User's Manual

Annex 5 - Configuring internet settings
155
Annex 5 - Configuring internet settings
Annex 5 - Conf iguring internet setting s
Setting up a GPRS connection
GPRS is a packet-based wireless
communication service which enables data to
be sent and received using mobile phones.
You can use GPRS to connect to the Internet or
to send and receive MMS messages using your
phone. When you use GPRS, you will usually be
billed based on the data traffic volume.
However, you should check billing information
with your service provider.
To set up a GPRS connection manually:
1. Access Network Settings.
2. Tap Network Settings.
3. Select Cellular Line (GPRS), then tap
Next.
4. In the Access point name: field, enter the
GPRS access point name (APN) for your
service provider, then tap Next.
5. In the User name: field, enter your user
name for the network, then tap Next.
6. In the Password: field, enter your password
for the network, then tap Next.
7. If you need to specify extra settings, tap one
or more of the following items and enter the
required information:
• Domain - enter the domain name, then tap
OK.
NOTE: Before you begin, you will need to
obtain the following information:
• From your phone service provider - data
connectivity plan information, access
point name, and PAP/CHAP security
settings.
• From your ISP or wireless service
provider - access point name, user
name and password, and other security
information.
n
NOTE: Before setting up a GPRS
connection, you will need to obtain the
required settings from your service
provider. As a minimum, the access point
name will be required.
n