Satellite 2410/2415 Series User’s Guide ® If you need assistance: InTouch® Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see Chapter 9 on page 214 in this guide. TOSHIBA C6641-1202M1 5.375 x 8.375 ver 2.4.
Model: Satellite® 2410/2415 Series Compact Disk-ReWritable The computer system you purchased may include a Compact DiskReWritable (CD-RW), one of the most advanced storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed. If you fail to do so, this product may not function properly and you may lose data or suffer other damage.
ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. FCC Requirements The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems.
company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service. If Problems Arise If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they will notify you in advance of this disconnection.
aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Toshiba believes Wireless LAN is safe for use by consumers.
Pour empêcher que cet appareil cause du brouillage au service faisant l'object d'une licence, il doit être utilisé à l 'interieur et devrait être placé loin des fenêtres afin de fournir un écran de blidage maximal. Si le matérial (ou son antenne d 'émission) est installé à l ' exterieur, il doit faire l'object d' une licence. USA-Federal Communications Commission (FCC) This device complies with Part 15 of FCC Rules.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: ❖ Reorient or relocate the receiving antenna. ❖ Increase the distance between the equipment and the receiver.
Caution: Bluetooth and Exposure to Radio Frequency Radiation The radiated output power of the BluetoothTM Card from Toshiba is far below FCC radio frequency exposure limits. Nevertheless, the Bluetooth card shall be used in such a manner that the potential for human contact during normal operation is minimized.
CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep it for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Trademarks Satellite, Noteworthy, SelectServ, InTouch, and Fn-esse are registered trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. WinDVD is a trademark of InterVideo, Inc.
Contents Introduction ..............................................................22 This guide .............................................................. 22 Safety icons ........................................................... 23 Other icons used.............................................. 24 Other documentation ............................................. 24 Service options ...................................................... 25 Chapter 1: Finding Your Way Around ........................
Contents Creating a computer-friendly environment....... 38 Keeping yourself comfortable .......................... 39 Precautions...................................................... 42 Setting up your computer ...................................... 43 Setting up your software.................................. 44 Registering your computer with Toshiba ......... 45 Adding external devices ................................... 45 Installing additional memory (optional) .................
Contents 15 Caring for your computer....................................... 72 Cleaning the computer ..................................... 73 Moving the computer....................................... 73 Using a computer lock ..................................... 73 Chapter 3: Learning the Basics.................................. 75 Computing tips ...................................................... 75 Using the keyboard ................................................ 76 Character keys ...............
Contents Setting up for communications.............................. 97 Connecting the modem.................................... 97 Connecting your computer to a network .......... 98 Powering down the computer ................................ 99 Turn Off or Shut down command..................... 99 Restart command .......................................... 100 Hibernation command ................................... 100 Standby command.........................................
Contents 17 Setting battery alarms.................................... 125 Changing the main battery ................................... 126 Removing the battery from the computer ...... 126 Removing the battery from the battery cover. 127 Inserting a charged battery ............................ 128 Disposing of used batteries safely ....................... 129 Traveling tips........................................................ 130 Chapter 5: Getting to Know the Windows® XP Operating System ..........
Contents Using the Windows® XP tour ......................... 160 Lesson 15: Turning off your computer................. 161 Chapter 6: Exploring Your Options.......................... 162 Windows® XP special features ............................. 162 Personalizing your desktop.................................. 163 Customizing the taskbar ................................ 163 Changing desktop and browsing style ........... 164 Personalizing individual windows ..................
Contents 19 Recording sounds.......................................... 179 Using a microphone....................................... 179 Adjusting recording quality ............................ 180 Using external speakers or headphones......... 181 Using PC Cards.................................................... 182 PC Card supporting software ......................... 182 Inserting PC Cards ......................................... 183 Removing PC Cards .......................................
Contents Using playlists ..................................................... 209 Creating a Playlist .......................................... 210 Playing a Playlist............................................ 211 Getting Help ......................................................... 213 Exiting WinDVD ................................................... 213 Chapter 9: If Something Goes Wrong ..................... 214 Problems that are easy to fix ...............................
Contents 21 Appendix A: Hot Keys.............................................. 244 Volume Mute........................................................ 244 Instant password security.................................... 245 Without a password ....................................... 245 With a password ............................................ 245 Maintaining security when the battery isn’t fully charged ........ 246 Power usage mode .............................................. 247 Standby mode..........
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your access to information can accompany you wherever you go. You will find that your Microsoft® Windows® XP Home or XP Professional operating system is already installed on your computer. It offers exciting features and easy Internet access. This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end.
Introduction Safety icons 23 Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Introduction Other documentation Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon highlights technical information about the computer. HINT: This icon denotes helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text. Other documentation In addition to this user’s guide, your computer comes with the following documentation: ❖ This electronic version of the user’s guide.
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ® warranty programs. For more information, visit Toshiba's Web site at toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 214. 5.375 x 8.375 ver 2.4.
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything. If any items are missing or damaged, notify your dealer immediately. For additional help, see “If you need further assistance” on page 238. 26 5.375 x 8.375 ver 2.4.
Finding Your Way Around Front with the display closed 27 Front with the display closed System indicator panel Volume control dial Display latch CD/DVD control buttons Microphone in jack Headphone out The lights on the system indicator panel provide information about various system functions. For a description, see “System indicator panel” on page 34. The volume control dial lets you adjust the loudness of the system speakers. The 3.
Finding Your Way Around Back Back DC-IN LAN port USB Video out ports Parallel port Modem port RGB (monitor) port The DC-IN is where you plug in the AC adapter. Ether The LAN port lets you connect the computer to a local area network using an Ethernet link. The USB (Universal Serial Bus) ports allow you to connect USB peripherals to your computer.
Finding Your Way Around Right side 29 Right side Diskette drive eject button DVD-ROM or multi-function drive (Sample Drive) DVD-ROM or multi-function drive LED Diskette drive LED Diskette drive Wireless antenna LED* Manual eject Security button lock slot Eject button Wireless antenna on-off switch* (*only functional for systems with Wi-FiTM) The diskette drive LED (light-emitting diode) flashes when the diskette drive is in use. The diskette drive allows diskettes to be accessed.
Finding Your Way Around Left side The manual eject button enables you to open the drive tray when the computer is off. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip. The security lock slot allows you to attach an optional PORT- Noteworthy® computer lock cable to your computer for securing it to a large, heavy object such as your desk.
Finding Your Way Around Front with the display open The battery release latch secures the battery cover to the computer, preventing the battery from dislodging from the computer case.
Finding Your Way Around Front with the display open The stereo speakers let you hear sounds, such as system alarms associated with your software, and music from DVDROMs and audio CDs. The function keys, when used with the Fn key, activate several different system functions. For more information, see “Hot Keys” on page 244. The TouchPadTM enables you to move the cursor with the stroke of a finger. For more information, see “Using the TouchPad” on page 65.
Finding Your Way Around Front with the display open 33 The front panel provides a palm rest to assist you in maintaining proper posture while using the computer. The 85-key keyboard provides all the functionality of a fullsize keyboard. For more information, see “Using the keyboard” on page 76. The keyboard indicator lights provide information about various keyboard functions. For details, see “Keyboard indicator lights” on page 33. The TOSHIBA Console button allows quick access to various functions.
Finding Your Way Around Front with the display open types the number printed on the front of the key instead of typing the letter printed on the top of the key. The caps lock light glows when the caps lock function is on. For more information, see “Overlay keys” on page 78. System indicator panel On/off light Battery light AC power light Hard disk drive light Disk/ disc activity light The AC power light glows green when the computer is connected to an external power source.
Finding Your Way Around Front with the display open 35 The disk/disc activity light flashes green when the diskette drive, the DVD-ROM or the multi-function drive is being accessed. CAUTION: Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data. CD/DVD control buttons The control buttons on the front of the computer are for playing CDs, DVDs and digital audio files. You can play audio CDs while the computer is turned off.
Finding Your Way Around Underside The next track button causes the disc player to skip to the following track on the disc. NOTE: If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD.
Finding Your Way Around Underside 37 The battery release latch secures the battery cover to the computer, preventing the battery from dislodging from the computer case. The battery cover provides access to the battery module, which lets you use your computer when a standard electrical outlet is not available. For information about replacing the battery, see “Changing the main battery” on page 126. The hard disk drive cover protects the computer’s hard disk drive. 5.375 x 8.375 ver 2.4.
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you need to use, such as a printer.
Getting Started Selecting a place to work 39 ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change, such as air conditioner vents or heaters. ❖ Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals.
Getting Started Selecting a place to work ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly. Proper seating is a primary factor in reducing work strain. Some people find a backless chair more comfortable than a conventional chair.
Getting Started Selecting a place to work 41 ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖ Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work. Do not slump forward or lean back too far.
Getting Started Selecting a place to work Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖ Take frequent breaks to change position, stretch your muscles, and relieve your eyes. A break of two or three minutes every half-hour is more effective than a long break after several hours.
