® Satellite 1200 Series User’s Guide If you need assistance: ❖ InTouch® Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see Chapter 8 on page 177 in this guide. TOSHIBA C6615-1002M2 5.375 x 8.375 ver 2.
Model: Satellite 1200 Series Compact Disk-ReWritable The computer system you purchased may include a Compact DiskReWritable (CD-RW), one of the most advanced storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed. If you fail to do so, this product may not function properly and you may lose data or suffer other damage.
ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. FCC Requirements The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems.
company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service. If Problems Arise If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they will notify you in advance of this disconnection.
aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Toshiba believes Wireless LAN is safe for use by consumers.
Caution: Exposure to Radio Frequency Radiation The radiated output power of the Toshiba Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the Toshiba Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Approved Countries for use This equipment is approved to the radio standard by the countries in Fig.1. Australia Austria Belgium Canada Denmark Finland France Germany Greece Iceland Ireland Italy Japan Luxembourg Mexico Netherlands New Zealand Norway Poland Portugal Spain Sweden Switzerland UK USA Caution: Do not use this equipment except in the countries in Fig.1.
Location of the required label (Sample shown below. Location of the label and manufacturing information may vary.) CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep it for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
Notice The information contained in this manual, including but not limited to any product specifications, is subject to change without notice. TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
Computer Disposal Information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org. 5.375 x 8.375 ver 2.
Contents Introduction ..............................................................21 This guide .............................................................. 21 Safety icons ........................................................... 22 Other icons used.............................................. 23 Other documentation ............................................. 23 Service options ...................................................... 24 Chapter 1: Finding Your Way Around ........................
Contents Chapter 2: Getting Started ........................................ 35 Selecting a place to work ....................................... 35 Creating a computer-friendly environment....... 35 Keeping yourself comfortable .......................... 36 Precautions...................................................... 39 Setting up your computer ...................................... 40 Connecting the AC adapter............................... 41 Charging the main and secondary batteries ..........
Contents 15 Saving your work ................................................... 66 Printing your work ................................................. 67 Using diskettes ...................................................... 68 Inserting and removing diskettes..................... 68 Caring for diskettes.......................................... 68 Backing up your files ............................................. 69 Using your CD or DVD drive ..................................
Contents Chapter 4: Mobile Computing ................................... 87 Toshiba’s energy-saver design ............................... 87 Running the computer on battery power ............... 88 Power management ......................................... 88 Charging the battery .............................................. 89 Charging the RTC battery................................. 90 Monitoring battery power ...................................... 91 Determining remaining battery power.............
Contents 17 Lesson 9: Creating shortcuts ............................... 115 Creating a shortcut to the Calculator.............. 115 Creating a shortcut to the Character Map ...... 117 Lesson 10: Changing the screen saver................. 119 Lesson 11: Setting the date and time................... 121 Lesson 12: Removing objects from the desktop .. 122 Lesson 13: Using System Restore ....................... 124 Lesson 14: If I am lost, what do I do? .................
Contents Signing up with an Internet Service Provider 142 Surfing the Internet........................................ 143 Internet features............................................. 143 Uploading and downloading files on the Internet ......................................... 144 Exploring video features ...................................... 144 Display settings hot key ................................ 145 Exploring audio features ...................................... 146 Recording sounds.........
Contents 19 Setting audio properties................................. 165 Setting display properties .............................. 166 Customizing the control panel ....................... 167 Using WinDVD Advanced Features ...................... 169 Zooming in..................................................... 174 Panning.......................................................... 175 Zooming out .................................................. 175 Adjusting the color balance..........................
Contents If you need further assistance.............................. 210 Before you call ............................................... 210 Contacting Toshiba ........................................ 211 Other Toshiba Internet Web sites ........................ 212 Toshiba’s worldwide offices ................................. 213 Appendix A: Hot Keys ............................................. 217 Appendix B: Power Cable Connectors..................... 219 Glossary ................................
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your access to information can accompany you wherever you go. Your computer comes with either Windows® XP Home or Windows® XP Professional already installed. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Introduction Safety icons If you are new to computers, or have not used a notebook computer before, read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Introduction Other documentation 23 Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon highlights technical information about the computer. HINT: This icon denotes helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text. Other documentation Your computer comes with the following documentation: ❖ This electronic user’s guide.
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServTM warranty programs. For more information, visit Toshiba’s Web site at toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 177. 5.375 x 8.375 ver 2.
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything. If any items are missing or damaged, notify your dealer immediately. For additional help, see “If you need further assistance” on page 210. 25 5.375 x 8.375 ver 2.
Finding Your Way Around Front with the display closed Front with the display closed Display latch Modular Bay Battery pack The display latch keeps the display panel closed and locked. To open the display panel, press the display latch and raise the panel. The Modular Bay can accommodate a CD-ROM, CD-R, CD-RW, DVD-ROM, or multifunction DVD-ROM/CD-RW drive. It also supports a diskette drive, an additional hard disk drive, or secondary battery. The bay only supports one device at a time.
Finding Your Way Around Back 27 Back Cooling vent Cooling vent DC IN USB ports Parallel port Modem port Network port RGB (monitor) port Security lock slot The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at its maximum speed. CAUTION: To prevent possible overheating of the CPU, make sure you don’t block the cooling vents. The DC IN is where you plug in the AC adapter.
Ether Ether Finding Your Way Around Right side The Network port (RJ45 jack) provides access to a LAN via standard Ethernet® network cable. The RGB (monitor) port allows you to connect an external monitor. The security lock slot allows you to attach an optional PORT- Noteworthy® computer lock cable to your computer to secure it to a large, heavy object such as your desk.
Finding Your Way Around Left side 29 The cooling vent prevents the computer’s central processing unit (CPU) from overheating so that it can continue to perform at its maximum speed. CAUTION: To prevent possible overheating of the CPU, make sure you don’t block the cooling vents. Left side Speaker Headphone jack Microphone jack Line-in jack The line-in jack allows you to connect an external input device. The 3.
Finding Your Way Around Front with the display open Front with the display open Screen System indicator panel Volume control Wireless antenna on/off switch Power button On Off Indicator panel Keyboard TouchPad Secondary button Primary button Palm rest The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images. The power button turns the computer on and off. If you hold the power button down for four seconds, it will reset the computer.
Finding Your Way Around Front with the display open The system indicator panel is a series of lights that glow when certain functions are being performed by the system. For more information, see “System indicator panel” on page 32. The lights on the indicator panel provide information about keyboard functions. For a description of these lights, see “Indicator panel” on page 31. The TouchPadTM enables you to move the cursor with the stroke of a finger.
Finding Your Way Around Front with the display open The cursor control mode light glows when the cursor control overlay is on. When this light is on, pressing an overlay key moves the cursor in the direction of the white arrow printed on the key instead of typing the letter printed on the top of the key. For more information, see “Using the cursor control overlay” on page 65. The numeric mode light glows when the numeric overlay is on.
Finding Your Way Around Underside 33 The Modular Bay/secondary battery light flashes green when the Modular Bay is in use. This light is also the indicator for a secondary battery, if one is seated in the Modular Bay. CAUTION: Never turn off the computer while any drive is in use. Doing so may damage the media and result in loss of data.
Finding Your Way Around Underside The hard disk drive is the computer’s permanent data storage device. The battery pack contains the battery. For information about replacing the battery, see “Changing the main battery” on page 94. The battery release latch secures the battery cover to the computer, preventing the cover from dislodging from the computer case. 5.375 x 8.375 ver 2.
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer-friendly environment Place the computer on a flat surface which is large enough for the computer and any other items you need to use, such as a printer.
