User's Manual

Annex 4 - Configuring SMS, MMS and e-mail
150
Annex 4 - Configuring SMS, MMS and e-mail
15.Enter the user name assigned to you by
your ISP in the User name: field. This is
usually the first part of your e-mail address,
before the ‘@’ sign.
16.Tap Next.
17.Enter the name of the outgoing server in the
Outgoing (SMTP) mail server: field.
18.Tick the Outgoing server requires
authentication checkbox if the outgoing
server requires authentication. This
authentication will use the user name and
password that you have already entered.
19.Tick the Use the same user name and
password for sending e-mail checkbox if
required.
20.Tap the Advanced Server Settings link to
set the following additional settings if
required.
Tick the checkboxes if you wish to enable
Secure Sockets Layer (SSL) connection.
The Network connection: field enables
you to select the network to which your e-
mail server connects.
Tap Done when you have finished.
21.Tap Next.
22.Select the frequency with which to send and
receive your e-mail in the Automatic Send/
Receive: field.
23.Tap the Review all download settings link
to set the following additional settings if
required:
The Download messages: field enables
you to set the time range for downloading
messages from the server.
Tap Advanced Settings to edit additional
settings for sending, receiving and deleting
e-mails if required.
IMPORTANT: SSL connection enables
you to send and/or receive personal
information more securely. If you select
one or both of these options and your ISP
does not support SSL connection, you will
not be able to send and/or receive e-mail.