RL93* Digital Series RL95* Digital Series Register your TV online at www.toshiba.co.
English Contents Dual .............................................................................................26 Balance ......................................................................................26 Bass, Treble ..............................................................................26 Voice Enhancement ..............................................................26 Dynamic Bass Boost ..............................................................26 Stable Sound® ....................
TEXT SERVICES Text services ......................................................................................70 Selecting modes ....................................................................70 Text information ....................................................................70 Navigating pages using Auto ............................................70 Navigating pages using LIST .............................................70 Control buttons .....................................................
English INSTALLING YOUR TV DO be careful with glass panels or doors on equipment. Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for Fixing strap comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the “Country” section of the “System Seup” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
INSTALLING YOUR TV 16 To access the “TOSHIBA PLACES” Top Page When network is not connected, an error message will be displayed. Simple at-a-glance reference of your remote control.
English INSTALLING YOUR TV The remote control (CT-90420) 15 To mute the TV sound 16 To access Quick Menu Simple at-a-glance reference of your remote control. 2 3 6 7 17 On-screen Menus 1 4 5 8 18 To display the digital on-screen Programme Guide 19 When using menus, the arrows move the cursor on the screen up, down, left or right.
CONNECTING YOUR TV English Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. ILLUSTRATION SHOWS 40RL933. HDMI 3 INPUT HEADPHONE jack Power cord LAN port SCART (EXT 1) HDMI 1/2 INPUTS COMPONENT VIDEO/AUDIO INPUT VIDEO/AUDIO INPUT (Y/L/R) (EXT 2) RGB/PC INPUT DIGITAL AUDIO OUTPUT (OPTICAL) Aerial Cable Media Recorder Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . .
English CONNECTING YOUR TV Connecting an HDMI® device The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 78.
CONNECTING YOUR TV English REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 68–69. the back of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables.
English CONNECTING YOUR TV Connecting a computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adaptor cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector).
CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 34.
English CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 40RL933. COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
CONNECTING YOUR TV English MENU structure To open the main menu (illustration below) , press MENU on the remote control. Guide Genre Search Setup TV Programmes 1st Layer Library Media Player Connected TV Function Press MENU. Programme Timers 2nd Layer Press C c / B. Press C c. 3rd Layer Press OK. Press BbC c.
English SETTING UP YOUR TV h Startup Application Before switching on the TV, make sure your decoder/media recorder, if applicable, is in standby. To set up the television, use the buttons on the remote control as detailed on page 7. Press OK, and the Network Type screen will appear. Press C or c to select Wired or Wireless. Network Type Please select a network type. Quick Setup Wired a Press the 1 button. The Menu Language screen will appear.
SETTING UP YOUR TV l In step 9, when you select Manual Setup; Press OK, and the Manual Setup screen will appear. Press B or b to select Network Name and press OK. The Software Keyboard window will appear (page 38). Input the Network Name by using the Software Keyboard. To save your setting, press the BLUE button. When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.
English SETTING UP YOUR TV n Press OK. If your country supports Network Guide, The Guide Type screen will appear. Guide Type r Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists. s Use B or b to move through the list to select a channel, and then press OK to view. Please select Guide Type. In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.
SETTING UP YOUR TV c System Setup Menu Language English Country Germany Ant/Cable In Auto Tuning ATV Manual Tuning DTV Manual Tuning Operator Selection: DTV Settings You can choose the Cable operator depending on the Country you set. Quick Setup d DTV Scan Type: Press B or b to select Auto Tuning and press OK. This item determines whether a Quick Scan or a Full Scan will be executed. The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.
English SETTING UP YOUR TV a ATV Manual Tuning Tuning In the System Setup menu, press b to select ATV Manual Tuning and press OK. System Setup The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System. Menu Language Use C and c to move across the screen and select any of the ATV Manual Tuning options.
SETTING UP YOUR TV h Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR. Skip To prevent certain channels from being viewed, positions can be skipped. a b ATV Manual Tuning Station 1 I A C 2 0 V C R i Press OK to save. j Repeat for each position you want to tune.