Getting Started Selecting a place to work ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ❖ Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals.
Getting Started Selecting a place to work 37 ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly. Proper seating is a primary factor in reducing work strain. Some people find a backless chair more comfortable than a conventional chair.
Getting Started Selecting a place to work ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖ Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work. Do not slump forward or lean back too far.
Getting Started Selecting a place to work 39 Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖ Take frequent breaks to change position, stretch your muscles, and relieve your eyes. A break of two or three minutes every half hour is more effective than a long break after several hours.
Getting Started Setting up your computer one is being used. Overheating of a PC Card can result in errors or instability in its operation. Be careful when you remove a PC Card that has been used for a long period. ❖ Avoid spilling liquids into the computer’s keyboard. If you do spill a liquid that gets into the keyboard, turn off the computer immediately. Leave the computer turned off overnight to let it dry out before you use it again.
Getting Started Setting up your computer 41 Your computer contains a rechargeable high-capacity battery that needs to be charged before you can use it. To use external power or to charge the battery, you must attach the AC adapter. See the next section, Connecting the AC adapter. To register your computer online, or to sign up for an Internet account, you must connect the built-in modem to a telephone line. See “Connecting the modem to a phone line” on page 77.
Getting Started Setting up your computer AC power indicator Power cable AC adapter Power cable and AC adapter DANGER: Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use. There is a risk of electric shock. Never remove the power plug from the outlet with wet hands. Doing so may cause an electric shock.
Getting Started Charging the main and secondary batteries 3 43 Connect the power cable to a live electrical outlet. The AC power and battery lights glow. CAUTION: Using the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet. Charging the main and secondary batteries To charge the main battery, plug the computer into a live wall outlet.
Getting Started Using the computer for the first time CAUTION: Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery. NOTE: Battery life and charge time may vary depending on the applications, power management settings, and features used.
Getting Started Using the computer for the first time 45 Turning on the power 1 Check that all the drives are empty. 2 Turn on the computer by pressing and releasing the power button located on the top of the keyboard. For an illustration to help you locate this button, see “Front with the display open” on page 30. NOTE: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely.
Getting Started Using the computer for the first time Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖ To move the cursor to the top of the page, push your finger forward on the TouchPad. ❖ To move the cursor to the bottom of the page, drag your finger toward yourself.
Getting Started Setting up your software 47 The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button. Check your program’s documentation to find whether it uses the right mouse button. Setting up your software The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 From the welcome screen, click Next to enter the Setup Wizard.
Getting Started Setting up your software 6 Enter your personal information in the registration window. 7 Enter your name and click Finish to complete the process. Your computer restarts automatically. Registering your computer with Toshiba Registering your computer lets Toshiba keep you up-todate with information about new products and upgrades, and also extends your Toshiba warranty worldwide at no charge to you.
Getting Started Setting up other devices 49 Setting up other devices Installing additional memory (optional) Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. Additional memory comes in various size modules. You can install a maximum of two modules in your computer’s expansion memory slots, located on the bottom of your computer. You need a standard Phillips no.
Getting Started Setting up other devices Expansion memory slot cover ? Base of a Satellite 1200 Series computer 4 Using a standard Phillips no. 1 screwdriver, unscrew the two screws that secure the expansion memory slot cover, then remove the memory slot cover. 5 Put the screws and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module.
Getting Started Setting up other devices 8 51 Gently put the memory module connector down at an angle and press down until the clips snap into place. Do not force the module into position. The memory module should be level when secured in place. Inserting the memory module CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 9 Replace the expansion memory slot cover. 10 Replace the screws and tighten them.
Getting Started Setting up other devices Removing a memory module 1 Follow steps 1 through 5 in “Using the computer for the first time” on page 44. 2 Gently push the memory locks outward until the memory module pops up. Removing the memory module 3 Gently pull the memory module diagonally to pull it out of the slot. 4 Complete the procedure by following steps 9 through 12 in “Using the computer for the first time” on page 44.
Getting Started Setting up other devices 53 Connecting a printer NOTE: Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer. NOTE: You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store. If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable.
Getting Started Setting up other devices 2 Plug the printer’s power cable into a live AC outlet. To connect a parallel printer: CAUTION: Connecting the parallel printer cable while the computer is on may damage the printer, the computer, or both. 1 Connect the printer cable to the printer and to the computer’s parallel port. To the computer To the printer Identifying the ends of a parallel printer cable 2 Plug the printer’s power cable into a live AC outlet.
Getting Started Setting up other devices The Printers and Faxes window appears. Sample Printers and Faxes window 3 Click Add Printer. The Add Printer Wizard starts. Sample Add Printer Wizard 5.375 x 8.375 ver 2.
Getting Started Setting up other devices 4 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. 5 If the printer you are setting up: ❖ Is not connected to a network, select Local printer attached to this computer. If you select Local printer, check “Automatically detect and install my Plug and Play printer.
Getting Started Turning off the computer 57 11 Click Next. The operating system prompts you to print a test page. 12 If your printer is connected and turned on, click Next. To complete the setup procedure without printing a test page, click No, then click Next. 13 Click Finish. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job.
Getting Started Caring for your computer For more information, see “Powering down the computer” on page 78. Caring for your computer This section gives tips on cleaning and moving your computer, and explains how to fit an antitheft lock. For information about taking care of your computer’s battery, see “Running the computer on battery power” on page 88. Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth.
Getting Started Caring for your computer 59 Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the disk activity lights stop glowing) and all external peripheral cables are disconnected. CAUTION: Never pick up the computer by its display panel or by the back (where the ports are located). Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips.
Getting Started Caring for your computer 3 Insert the cable’s locking end into the security lock slot, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter computer theft. Locking the computer 5.375 x 8.375 ver 2.
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working. Your computer can be configured to warn you when the battery is running low.
Learning the Basics Using the keyboard ❖ Back up your files to diskettes (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy. ❖ Use Error-Checking and Disk Defragmenter regularly to conserve disk space and help your computer perform at its optimal level.
Learning the Basics Using the keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable. ❖ The uppercase letter O and the number 0 are not interchangeable. ❖ The Caps Lock key changes only the alphabet keys to upper case — the number and symbol keys are not affected.
Learning the Basics Using the keyboard Windows® special keys Application key Windows logo key ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows® logo key opens the Start menu. ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button). Overlay keys 3 ∗ - Keyboard overlay keys The keys with numbers and symbols on the front of them form the numeric and cursor overlay.
Learning the Basics Using the keyboard 65 Using the numeric keypad overlay To turn on the numeric keypad overlay, press Fn and F11 simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖ For lowercase letters, hold down Fn while you type the letters. ❖ For uppercase letters, hold down both Fn and Shift while you type the letters.
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the Fn key and press F10 again. The cursor control mode light on the keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer.
Learning the Basics Printing your work 67 To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name. For information on how to name a file, see “Windows® XP file system” on page 102.
Learning the Basics Using diskettes Using diskettes The 3.5-inch diskette drive, which fits in the Modular Bay, lets you use either double-density (720 KB) or high-density (1.44 MB) diskettes for data transfer and storage. Eject button Diskette drive The Modular Bay light blinks when the diskette drive is in use. Inserting and removing diskettes 1 Hold the diskette so that the arrow on its upper surface points toward the drive.
Learning the Basics Backing up your files 69 ❖ Never touch the magnetic surface of a diskette. Fingerprints can prevent the drive from reading the data stored on a diskette. ❖ Never twist or bend a diskette. ❖ Keep diskettes at room temperature and avoid exposing them to direct sunlight. Otherwise data may be lost. ❖ Never place heavy objects on your diskettes. ❖ Never eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’s surface.