Getting Started Setting up your computer ❖ 43 Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation. Be careful when you remove a PC Card that has been used for a long period. ❖ Avoid spilling liquids into the computer’s keyboard. If you do spill a liquid that gets into the keyboard, turn off the computer immediately.
Getting Started Setting up your computer To use external power or to charge the battery, you must attach the AC adapter. See “Connecting to a power source” on page 58. Setting up your software NOTE: The names of windows displayed and the order in which windows appear may vary depending on your software setup choices. The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 From the welcome screen, click Next to enter the Setup Wizard.
Getting Started Setting up your computer 5 45 Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. 6 Enter your personal information in the registration window. 7 Click Finish to complete the process. Your computer restarts automatically.
Getting Started Installing additional memory (optional) ❖ Connect a full-size keyboard (see “Using an external keyboard” on page 57) ❖ Connect an external monitor (see “Using external display devices” on page 54) ❖ Connect a local printer (see “Connecting a printer” on page 53) ❖ Install PC Cards (see “Using PC Cards” on page 182) Installing additional memory (optional) CAUTION: Before you install or remove a memory module, turn off the computer using the Start menu.
Getting Started Installing additional memory (optional) 47 CAUTION: Do not try to install a memory module under the following conditions. You can damage the computer and the module. 1. The computer is turned on. 2. The computer was shut down using Standby mode. 3. Power to the DVD-ROM or multi-function drive has been turned on. CAUTION: Do not install or remove a memory module while the DVD-ROM or multi-function drive power is on. 1 If the computer is on, turn it off.
Getting Started Installing additional memory (optional) Expansion memory slot cover Underside of the computer NOTE: Use a point size 0 Phillips screwdriver. 4 Locate the expansion memory slot cover and remove the screw that secures the cover. Removing the expansion memory slot cover screw 5.375 x 8.375 ver 2.4.
Getting Started Installing additional memory (optional) 49 5 Using your finger or a narrow object, lift off the cover. 6 Put the screw and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Getting Started Installing additional memory (optional) Inserting the memory module CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 10 Replace the memory slot cover. 11 Replace the screw and tighten it. 12 Turn the computer over and reconnect any cables you removed. You can now continue setting up the computer.
Getting Started Installing additional memory (optional) 51 Removing a memory module CAUTION: If you use the computer for a long time, the memory modules will become hot. If this happens, let the modules cool to room temperature before you replace them. 1 Follow steps 1 through 6 in “Installing additional memory (optional)” on page 46. CAUTIONS: Do not try to remove a memory module with the computer turned on. You can damage the computer and the device.
Getting Started Installing additional memory (optional) Removing the memory module 3 Gently pull the module out. CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 4 Complete the procedure by following steps 10 through 12 in “Installing additional memory (optional)” on page 46. Checking total memory When you add or remove memory, you can check that the computer has recognized the change.
Getting Started Connecting a mouse 53 properly, as described in steps 8 and 9 of “Installing additional memory (optional)” on page 46. Connecting a mouse You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. To connect a mouse, plug the mouse cable into one of the computer’s USB ports. You can connect it after you turn on the computer. The operating system automatically detects the mouse. The mouse and TouchPad can be used at the same time.
Getting Started Using external display devices Connect a parallel printer before you turn on the computer. NOTE: Follow the manufacturer’s instructions for connecting a parallel printer to your computer. Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor or television to your computer if you need a larger screen.
Getting Started Using external display devices 55 Directing the display output when you turn on the computer Once you’ve connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5). 1 While holding down Fn, press F5 repeatedly until the setting you want takes effect.
Getting Started Using external display devices documentation supplied with the device for additional configuration steps. TECHNICAL NOTE: In order to use the simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 640 X 480 or higher. Display limitations Keep in mind that the quality of the display will be limited to the capabilities of the external video device.
Getting Started Connecting an external diskette drive 57 Connecting an external diskette drive Although your computer has an internal diskette drive, you can attach an external USB diskette drive to use diskettes with your computer. These drives hold 3.5-inch diskettes. Sample external USB diskette drive To connect an external USB diskette drive, connect the drive’s cable to one of the computer’s USB ports. For more information about diskettes, see “Using diskettes” on page 83.
Getting Started Connecting to a power source Connecting to a power source Your computer requires power to operate. Use the power cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. Power cable AC adapter Power cable and AC adapter CAUTION: Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer.
Getting Started Connecting to a power source 59 Connecting the power cable to the AC adapter 2 Plug the AC adapter into the DC-IN on the back of the computer. Connecting the AC adapter to the computer 3 Connect the power cable to a live electrical outlet. If the electrical outlet is live, the system indicator panel’s AC power light ( ) glows green. 5.375 x 8.375 ver 2.4.
Getting Started Charging the battery DANGER: Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use. There is a risk of electric shock. Never remove the power plug from the outlet with wet hands. Doing so may cause an electric shock. Charging the battery Before you can use the battery to power the computer, you must charge it.
Getting Started Using the computer for the first time 61 Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel. Lift Slide Opening the display panel CAUTION: To avoid damaging the display panel, don’t force it beyond the point where it moves easily. Never lift or move the computer using the display panel. Turning on the power On 1 Check that all the drives are empty.
Getting Started Using the computer for the first time Pressing the power button NOTE: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely. The AC power light on your computer will glow when the computer is connected to an external power source. The battery light: ❖ Glows amber while the battery is being charged. ❖ Glows green when the battery is fully charged.
Getting Started Using the computer for the first time 63 Activating the power-on password When you first turn on your computer, no password is required. But you can set up your computer so that a password is required to complete the powering up process in the future. To activate the power-on password: 1 Press the TOSHIBA Console button. The TOSHIBA Console window appears. For more information see “TOSHIBA Console” on page 192. 2 Click Security. 3 Click User password.
Getting Started Using the computer for the first time Important information on your computer’s built-in LCD sensor Your computer has a built-in LCD (liquid crystal display) sensor located near the left-hand corner of the palm rest. When the computer is on, the LCD sensor detects when the display panel is closed. Built-in LCD sensor Your computer’s Power Saver default setting when the display panel is closed is Hibernation mode.
Getting Started Using the computer for the first time 65 your computer to go into Hibernation mode even if your display panel is open. NOTE: To start the computer again from Hibernation mode, move the magnetic object away from the computer, then see “Starting again from Hibernation” on page 111. If your computer is set for “no action” when the display panel is closed, a magnetic object in the area of the front-left corner of the computer can cause the display panel screen to go blank.
Getting Started Using the computer for the first time Once you’ve positioned your cursor, you can select an object on the display screen by double-tapping the TouchPad or clicking the control buttons. For more on the TouchPad, see “Lesson 2: Using the TouchPad and control buttons together” on page 135. You can disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 66.
Getting Started Using the computer for the first time 67 Sample Mouse Properties window 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 251. 5.375 x 8.375 ver 2.4.
Getting Started Using the computer for the first time Setting up a printer NOTE: Follow the manufacturer’s instructions for connecting a printer to your computer. If your printer has not been detected automatically when connected to the computer, you must install the printer driver for the model of printer that is connected to your computer. You install the printer driver either by following the instructions indicated in your printer guide, or by using the operating system’s Add Printer Wizard.
Getting Started Using the computer for the first time Sample Control Panel 2 Click Printers and Other Hardware. 3 Click the Printers and Faxes icon. The Printers and Faxes window appears. Sample Printers and Faxes window 5.375 x 8.375 ver 2.4.
Getting Started Setting up the fax function 4 Click Add a printer. The Add Printer Wizard window appears. Sample Add Printer Wizard 5 Follow the on-screen instructions. HINT: If you are using more than one printer, make sure the name is descriptive enough to help you tell the difference. Setting up the fax function To set up the fax capability: 1 Click Start, Printers and Faxes. The Printers and Faxes window appears. 5.375 x 8.375 ver 2.4.
Getting Started Setting up the fax function 2 Click the Set up faxing option. 3 Follow the on-screen instructions. 71 The fax function default setting is enabled. If it is disabled, enable the fax function by doing the following: 1 Click Start, Printers and Faxes. 2 Right-click the fax icon. 3 Click Properties from the drop-down menu. 4 Click the Devices tab. 5 Click Properties. 6 Click the Receive tab. 7 Click Enable device to receive.
Getting Started Powering off the computer Powering off the computer It’s a good idea to power off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery. When the main battery light glows green, the battery is fully charged.
Getting Started Caring for your computer 73 Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer or network administrator for suggestions for appropriate cleaning products. CAUTION: Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer.
Getting Started Caring for your computer PORT-Noteworthy computer lock cable To secure the computer: 1 Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2 Pass the locking end through the loop. 3 Insert the cable’s locking end into the security lock slot located on the right side of the computer, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter computer theft.
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working. Your computer can be configured to warn you when the battery is running low.
