User's Manual

60
Getting Started
Recovering the Internal Storage Drive
9 When the recovery process is complete, the “Recovery of
Factory Default Software” screen appears, indicating that the
recovery process is complete. Click Finish to restart the
computer.
(Sample Image) Recovery of Factory Default Software - Recovery complete
Recovering without changing the internal storage drive partitions
Recovering without changing the internal storage drive partitions
deletes all information stored on the C: drive. Be sure to save your
work to external media before executing the recovery (see “Backing
up your work” on page 85). If you have created other partitions
(for example, a D: drive), those partitions will remain intact and any
information on them will not be affected.
During the internal storage drive recovery process it is strongly
recommended that your computer be connected to an external power
source via the AC adaptor.
You can recover the C: drive without affecting other partitions by
either using the utilities stored on your computer’s internal storage
drive or by using recovery media, if you have created such media.
To recover using the first method, follow the procedure below. To
recover using the second method, see “Restoring from recovery
media” on page 67.
NOTE