Learning the Basics Using your CD or DVD drive 6 Click the icon for the diskette drive (3 1/2 floppy [A:]). HINT: You can also back up a file to a diskette by clicking the file (or files) you want to backup with the secondary button, then pointing to Send To and clicking 3 1/2 Floppy (A:). Using your CD or DVD drive Your computer may have a CD-ROM drive, CD-RW drive, DVD-ROM drive, or a DVD-ROM/CD-RW multifunction drive. CD-ROM drives can play back prerecorded CDs.
Learning the Basics Using your CD or DVD drive 71 DVD-ROM drive components If you have a DVD-ROM drive, it may look like this: Drive-in-use indicator light Eject button Manual eject hole Sample DVD-ROM drive CAUTION: Never press the eject button or turn off the computer while the drive-in-use indicator light is glowing. Doing so could damage the disc or the drive. The eject button requires power to operate. The manual eject button does not require power.
Learning the Basics Using your CD or DVD drive Inserting a disc WARNING: Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control). 1 If the computer is turned on, press the eject button on the DVD-ROM drive. The disc tray partially opens.
Learning the Basics Using your CD or DVD drive 73 Inserting a disc CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. 5 Gently press the center of the disc onto the spindle until it locks into place. Spindle Correct position Disc Incorrect position Incorrect position Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle.
Learning the Basics Using your CD or DVD drive Playing an audio CD With the computer turned on, insert an audio CD and close the disc tray. The Windows MediaTM Player opens and the CD begins to play. To access the Windows MediaTM Player, you can open it through the Start menu or double-click the icon on the desktop. The first time you start the Windows Media Player, it will display in Toshiba Skin mode.
Learning the Basics Using your CD or DVD drive 75 The Windows MediaTM Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel. ❖ To stop the CD, click the Stop button. The first time you use the Windows MediaTM Player.... Playing a DVD This manual has an entire chapter devoted to using WinDVD. For information about how to play back a DVD, see “WinDVD” on page 153.
Learning the Basics Using your CD or DVD drive 3 Remove the disc from the disc tray and place it in its protective cover. CAUTION: If the disc is spinning when you open the disc tray, wait for the disc to stop before removing it. 4 Close the disc tray by pressing gently on the center of the tray until it clicks indicating that it is locked. Removing a disc with the computer off 1 Insert a slender object, such as a straightened paper clip, into the manual eject button access hole.
Learning the Basics Setting up for communications ❖ 77 To clean a disc, wipe it from the center outwards (not in a circle) with a clean, dry cloth. If necessary, moisten the cloth with water or a neutral cleaner (not benzine or rubbing alcohol). Let the disc dry completely before inserting it in the drive.
Learning the Basics Powering down the computer Connecting your computer to a network You can connect your computer to a network remotely, using the built-in modem and a dial-up connection. For specific information about connecting to the local area network (LAN) or wide area network (WAN), consult your network administrator. To use a dial-up connection, have your network administrator configure your computer for the network and supply you with the telephone number for the dial-up connection.
Learning the Basics Powering down the computer 79 Turn Off or Shut down command The Turn Off or Shut down command shuts the computer down completely. ❖ Use the Turn Off command if you are using the Windows® XP Home version operating system, or the Windows® XP Professional operating system when not connected to a domain server. ❖ Use the Shut down command if you are using the Windows® XP Professional operating system and connected to a domain server.
Learning the Basics Powering down the computer ❖ While in Hibernation mode, the computer uses no battery power. ❖ Because the state of the system is held on the hard disk, no data is lost if the battery discharges. ❖ Restarting from Hibernation mode uses less time and battery power than restarting from Turn Off or Shut down.
Learning the Basics Using Turn Off or Shut down ❖ 81 When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. NOTE: If you power down using the Standby command and the battery discharges fully, your information will be lost. Be sure to save your work first. Using Turn Off or Shut down For the Windows® XP Home operating system, follow these steps to shut down the computer: 1 Click Start, select Turn off computer.
Learning the Basics Using Turn Off or Shut down 3 Click OK. The computer shuts down completely. Turning off more quickly You can also turn off the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in the Toshiba Power Management Utility. 1 Click Start, Control Panel, then Performance and Maintenance. 2 Double-click the Toshiba Power Management Utility icon. The Power Options Properties dialog box appears.
Learning the Basics Using Hibernation 83 Using Hibernation For the Windows® XP Home operating system, or Windows® XP Professional operating system when not connected to a domain server, follow these steps to power down the computer using Hibernation: 1 Click Start, select Turn off computer. The Turn off computer dialog box appears. 2 Hold down the shift key. The Standby option changes to the Hibernation option. Sample Turn off computer dialog box 3 Click Hibernate.
Learning the Basics Using Hibernation The computer saves the mode of the system, including all open programs and files, to the hard disk, and then powers down completely. Going into Hibernation mode more quickly You can also put the computer into Hibernation mode by pressing the power button or closing the display panel. 1 Click Start, Control Panel, then Performance and Maintenance. 2 Double-click the Toshiba Power Management Utility icon.
Learning the Basics Using Standby 4 Click Apply. 5 Click OK, then close the Control Panel. 85 Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button. The computer returns to the screen you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Learning the Basics Toshiba’s online resources NOTE: If you power down using the Standby command and the battery discharges fully, your information will be lost. Be sure to save your work first. For the Windows® XP Professional operating system when connected to a domain server, follow these steps to power down the computer using the Standby command: 1 Click the Start button, then select Shut down. The Shut Down Windows dialog box appears. 2 Select Standby from the drop-down list of options.
Chapter 4 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power standby mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power Running the computer on battery power The computer contains a removable Li-ion high-capacity battery that provides power when you are away from an AC outlet. You can recharge it many times. Battery Notice To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged. Please see “Maximizing battery life” on page 96 for procedures.
Mobile Computing Charging the battery 89 CAUTION: Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s InTouch Center. Charging the battery NOTE: Battery charge time may vary depending on the applications, power management settings, and features used.
Mobile Computing Charging the battery The battery may not start charging immediately if: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almost completely discharged. Leave the power connected, and the battery should begin charging after a few minutes.
Mobile Computing Monitoring battery power 91 Monitoring battery power The battery light indicates the primary battery’s current charge. The Modular Bay light indicates the charge state of the secondary battery (if used).
Mobile Computing Monitoring battery power Sample Toshiba Power Management Battery Power Meter tab TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Mobile Computing Monitoring battery power ❖ 93 Where you are working—since operating time decreases at low temperatures Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. To change the power usage mode, hold down both the Fn and keys.
Mobile Computing Changing the main battery haw been reached. You can set how the warning occurs: sound an alarm, display a message, both, or none. You can also set the computer to enter Standby mode or Hibernate mode or to completely power down when the alarm goes off. To set an alarm: 1 Click Start, Control Panel, then Performance and Maintenance. 2 Double-click the Toshiba Power Management Utility icon. 3 Click the Alarm tab and set the alarm, as desired.
Mobile Computing Changing the main battery 95 Removing the battery from the computer 1 Save your work. 2 Turn off the computer via the Start menu or place it in Hibernate mode according to the instructions in “Using Hibernation” on page 83. 3 Remove all cables connected to the computer. 4 Close the display panel and turn the computer upside down with the front side of the computer facing you. 5 Push and hold the battery release latch, then firmly pull the battery pack toward yourself.
Mobile Computing Changing the main battery ❖ Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. ❖ Do not incinerate a spent battery, as this could cause it to explode and release toxic materials. ❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery.
Mobile Computing Disposing of used batteries safely 97 discharged. If the battery light LED flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adaptor to the computer and the power cord to a power outlet. The DC-IN or AC power-light LED should glow green, and the Battery LED should glow amber to indicate that the battery pack is being charged. If the DC-IN or AC power-light indicator does not glow, power is not being supplied.
