Owner manual

ManualsBrandsToshiba ManualsAccessories for videoSatellite 2430-301

Satellite

SATELLITE2430 SATELLITE2430 SATELLITE2430 SATELLITE2430 SATELLITE2430SATELLITE2430

2430

TOSHIBATOSHIBA

computers.toshiba-europe.com

Choose freedom.

T201850-EN

User’s Manual

Summary of content (222 pages)

PAGE 1
Satellite User’s Manual 2430 User’s Manual 2430 T201850-EN SATELLITE2430 SATELLITE2430 SATELLITE2430 SATELLITE2430 SATELLITE2430 SATELLITE2430 Choose freedom. computers.toshiba-europe.
PAGE 2
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Copyright © 2002 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
PAGE 3
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual EU Declaration of Conformity This product carries the CE-Mark in accordance with the related European Directives. CE-Marking is the responsibility of TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. CD-RW/DVD-ROM/DVD-RAM drive safety instruction ** means any letters or numbers. The CD-RW/DVD-ROM/DVD-RAM drive employs a laser system.
PAGE 4
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT TO EN 60825-1 CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.
PAGE 5
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual TOSHIBA SD-C2612 Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. MANUFACTURED: TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME MINATO-KU, TOKYO 105-8001, JAPAN CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT TO EN 60825-1 CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.
PAGE 6
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual CD-RW/DVD-ROM/DVD-R/-RW drive safety instruction ** means any letters or numbers. The CD-RW/DVD-ROM,DVD-R/-RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorised service location.
PAGE 7
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
PAGE 8
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual General Precautions TOSHIBA computers are designed to optimise safety, minimise strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Please also refer to the Safety Instruction Manual.
PAGE 9
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual PC Card overheating Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is used extensively. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time.
PAGE 10
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual The consequences of the use of this product in non-approved working environments may be: ■ Interference with other devices or machines in the near surrounding area ■ Malfunction of, or data loss from, this product caused by disturbances generated by other devices or machines in the near surrounding area Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all n
PAGE 11
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Information on the secure use of the CD-RW/DVD-RW Please adhere to the following information on the use of the CD-RW/DVD-RW to minimise the risk of unsuccessful storing process. As the storing may be unsuccessful despite your adhering to these information, for example because of a defective storing medium, you should even if the software indicates a successful storage, always check if the data has been stored successfully.
PAGE 12
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual About TOSHIBA Wireless Solution Wireless LAN Card Types The Wireless LAN Card is a wireless network card that complies with the IEEE 802.11 standard on wireless LANs (Revision B). The Wireless LAN Card supports data rates up to 11 Mbit/s. ■ Wi-Fi (Wireless Fidelity) certified by the Wireless Ethernet Compatibility Alliance (WECA). This means that your Wireless hardware will communicate with other vendors’ IEEE 802.
PAGE 13
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any Wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ■ The IEEE 802.11 Standard on Wireless LANs (Revision B), as defined and approved by the Institute of Electrical and Electronics Engineers.
PAGE 14
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
PAGE 15
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Turn OFF the Wireless Communication switch inside a medical facility or near medical electric equipment.
PAGE 16
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
PAGE 17
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Belgium/ België/Belgique For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. An IBPT/BIPT license is required for public usage outside building.
PAGE 18
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual France Restricted frequency band: only channels 10 and 11 (2457 MHz and 2462 MHz respectively) may be used in France. License required for every installation, indoor and outdoor installations. Please contact ART for procedure to follow. Bande de fréquence restreinte : seuls les canaux 10 à 11 (2457 et 2462 MHz respectivement) doivent être utilisés en France.
PAGE 19
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Caution: Exposure to Radio Frequency Radiation. The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. Both antenna types, when installed are located at the upper edge of the LCD screen. For both antennas, the radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits.
PAGE 20
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Using this equipment in Japan In Japan, the frequency bandwidth of 2,400~2,483.5MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station). 1. Sticker Please put the following sticker on devices incorporating this product.
PAGE 21
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 User's Manual Device Authorisation This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.
PAGE 22
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Satellite 2430 Series Table of Contents Preface ...................................................................................... xxix Manual contents.................................................................................. xxix Conventions.......................................................................................... xxx Abbreviations................................................................
PAGE 23
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Chapter 2 The Grand Tour........................................................2-1 Front with the display closed ...............................................................2-1 Left side..................................................................................................2-3 Right side ...............................................................................................2-4 Back side ...............
PAGE 24
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Chapter 4 Operating Basics .....................................................4-1 Using the Touch pad .............................................................................4-1 Changing SelectBay modules ..............................................................4-3 Removing a module...........................................................................4-3 Installing a module..................................