Learning the Basics Using the keyboard ❖ Back up your files to diskettes (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy. ❖ Use Disk Defragmenter to conserve disk space and help your computer perform at its optimal level.
Learning the Basics Using the keyboard 77 Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable. ❖ The uppercase letter O and the number 0 are not interchangeable. ❖ The Caps Lock key changes only the alphabet keys to upper case — the number and symbol keys are not affected.
Learning the Basics Using the keyboard Windows® special keys Application key ® Windows logo key Windows® special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows® logo key opens the Start menu. ❖ The Application key has the same function as the secondary (or right mouse) control button. Overlay keys & ∗ ( ) 7 8 9 0 Home 7 PgUp 9 8 U I 4 O 5 J P - 6 K End 1 ∗ : ; L 2 PgDn 3 > M . Ins 0 Del .
Learning the Basics Using the keyboard 79 Using the numeric keypad overlay To turn on the numeric keypad overlay, press Fn and F11 simultaneously. The numeric mode keyboard indicator light glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖ For lowercase letters, hold down Fn while you type the letters. ❖ For uppercase letters, hold down both Fn and Shift while you type the letters.
Learning the Basics Emulating a full-size keyboard Emulating a full-size keyboard Although the computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. Pressing the Fn key simultaneously in combination with one of the specially marked keys allows you to emulate a full-size keyboard. For further information and instructions, see “Assigning a key to a program or document” on page 189. NOTE: The Fn emulation key is not supported when using a USB keyboard.
Learning the Basics Starting a program 81 For information on how to program the button, see “TOSHIBA Console” on page 192. Starting a program The easiest way to start a program is to click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows® Explorer.
Learning the Basics Printing your work To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name. Printing your work Verify that the operating system is set up for your printer as described in “Setting up a printer” on page 68.
Learning the Basics Using diskettes 83 Sample Print window 3 Click OK or Print to print. Using diskettes The 3.5-inch internal or external diskette drive lets you use high-density (1.44 MB) diskettes for data transfer and storage. Diskette drive LED Eject button Sample diskette drive The diskette drive LED flashes while the drive is being accessed. 5.375 x 8.375 ver 2.4.
Learning the Basics Using diskettes Inserting and removing diskettes 1 Hold the diskette so that the arrow on its upper surface points toward the drive. 2 Push the diskette gently into the drive slot. When the diskette is in place, the eject button pops out. To release a diskette from the drive, push the eject button. CAUTION: Never press the eject button or turn off the computer while the diskette drive LED is flashing. Doing so could destroy data and damage the diskette or the drive.
Learning the Basics Backing up your files 85 ❖ Never eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’s surface. ❖ Keep your diskettes away from sources of magnetism, such as speakers and radios, since these can destroy data. Backing up your files Backing up your files means copying individual files to a diskette or copying entire sections of your hard disk to another device, such as a tape drive, or to your network partition.
Learning the Basics Playing a CD or DVD 7 Click the icon for the diskette drive (3 1/2 floppy [A:]). HINT: You can also back up a file to a diskette by clicking the file (or files) you want to backup with the secondary button, then pointing to Send To and clicking 3 1/2 Floppy (A:). Playing a CD or DVD Your computer may have a DVD-ROM or multi-function drive that can read both DVD-ROM and CD-ROM discs.
Learning the Basics Playing a CD or DVD 87 Drive components and control buttons The CD/DVD control buttons are located at the front edge of the computer and can be accessed when the display panel is closed or open. Components DVD-ROM or multi-function drive (Sample Drive) Eject button Manual eject button Sample DVD-ROM or multi-function drive Use the eject button to open the disc tray. This button requires power to operate.
Learning the Basics Playing a CD or DVD The manual eject button allows you to manually open the disc tray when power to the computer and the drive is off. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip. HINT: When the computer is off and the DVD-ROM or multi-function drive is on, press the stop/eject control button to eject a disc.
Learning the Basics Playing a CD or DVD 89 The next track button skips to the following track on the disc. You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on. NOTE: If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD.
Learning the Basics Playing a CD or DVD CAUTION: Do not install or remove a memory module while the DVD-ROM or multi-function drive power is on. Inserting a disc WARNING: Before playing an audio CD or a DVD, turn the volume down. Playing the disc at maximum volume could damage your ears. To turn the volume down, use the volume control dial or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Learning the Basics Playing a CD or DVD 3 91 Hold the disc by its edges and check that it is clean and free of dust. CAUTION: Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data. 4 Carefully place the disc in the empty tray with its label facing up. Inserting a disc CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it.
Learning the Basics Playing a CD or DVD 5 Gently press the center of the disc onto the spindle until it locks into place. Spindle Correct position Disc Incorrect position Incorrect position Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray. 6 Close the disc tray by pressing gently on the center of the tray until it clicks, indicating that it is locked.
Learning the Basics Playing a CD or DVD 93 The computer automatically detects a disc in the drive and opens the Audio CD window. To play an audio CD select the Play Audio CD using Windows Media Player option and click OK. Sample Audio CD window The Windows Media Player window appears. 5.375 x 8.375 ver 2.4.
Learning the Basics Playing a CD or DVD Rewind Play Stop Previous track Next track Mute Fast forward Volume control Sample Windows MediaTM Player screen Viewing the contents of a CD or DVD CDs and DVDs contain files just like diskettes and the hard disk. CDs are often used to install software or store files that require a lot of space, such as photographs and large presentation files. You can use Explorer or My Computer to view the contents of any CD or DVD. 5.375 x 8.375 ver 2.4.
Learning the Basics Playing a CD or DVD 95 Removing a disc with the computer on CAUTION: Never press the eject button while the computer is accessing the drive. Wait for the disk/disc activity light on the system indicator panel to turn off before opening the disc tray. 1 Locate and press the eject button. The disc tray partially opens. 2 Grasp the sides of the disc tray and pull it fully open. 3 Remove the disc from the disc tray and place it in its protective cover.
Learning the Basics Using the DVD-ROM or multi-function drive Caring for CDs and DVDs ❖ Store your discs in their original containers to protect them from scratches and keep them clean. ❖ Never bend a disc or place heavy objects on top of it. ❖ Hold a disc by its outside edge. Fingerprints on the surface of a disc can prevent the drive from reading the data properly. ❖ Avoid exposing discs to direct sunlight or extreme heat or cold.
Learning the Basics Setting up for communications 97 Setting up for communications To communicate across the telephone lines with another computer, you need: ❖ The computer’s modem ❖ A telephone line ❖ A communications program To connect to the Internet, you need a Web browser, such as Microsoft® Internet Explorer. TECHNICAL NOTE: Disable Call Waiting before you connect through the modem. Call Waiting interrupts data transmission.
Learning the Basics Setting up for communications Connecting to the modem port 2 Plug the other end of the RJ11 telephone cable into the modular jack of a standard voice-grade telephone line. Connecting your computer to a network You can connect your computer to a network locally or remotely. ❖ Locally, using the built-in Ethernet LAN adapter by connecting it to a standard RJ45 LAN line. ❖ Remotely, using the built-in modem and a dial-up connection.
Learning the Basics Powering down the computer 99 Powering down the computer When you power down the computer, you have a number of options to choose from: ❖ Turn Off or Shut down, which power off the computer ❖ Hibernation, which saves the current operating state to the hard disk and powers off the computer ❖ Standby, which saves the current operating state to memory and enters a low power mode ❖ Restart, which restarts the computer Each option has its advantages.
❖ Learning the Basics Powering down the computer When starting up again, the system does not automatically open the programs and files you were previously using. Restart command Restart is the same as Turn Off or Shut down but automatically powers up the computer. Use it when you need to reload the operating system, for example to activate changes to system settings.
Learning the Basics Using Turn Off or Shut down 101 Standby command The Standby command puts the computer into a powersaving mode. Standby stores the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖ While in Standby mode, the computer uses some battery power. If your computer is left in Standby mode for an extended period, your computer could lose data.
Learning the Basics Using Turn Off or Shut down Sample Turn off computer window 2 Click Turn Off. The computer turns itself off. If you are using the Windows® XP Pro operating system and are a member of a domain, power off the computer as follows: 1 Click the Start button, then Shut down. The Shut Down window appears. Sample Shut down computer window 2 Select Shut down from the drop-down list. 3 Click OK. The computer turns itself off. 5.375 x 8.375 ver 2.4.
Learning the Basics Using Turn Off or Shut down 103 Turning off or shutting down more quickly In addition to the method described above, you can turn off or shut down the computer by pressing the power button. To do so, you must preset the mode. 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Performance and Maintenance. 3 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears.
Learning the Basics Using Turn Off or Shut down 4 Select the listed power option you desire—for example, Normal in the “Running on batteries” section. 5 Click Details in the same section as the power option you selected. If you selected Normal, you would click Details in the “Running on batteries” section. The properties window for the option you selected appears. If you selected the Normal option, the Normal Properties window appears.