Mobile Computing Traveling tips You must discard a battery if it becomes damaged. CAUTION: The computer’s main battery is a Li-Ion battery, which can explode if not properly replaced, used, handled, or disposed of. Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba.
Chapter 5 Getting to Know the ® Windows XP Operating System This chapter introduces the Windows® XP operating system by guiding you through a few basic tasks. If you have used a Windows® operating system before, you will find the Windows® XP operating system familiar. Whether you have used a Windows®operating system or not, the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. However, the differences are not significant and do not indicate any change in the functionality of your system.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop 101 Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking on it. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area. The icons initially displayed on your system desktop include: Toshiba Great Software Offer—A service provided by Toshiba that offers additional software.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop ❖ Access Windows Help and Support Center ❖ Run programs ❖ Suspend system activity and shut down the computer For more information on starting programs, see “Lesson 6: Starting programs” on page 110. Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together 103 You can think of your computer storage system in terms of office equipment. You have a file cabinet (device), that contains folders, and each folder may contain documents. Your office may have more than one file cabinet, just as your computer may have more than one disk drive.
1 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Using the TouchPad, move the pointer to the Start button, then click the primary button (usually the left) to open the Start menu. NOTE: In this guide, the term “click” refers to the primary button, which is usually the left-hand button. You can also double-tap the touch pad surface to perform the same function. Instructions requiring the secondary button specifically mention that button.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together 105 Sample My Computer window 6 Now click the Close button in the upper-right corner of this window. The operating system closes the My Computer window. 7 Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the TouchPad to drag the pointer to the right edge of the desktop, then release the primary button.
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet Taskbar Sample desktop with the taskbar on the right HINT: You can move the taskbar to any of the desktop’s four edges. 8 Click the taskbar once again and drag it back to the bottom of the desktop. Lesson 3: Learning about the Internet This lesson demonstrates how to access a Web page from a window and from the taskbar. The lesson assumes you have an account with an Internet Service Provider (ISP).
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document 107 you can also type a Web address in the My Computer window. 1 Click Start, then double-click My Computer. The My Computer window appears. 2 On the View menu, point to Toolbars, then click Address Bar if it is not checked. The operating system displays the address bar. It indicates that you are in “My Computer.
2 Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document Click New, then click Text Document. The operating system creates an icon on the desktop called New Text Document with the icon name highlighted. 3 To give your document a meaningful name, type My New Doc.txt and press Enter. 4 Double-click the My New Doc icon. The operating system opens the new document in Notepad—the text editor built into the operating system.
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder 109 Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is analogous to a file folder stored in a file cabinet. In this case, a disk drive in the computer is the file cabinet. The operating system stores documents and programs in folders. It even stores other folders in folders.
7 Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Close the window by clicking its Close button and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task. This lesson teaches you how to launch programs from the Start menu, using two of the programs that are built into the Windows® XP operating system: Paint and Windows Explorer.
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs 111 3 To open the second program, click Start, then click All Programs. 4 Point to Accessories, then click Windows Explorer. The operating system opens Windows Explorer, which provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning windows so that you can see more than one of them at a time. You can also hide windows by removing them from the desktop without actually closing your document or program.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows 2 113 Click the Minimize button at the top-right of the Explorer window to hide the window. Windows Explorer disappears from the desktop. However, it is still open, as you can see from the taskbar. HINT: Minimizing program windows is a good way to clean up the desktop without actually closing programs. 3 Click the Maximize button in the top-right corner of the Paint window.
4 Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the title bar of the Paint window and drag it to the left side of the desktop. You can move any window by clicking its title bar and dragging it. 5 Click Windows Explorer button on the taskbar. 6 Repeat steps 3 and 4 to change the size and position of Windows Explorer, placing it on the right side of the desktop.
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs 115 Lesson 8: Closing programs Once you are finished working with a document or program, it is a good idea to close it. While you can run several programs at the same time, having a large number of programs and documents open simultaneously can slow down your computer. This lesson teaches you how to close the programs you opened earlier in this tutorial.
1 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Move the pointer to an empty area of the desktop, then click the secondary button. The operating system displays the desktop shortcut menu. 2 Click New, then click Shortcut. The operating system displays the Create Shortcut dialog box. Sample Create Shortcut dialog box 3 In the Command line box, type c:\windows\system32\calc.exe and click Next. The operating system prompts you to select a name for the shortcut.
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts 117 Creating a shortcut to the Character Map Use this method when you don’t know the name and location of the program file. 1 Click Start, then point to Search. Sample Search options on the Start menu 2 Click All Files and Folders. The operating system displays the Search Results dialog box. 5.375 x 8.375 ver 2.
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Search Results dialog box HINT: Search also allows you to perform searches on the Internet. 3 Type char in the All or part of the file name: text box, and then click Search. The operating system displays a list of all the files with “char” in their names. 4 Click the Character Map file with the secondary button and drag it to the desktop. A shortcut menu appears. 5 Click Create Shortcut here.
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver 119 Clicking a shortcut icon opens the program or folder immediately. You can place as many shortcuts on your desktop as you find useful. HINT: The Character Map is a useful tool when you want to add a special character to a document. Lesson 10: Changing the screen saver You can personalize the background area of your desktop with pictures, patterns, or colors. The background is considered a “property” of your desktop.
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver The operating system opens the Display Properties dialog box. Sample Display Properties dialog box 3 Click the Screen Saver tab. 4 Click the arrow beside the current option to open the screen saver list box. 5 Scroll through the screen saver options by clicking the scroll arrows in the list box. 6 Try a screen saver pattern by clicking a name in the list box.
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time 121 The next lesson explains how to set two other properties—the date and time. Lesson 11: Setting the date and time You initially set the computer’s date and time properties when you turned the computer on for the first time and set up the operating system. To change the date and time settings: 1 Click Start, then click Control Panel. 2 Click the Date, Time, Language, and Regional Options icon.
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop 4 Click the Time zone drop-down list box and set your time zone. 5 Click OK. There is a third tab, Internet Time, which when selected allows you to have Windows® XP automatically synchronize your time. However, you need to be connected to the Internet for this function to work. Continue with the next lesson to finish cleaning up the desktop.
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop 123 Sample Recycle Bin open on the desktop 4 To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs. Still, the process is the same. Just drag an object’s icon to the Recycle Bin.
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. Click Yes to confirm that you are sure. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? 125 The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows® XP operating system.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index. 3 Type pictures in the Type in the keyword to find: text box. Notice as you type that the index moves to locate what you typed. When you type the letter p, the topic list moves to the first entry that begins with P, and so on.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? 127 program to look at it while you read about the program in the Help topic. Using the online tours and tutorials Whether you are new to computers or you have some experience, the Windows® XP Tours and Tutorials collection is a good place to start. If you are not familiar with the Windows® XP operating system, start with “Windows XP Preview.
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Lesson 15: Turning off your computer It is very important that you let the Windows® XP operating system shut down your computer. As it shuts down, the operating system performs a number of tasks that ensure that everything is in place the next time you turn on the computer. This lesson teaches you how to shut down the operating system and turn off your computer.
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer.
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work.
Exploring Your Options Personalizing your desktop 131 Bringing the world to your desktop With the Windows® XP operating system you can set up your desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: 1 Point to an empty space on the desktop and click the secondary button. 2 Click Properties. The Display Properties window appears. 3 Click the Desktop tab.
7 Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. 8 To select some other Web site, type the address of the Web site you want or click Browse to locate it. You can configure the Web content interface in several other ways. For further information, see your operating system documentation or access Windows® Help by clicking Start, Help and Support Center.