PAGE 25
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Chapter 5 The Keyboard ..........................................................5-1 Typewriter keys .....................................................................................5-1 F1…F12 function keys...........................................................................5-2 Soft Keys: Alt Gr Key Combinations ....................................................5-2 Soft keys: Fn key combinations ................
PAGE 26
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Chapter 7 Optional Devices .....................................................7-1 PC Cards ................................................................................................7-2 Installing a PC Card...........................................................................7-2 Removing a PC Card .........................................................................7-3 SD Cards ..............................
PAGE 27
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Chapter 8 Troubleshooting ......................................................8-1 Problem solving process ......................................................................8-1 Preliminary checklist..........................................................................8-2 Analysing the problem .......................................................................8-2 Hardware and system checklist....................
PAGE 28
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Table of Contents Appendix A Specifications ...................................................... A-1 Appendix B AC Power Cord and Connectors ....................... B-1 Appendix C The TOSHIBA International Warranty ...............C-1 Appendix D Keyboard Layouts ...............................................D-1 Appendix E Display Controller and Modes............................ E-1 Appendix F If your computer is stolen ....................
PAGE 29
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Preface Satellite 2430 Series Preface Congratulations on your purchase of the Satellite 2430 series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite 2430 series computer.
PAGE 30
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Preface Chapter 5, The Keyboard, describes special keyboard functions including the keypad overlay and hotkeys. Chapter 6, Power and Power-Up Modes, gives details on the computer’s power resources. Chapter 7, Optional Devices, describes the optional hardware available. Chapter 8, Troubleshooting, suggests courses of action if the computer doesn’t seem to be working properly. The Appendices provide technical information about your computer.
PAGE 31
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C. If three keys are used, hold down the first two and at the same time press the third.
PAGE 32
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Satellite 2430 Series Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer’s special features, utilities and options. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
PAGE 33
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Software The following software preinstalled on your hard disk: ■ Windows XP Home Edition is preinstalled The Windows XP preinstallation includes the following software: ■ Microsoft Windows XP Home Edition ■ TOSHIBA Utilities ■ Display Driver ■ Touch pad driver ■ Sound driver ■ Modem driver ■ DVD Video Player ■ Wireless LAN driver (Provided only if Wireless LAN is preinstalled.
PAGE 34
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Features The Satellite 2340 series computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability.
PAGE 35
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Power Battery Pack 12-cel Li-Ion 18650 size smart battery pack 3.5 hour charging time to 100% capacity when system is off. 12 hour charging time to 100 % when system is on. RTC Battery The computer has an internal battery to back up the internal Real Time Clock (RTC) and calendar. AC adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low.
PAGE 36
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Ports External monitor 15-pin analogue VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has three Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports.) The USB drives may be used to transfer data at Low, Full, and High speeds. i.
PAGE 37
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Headphone jack Outputs analogue or digital audio. Microphone jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input. Line-in jack A standard 3.5 mm line-in jack enables connection of a stereo device for audio input. Communications Modem An internal modem provides capability for data and fax communication. It supports V.90.
PAGE 38
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
PAGE 39
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Panel Power Off/On This feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened. You can specify the setting in the TOSHIBA Power Management Utility. Low Battery Automatic Hibernation When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation and shuts down.
PAGE 40
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Utilities This section describes preinstalled utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme files. TOSHIBA Power Management Utility There are two ways to display the Windows XP Control Panel. The default is Category View. TOSHIBA Power Management Utility is under the Performance and Maintenance item.
PAGE 41
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules Two memory modules can be installed in the computer. Use only PC2100 compatible memory modules. See your TOSHIBA dealer for details. Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time.
PAGE 42
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Satellite 2430 Series Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The figure below shows the computer’s front with its display panel in the closed position.
PAGE 43
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour MODE Left & Right Speakers The front edges for both the left and right speakers. Display Latch This latch secures the LCD panel in its closed position. Slide the latch to open the display. Mode Press this button to cycle between various CD, DVD and audio functions. Refer to Chapter 4, Operating Basics, for details. Play/Pause Press this button to begin playing an audio CD, a DVD Pause movie or digital audio files.
PAGE 44
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Left side The figure below shows the computer's left side. WIRELESS COMMUNICATION SWITCH SECURITY LOCK MICROPHONE LINE IN HEADPHONE VOLUME CONTROL LEFT SPEAKER The left side of the computer Off On Security Lock A security cable attaches to this slot. The optional security cable anchors your computer to a desk or other large object to deter theft.