Learning the Basics Using Hibernation ❖ 105 When I close the lid Set this option to Power Off if you want the computer to turn off when you close the display panel. 8 Click Override all Modes with settings here. The Set the range window appears. Sample Set the range window with DC only option 9 Do one of the following: ❖ Click DC only if you want the settings to apply only when you are using battery power. ❖ Click All for the settings to apply whether you are using battery power or outlet power.
Learning the Basics Using Hibernation Enabling the Hibernation command Hibernation enabled is a default setting. If it should become disabled, you can enable it as follows: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Performance and Maintenance. 3 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button.
Learning the Basics Using Hibernation 107 4 Click the Hibernate tab, then click the Enable hibernate support check box. 5 Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Going into Hibernation mode If you are using the Windows® XP Home operating system, or are using the Windows® XP Pro operating system and are not a member of a domain, power off the computer using the Hibernation command as follows: 1 Click Start, Turn off computer.
Learning the Basics Using Hibernation Sample Hibernate computer window 2 Select Hibernate from the drop-down list of options. 3 Click OK. The computer saves the state of the system, including all open programs and files, to the hard disk. Then the computer turns itself off.
Learning the Basics Using Hibernation 3 109 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See “TOSHIBA Console” on page 192 or “Power Management” on page 194. Sample TOSHIBA Power Saver Properties window 4 In the Running on batteries area, click the Details button. 5 Click the System Power Mode tab. 5.375 x 8.375 ver 2.4.
Learning the Basics Using Hibernation Sample Normal Power Properties window 6 Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button. ❖ When I close the lid Set this option to Hibernation so that the computer will go into Hibernation mode when you close the display panel. 5.375 x 8.375 ver 2.4.
Learning the Basics Using Hibernation 7 111 Click Override all Modes with settings here. The Set the range window appears. Sample Set the range window with DC only option 8 9 Do one of the following: ❖ Click DC only if you want the settings to apply only when you are using battery power. ❖ Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Normal Power Properties window.
Learning the Basics Using Standby Using Standby If you are using the Windows® XP Home operating system, or are using the Windows® XP Pro operating system and are not a member of a domain, power off the computer using the Standby command as follows: 1 Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window 2 Click Stand By. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode.
Learning the Basics Using Standby 113 Sample Stand by computer window 2 Select Stand by from the drop-down list of options. 3 Click OK. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light blinks amber to indicate the machine is in Standby mode. NOTE: If you power down using the Standby command and the battery discharges fully, your information will be lost. Be sure to save your work often.
Learning the Basics Using Standby 2 Click Performance and Maintenance. 3 Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See “TOSHIBA Console” on page 192 or “Power Management” on page 194. Sample TOSHIBA Power Saver Properties window 4 Click Details in the Running on batteries section. The Normal Power Properties window appears.
Learning the Basics Using Standby 115 Sample Normal Power Properties window 6 Select Standby for the options you want. ❖ When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby so that the computer will go into Standby mode when you close the display panel. 5.375 x 8.375 ver 2.4.
7 Learning the Basics Using Standby Click Override all Modes with settings here. The Set the range window appears. Sample Set the range window with DC only option 8 9 Do one of the following: ❖ Click DC only for the settings to apply only when you are using battery power. ❖ Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Normal Power Properties window.
Chapter 4 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba's energy-saver design Your computer enters a low-power mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power varies depending on usage. The battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer or visit the Toshiba Web site at toshiba.com.
Mobile Computing Running the computer on battery power 119 ❖ Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it. ❖ Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. ❖ Do not incinerate a spent battery, as this could cause it to explode and release toxic materials.
Mobile Computing Running the computer on battery power 3 Operate the computer on battery power for five minutes. If the battery has at least five minutes of operating time, continue operating until the battery is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adapter to the computer and the power cable to a power outlet.
Mobile Computing Charging batteries 121 Charging batteries The main battery needs to be charged before you can use it to power the computer. You can charge the battery using your computer, or you can use an optional battery charger. CAUTION: Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer.
Mobile Computing Monitoring battery power Charging the RTC battery The computer contains an internal battery that provides power for the real-time clock (RTC) and calendar. During normal use, the main battery keeps the RTC battery adequately charged. Occasionally, the RTC battery may lose its charge completely, especially if you have had the computer turned off for a long time. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working.
Mobile Computing Monitoring battery power 123 Determining remaining battery power NOTE: Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. 1 Click Start, then click Control Panel. The Control Panel opens. 2 Click Performance and Maintenance. 3 Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears.
Mobile Computing Monitoring battery power Conserving battery power How long a fully charged battery lasts when you are using the computer depends on a number of factors, such as: ❖ How the computer is configured ❖ How much you use the display panel instead of an external monitor ❖ How much you use the hard disk and other drives ❖ Whether you use any optional devices to which the battery supplies power, such as a PC Card ❖ Where you are working—since operating time decreases at low temperature
Mobile Computing Monitoring battery power 125 you turn on the power again, you can continue where you left off. The computer stores the information on what you were doing until the battery runs out of power. If you have Hibernation mode enabled (the default), the computer copies the details of your open programs and files to the hard disk before shutting down. Setting battery alarms Your computer can be configured to warn you when the battery is running low. You can set multiple alarms.
Mobile Computing Changing the main battery Changing the main battery When your battery power is running low, you have two options: connect the computer to an AC power source or install a charged battery. NOTE: If your battery discharges fully, your information will be lost. Be sure to save your work often. CAUTION: When handling a battery, be careful not to drop it or short-circuit its terminals. Also, do not drop, hit or otherwise impact the battery.
Mobile Computing Changing the main battery 127 Sliding the battery release latch 5 Slide the battery release latch toward the front of the computer. Slide the battery cover toward the edge of the computer until it won’t go any further. 6 Lift the cover straight up from the slot. WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries safely” on page 129.
Mobile Computing Changing the main battery Battery cover latch Tab Tab Battery cover latch Removing the battery from the battery cover 3 Lift the battery from the battery cover. Inserting a charged battery 1 Turn off the computer. See “Turn Off or Shut down command” on page 99. 2 Remove the battery. See “Removing the battery from the computer” on page 126. 3 Release the battery from the battery cover. See “Removing the battery from the battery cover” on page 127.
Mobile Computing Disposing of used batteries safely 129 recessed areas, the battery cover will slip comfortably into the battery slot. 8 Once the battery cover has been inserted, slide the battery cover until the side of the battery release latch matches the side of the computer. 9 Slide the battery release latch toward the back of the computer. You may need to press the cover in from the edge slightly to return the latch to the closed position.
Mobile Computing Traveling tips You must discard a battery if it becomes damaged. CAUTION: The computer’s main battery is a lithium ion (Li-ion) battery, which can explode if not properly replaced, used, handled, or disposed of. Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba.
Chapter 5 Getting to Know the Windows® XP Operating System This chapter introduces the Windows® XP operating system by guiding you through a few basic tasks. Whether you have used a Windows® operating system or not, the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons. As you explore the Windows® XP operating system further, you will often discover alternative ways of accomplishing a particular task.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks. Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, System tray, and background pattern.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop 133 Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area. Among the icons on your desktop are the following: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop ❖ Adjust system settings ❖ Search for files ❖ Access Windows® Help and Support ❖ Suspend system activity and turn off the computer For more information on starting programs, see “Lesson 6: Starting programs” on page 143. Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together 135 the files and folders reside in your computer on a storage device, such as a disk drive. You can think of your computer storage system in terms of office equipment. You have a file cabinet (device), that contains folders, and each folder may contain documents. Your office may have more than one file cabinet, just as your computer may have more than one disk drive.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together left button) of the adjoining control buttons to open the Start menu. NOTE: In this guide, the term “click” refers to the primary button, which is usually the left one. Instructions requiring the secondary button specifically mention that button. For example, “click the secondary button.” 2 Click an empty area of the desktop to close the Start menu.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together 137 Sample My Computer window open 6 Now click the Close button in the upper-right corner of this window. The My Computer window is closed. 7 Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the TouchPad to drag the cursor to the right edge of the desktop, then release the primary button.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Start button Taskbar System tray Sample desktop with the taskbar on the right HINT: You can move the taskbar to any of the desktop’s four edges. 8 Click the taskbar once again and drag it back to the bottom of the desktop. If you can’t move the taskbar, it’s probably because it has been locked. 5.375 x 8.375 ver 2.4.
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet 139 To unlock it: 1 Right-click the taskbar. A menu appears. If the Lock the taskbar option has a check mark, then the feature is in use. 2 Click Lock the taskbar. 3 Call up the menu again. The check mark should be gone, indicating the lock has been removed. Follow the same steps to lock the taskbar. You can also lock and unlock the taskbar by using the Taskbar and Start Menu Properties window.
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document 2 On the View menu, point to Toolbars, then click Address Bar. The operating system displays the address bar. It indicates that you are in “My Computer.” Sample My Computer window Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. 1 Move the cursor to an empty area of the desktop, then click the secondary button.