Exploring Your Options Personalizing your desktop 133 The My Computer window appears. 2 Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box 3 Click the preferred options. 4 Click Apply, then OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Exploring Your Options Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus. You can also add these toolbars to the taskbar. Address bar Standard buttons Sample toolbar locations 5.375 x 8.375 ver 2.
Exploring Your Options Personalizing your desktop 135 The elements you can add to the top of the window are: Toolbar element Description Address Bar Opens Web pages, programs, folders, or documents. By default, the address bar shows your current location, and whether it is a folder or a Web page. You can browse to another location by typing an address — a URL, a path, or even a program name. If you start typing a previously typed address, the AutoComplete feature finishes the address for you.
Exploring Your Options Using your computer at the office 2 Open the folder you want to view as a Web page. 3 In the Tools menu, select Folder Options. 4 In the Tasks section, click the button for Show common tasks in folders. 5 Click Apply, then OK. Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page.
Exploring Your Options Using your computer at the office 137 Setting up for communications In order to connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (one comes with your computer) ❖ A telephone line ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you plan to use the Internet Determining the COM port Your modem is connected to one of the computer’s COM (communicatio
7 Exploring Your Options Using your computer at the office To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Modem AMR Properties box appears. 8 In the device status area, the computer should indicate whether the modem is working properly. 9 If the modem isn’t working properly, click Troubleshooting and follow the instructions. 10 Click OK to close the properties box, then the Phone and Modem options box. 11 Close the Control Panel.
Exploring Your Options Exchanging data with another computer 5 ❖ Set up a home or small office network ❖ Set up an advanced connection 139 Click Next and follow the directions on the screen. The computer connects to the network. Exchanging data with another computer To transfer a large amount of information between computers, you need a wireless or physical connection and a synchronization program.
Exploring Your Options Connecting to the Internet Getting help transferring files 1 Click Start, then Help and Support. The Help and Support window appears. 2 Click the Index button. 3 In the dialog box, type direct cable connections. 4 Follow the online guide instructions.
Exploring Your Options An overview of using the Internet 141 Using a modem If you’re using a modem, you connect the modem to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it. For more information on connecting a modem, see “Connecting the modem to a phone line” on page 77.
Exploring Your Options An overview of using the Internet The World Wide Web The World Wide Web (or ‘Web’) is a subset of the Internet — a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP). The World Wide Web offers information as text, images, audio, or video to be referenced from anywhere in the world.
Exploring Your Options An overview of using the Internet 143 Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
❖ Exploring Your Options Exploring video features Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale.
Exploring Your Options Exploring video features 145 Display settings hot key Using the Fn + F5 keys, you can set your system’s display to view DVD movies or presentations on an external device. In this instance, there is an alternative way in which you can manually set the display for external viewing. 1 Right-click anywhere on your desktop and select Properties. The Display Properties dialog box appears. Sample Display Properties dialog box 2 Click the Setting tab. 3 Click the Advanced button.
Exploring Your Options Exploring audio features Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone jack and using the Sound Recorder feature in the operating system. DEFINITION: A .
Exploring Your Options Exploring audio features 147 Positioning bar Record Stop Play Skip forward Skip backward Sample Sound Recorder screen 3 Click the Record button and speak normally into the microphone. NOTE: You can only record 60 seconds at a time. 4 When you have finished recording, click the Stop button. 5 To hear what you just recorded, click the Play button. 6 To save the file, select Save from the File menu.
4 Exploring Your Options Connecting a monitor, keyboard and mouse Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. TECHNICAL NOTE: Use amplified speakers that require an external power source.
Exploring Your Options Changing the display properties setting 149 Changing the display properties setting 1 Right-click anywhere on your desktop and select Properties. The Display Properties dialog box appears. Sample Display Properties dialog box 2 Click the Settings tab. 3 Slide the Screen area slider bar toward Less until the setting reads 800 x 600. 4 The Monitor Settings window appears and asks if you want to keep the settings. 5 Click Yes.
Exploring Your Options Using PC Cards Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your computer has two stacked PC Card slots and supports three types of PC Cards: ❖ Two Type I and Type II cards. ❖ One Type III card. Check the documentation that came with the PC Card to see if it conforms to the PCMCIA 2.
Exploring Your Options Using PC Cards 151 To insert a PC Card: 1 Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card. 2 Align the card connectors with an available PC Card slot and carefully slide the card into the slot until it locks into place. NOTE: If you have a Type III card, insert the connector into the lower slot.
Exploring Your Options Using PC Cards Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use. For example: ❖ Never remove a hard disk card while the system is accessing it. ❖ Never remove a network card while you are connected to a network.
Chapter 7 WinDVD WinDVD is a software program for playing back CDs, VideoCDs and DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or DVD-ROM/CD-RW multifunction drive, you can use InterVideo WinDVD™ to play DVDs. WinDVD is an easy-to-use, full-featured multimedia control center that helps you get the most out of the exciting world of DVD technology.
WinDVD Playing DVDs WARNING: Before playing a DVD, turn down the volume. Playing the disc at maximum volume could damage your ears. See “Using the control panel playback buttons” on page 157 to locate the volume control buttons. Fit the DVD-ROM or DVD-ROM/CD-RW drive into the Modular Bay. Insert a DVD into the drive, following the instructions in “Inserting a disc” on page 72. The computer automatically detects the disc in the drive and opens WinDVD.
WinDVD Playing DVDs 155 Using the WinDVD toolbar The WinDVD window contains a toolbar at the top and a status bar at the bottom. If the toolbar or status bar does not appear, you can display them by following the instructions in “Setting general properties” on page 163. The toolbar contains basic DVD playback controls. Pause the pointer over a button to display its definition. The toolbar also contains an adjustment button (see “Adjusting the color balance” on page 175 for more information).
WinDVD Playing DVDs Using the WinDVD control panel The WinDVD control panel resembles the control panel of a standard home DVD player. TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them.
WinDVD Playing DVDs 157 From the WinDVD control panel, you can open an expanded control panel by clicking the expanded controls button. The expanded control panel contains several advanced features. See “Using WinDVD Advanced Features” on page 169 for an explanation of these features. Using the control panel playback buttons Once you have inserted a DVD and started WinDVD, you are ready to play the disc.
WinDVD Playing DVDs Click this Or use keyboard shortcut To do this Repeat — repeat the current None chapter, if the DVD contains chapters. Otherwise this button repeats the DVD from the beginning. When the repeat button is activated, the repeat symbol appears to the left of the chapter number on the control panel counter. The DVD continues to repeat until you click the repeat button again, and the repeat symbol no longer displays on the control panel. Eject — open the DVDROM drive disc tray.
WinDVD Playing DVDs Click this 159 Or use keyboard shortcut To do this Fast backward — move R quickly backward through the DVD content. When you reach the desired location, click the play button to resume playing the DVD. Previous — move to the beginning of the previous chapter and resume playing the DVD. PgUp Next — move to the next chapter and resume playing the DVD. PgDn Fast forward — move quickly forward through the DVD content.
WinDVD Using playlists Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window. Using playlists TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD.
WinDVD Using playlists 161 Creating playlists 1 On the WinDVD control panel, click the playlist button. The Playlist window appears. Sample Playlist window 2 Click the File button in the lower left corner of the window, to indicate that you are creating a playlist of individual files. 3 In the left display select the drive and folder where the DVD files are located. In the upper right window, select the file you want to play first and click Add to put it at the top of the playlist.