English SETTING UP YOUR TV DTV Manual Tuning Sorting positions Channels may be moved and saved to the position of your choice. a b NOTE: This feature varies depending on the Ant/Cable In setting. Select ATV Manual Tuning from the System Setup menu. Manual Tuning With the list of channels showing, use B or b to highlight the channel you want to move and press c. ATV Manual Tuning Pos.
SETTING UP YOUR TV DTV Settings When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows: Channels Frequency – input a specific frequency to be scanned Modulation – choose from one of five QAM modulation options Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan English Manual Tuning for DVB-C The channel order may be changed to suit your personal preference. a b Select DTV Settings from the System Setup menu and press OK. Select Channels and press OK.
English SETTING UP YOUR TV Move — Press the GREEN button to activate the Move feature. Press the B or b buttons to select the Analogue switch-off channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the B or b buttons to place the focus at the position to which you wish to move the channels.
CONTROLS AND FEATURES Selecting channels To select a channel, use the numbered buttons on the remote control. Quick Menu Channels can also be selected using PU and Pu. Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel. Press QUICK to display the Quick Menu and use B or b to select the option.
English CONTROLS AND FEATURES Sound controls Voice Enhancement Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. Voice Enhancement emphasises the frequency range of the speaker’s voice, making it easier to catch what they are saying. a In the Advanced Sound Settings menu, press B or b to select Voice Enhancement. b Press C or c to select On or Off.
CONTROLS AND FEATURES English Audio Level Offset Headphone Settings Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. a b Speaker Link Headphone On Sound is output (2 ± is available.) Off Sound is output (Headphone level menu is available.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
CONTROLS AND FEATURES English NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
English CONTROLS AND FEATURES Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
CONTROLS AND FEATURES Auto Brightness Sensor When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B or b to select Base Colour Adjustment and press OK. b Press B or b to select an option and press c to move to the adjustment window. a In the Advanced Picture Settings menu, press B or b to select Auto Brightness Sensor. b Press C or c to select On or Off.
English CONTROLS AND FEATURES DNR – Digital Noise Reduction 4:3 Stretch DNR allows you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. When 4:3 Stretch is activated, the size switching system changes 4:3 programmes into full screen picture. a b Select DNR from the Noise Reduction menu. Press C or c to select Low, Middle, High, Auto or Off.
CONTROLS AND FEATURES Wireless LAN and your Health This TV is a DLNA CERTIFIED™ Player. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. If you want to use this TV as a DLNA CERTIFIED™ Player, you will have to configure the network on your TV (see page 13). If you want to use your home network, you will have to configure the network on your TV. (see page 13) Change the network settings if necessary (see “Setting up the Network” on page 34).
English CONTROLS AND FEATURES Setting up the Network You can select the Network Type. Manual setup Network name, Authentication, Encryption and Security Key all to be inputted manually. a Press MENU / C c to highlight Setup icon. Assisted Setup b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Network Setup and press OK. a In the Preferences menu, press B or b to select Network Setup and press OK.
CONTROLS AND FEATURES f g h i j Press B or b to select Network Name and press OK. The Software Keyboard window will appear. Input the Network Name by using the Software Keyboard (see page 38). To save your setting, press the BLUE button. Wireless Information The settings configured in Wireless Setup can be confirmed. a b Press B or b to select Authentication and press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. Press B or b to select Wireless Information and press OK.
English CONTROLS AND FEATURES NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on page 34). d Highlight Auto Setup and press C or c to select On. IP Address Setup Auto Setup On Notes on wireless LAN environment: IP Address xxx . xxx . xxx . xxx • The function of all IEEE802.11 is not supported. • The ad-hoc mode is not supported.
CONTROLS AND FEATURES NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup: You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK.