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document 4 141 Double-click the My New Doc icon. The operating system opens the new document in Notepad—the text editor built into the operating system. Sample Notepad window Notice that when the document opens, there is a new button on the taskbar that reads My New Doc.txtNotepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is analogous to a file folder stored in a file cabinet. In this case, a disk drive in the computer is the file cabinet. The operating system stores documents and programs in folders. It even stores other folders in folders.
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs 7 143 Close the window by clicking its Close button and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task. This lesson teaches you how to launch programs from the Start menu, using two of the programs that are built into the operating system: Paint and Windows® Explorer. 1 Click Start, then All Programs.
3 Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs To open the second program: ❖ Click Start, then click All Programs. ❖ Point to Accessories, then click Windows Explorer. The operating system opens Windows® Explorer, which provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows 145 Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning them so that you can see more than one window at a time. You can also hide windows by removing them from the desktop without actually closing your document or program.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the applications’ button on the taskbar through use of the TouchPad and clicking the secondary button.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows 147 The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed. It is now called the Restore Down button. HINT: Maximizing a program is a good way to work when you are only using that program and do not want any distractions on the screen.
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs Now that the windows are side by side, you can see how you could refer to one window while working in the other. Resizing and moving windows allows you to rearrange the desktop to suit your needs. Experiment with different sizes and placements of windows to find the best arrangement for your work. At this point you have two programs open on the desktop. The next lesson shows you how to close them.
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts 149 Lesson 9: Creating shortcuts By adding shortcuts to your desktop, you can open programs or files with the click of a button. You will probably want to create shortcuts for the programs you use most frequently. This lesson explains how to create shortcuts using two operating system accessories, Calculator and Character Map, as examples.
4 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Type Calculator and click Finish. The operating system displays the new shortcut on your desktop. Creating a shortcut to the Character Map Use this method when you don’t know the name and location of the program file. 1 Click Start, then click Search. Sample Search option on the Start menu The operating system displays the Search Results window. 5.375 x 8.375 ver 2.4.
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts 151 Sample Search Results window HINT: Search also allows you to perform searches on the Internet. 2 Click All files and folders. 3 Type char in the text box labeled: In all or part of the file name. The operating system displays a list of all the files with “char” in their names. 4 Click the Character Map file with the secondary button and drag and drop it on the desktop.
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver A shortcut to the Character Map appears on your desktop. NOTE: Shortcut icons can be recognized by an arrow in the lowerleft corner. Deleting or changing the shortcut icons will not affect the program to which they refer. Clicking a shortcut icon opens the program or folder immediately. You can place as many shortcuts on your desktop as you find useful.
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver 2 153 Click Properties. The operating system displays the Display Properties window. Sample Display Properties window 3 Click the Screen Saver tab. 4 Click the arrow beside the current option—probably “(None)” —to open the screen saver list box. 5 Scroll through the screen saver options by clicking the scroll arrows in the list box. 6 Try a screen saver pattern by clicking a name in the list box.
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time You can view any object’s properties by clicking the object with the secondary button, then choosing Properties from the shortcut menu that appears. The next lesson explains how to set two other properties—the date and time. Lesson 11: Setting the date and time You initially set the computer’s date and time properties when you turned the computer on for the first time and set up the operating system.
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop 155 Sample Date and Time Properties window HINT: To open the Date and Time Properties window more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date/Time, or double-click the time display. 5 Click the Date & Time tab and set the correct month, year, day, and time. 6 Click the Time Zone tab and drop-down list box, and set your time zone. 7 Click OK.
1 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Click the New Folder icon you created, drag it until it is over the Recycle Bin icon and it changes color, then release the primary button. The icon disappears, but it has not really gone. It is merely set aside in the Recycle Bin so that you can restore or delete it later. 2 Repeat step 1 for any other icons you created during this tutorial. Each icon disappears as you drop it on the Recycle Bin.
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore 157 Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs. Still, the process is the same. Just drag an object’s icon to the Recycle Bin. If you change your mind and want to restore an object you sent to the Recycle Bin, select the object with the secondary button and click Restore.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? Sample System Restore welcome screen ® The Windows XP operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This teaches you how to use some of the Help features in the ® Windows XP operating system.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? 2 159 If you do not see the index, click index. Help and Support displays the Index. Sample Help and Support Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index. 3 Type drawing in the text box. Notice as you type that the index moves to locate what you typed. 5.375 x 8.375 ver 2.4.
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? Sample help window for drawings Notice that under the category drawings, there is a subcategory: creating using Paint. 4 Highlight creating using Paint, then click Display. Help opens a topic screen that, in the window’s right pane, gives a brief description of Paint and provides different ways for accessing the program, including through use of a hot link (Paint).
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer 161 To start the tour: 1 Click Start, then click Tour Windows XP The Windows XP Tour window appears. 2 Follow the instructions. Sample Windows XP Tour window Lesson 15: Turning off your computer It is very important that you let the operating system turn off your computer.
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer.
Exploring Your Options Personalizing your desktop 163 Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work.
Exploring Your Options Personalizing your desktop Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server. You can arrange that: ❖ Items that normally require a double-click will open with a single click. ❖ Folders will open in their own window instead of in the same window. ❖ Folders are accompanied by a list of common tasks instead of displayed alone.
Exploring Your Options Personalizing your desktop 165 Sample Web-style option 3 Select the preferred options. 4 Click Apply, then click OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Exploring Your Options Personalizing your desktop 3 Click the Add Web content to your desktop link. 4 Follow the on-screen instructions. Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus. You can also add these toolbars to the taskbar.
Exploring Your Options Personalizing your desktop 167 The elements you can add to the top of the window are: Toolbar element Description Address Bar Opens Web pages, programs, folders, or documents. By default, the address bar shows your current location, and whether it is a folder or a Web page. You can browse to another location by typing an address — a URL, a path, or even a program name. If you start typing a previously typed address, the AutoComplete feature finishes the address for you.
Exploring Your Options Personalizing your desktop The My Computer window appears. 2 Double-click the folder you want to open. 3 In the Tools menu, select Folder Options. The Folders Options box appears. 4 In the Tasks section, click the button for Show common tasks in folders. 5 Click Apply, then click OK. Helpful information on how to use the folders appears on one side of the window.
Exploring Your Options Using your computer at the office 169 Using your computer at the office By connecting an external monitor, external full-size keyboard and an external mouse, you can work with your notebook as if it were a standard office computer. An external monitor connects to the RGB (monitor) port. An external mouse and keyboard connect to the USB ports. In addition, you can connect your notebook to the office network. See “Connecting your computer to a network” on page 172.
Exploring Your Options Exchanging data with another computer 5 Click Next. 6 Select Connect directly to another computer. 7 Choose the appropriate role for your computer: 8 ❖ Guest ❖ Host Follow the on-screen instructions.
Exploring Your Options Exchanging data with another computer 171 The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you’re having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it. To find out which port your modem is connected to in the operating system: 1 Click Start, then click Control Panel. The Control Panel appears.
9 Exploring Your Options Exchanging data with another computer Close the Control Panel. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality. Accessing a network To access: ❖ A wired network at the office, connect an Ethernet cable to the RJ45 jack on your computer. ❖ A remote network, you need a dial-up connection.
Exploring Your Options An overview of using the Internet 173 Accessing the wireless modules using your system tray This information applies to systems with the optional Wi-Fi Mini PCI module. NOTE: To install the Wi-Fi option at a later time, contact your Toshiba Authorized Service Provider. When using your Wi-Fi Mini PCI module, your computer may display a Network Connection icon in the desktop’s system tray to indicate that it is in use. You can use the icon to turn off your Wi-Fi Mini PCI module.
Exploring Your Options An overview of using the Internet ❖ Internet features ❖ Uploading and downloading files from the Internet For more information about the Internet, see “Lesson 3: Learning about the Internet” on page 139. The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information.
Exploring Your Options An overview of using the Internet 175 Connecting to the Internet using a telephone line To connect to the Internet, you need: ❖ A modem ❖ A Web browser ❖ A telephone line ❖ An Internet Service Provider (ISP) account Once you have established an ISP account, you can access the Internet. 1 Connect your computer’s modem to a telephone line. For more information on connecting a modem, see “Connecting the modem” on page 97. 2 Start your Web browser.
Exploring Your Options An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Exploring Your Options Toshiba’s online resources 177 Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 239.
Exploring Your Options Exploring audio features page 27. Connect the red and white RCA-type connectors of the audio cable’s “Y” end to the corresponding jacks on the television. 3 Press Fn and F5 repeatedly to select the TV-only display option. Sample display options window The picture will automatically display on the TV screen. 4 If a movie is already playing, turn it off and repeat step 3.
Exploring Your Options Exploring audio features 179 CDs using the built-in speakers, headphones or external speakers. Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone in jack and using the Sound Recorder feature in the operating system. DEFINITION: A .wav (pronounced “wave”) file is the format for storing sound in files.