5 WinDVD Customizing WinDVD When you have finished creating your playlist, click Save Playlist to save it. You do not assign a name to the saved playlist, as you can only save one playlist at a time. After saving the playlist, a confirmation dialog box appears. 6 Click OK to close the confirmation dialog box, then click OK to close the Playlist window. Loading and playing playlists 1 In the Playlist window, click File to display the saved playlist of files.
WinDVD Customizing WinDVD 2 163 On the WinDVD control panel, click the Properties button. WinDVD displays the Properties dialog box, with the General tab on top. Sample Properties dialog box with the General tab on top Setting general properties You use the General tab to select the region code, the drive letter assigned to the DVD-ROM drive, the autoplay default option, and which WinDVD toolbars are displayed by default. Region coding is part of the protection system for DVD content.
WinDVD Customizing WinDVD NOTE: Most DVD-ROM drives let you change the region code, usually between one and five times. Once a drive has reached the limit, the region code cannot be changed again. Pay careful attention to the Remaining times until permanent box on the General properties tab. 1 To change the region code, select the desired option in the Current regions list.
WinDVD Customizing WinDVD 165 Setting audio properties NOTE: The DVD author determines which features the DVD supports. When playing a DVD, some of the control panel features may be unavailable. Unsupported features appear gray, and you cannot select them. 1 In the Properties dialog box, click the Audio tab. The Audio tab moves to the front. The Current audio track box displays the current audio format and attributes. Sample Properties dialog box with Audio tab on top.
WinDVD Customizing WinDVD ❖ No vocal does not output vocals to any speaker. ❖ Left vocal outputs vocals to left speakers only. ❖ Right vocal outputs vocals to right speakers only. ❖ Both outputs vocals to both left and right speakers. 4 In the Dolby Pro Logic box, select the Always enable check box to enable Dolby Pro Logic. Clear the check box to disable it. 5 To test Dolby Pro Logic, click the Test button. Setting display properties 1 In the Properties dialog box, click the Display tab.
WinDVD Customizing WinDVD 167 4 Select the OSD (On Screen Display) check box to enable OSD. Otherwise, clear the check box. 5 Click OK to save the settings. Customizing the control panel You can customize the appearance of your WinDVDTM 2000 player’s control panel. To configure the control panel’s appearance: 1 Position the pointer over the control panel, then click the secondary button to display a shortcut menu of control panel options. WinDVD control panel options 5.375 x 8.375 ver 2.
2 WinDVD Customizing WinDVD You can select a new control panel background color, or select WinDVD to display the control panel in a different format. Sample new WinDVD control panel appearance You can also select About to display copyright and version information. 5.375 x 8.375 ver 2.
WinDVD Using WinDVD Advanced Features 169 Using WinDVD Advanced Features TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them. The features described in this section are available on the WinDVD expanded control panel.
WinDVD Using WinDVD Advanced Features Use this To do this Or use keyboard shortcut Playback speed— None control the speed at which the DVD plays. Move the slider to the left to slow the playback speed or move it to the right to play the DVD faster. Placing the slider in the center plays the DVD at normal speed, and enables the audio. The audio is automatically muted at any other playback speed. Brightness — move + (increases) the slider to the right - (decreases) to increase video brightness.
WinDVD Using WinDVD Advanced Features Use this To do this Or use keyboard shortcut Numeric keypad — 0 - 9 use these buttons to select a chapter by entering the chapter number. After you have entered a chapter number, click the check mark button on the right of the middle row on the numeric keypad to begin playing that chapter. You can clear an entry by clicking the clear (X) button on the lower left corner of the numeric keypad. Menu button — dis- None plays all available menus for the current DVD.
WinDVD Using WinDVD Advanced Features Use this To do this Or use keyboard shortcut Chapter button — C displays a list of all the chapters in the current DVD. Select the chapter you want to play, or use the numeric keypad to enter the chapter number. Title button — Dis- T plays a list of all the titles on the current DVD. Click the title you want to play, then click Enter. Audio tracks — dis- A plays a list of all the audio track options.
WinDVD Using WinDVD Advanced Features Use this To do this Or use keyboard shortcut Subtitles — displays S a list of all the available language subtitles. This button is enabled only for DVD content that includes subtitles and supports dynamic subtitle information changes. Select the desired language, or select Default to display subtitles in the DVD’s default language. Camera angles — G display a list of all the available camera angles.
WinDVD Using WinDVD Advanced Features Use this To do this Or use keyboard shortcut Bookmark — save an None unlimited number of locations on the DVD for quick reference. On the bookmark shortcut menu, click Add to open the Add Bookmark dialog box. Type a bookmark name, then click OK. The bookmark name appears on the bookmark shortcut menu. Click the bookmark name to go to that location on the DVD. Click Delete All to delete all bookmarks.
WinDVD Using WinDVD Advanced Features 4 175 Release the primary button. WinDVD automatically fills the window with the selected area. Panning Once you are zoomed in on an area of the WinDVD video window, you can move the zoom window location using the pan feature. 1 With the video window in zoom mode, click the pan button, located in the lower-right corner of the directional button panel. 2 With the pointer over the center of the window, drag the zoomed window up, down, left or right.
WinDVD Launching an Internet browser from WinDVD The adjustment dialog box provides another set of sliders for adjusting volume and brightness. It also provides two color control sliders. Move the Color control 1 slider to the right to increase the blue and decrease the yellow color values. Move the slider to the left to increase the yellow and decrease the blue color values. Move the Color control 2 slider to the right to increase the red and decrease the green color values.
Chapter 8 If Something Goes Wrong Some problems you may encounter when using your notebook computer are relatively easy to identify and solve. Others may require help from your dealer or the manufacturer of a software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Your program stops responding.
If Something Goes Wrong To close a program that has stopped responding in the Windows® XP Home operating system: 1 Press Ctrl, Alt, and Del simultaneously. 2 The Windows Task Manager appears. 3 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Windows Task Manager Applications tab 4 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
If Something Goes Wrong 179 Windows Task Manager Shutdown menu, Turn Off option The computer shuts down. To close a program that has stopped responding in the Windows® XP Professional operating system: 1 Press Ctrl, Alt, and Del simultaneously. 2 Click the Task Manager. 3 Click the Applications tab. 4 Select the program you want to close, then click End Task. 5 Close the remaining programs one by one by selecting the program name, then End Task. 6 Click Start and point to Shut Down.
1 If Something Goes Wrong Problems when you turn on the computer Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. 2 Press Ctrl and c simultaneously to copy the text to the clipboard. 3 Open Notepad (click Start, point to All Programs, then point to Accessories and click Notepad). 4 Press Ctrl and v simultaneously to paste the details into Notepad.
If Something Goes Wrong The Windows operating system is not working ® 181 Clearing the condition may get the computer running, but it won’t solve a resource conflict. Read the documentation that came with the conflicting device and “Resolving a hardware conflict” on page 184. The computer displays the WARNING RESUME FAILURE message. The computer was placed in Standby mode and the battery has discharged. Data stored in the computer’s memory has been lost. Press Enter to continue booting.
If Something Goes Wrong The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
If Something Goes Wrong The Windows operating system is not working ® 183 Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, time of day (when everyone else is surfing, your access can be slow) and popularity of the site. If accessing a particular site is very slow, try later. My browser can’t find the URL address I typed in.
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from the menu. That takes you to: http://support.microsoft.com/directory/. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows® Help and Support to troubleshoot the problem first. For help on hardware conflicts: 1 Click Start, then click Help and Support.
If Something Goes Wrong Resolving a hardware conflict 185 Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works. These channels of communication are commonly referred to as system resources.
