on the remote control. The previous channel will display. Each time you press R, the TV will switch back and forth between the last two channels that were tuned.
40XF550U_EN.book Page 46 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Picture Size Natural Picture Size 4:3 HD (for 720p, 1080i, and 1080p program sources only) Some program formats will display with sidebars and/or bars at the top and bottom. Picture is not distorted from original size.
40XF550U_EN.book Page 47 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1 2 Press Y and open the Video menu. Highlight Theater Settings and press T. Video Mode Sports Picture Settings Noise Reduction ColorMaster x.v.
40XF550U_EN.book Page 48 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Using the FREEZE feature To use the FREEZE feature: 1 When viewing the TV, press B to make the picture a still picture. 2 To return to the moving picture, press B again (or any other button). Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture.
40XF550U_EN.book Page 49 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Using the TheaterLock™ feature The TheaterLock™ feature allows you to “lock” all items that affect the picture mode setting. In other words, those settings that when adjusted cause the Mode setting to automatically change to “Preference” will be grayed out and unavailable when the TheaterLock setting is set to “On”. Items that do not influence Mode status will not be affected e.g., Noise Reduction, x.v.
40XF550U_EN.book Page 50 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Digital CC Settings To select closed captions: You can customize the closed caption display characteristics by changing the background color, opacity, text size, type, edge, and color. 1 From the Preferences menu, highlight CC Selector and press T. 2 Press B or b to select Closed Caption, and then press C or c to select the desired service. 3 Press O.
40XF550U_EN.book Page 51 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Using the digital audio selector You can use the Digital Audio Selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup (- “Selecting stereo/SAP broadcasts” on page 51).
40XF550U_EN.book Page 52 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Using the StableSound® feature The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound® feature: 1 From the Audio menu, highlight Audio Settings and press T. 2 3 In the StableSound field, select On.
40XF550U_EN.book Page 53 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features 2 Press b, which displays the PIN code entry screen. • The Lock System screen (below) appears if a PIN code has not been stored. Press the Channel Number buttons to enter a new four-digit code, enter the code a second time to confirm, and press T. Lock System Please enter a 4 digit PIN code Confirm PIN code Cancel Done • The Locks/Active screen appears if the PIN code is already stored.
40XF550U_EN.book Page 54 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Downloading an additional rating system for blocking TV programs and movies In the future, an additional rating system may become available for use in selectively blocking programs. Independent rating system for broadcasters Ratings Description and Content themes TV-MA Note: The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded.
40XF550U_EN.book Page 55 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Blocking channels Using the input lock feature With the Channels Block feature, you can block specific channels. You will not be able to tune blocked channels unless you unlock them. To block channels: You can use the Input Lock feature to lock the video inputs (Video 1, Video 2, ColorStream HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, and PC) and channels 3 and 4.
40XF550U_EN.book Page 56 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features To deactivate the Input Lock once the GameTimer has activated it: Set the Input Lock to Off (- “Using the input lock feature” as described above). Note: • A message will appear when 10 minutes, 3 minutes, and 1 minute remain on the GameTimer.
40XF550U_EN.book Page 57 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Setting the PC Audio Using REGZA-LINK This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection (- page 17).
40XF550U_EN.book Page 58 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features REGZA-LINK Player Control menu functions: 1 2 3 Press C and open the THINC Applications menu. Highlight REGZA-LINK Player Control and press T. Press B or b to select the item you want to control and press T. Item Description Power Turns the select device on and off. Top Menu Accesses the top menu of a DVD. Menu Accesses the menu of a DVD. Contents Menu Accesses the contents list when you press T.
40XF550U_EN.book Page 59 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features To set the REGZA-LINK Setup: 1 2 3 From the Setup menu, highlight REGZA-LINK Setup and press T. Press B or b to highlight Enable REGZA-LINK. Press C or c to select On. Note: if you set Enable REGZA-LINK to Off, the other items will be grayed out. 4 5 Press B or b to highlight the REGZA-LINK setup item you want to use, and press C or c to select On or desired mode.