Exploring Your Options Exploring audio features Positioning bar Record Stop Play Skip forward Skip backward Sample Sound Recorder screen 3 Click the Record button and speak normally into the microphone. NOTE: You can only record 60 seconds at a time. 4 When you have finished recording, click the Stop button. 5 To hear what you just recorded, click the Play button. 6 To save the file, select Save from the File menu.
Exploring Your Options Exploring audio features 181 3 In the Audio Properties window, adjust the Sound Playback quality and volume, and the Sound Recording volume. 4 Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system and internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
3 Exploring Your Options Using PC Cards Adjust the volume: ❖ For external speakers, use the volume controls on each speaker. ❖ For headphones, use the computer’s volume control dial. Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard.
Exploring Your Options Using PC Cards 183 Inserting PC Cards Inserting a PC Card 1 If your PC Card does not support hot swapping, save your data and turn off the computer before inserting the PC Card. For more information, see “Hot swapping” on page 184. 2 Hold the PC Card with the arrow or main label side up and the connector side toward the slot. 3 Align the card connectors with an available PC Card slot and carefully slide the card into the slot until it locks into place.
Exploring Your Options Using PC Cards Removing PC Cards 1 Click the Safely Remove Hardware icon on the System tray. 2 Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system advises you that you may safely remove the card. 3 Press the PC Card eject button next to the PC Card slot in use. Ejecting a PC Card 4 Remove the PC Card and store it properly.
Exploring Your Options Using PC Cards 185 ❖ Never remove a network card while you are connected to a network. ❖ Never remove a SCSI card while any of the SCSI devices connected to it are operating. DEFINITION: SCSI is an acronym for Small Computer Systems Interface. A single SCSI PC Card enables you to connect several SCSI devices, such as a scanner or digital camera to your computer. Before removing a PC Card, shut it down by clicking the Safely Remove Hardware icon on the System tray.
Chapter 7 Toshiba Utilities Your computer includes several utilities designed to help you to configure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options.
Toshiba Utilities Fn-esse 187 Using Accessibility enables you to make the Fn key a sticky key, meaning you can press it once, release it and then press a function key to activate the hot key function. To open Accessibility: 1 Click Start, then click All Programs. 2 Select Toshiba Utilities, then select Accessibility. The TOSHIBA Accessibility window appears. 3 Check the Use Fn-StickyKey box. Sample TOSHIBA Accessibility window 4 Put a check mark next to the desired option.
Toshiba Utilities Fn-esse and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files. For information on creating operating system shortcuts, see “Lesson 9: Creating shortcuts” on page 149.
Toshiba Utilities Fn-esse 189 ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are dark gray. Assigning a key to a program or document There are two ways to assign a key to open a program or document: ❖ Drag-and-drop ❖ Use the keyboard or TouchPad The method most often used is drag-and-drop.
Toshiba Utilities Fn-esse Using the keyboard or TouchPad To assign a key to open a program or document: 1 Start Fn-esse. 2 Perform one of the following: ❖ Using the keyboard, press and hold the Fn key, then press the desired assignment key. ❖ Using the TouchPad, move the cursor over the desired key and press the secondary button. The Assignment Type window appears. HINT: If you are making a direct key assignment, complete step 3. If you are making a popup assignment, complete step 4.
Toshiba Utilities Hotkey utility 191 do this, refer to your operating system documentation. ❖ Click OK to associate the folder with the key you just selected. ❖ To open a popup list showing the items in that folder, press Fn plus the appropriate key. Viewing existing key assignments To view the existing key assignments, choose Assignments from the Fn-esse keyboard. Fn-esse displays the Function Key Assignments window.
Toshiba Utilities TOSHIBA Console Sample Toshiba Hotkey utility window 4 Put a check mark next to the desired option. 5 Click OK. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. You can normally access the TOSHIBA Console in two ways: ❖ Press the TOSHIBA Console button located above the F6 key on your keyboard. ❖ Use the Start menu.
Toshiba Utilities TOSHIBA Console 193 Sample TOSHIBA Console window The TOSHIBA Console offers two categories of features: ❖ Customize Your Computer ❖ Security Customize Your Computer The features available in this category are: ❖ Power Management (See “Power Management” on page 194.) ❖ TOSHIBA Button Controls (See “TOSHIBA Button Controls” on page 197.) ❖ Mouse (properties) ❖ Hotkey assignment (See “Fn-esse” on page 187.) ❖ Toshiba Hardware (See “Toshiba Hardware Setup” on page 198.) 5.
Toshiba Utilities TOSHIBA Console Security The features available in this category are: ❖ Supervisor password ❖ User password Power Management The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Console: 1 Press the TOSHIBA Console button. 2 Click the Power Management icon. The TOSHIBA Power Saver Properties window appears. 5.
Toshiba Utilities TOSHIBA Console 195 Sample TOSHIBA Power Saver Properties window The Power Save Modes tab shows the power usage modes for both AC power (“Plugged in”) and battery power (Running on batteries”). You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function.
Toshiba Utilities TOSHIBA Console The windows and settings for creating and customizing battery power modes are described in the following sections. Running on batteries section The preset modes are: ❖ Long Life ❖ Normal ❖ High Power ❖ DVD Playback ❖ Presentation Although you can change the properties for any of these modes, this is not recommended. If you need a customized mode, create a new mode with the properties you require.
Toshiba Utilities TOSHIBA Console 197 This tab enables you to choose an icon for your power usage mode, describe the mode’s characteristics and, optionally, associate it with a program. The Name field displays the name assigned to the mode in the Power Saver Properties window. You can change the name here if you wish. TOSHIBA Button Controls The TOSHIBA Button Controls allow you to enable or disable the TOSHIBA Console and Internet buttons and the programs associated with them.
Toshiba Utilities TOSHIBA Console Sample TOSHIBA Controls Properties window 2 Click the Buttons tab 3 Check the boxes for the TOSHIBA Console button and/ or the Internet button. 4 Under Select a Program, make the desired selections. 5 Click Apply, then click OK. Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool. To access it: In the TOSHIBA Console, click the Toshiba Hardware icon. 5.375 x 8.375 ver 2.4.
Toshiba Utilities TOSHIBA Console 199 Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: ❖ Display — Allows you to select the built-in LCD and/or external monitor when the computer powers on. ❖ Boot Priority — Allows you to change the sequence in which your computer searches the drives for the operating system. You can also manually choose the Boot Priority by pressing the power button, then quickly pressing the F12 key, or the right or left arrow keys.
Toshiba Utilities TOSHIBA Console ❖ Keyboard — Allows you to enable or disable the “wakeup on keyboard” feature. The feature allows you to “wake” the machine from Standby mode by pressing a key. ❖ USB — Allows you to enable or disable USB Legacy Emulation. ❖ LAN — Lets you enable or disable LAN features. ❖ General — Shows the BIOS version, and allows you to set BIOS defaults. ❖ Password — Allows you to set or reset a user password for the power-on process and for instant security.
Chapter 8 TM Using WinDVD with Your Computer WinDVD™ is a software program for playing DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, play DVDs while your computer is connected to AC power. For systems with a DVD-ROM drive, you can use WinDVD to play DVDs. WinDVD is an easy-to-use, full-featured multimedia control center that helps you get the most out of the exciting world of DVD technology. Your computer comes with WinDVD preinstalled.
Using WinDVDTM with Your Computer Playing DVDs Insert a DVD into the drive. The computer automatically detects the disc in the drive and will prompt you what to do. Sample DVD Drive Window NOTE: If you wish to have WinDVD run automatically, select Play DVD movie using WinDVD, then select the Always do the selected action check box. This check box is unchecked by default. To open WinDVD manually: 1 Click Start, and select All Programs. 2 Select InterVideo WinDVD, then click InterVideo WinDVD.
Using WinDVDTM with Your Computer Using the WinDVD control panel 203 Sample WinDVD video window with the control panel Using the WinDVD slider bar (location) The slider bar enables you to move forward or backward through the DVD content. Move the slider bar to the left to go backward or move it to the right to go forward. Using the WinDVD control panel The WinDVD control panel resembles the control panel of a standard home DVD player.
Using WinDVDTM with Your Computer Using the WinDVD control panel Play Step forward Volume Stop Repeat Bookmarks Playlist Zoom Capture Speed Ring Help Minimize Maximize Close Open Subpanels Pause Step backward Time Control Clock Time shift Next Chapter Mute Eject Title Menu Previous Chapter Fast forward Fast back Sample WinDVD control panel You can open a shortcut menu by positioning the cursor over the WinDVD window (other than over the control panel), then clicking the secondary button.
Using WinDVDTM with Your Computer Using the WinDVD control panel 205 Sample WinDVD control panel with expanded view for showing advanced features Click this To do this Or use keyboard shortcut Play — starts disc playback. [spacebar] Step forward — steps forward in the playback one frame at a time. None Pause — pauses disc playback. Resume playback by clicking Play. [spacebar] Step backward — steps None backward in the playback one frame at a time. Stop — stops playback.
