Instruction Manual
61
CONTROLS AND FEATURES
English
System Information and
Reset TV
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
From the
SETUP
menu, press
B
or
b
to select
System
Information
.
b
Press
Q
to display the
System Information
.
c
For information about the signal quality of a particular
multiplex, press
B
or
b
to select that multiplex.
d
Press
Q
for a screen showing detailed technical
information about the selected multiplex.
Selecting
Reset TV
will reset all TV settings, including saved
channels, to their original factory values.
a
In the
SETUP
menu, press
b
until
Reset TV
is
highlighted.
b
Press
Q
to select. A screen will appear warning that
all settings will be lost. Press
Q
to continue.
When the set powers back on, the
Quick Setup
screen
will appear. Press
Q
to advance the setup and
perform an auto tune. (See ‘Quick Setup’ section on
page 15.)
PC Settings
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the television
screen. The picture position may now be adjusted to suit
personal preference.
a
In the
PREFERENCES
menu, highlight
Display
Settings
and press
Q
.
b
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
c
Press
Q
. Press
B
and
b
to select an option, then
C
or
c
to adjust the settings.
The
Clock Phase
matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a
In the
Display Settings
menu, press
b
until
PC
Settings
is highlighted.
b
Press
Q
to select, and then
b
to highlight
Clock
Phase
.
c
Use
C
or
c
to adjust until the picture clears.
System Information
Reset TV
System Information
2010
2.1.26.0 Feb 19 2010 - 15:56:50 FW:13
WEAK
Ch22
Poor
Ch25
Good
Ch35
Good
Ch46
Good
AVERAGE STRONG
TOSHIBA
Horizontal and Vertical Position
Clock Phase
Auto Format On
4:3 Stretch Off
PC Settings
Display Settings
0
0
0
0
PC Settings
Horizontal Position
Reset
Sampling Clock
Vertical Position
Clock Phase
WL75_WebOM_UK.book Page 61 Thursday, June 17, 2010 7:10 PM