If Something Goes Wrong Resolving a hardware conflict Resolving conflicts There are three things you can do to resolve hardware conflicts: ❖ Disable the device. For an older device, remove it from the computer. For a Plug and Play device. ❖ Disable another system component and use its resources for the new device. ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device.
If Something Goes Wrong Resolving a hardware conflict 5 187 To enable a device, look at the far right of the toolbar. Look for an icon of a monitor with a strike mark through a circle on the front. When you mouse over the small icon, the status of Disabled displays. To disable a device, look at the far right of the toolbar. Look for an icon of a monitor with a blue check mark on it. When you mouse over the small icon, the status of Enabled displays. 6 Click the icon.
If Something Goes Wrong Resolving a hardware conflict ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, DVD-ROM, CD-ROM, floppy disk drive, and other power-using functions. ❖ The Drivers tab, which displays the drivers being used by the device. A Troubleshooting button is also present. Click troubleshooting. A Help and Support window for that device appears.
If Something Goes Wrong Resolving a hardware conflict 189 the memory module installed, the error is not caused by the memory module. NOTE: Toshiba recommends using only memory approved by Toshiba. Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery and optional secondary battery). Power problems are interrelated. For example, a faulty AC adapter or power cable will neither power the computer nor recharge the batteries.
If Something Goes Wrong Resolving a hardware conflict If the battery has completely discharged, it will not begin charging immediately. Leave the AC adapter and power cable connected, wait 20 minutes and see if the battery is charging. If the battery light is glowing after 20 minutes, let the computer continue charging the battery for at least another 20 minutes before you turn on the computer.
If Something Goes Wrong Resolving a hardware conflict 191 that the program does not assign different meanings to any of the keys. You have connected an external keyboard and the operating system displays one or more keyboard error messages. If you have a second keyboard, try it. If it works, the first keyboard may be defective or incompatible with your computer. Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect.
❖ If Something Goes Wrong Resolving a hardware conflict Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box. The Appearance tab of this dialog box allows you to choose the colors for the screen.
If Something Goes Wrong Resolving a hardware conflict 193 The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode. Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors.
If Something Goes Wrong Resolving a hardware conflict ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors ❖ Click Start. Error-checking runs the test. Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, point to All Programs, Accessories, System Tools, and click Disk Defragmenter. Your data files are damaged or corrupted.
If Something Goes Wrong Resolving a hardware conflict 195 The computer displays the Non-system disk or disk error message. If you are starting the computer from the hard disk, make sure there is no diskette in the diskette drive. If there is, remove it. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette and restart the computer.
If Something Goes Wrong Resolving a hardware conflict You press the disc eject button, but the drive tray does not slide out. Make sure the computer is connected to a power source and turned on. The DVD-ROM drive eject mechanism requires power to operate. To remove a disc without turning on the computer, use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the disc eject button on the right side of the computer.
If Something Goes Wrong Resolving a hardware conflict 197 forward and rewind during the legal notices at the beginning of a movie. Playback performance is poor. The use of DMA dramatically increases the DVD playback performance of your system. To make sure DMA is turned on and to check its settings: 1 Click Start, then Control Panel. 2 Click the Performance and Maintenance icon, then click the System icon. 3 Click Hardware tab, then the Device Manager button.
If Something Goes Wrong Resolving a hardware conflict resource requirements and your current system configuration. Also, if you change your operating system, check with your PC manufacturer or your graphics card vendor to ensure that you have the appropriate drivers for both your hardware (for example, the graphics card) and software (drivers must support the operating system and DVD with WinDVD). Slow playback performance. DVD playback is a resource intensive application.
If Something Goes Wrong Resolving a hardware conflict 199 WinDVD will not function properly with “debug” software installed. The WinDVD application will not function properly if it detects that debug software is present on the system. Remove the debug software to restore functionality of WinDVD. Minimum system requirements WinDVD performs best when these recommended components are present in your system: ❖ Sound card (with 48 KHz sampling rate support) ❖ DirectX® Foundation 6.
If Something Goes Wrong Resolving a hardware conflict Error message and additional information ® ® ® ® Microsoft DirectShow components are missing. Microsoft DirectShow is not installed properly on the system. No audio subsystem could be found for playback. Resolution ® Reinstall Microsoft ® DirectShow version 6.0 or higher (available from the Microsoft Web site). Check installation of the sound card drivers. There is a problem with the audio card or audio component within the system.
If Something Goes Wrong Resolving a hardware conflict 201 Error message and additional information Resolution The audio settings are incorrect. Please check sound card or drivers. Check installation of the audio card drivers. The audio card was found, but there is a problem with the audio card or drivers. The wrong audio driver may be installed in the system. An unexpected error has occurred. This is usually a rare, title-specific problem. This error is unclassified.
If Something Goes Wrong Resolving a hardware conflict Error message and additional information Resolution This DVD disc cannot be played in this region. Use DVD content from the appropriate region. If applicable on your system, refer to the Help file for how to change the Region Code. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
If Something Goes Wrong Resolving a hardware conflict 203 Error message and additional information Resolution This file appears to contain unsupported data. Please refer to the Supported Formats section of the WinDVD Help file and ensure that this file contains valid data. The drive or disc cannot be found. Check the DVD-ROM drive or DVD disc. Ensure the disc is a valid type (DVD-Video, Video CD, or audio CD). This may be caused by one of the following: No disc in the DVD-ROM drive.
If Something Goes Wrong Resolving a hardware conflict in the Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you’re having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
If Something Goes Wrong Resolving a hardware conflict 205 PC Card checklist ❖ Make sure the card is inserted properly into the slot. See “Inserting PC Cards” on page 150 for how to insert PC Cards. ❖ Make sure all cables are securely connected. ❖ Make sure the computer is loading only one version of Card and Socket Services. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address. See “Fixing a problem with Device Manager” on page 186 for more information. Since all PC Cards share the same socket, each card is not required to have its own address.
If Something Goes Wrong Resolving a hardware conflict 207 A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line).
If Something Goes Wrong Resolving a hardware conflict The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print. Contact the software manufacturer for more information. Modem problems This section lists common modem problems: The modem will not receive or transmit properly.
If Something Goes Wrong Develop good computing habits 209 Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 61 for instructions. On a regular basis, back up the information stored on your hard disk.
If Something Goes Wrong If you need further assistance Your local computer store or book store sells a variety of selfhelp books you can use to supplement the information in the manuals. If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help.
If Something Goes Wrong If you need further assistance 211 Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. 1 Start with accessing Toshiba on the Internet using any Internet browser by typing support.toshiba.com 2 Next, try one of Toshiba’s online services. The Toshiba Forum can be accessed through CompuServe® by typing: go toshiba.
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA www.toshiba.ca Canada www.toshiba-Europe.com Europe www.toshiba.co.jp/index.htm Japan http://servicio.toshiba.com Mexico and all of Latin America 5.375 x 8.375 ver 2.
If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Austria Toshiba Europe GmbH Handelskai 388 1020 Wien, Austria Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Canada Toshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada Czech Republic CHG Toshiba, s.r.o.
If Something Goes Wrong Toshiba’s worldwide offices Hungary Technotrade Kft. Szerencs utca 202 1147 Budapest Hungary Ireland Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom Italy Progetto Elettronica 92 s.r.l. Viale Certosa 138, 20156 Milano Italy Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Luxembourg Toshiba Information Systems Benelux B.V.
If Something Goes Wrong Toshiba’s worldwide offices 215 Poland TECHMEX S.A. ul. Partyzantów 71, 43-316 Bielsko-Biala 01-059 Warszawa Poland Portugal Quinta Grande Assisténcia Técnica Informática, Lda. Av. Moinhos no. 15A Ur. Quinta Grande 2720 Alfragide Portugal Singapore Toshiba Singapore Pte. Ltd. 438B Alexandra Rd. # 06-01 Alexandra Technopark Singapore 119968 Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Slovenia Inea d.o.o.