PAGE 45
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Right side The figure below shows the computer’s right side. USB PORT RIGHT SPEAKER PC CARD SLOT i.LINK PORT SD CARD SLOT INFRARED PORT The right side of the computer Universal Serial Bus (USB) Port The Universal Serial Bus (USB) port enables chain connection of a number of USB-equipped devices. For example, you might connect a USB-HUB to the computer, then connect a keyboard to the USB-HUB and a mouse to the keyboard.
PAGE 46
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour This slot lets you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD cards. The cards have a high level of security and copy protection features. This slot does not support MultiMedia cards. Refer to Chapter 8, Optional Devices. SD card slot Keep foreign objects out of the SD card slot. A pin or similar object can damage the computer’s circuitry.
PAGE 47
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Modem Jack In areas where an internal modem is installed as standard equipment, there is a modem jack that lets you use a modular cable to connect the modem directly to a telephone line. The modem is not supported in some marketing regions. In case of a lightning storm, unplug the modem cable from the telephone jack. Do not connect the modem to a digital telephone line. A digital line will damage the modem.
PAGE 48
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Underside The figure below shows the underside of the computer. Make sure the display is closed before turning over your computer. EXPANSION MEMORY SOCKET AND WIRELESS LAN SOCKET SELECTBAY BATTERY SELECTBAY RELEASE LATCH INLET VENTS BATTERY LATCH The bottom of the computer Wireless LAN Socket Consult your TOSHIBA dealer for installation of a Wireless LAN card.
PAGE 49
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Front with the display open The figure below shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.
PAGE 50
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour TOSHIBA Console Button You can associate an application to this button for automatic launch. If the computer is off, pressing this button starts the computer and launches the associated program automatically. TV-Out Button Switches the LCD over to video or television if a device has been connected through the TV-Out port with an S- video cable. While in this mode, you cannot use your computer’s other functionality.
PAGE 51
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Indicators The figures below show the system and keyboard indicator lights, which light when various computer operations are in progress. DIGITAL CD/DVD POWER DC IN 15V HDD BATTERY OPTICAL MEDIA/FD The system indicators CD/DVD The CD/DVD indicator glows green when the computer is in CD mode. Digital The Digital indicator glows green when the computer is in Digital mode.
PAGE 52
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour ARROW MODE NUMERIC MODE The keyboard indicators Caps Lock The Caps Lock LED (on the Caps Lock key) glows green when the alphabet keys are locked in uppercase. Arrow Mode When the Arrow mode icon lights green, you can use the keypad overlay (light grey labelled keys) as cursor keys. Refer to the Keypad Overlay section in Chapter 5, The Keyboard.
PAGE 53
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour Drives This section describes the 3 ½" diskette and CD-RW/DVD-ROM drives. 3 ½" diskette drive DISKETTE SLOT EJECT BUTTON The diskette drive The 3 ½" diskette drive lets you use either double density (720 KB) or high density (1.44 MB) 3 ½" diskettes for data transfer and storage. Diskette Slot Insert diskettes into this slot. Eject Button When a diskette is fully seated in the drive, the eject button pops out.
PAGE 54
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module lets you play from and record data to rewritable DVDs and CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adaptor. Use the preinstalled software, Drag ’n Drop, for writing CDs.
PAGE 55
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Grand Tour AC adaptor The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region. To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6, Power and Power-Up Modes, for details.
PAGE 56
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Satellite 2430 Series Chapter 3 Getting Started This chapter provides basic information to get you started using your computer.
PAGE 57
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation. ■ Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.
PAGE 58
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips. 90 1 Posture and positioning of the computer ■ Place your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed.
PAGE 59
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Lighting Proper lighting can improve legibility of the display and reduce eye strain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare. ■ Avoid placing the computer in front of bright light that could shine directly in your eyes. ■ If possible, use soft, indirect lighting in your computer work area.
PAGE 60
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz.
PAGE 61
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right to unlatch the display panel. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.
PAGE 62
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Turning on the power This section describes how to turn on the power. 1. Make sure the diskette drive is empty. If a diskette is in the drive, press the eject button and remove the diskette. 2. Open the display panel. 3. Press and hold the computer’s power button for two or three seconds.
PAGE 63
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen. 1. If you have entered data, save it to the hard disk or to a diskette. 2.
PAGE 64
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Benefits of Hibernation The hibernation feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Management utility: the Power Save Modes tab and the Advanced tab. Otherwise, the computer will shut down in Standby mode.
PAGE 65
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Built-in HDD indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately.
PAGE 66
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Benefits of standby The standby feature provides the following benefits: ■ Restores the previous working environment more rapidly than does hibernation. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the System Standby feature. ■ You can use the panel power off feature. Executing standby You can also enable Standby by pressing Fn + F3.
PAGE 67
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Getting Started Restarting the computer Certain conditions require that you reset the system. For example, if: ■ You change certain computer settings. ■ An error occurs and the computer does not respond to your keyboard commands. There are three ways to reset the computer system: 1. Select Restart from the Turn Off Computer window in the start box. 2. If the computer is already on, press Ctrl + Alt + Del. 3.