Using WinDVDTM with Your Computer Using the WinDVD control panel Click this To do this Or use keyboard shortcut None Speed Ring — enables you to control the speed at which the DVD plays. Move the slider upward to play the movie in fast forward. Move it further upward to increase forward speed. Move the slider downward to play the movie in fast reverse. Move it further downward to increase reverse speed. Placing the slider in the center, or clicking Play, plays the DVD at normal speed.
Using WinDVDTM with Your Computer Using the WinDVD control panel Click this To do this Previous Chapter — skip to the previous chapter in the movie. Or use keyboard shortcut PgUp Next Chapter — skip to PgDn the next chapter in the movie. Title Menu— opens the title menu of the inserted DVD. T Mute — click to mute movie sound. Click again to restore movie sound to its original level.
Using WinDVDTM with Your Computer Using the WinDVD control panel Click this To do this Or use keyboard shortcut Bookmarks — opens [K] the Bookmark browser, which enables you to bookmark scenes in a movie so that you can skip to them when selected. Capture — opens the None Capture browser, which enables you to capture still images of a movie. Eject — ejects the disk. E If the disk is still playing, this button stops play before the disk is ejected.
Using WinDVDTM with Your Computer Using WinDVD advanced features 209 Using WinDVD advanced features TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features may not appear or may appear gray, and you cannot select them. The features described in this section may be available on the WinDVD expanded control panel.
Using WinDVDTM with Your Computer Using playlists The playlist selection options are accessed by selecting the Expand subpanel button and the Navigation submenu. The playlist options are found within the Navigation menu. Options to use and create playlists allow you to open files, open existing playlists, create new playlists, and select DVDs from an existing folder. A playlist is a customized list of DVD files in the order in which you want to view them.
Using WinDVDTM with Your Computer Using playlists 2 211 Select New Playlist from the menu. The Playlist window opens. Sample WinDVD Playlist window 3 Select File to enable selection of a file, or Disc to create a playlist for an entire disc. 4 Locate each file (you may select multiple files) for your playlist using the directory browser. 5 Highlight the files and click Add, then OK to confirm your selection. 6 After adding all the files you want to include in the new playlist, click Save List.
Using WinDVDTM with Your Computer Using playlists Playing a Playlist After creating a new playlist, you can open it with WinDVD. The playlist keeps your selections organized so that you can play your favorites at any time. To play a playlist: 1 Open the playlist menu by clicking the Playlist button. See “Using the WinDVD control panel” on page 203. to locate the playlist button. Sample Playlist dialog 2 Select Open Playlist from the menu. The Open window appears.
Using WinDVDTM with Your Computer Getting Help 213 4 Click Load List to open the saved playlists. 5 Browse to the playlist you want to open then click Open and WinDVD displays the playlist. Getting Help Click the Help button to open the WinDVD Help system. Exiting WinDVD Click the Close button, to exit WinDVD. 5.375 x 8.375 ver 2.4.
Chapter 9 If Something Goes Wrong Some problems you may encounter when using your notebook computer are relatively easy to identify and solve. Others may require help from your dealer, your network administrator or the manufacturer of a software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems that are easy to fix 215 To close a program that has stopped responding: 1 Press Ctrl, Alt, and Del simultaneously (once). 2 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with step 4.
6 If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cable properly or installed a charged battery. Press and hold down the power button until the on/off light changes to green.
If Something Goes Wrong The Windows® operating system is not working 217 diskette drive, press the left or right arrow key and choose your boot-up device. HINT: Press F12 as you power on the computer to access the menu. The computer displays the WARNING RESUME FAILURE message. The computer was placed in Standby mode and the battery has discharged. Data stored in the computer’s memory has been lost.
❖ If Something Goes Wrong The Windows® operating system is not working The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
If Something Goes Wrong The Windows® operating system is not working ❖ 219 Return to OS Choices (menu) See your Windows® documentation for further explanation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
If Something Goes Wrong Resolving a hardware conflict The Help and Support Center window appears. 2 Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu.
If Something Goes Wrong Resolving a hardware conflict 221 you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU).
If Something Goes Wrong Resolving a hardware conflict Resolving conflicts There are three things you can do to resolve hardware conflicts: ❖ Disable the device. For an older device, remove it from the computer. ❖ Disable another system component and use its resources for the new device, see “Fixing a problem with Device Manager” on page 222. ❖ Reconfigure the device so that its requirements do not conflict.
If Something Goes Wrong Resolving a hardware conflict 6 223 Click the icon. You are given the option of disabling the device. 7 Click yes or no, whichever is appropriate. Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
If Something Goes Wrong Resolving a hardware conflict Memory module problems CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer). Incorrectly connected or faulty memory modules may cause errors that seem to be device-related.
If Something Goes Wrong Resolving a hardware conflict 225 Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cable will neither power the computer nor recharge the batteries.
If Something Goes Wrong Resolving a hardware conflict The battery appears not to power the computer for as long as it usually does. If you frequently recharge a partially charged battery, it may not charge fully. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility.
If Something Goes Wrong Resolving a hardware conflict 227 Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press the Enter key, type the password and press Enter. If no password is registered, press Enter.
❖ If Something Goes Wrong Resolving a hardware conflict Make sure the display choice is not set for the built-in screen only. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This displays the Display Properties window. The Appearance tab of this window allows you to choose the colors for the screen. The Settings tab allows you to choose the screen resolution.
If Something Goes Wrong Resolving a hardware conflict 229 The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work on your computer display. Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors.
If Something Goes Wrong Resolving a hardware conflict ❖ 6 Scan for and attempt recovery of bad sectors Click Start. Error-checking runs the test. Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, then click All Programs, point to Accessories and System Tools, and click Disk Defragmenter. Your data files are damaged or corrupted.
If Something Goes Wrong Resolving a hardware conflict 231 The computer displays the Non-system disk or disk error message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette. Try another diskette. If you can access the second diskette, the first diskette (not the drive) is probably causing the problem.
If Something Goes Wrong Resolving a hardware conflict manual eject button. This button is in the small hole next to the disc eject button on the right side of the computer. Some discs run correctly, but others do not. If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs. The color of the materials used to make the disc can affect its reliability.
If Something Goes Wrong Resolving a hardware conflict 233 these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. See “Resolving a hardware conflict” on page 220. Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
If Something Goes Wrong Resolving a hardware conflict available, try the card in that machine. If the card malfunctions again, it may be defective. Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead. PC Cards that used to work no longer work. Check the PC Card status: 1 Click Start. 2 Click My Computer icon with the secondary button, then click Properties. The System Properties window appears. 3 Click the Hardware tab.
If Something Goes Wrong Resolving a hardware conflict 2 235 Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. 3 Remove the card from the slot. The system does not recognize your PC Card. Refer to the PC Card documentation. Removing a malfunctioning card and reinstalling it can correct many problems. For more information, see “Using PC Cards” on page 182. A PC Card error occurs.
If Something Goes Wrong Resolving a hardware conflict You may have connected the printer while the computer is on. Disable Standby mode, turn off the computer, and turn off the printer. Turn the printer back on, make sure it is on line, then turn the computer back on. Try printing another file. For example, you could create and attempt to print a short test file using Notepad. If a Notepad file prints correctly, the problem may be in your original file.
If Something Goes Wrong Develop good computing habits 237 higher. Refer to the program’s documentation and the modem guide for information on how to change these settings. TECHNICAL NOTE: Disable Call Waiting before you connect through the modem. Call Waiting interrupts data transmission. The modem is on, set up properly and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line.
If Something Goes Wrong If you need further assistance Some people use a combination of these methods, backing up all files to tape weekly and copying critical files to diskette on a daily basis. If you have installed your own programs, you should back up these programs as well as your data files. If something goes wrong that requires you to reformat your hard disk and start again, reloading all your programs and data files from a backup source will save time. Read the user’s guides.
If Something Goes Wrong If you need further assistance 239 ❖ If the problem occurs while you are running a program, consult the program’s documentation for troubleshooting suggestions. Contact the software company’s technical support group for their assistance. ❖ Consult your network administrator. ❖ Consult the dealer or authorized Toshiba representative from whom you purchased your computer and/or program. Your dealer is your best source for current information.
If Something Goes Wrong Other Toshiba Internet Web sites ❖ Information about what you were doing when the problem occurred. ❖ Exact error messages and when they occurred. For technical support, call the Toshiba InTouch Center: ❖ Within the United States at (800) 457-7777 ❖ Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA www.toshiba.ca Canada www.
If Something Goes Wrong Toshiba’s worldwide offices 241 Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Austria Toshiba Europe GmbH Handelskai 388 1020 Wien, Austria Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Canada Toshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada Czech Republic CHG Toshiba, s.r.o.
If Something Goes Wrong Toshiba’s worldwide offices Luxembourg Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Mexico and all of Latin America Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 800-457-7777 (outside of the US) 949-859-4273 (within the US - this call may incur long distance charges) Morocco C.B.I.