40XF550U_EN.book Page 60 Monday, March 17, 2008 2:07 PM Chapter 6: Using the TV’s features Displaying TV status information Understanding the auto power off feature To display TV status information using RECALL: Press E on the remote control. The following information will display (if applicable): • Current input (ANT/CABLE, Video 1, etc.) • If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts).
40XF550U_EN.book Page 61 Monday, March 17, 2008 2:07 PM Chapter 7: Using the TV’s advanced features Using the advanced picture settings features 4 Note: If you select one of the factory-set picture modes (Sports, Standard, Movie or PC) and then change the static gamma setting, the picture mode automatically changes to Preference.
40XF550U_EN.book Page 62 Monday, March 17, 2008 2:07 PM Chapter 7: Using the TV’s advanced features Selecting the cinema mode (480i and 1080i signals) When you view a DVD (3:2 pulldown processed) from a DVD player connected to the Video 1, Video 2, ColorStream HD1, ColorStream HD2 (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film. To set the Cinema Mode to Film: 1 From the Video menu, highlight Picture Settings and press T.
40XF550U_EN.book Page 63 Monday, March 17, 2008 2:07 PM Chapter 7: Using the TV’s advanced features Using MPEG noise reduction To adjust the Base Colors: The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”). 1 From the ColorMaster menu, highlight Color Palette Adjustment and press T.
40XF550U_EN.book Page 64 Monday, March 17, 2008 2:07 PM Chapter 7: Using the TV’s advanced features Using x.v.Color Selection feature The color range “x.v.Color” is an international standard and enables a wider color range than conventional video applications. When set to Auto, picture settings are automatically set when an x.v.Color signal is detected. When set to On, x.v.Color detection does not occur, so picture settings are always adjusted for x.v.Color. When set to Off, normal processing occurs.
40XF550U_EN.book Page 65 Monday, March 17, 2008 2:07 PM Chapter 8: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try. Black box on-screen • The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off (- page 49). Poor color or no color • The station may have broadcast difficulties. Try another channel.
40XF550U_EN.book Page 66 Monday, March 17, 2008 2:07 PM Chapter 8: Troubleshooting Remote control problems • Make sure the remote control is set to the correct device mode (- page 21). • Remove all obstructions between the remote control and the TV. • The remote control batteries may be dead. Replace the batteries (- page 20). • Your TV remote control may not operate certain features on your external device. Refer to the owner’s manual for your other device to determine its available features.
40XF550U_EN.book Page 67 Monday, March 17, 2008 2:07 PM Chapter 8: Troubleshooting • Green blinks quickly Power protect detection. Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV. • Green blinks slowly Yellow blinks slowly Charis calibration error. Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn ON the TV. If, after trying the solutions, the problem still exists: • In the U.S., call TACP Consumer Solutions at 1-800-5755469.
40XF550U_EN.book Page 68 Monday, March 17, 2008 2:07 PM Chapter 9: Appendix Specifications Note: • This model complies with the specifications listed below. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future.
40XF550U_EN.book Page 69 Monday, March 17, 2008 2:07 PM Chapter 9: Appendix Acceptable signal formats for PC IN and HDMI terminals PC IN signal formats Note: Depending on the connected PC, the following status may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV. Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz 72.809Hz 37.861kHz 31.500MHz 75.
40XF550U_EN.book Page 70 Monday, March 17, 2008 2:07 PM Chapter 9: Appendix Limited United States Warranty for LCD Televisions 26” and Larger Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.
40XF550U_EN.book Page 71 Monday, March 17, 2008 2:07 PM Chapter 9: Appendix Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND FLAT PANEL TELEVISION (the “TELEVISION(S)” or “Television(s)”) AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
40XF550U_EN.book Page 72 Monday, March 17, 2008 2:07 PM Chapter 9: Appendix Disclaimer and Limitation of Remedy TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION, INCLUDING THE IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED.
40XF550U_EN.book Page 73 Monday, March 17, 2008 2:07 PM Index A G R Antenna input configuration ............ 36 Audio quality adjustments ............... 51 Audio system connection ................ 18 Auto aspect .................................... 47 Auto Input ...................................... 37 Auto power off ................................ 60 Game Mode feature ........................ 64 GameTimer® .................................. 55 RECALL button ...............................
40XF550U_EN.book Page 74 Monday, March 17, 2008 2:07 PM Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.