English CONTROLS AND FEATURES Using the software keyboard Network Device Setup You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. External Control Setup To enter text using the software keyboard: a b c This setup allows you to operate a home network-connected your TV from an external device. Highlight the desired character on the on-screen software keyboard. Media Controller Setup Press OK.
CONTROLS AND FEATURES English Device Name Setup The TV’s device name can be changed. a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to highlight Device Name Setup and press OK. c d Highlight the Device Name field and press OK. The Software Keyboard window will appear. Input the Device Name by using the software keyboard (see page 38). Press the BLUE button. NOTE: The Device Name can be up to 15 characters long.
English CONTROLS AND FEATURES USB HDD Record Function This function can be used to record and play digital broadcast programmes. Read the precautions below before recording or viewing programmes using the USB HDD record function. NOTE: • In order to use this function a USB HDD needs to be connected to the TV. • Recorded programmes saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device.
CONTROLS AND FEATURES Programmed recording can be scheduled easily using the Programme Guide or by specifying the date and time. To search for and record a programme using Genre Search a PLEASE NOTE: Genre Search When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. Other channels will not be available during the timed programme unless the programme timer is cancelled.
English CONTROLS AND FEATURES To programme the timer a b To schedule a programme using the information screen Press MENU / C c / B / C c to highlight TV Programmes / Programme Timers icons and press OK. a Select the unprogrammed column (blank column) and press OK. The Edit Timer menu will appear. Press , the information screen will appear giving details of the channel and programme currently being viewed.
CONTROLS AND FEATURES b Press B or b to select the title you want to view. A preview of the content selected can be seen on the preview screen. To check a schedule a Press B or b on the Programme Timers screen to check the schedule. To change the order in which the titles are listed, press the BLUE button. c Press OK. Viewing starts. ● icon appears next to the title currently being recorded.
English CONTROLS AND FEATURES To protect or unprotect a recorded programme USB HDD capacity Protecting a programme prevents it from being accidentally deleted. You can check the remaining capacity of the USB HDD using Remaining Capacity. Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected.
CONTROLS AND FEATURES To set the padding time for programmed recording start time and end time Press B or b to select One Touch Recording Time. Recording Setup Select Device One Touch Recording Time TimeShift Size a In the Recording Setup screen, press B or b to select Start Padding Time. b Press C or c to select a time. Programme End Time 512 MB Start Padding Time None End Padding Time None You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes.
English CONTROLS AND FEATURES To format a USB HDD a In the Recording Setup screen, press B or b to select Format Device and press OK. b Press C or c to select Yes in the confirmation window that will appear and press OK. Formatting will start. Wait until formatting ends. NOTE: • If the USB HDD is separated several partitions by PC and multiple Partition appear on the Device List screen, press B or b to select the Partition you want to format.
CONTROLS AND FEATURES A new cloud based service, where content (movies, photos, etc.) can be viewed and shared across the web through a simple user interface called “Toshiba Places”. NOTE: You need to configure a home network before using this feature (see page 13). a Press on the remote control, or press MENU / C c to highlight Connected TV icon and press B / C c to highlight Toshiba Places icon and press OK. b Press BbC c to select the desired place and press OK.
English CONTROLS AND FEATURES Using Intel® Wireless Display To exit Intel® Wireless Display Exit Intel® Wireless Display by pushing the disconnect button on Intel® WiDi software or by pressing EXIT on the TV remote control. Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for Intel® Wireless Display ready computers. NOTE: If the PC has been inactive for some time, the Intel® WiDi connection will be disconnected automatically.
CONTROLS AND FEATURES This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port. Moreover, you can also play photos, movies or music files from your PC by connecting the TV to your home network. Terminology: c Press B or b to select Media Player setup and press OK. d Press B or b to select USB Auto Start and press C or c to select On or Off. Auto Start: a DMP: DLNA CERTIFIED™ Player Insert USB device into the USB socket on the left side of the TV.