If Something Goes Wrong Toshiba’s worldwide offices Sweden Scribona PC AB Sundbybergsväegen 1 Box 1374 171 27 Solna Sweden Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States The Rest of Europe Toshiba Europe (I.E.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 244 5.375 x 8.375 ver 2.4.
Hot Keys Instant password security 245 Instant password security Fn + This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password The Fn + F1 key combination turns off the display and activates instant security.
6 Hot Keys Instant password security Click OK. Maintaining security when the battery isn’t fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature. To set up a password with a screen saver, go to Windows® XP help for instructions: 1 Click Start, Help and Support.
Hot Keys Power usage mode 247 Power usage mode Fn + This hot key displays the power usage pop-up window and cycles through the battery save modes. The power usage modes in the operating system under battery power are: Long Life, Normal, and High Power; DVD Playback and Presentation Sample power usage modes ® The power usage mode in the Windows operating system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility.
Hot Keys Standby mode Standby mode Fn + This hot key puts the computer into Standby mode. ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. Click the check box to prevent the message box appearing in future. Sample standby confirmation box ❖ For more information about Standby mode, please see “Using Standby” on page 112. 5.375 x 8.375 ver 2.4.
Hot Keys Hibernation mode 249 Hibernation mode Fn + This hot key puts the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. Click the check box to prevent the message box appearing in future. Sample Hibernation confirmation box ❖ If Hibernation mode is disabled, this hot key has no effect. For more information on Hibernation mode, see “Using Hibernation” on page 105. 5.375 x 8.
Hot Keys Display modes Display modes Fn + This hot key cycles through the power-on display options. While holding down Fn, press F5 repeatedly until the setting you want takes effect. Then release the Fn key. NOTE: This hot key does not function while WinDVD is playing.
Hot Keys Display brightness 251 Display brightness Fn + The Fn + F6 hot key decreases the screen brightness. Fn + The Fn + F7 hot key increases the screen brightness. Disabling or enabling the TouchPad Fn + This hot key disables or enables the TouchPad. To use the TouchPad, see “Using the TouchPad” on page 65. Sample disable and enable TouchPad windows Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off.
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved United Kingdom BS approved Australia Europe AS approved VDA approved NEMKO approved 252 5.375 x 8.375 ver 2.4.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide.
Glossary DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IEEE Institute of Electrical and Electron
Glossary 255 RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may appear in this user’s guide.
Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
Glossary 257 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed — The speed at which the central processing unit (CPU) communicates with the other parts of the computer. byte — A sequence of eight bits. A byte is the smallest addressable unit of data.
Glossary color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Glossary 259 direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk.
Glossary DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CDROMs. Compare CD-ROM. E emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. executable file — A computer program that is ready to run.
Glossary 261 folder — Also called directory. A container for organizing files saved to a disk. A folder is symbolized on screen by a graphical image (icon) of a file folder. A folder can contain files and other folders. format — (verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it.
Glossary high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with the Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change.
Glossary 263 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it. A filter over the electrodes permits only nonpolarized light to pass to the surface of the display, creating light and dark pixels.
Glossary MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. N network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail.
Glossary 265 PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer.
Glossary removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically. restart — Synonymous with reboot.
Glossary 267 Standby — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
W Glossary Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 2.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet. 5.
Index A AC adapter 58 AC power light 34, 62 Accessories programs 157 adding memory 46 alarms low battery 125 audio CDs playing 86 audio features 178, 179 avoiding injury 39 B battery alarms 125 changing 126 charge not lasting 226 charging 60, 121 conserving power 124 disposal 129 inserting 128 installing 126 light 34, 62, 122 Li-ion (lithium ion) 117 monitoring power 122 NiMH (nickel metal hydride) 118 power usage mode 247 recharging 121 remaining power 123 removing 126 RTC (real-time clock) 118, 122 sett
Index previous track 35 primary control 32, 66 secondary control 32, 66 Start 133 stop 35 TOSHIBA Console 33, 80 C calculator 149 CD control buttons 88 CD Player control panel 92 CD/DVD control buttons 27, 32, 35, 87, 88 CD/DVDs caring for 96 inserting 90, 91 playing 86 removing 95 viewing contents 94 CD-ROMs using 86 CDs 27, 32, 94 inserting 91 problem solving 232 changing main battery 126 channels DMA 221 IRQ 221 Character Map 150 charging main battery 60, 121 RTC (real-time clock) battery 122 chec
Index external speakers 181 headphones 181 modem 97 power cable 59 television 54 to a network 98 USB-compatible keyboard 57 mouse 53 conserving battery power 124 cooling vents CPU 30 copying files to another computer 169 cursor control mode light 33 customizing taskbar 163 window toolbars 166 D date and time setting 154 DC-IN 59 desktop 132 browsing style 164 choosing style and browsing options 164 creating new icon 133 creating shortcuts 149 major features 132 properties 152 shortcut menu 136 Start butto
Index problems 231 removing a disc 95 troubleshooting 223 DVDs 27, 32, 86 playing 178 E email 176 emulating a full-size keyboard 80 environmental considerations 38, 39, 40 ergonomics lighting 41 posture 40 seating guidelines 40 work habits 42 error messages device driver conflict 220 general hardware problem 220 non-system disk or disk error 217, 231 problem with display settings/ current settings not working with hardware 228 program has performed an illegal operation 215 warning resume failure 217
Index headphones connecting 181 Help 158 Windows XP 219 Hibernation low battery 125 Hibernation command 100 enabling 106 Hibernation mode 100 methods 107, 108, 249 hiding windows 145 hot key disabling/enabling TouchPad 251 display modes 250 display output settings 55 keyboard 251 keyboard overlays 251 power usage mode 247 Standby mode 248 volume mute 244 hot keys 244 hot swapping precautions 184 Hotkey utility 191 Hypertext Transfer Protocol (HTTP) 174 I icon 133 moving to desktop 133 safety 23 indicator
Index lights AC power 34, 62 battery 34, 62, 122 cursor control mode 33 disk/disc activity 35 diskette activity 83 diskette drive 35 hard disk drive 34, 62 keyboard 33 multi-function drive 35 numeric mode 34 on/off 34 system 32 lock slot 30 M main battery changing 126 recharging 121 removing 126 memory adding 46 problem solving 224 removing 51 memory module inserting 49 microphone in jack 27, 32 Microsoft Internet Explorer 97 Microsoft Support Online Web site 220 Microsoft Windows XP 22, 131 minimizi
Index parallel port 28 password power-on 63 PC Card checklist 233 CIS (Card Information Structure) 233 computer stops working 234 eject button 30 errors 235 hot swapping fails 234 inserting 183 modem default 170 not recognized 235 problem solving 232, 234 removing 184 replacing 184 slots 30 using 182 PCMCIA (Personal Computer Memory Card International Association) 182 play/pause button 35 playing CDs and DVDs 86 ports COM 170 external diskette drive 57 LAN 28 modem 28 parallel 28 RGB (monitor) 28 USB 28 po
Index external display not working 229 external keyboard not working 226 external monitor 227 faulty memory 224 hardware conflict 220, 221 high-pitched noise 232 illegal operation 215 Internet bookmarked site not found 219 Internet connection is slow 219 keyboard not responding 216 keyboard produces unexpected characters 226 missing files/trouble accessing a disk 229 modem not receiving or transmitting 236, 237 multi-function drive tray doesn’t eject 231 no sound 232 non-system disk or disk error 217,
Index screen 33 blank 227 doesn’t look normal/flickers 228 Screen Saver tab 153 SCSI (Small Computer Systems Interface) 185 Search Engine 175 secondary control button 32, 66 security fitting a computer lock cable 73 lock slot 30 SelectServ 25 setting battery alarms 125 setting up communications 97 computer 38, 43 date and time 154 printer 68 shortcut creating 149 menu 136 Shut down using 101 Shut down command 99 sound .
Index disabling or enabling 66, 251 using 65, 135 travelling tips 130 Turn Off using 101 Turn Off command 99, 103 Turn Off methods 103 turning computer on/off 31, 61 turning off the computer 72 tutorials 160 U Uniform Resource Locator (URL) 163, 175 uploading 176 URL (Uniform Resource Locator) 163, 175 USB ports 28 USB-compatible keyboard connecting 57 mouse connecting 53 using modem 97 PC Cards 182 TouchPad and control buttons 135 utilities Hotkey utility 191 Power Management 194 TOSHIBA Button Cont
Index tours and tutorials 160 WinDVD 178 advanced features 209 control panel 203 help 213 playback buttons 204 playing DVDs 202 playlists 209 slider bar 203 starting 202 video window, maximizing 208 wireless features antenna 29 Wi-Fi 173 wireless networking 172, 173 Wizards Add Printer 68 Network Setup 98 New Connection Wizard 172 World Wide Web 174 5.375 x 8.375 ver 2.4.