If Something Goes Wrong Toshiba’s worldwide offices The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany 5.375 x 8.375 ver 2.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Instant password security F1 Fn + This hot key blanks the display. To resume working, if you have registered a user password, press Enter, type your password and press Enter. If there is no registered password, press Enter.
Hot Keys Sound Sound F4 + This hot key cycles through the different alarm volume levels. Fn The alarm volume options are: Off, Low, Medium, and High. Off is always first. Display modes F5 + This hot key cycles through the power-on display mode options.
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia Europe AS approved VDA approved NEMKO approved 219 5.375 x 8.375 ver 2.
Power Cable Connectors - Blank Page - 5.375 x 8.375 ver 2.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide.
Glossary DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission FIR fast infrared GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IEEE Institute of Ele
Glossary 223 PCMCIA Personal Computer Memory Card International Association RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may appear
Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Glossary 225 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed — The speed at which the central processing unit (CPU) communicates with the other parts of the computer. byte — A sequence of eight bits. A byte is the smallest addressable unit of data.
Glossary color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Glossary 227 direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk.
Glossary drag — To hold down the TouchPad control button or mouse button while moving the cursor to drag a selected object. In the Windows® operating system, this refers to the primary TouchPad control button or left mouse button, unless otherwise stated. driver — See device driver. DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data.
Glossary 229 file extension — The three characters following the period (pronounced “dot”) at the end of a file name. The extension indicates the type of file. Examples are .exe for program files and .hlp for help files. See also file name. folder — Also called directory. A container for organizing files saved to a disk. A folder is symbolized on screen by a graphical image (icon) of a file folder. A folder can contain files and other folders.
Glossary Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off. See also Standby, Suspend. high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette.
Glossary 231 L2 (level two) cache — Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory. See also cache, CPU cache, L1 cache. LAN (local area network) — A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network.
Glossary modem — Short for “modulator/demodulator.” A device that converts information from digital to analog and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines. motherboard — The main circuit board in the computer. It contains the processor, memory, and other primary components. MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Glossary 233 parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel. Compare serial. password — A unique string of characters entered by a user to verify his or her identity to the computer or the network.
R Glossary RAM (random access memory) — Volatile memory that can be written to as well as read. By volatile, we mean that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM. random access memory — See RAM. read-only memory — See ROM. reboot — See boot, restart. removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk.
Glossary 235 serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. shortcut — See keyboard shortcut. software — See program. Compare hardware.
W V Glossary Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 802.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet.
Index A AC adapter 41 AC power light 32, 41, 45 Accessories programs 111, 124 adding memory 49 audio features 146 avoiding injury 36 B battery caring for 95 changing 94 charge not lasting 190 charging 43, 57, 89 conserving power 92 disposal 97 installing 94 light 32, 45, 91 Li-on 88 monitoring power 91 not charging 189 removing 95 RTC (real-time clock) 88, 90 battery cover 34 latch 34 buttons CD Player 75 DVD-ROM drive eject 71 PC Card eject 28 power 30 Start 101 C calculator 115 caps lock light 31 Card
channels DMA 185 Character Map 117 charging main battery 43, 57, 89 RTC (real-time clock) battery 90 checking device properties 187 cleaning CD or DVDs 76 computer 58 diskettes 68 click 46 closing programs 115 comfort chair 37 lighting 38 work habits 39 commands Hibernate 79 powering down 78 Standby 80 Turn Off 79 communications programs 77 setting up 77 system resources 185 via modem 77 compact discs inserting 72 problem solving 196 removing 75 using 70 computer cleaning 58 lock 59 moving 59 non-system
major features 100 properties 119 shortcut menu 104 Start button 101 system tray 102 taskbar 102, 112 Device Manager 186 checking properties 187 disabling a device 186 dial-up connection 78 Dial-Up Networking Wizard 78 Digital Subscriber Lines (DSL) 140, 142 Digital Versatile Discs 70 DirectShow 199 DirectX Foundation 199 Disk Defragmenter 194 disk drive corrupted/damaged data files 194 missing files/trouble accessing a disk 193 running slow 194 diskette drive 68 can’t insert a diskette 194 can’t read
WinDVD 199 expansion memory slot 50 cover 33 external monitor connecting 136, 148 not working 193 external speakers 148 F FAT (File Allocation Table) 193 files 102 backing up 62, 69 copying to diskette 69 printing 67 saving 61, 66 transferring 139 folders 102 displaying information 135 FreedomWare 101 front panel 31 function keys 63 H hard disk drive light 32, 45 hardware conflicts 184 resolving 186 headphone jack 29 Help 125, 183 Hibernate restarting 85 using 83 Hibernate mode 57 Hibernation 79 hidin
K keyboard 30 character keys 63 Ctrl, Fn, and Alt keys 63 cursor control overlay 65 function keys 63 hot keys 218 indicator panel 31 not working 180, 191 numeric keypad overlay 65 overlay keys 64 unexpected characters 190 Windows special keys 64 L light, wireless indicator 32 lights AC power 32, 41, 45 battery 32, 45, 91 caps lock 31 cursor control mode 32 diskette activity 68 hard disk drive 32, 45 numeric mode 32 on/off 32 system 31 lock slot 28 M main battery changing 94 removing 95 memory adding 4
palm rest 31 parallel port 27 password instant 217 PC Card Card and Socket Services 150 checklist 205 CIS (Card Information Structure) 204 computer stops working 206 eject button 28 errors 207 hot swapping fails 206 inserting 150 modem default 137 not recognized 206 problem solving 204, 205 removing 151 replacing 152 slots 28 using 150 PCMCIA (Personal Computer Memory Card International Association) 150 Plug and Play 185 ports modem 27 monitor 28 parallel 27 USB 27, 28 power cable 43 cable connectors 2
194 video content poor 198 DVD-ROM performance is poor screen does not look right/flickers 197 192 DVD-ROM slow playback 198 external display not working 193 external keyboard not working 191 external monitor 191 faulty memory 188 hardware conflict 184, 185 hardware conflict caused by legacy device 185 Help 183 high-pitched noise 203 illegal operation 179 Internet bookmarked site not found 183 Internet connection is slow 183 keyboard not responding 180 keyboard produces unexpected characters 190 m
S safety computer 98 disposing of batteries 97 icons 22 precautions 39 saving your work 66 ScanDisk 193 screen blank 191 doesn’t look normal/flickers 192 Screen Saver tab 120 Search Engine 143 secondary button 47 security fitting a computer lock cable 59 instant password 217 lock slot 28 SelectServ 24 setting up AC adapter 41 communications 77 computer 35, 41, 49 date and time 121 printer 54 shortcut creating 115 menu 104 sound .
U Uniform Resource Locator (URL) 130, 143 uploading 144 URL (Uniform Resource Locator) 130, 143 USB (Universal Serial Bus) port 27, 28 USB mouse connecting 52 using Hibernate 83 modem 77 PC Cards 150 Standby 85 changing the screen saver 119 closing programs 115 creating a new folder 109 creating a text file 107 creating shortcuts 115 desktop 100 Help 125, 183 problem solving 181 Recycle Bin 122 removing objects 122 resizing or moving windows 112, 113 V video features exploring 144 volume, adjustin
system requirements 199 toolbar 155 video content poor 198 video window, maximizing 160 zoom 174, 175 wireless indicator light 32 Wizards Add Printer 54 Windows PC Card 204 World Wide Web 142 5.375 x 8.375 ver 2.