English CONTROLS AND FEATURES Using the Media Player with a DLNA CERTIFIED™ Server Viewing photo files (on a DLNA CERTIFIED™ Server or USB device) You need to configure a home network before using this feature (see page 13). There are three types of viewing modes. a Press MENU / C c to highlight Media Player icon. b Press B / C c to highlight Network Media Player and press OK. Multi View (USB Photo) This view allows you to search for photos in a grid format.
CONTROLS AND FEATURES To zoom in/out photos In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. During the Single View mode or Slide Show mode, the zoom function can be used. a Press c to view the next photo. Press C to view the previous photo. b Press B to rotate the image 90° clockwise.
English CONTROLS AND FEATURES To select a photo from Play List Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) While in the Single View mode or Slide Show mode, you can select a different photo from the Play List. a b Press QUICK to open the Quick Menu from Single View mode or Slide Show mode. You can select movies from a Multi View of available files. Multi View (USB Movie) Press B or b to select Play List and press OK. 5/9999 ///Folder name The Photo List will appear.
CONTROLS AND FEATURES Resume Play (USB only) • Press W/w to pause. PAUSE may not be available depending on the contents or DMS. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change. • To locate a specific file, press Z or z repeatedly. • Press to display the file status information (content number, movie title, progress time etc.).
English CONTROLS AND FEATURES To register your TV to a DivX® account To playback DivX Plus HD content: This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change.
CONTROLS AND FEATURES You can listen to music from a Multi View of available files. Multi View (USB Music) a Press QUICK to open the Quick Menu. b Press B or b to select Repeat. c 5/9999 /Folder/select Folder or File Return xxxxxxxxx xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 Press C or c to select Off, All or 1. Mode Off All 1 d a Press B b C c to select a file or folder.
English CONTROLS AND FEATURES Other features The timers Panel Lock Programme Timers – digital only Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a Press MENU / C c to highlight Setup icon.
CONTROLS AND FEATURES The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. a Press MENU / C c to highlight Function icon. b Press B / C c to highlight On Timer icon and press OK. c Press B or b to select Enable On Timer and press C or c to select On. On Timer Enable On Timer On Enable DTV Clock On Power On Time 00:00 Repeat Once Input DTV Channel a In the On Timer menu, select Enable On Timer.
English CONTROLS AND FEATURES Energy Saving Settings Digital on-screen information When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Automatic Power Down The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preference icon and press OK.
CONTROLS AND FEATURES a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK. On-screen Information icons Icon Service info Audio info D D+ AD Audio/Subtitle info Recording info Event info ●REC HD, SD 16:9, 4:3 0, 4 – 18 Timer info English Using EPG (Electronic Programme Guide) To display More Information You can choose the desired EPG system between the Broadcast Guide or MediaGuide that needs a internet connection.
English CONTROLS AND FEATURES This will tune to live TV for the particular show. Genre selection/searching If the show is not being aired, you will be directed to the Overview screen with upcoming show times. From the Guide screen, you can use the genre selection and search features. a b In the Guide screen, press QUICK. Primary Navigation menu Press B or b to highlight Genre Colour in the Quick Menu and press OK.
CONTROLS AND FEATURES Digital settings – parental control In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. Parental PIN Setup a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight System Setup icon and press OK. c Press B or b to select DTV Settings and press OK.
English CONTROLS AND FEATURES Digital settings – Channel Options Parental Setup The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. Selecting favourite channels a In the DTV Settings menu, press B or b to select Parental Control and press OK. From the Quick Menu / Channel Options menu, it is possible to create a list of the digital channels that are watched most.
CONTROLS AND FEATURES This feature allows you to set channels that will be skipped when Pu or PU are used to tune. a Subtitles Select the channel you want to skip in your channel list. b From the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box. d Press OK to select. A tick will appear in the box. e Repeat steps 1 through 4 for other channels. f Press EXIT.
English CONTROLS AND FEATURES Common Interface Software Upgrade and Licences The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM.
CONTROLS AND FEATURES English System Information and Reset TV PC Settings System Information Horizontal and Vertical Position This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc. Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen.
English CONTROLS AND FEATURES Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Input selection and AV connections See page 9 for a detailed image showing recommended connections. a In the Display Settings menu, press B or b to select PC Settings and press OK. b Press B or b to select Sampling Clock. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.
CONTROLS AND FEATURES Digital Audio Output When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected or adjusted. a Press MENU / C c to highlight Setup icon. a In the Preferences menu, press B or b to select AV Connection and press OK. b Press B / C c to highlight Preferences icon and press OK. b Press B or b to select Digital Audio Output. c Press B or b to select AV Connection.
English CONTROLS AND FEATURES Using REGZA-LINK Amplifier Control When Amplifier Control is set to on/off the connected REGZALINK amplifier. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 11). a In the REGZA-LINK Setup menu, press b to highlight Amplifier Control.
CONTROLS AND FEATURES English NOTE: • These functions depend on the device connected. • If you select the REGZA-LINK input source from the popup window, some REGZA-LINK devices may automatically turn on. • When the television is switched on it will take a few minutes for the REGZA-LINK icon to appear in the list. When an HDMI cable is removed, it will take a few minutes for the icon to disappear.
English TEXT SERVICES Text services Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
English PROBLEM SOLVING Q A Questions and Answers Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. There is a picture, but why is there little or no colour? b Country Colour System Q A Using B or b adjust to get the best picture and sound. Press OK and then EXIT.
PROBLEM SOLVING Q A Q A Q A Q A Q A Q A What is DVB-T? Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are DTV radio channels selected? Select from All Channel List (LIST button). Why is a page number visible at the top of the screen but no text? Text has been selected but Teletext information is currently unavailable on the current source.
English PROBLEM SOLVING Q A Q A Why doesn’t the Media Player feature operate? Make sure that devices are connected correctly. Incorrect behaviour may occur with a USB Hub connection. Check your network setup if using DLNA CERTIFIED™ Server. What do the LEDs on the front of the television indicate? Other problems If your TV’s problem is not addressed in this Questions and Answers section or the recommended solution has not worked, do one of the following: 1 Turn off your TV.
INFORMATION • • • • • • • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright © 1995-2009 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are trademarks of Adobe Systems Incorporated.
English INFORMATION Cleaning the screen and cabinet… Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English Media Player Supported Format Media Player Photo Media Format JPEG File Extention .jpg .jpeg Video codec Audio codec JPEG USB DMS yes yes yes no yes no – MPO .mpo MPO – BMP .bmp BMP – Movie AVI .avi MPEG-2 MPEG-4 part2 H.264 (MPEG-4 AVC) DivX Xvid MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM ADPCM MPEG-2/4 LC AAC MPEG-4 HE-AAC no MPEG-2 PS .mpg .
English INFORMATION Media Player Movie Media Format File Extention Audio codec USB DMS MKV .mkv MPEG-1 Video MPEG-2 Video MPEG-4 part2 H.264 (MPEG-4 AVC) MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM MPEG-2/4 LC AAC MPEG-4 HE-AAC no RealMedia .rm .rmvb RealVideo 8,9,10 Dolby Digital (AC-3) yes MPEG-2/4 LC AAC no Flash Video (FLV1) .flv .swf Sorenson H.263 (FLV1) H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-2/4 LC AAC L-PCM ADPCM yes no 3GPP .3gp MPEG-4 part2 H.
INFORMATION English Specifications and accessories Receiving systems Power consumption (approx.) 23RL 32RL 40RL UHF E21-E69 VHF E2-E12, S1-S41 Standby power consumption (approx.) 0.3W UHF F21-F69 VHF F1-F10, B-Q Energy Efficiency Class 23RL 32RL 40RL A A+ A+ On-mode power consumption* (approx.) 23RL 32RL 40RL 26.0W 33.6W 48.6W Average annual energy consumption** (approx.) 23RL 32RL 40RL 38.0kWh/y 49.1kWh/y 71.
Register your TV online at www.toshiba.co.uk/registration © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