PAGE 68
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Satellite 2430 Series Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch pad, optical media drives, the internal modem, LAN and Wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the Touch pad To use the Touch pad, simply move your finger tip across it in the direction you want the on-screen pointer to go.
PAGE 69
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics The Touch pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap the Touch pad instead of pressing a control button. You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window. Click Click the left control button or tap the Touch pad one time.
PAGE 70
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Changing SelectBay modules This section explains how to change modules in the SelectBay. It describes removal of the CD-RW/DVD-ROM drive and installation of the SelectBay floppy disk drive. However, the procedures are the same for any of the optional modules: DVD-R/RW drive, DVD-RAM drive, SelectBay HDD adaptor or secondary battery pack. To avoid injury, do not put your hand into the SelectBay slot.
PAGE 71
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Safety Precautions When operating your DVD device, please keep the following in mind: 1. Turn off the computer before mounting or removing the device in order to avoid the risk of damaging it. 2. Insert the DC power plug in the correct direction in order to avoid the risk of damaging the device. 3.
PAGE 72
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Loading discs To load a CD/DVD, follow the steps below and refer to the accompanying figures. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. Pressing the eject button b. Pressing the eject button will not open the drawer when the computer’s power is off.
PAGE 73
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics 3. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 4. Lay the CD/DVD, label side up, in the drawer. Inserting a CD/DVD Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. Satellite 2430 Series 4-6 ENGLISH using Euro_M.
PAGE 74
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics 5. Press gently at the centre of the CD/DVD until you feel it click into place. The CD/DVD should lie below the top of the spindle, flush with the spindle base. 6. Push the centre of the drawer to close it. Press gently until it locks into place. If the CD or DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button.
PAGE 75
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Removing discs To remove the CD/DVD, follow the steps below and refer to the following illustration. Do not press the eject button while the computer is accessing the drive. Wait for the Diskette/Optical Media indicator to go out before you open the drawer. Also, if the CD/DVD is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button.
PAGE 76
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics CD/Digital Mode button This section describes how to use the CD/DVD/Audio Control Buttons to control the optical media drive and Digital Audio Data. Whether your computer is turned on or off, the CD/DVD/Audio control buttons are locked by default. To unlock them, press the CD/ Digital mode button for more than 3 seconds. Press the CD/Digital mode button again for over 3 seconds to lock them again.
PAGE 77
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics CD/DVD/Audio control buttons Besides the power button, the following four buttons control functions of the optical media drive drives and Digital Audio Data: 1. Play/Pause Starts or pauses play. 2. Stop Stops play. 3. Next Advances to the next track, chapter or data. 4. Previous Returns to the previous track, chapter or data.
PAGE 78
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver which can put a heavy load on the CPU. ■ Operate the computer at full power. Do not use power-saving features. ■ Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.
PAGE 79
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and diskettes. CDs/DVDs Handle your CD/DVDs with care. The following simple precautions will increase the lifetime of your CD/DVDs and protect the data stored on them: 1. Store your CDs/DVDs in the container they came in to protect them and keep them clean. 2. Do not bend the CD/DVD. 3.
PAGE 80
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Using the internal modem This section describes how to make settings and connect the modem. Refer to the computer’s online help files for more information. Refer also to the online help files for your modem software. The International modem does not support voice functions. Data and fax functions are supported. In case of a lightning storm, unplug the modem cable from the telephone jack.
PAGE 81
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem’s settings are correct for the country/region in which it will be used. 1. Point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
PAGE 82
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. The properties menu Setting You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialling Properties dialog box after selecting region.
PAGE 83
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Dialling properties Select this item to display the dialling properties. If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select Japan region mode. It is illegal to use the modem in Japan with any other selection. Connecting To connect the international modem cable, follow the steps below.
PAGE 84
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics LAN The computer is equipped with LAN circuits that support Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-Tx). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled. Wake-up on LAN does not work without the AC adaptor. Leave it connected, if you are using this feature.
PAGE 85
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
PAGE 86
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Wireless communication switch You can enable or disable Wireless LAN functions, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch toward the left of the computer to turn it on and toward the left of the computer to turn it off. Set the switch to off in airplanes and hospitals. Check the LED. It will stop glowing when the wireless communication function is off.
PAGE 87
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Countries/Regions where type approvals, or use permission is in process, or already obtained for the built-in, or optionally available Wireless LAN Mini PCICard. Do not use this equipment in Countries/Regions, in which this equipment is not approved. Contact one of your TOSHIBA Worldwide Computer Representatives in Appendix C for further information.
PAGE 88
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics TV-Out Use this jack to connect to a television. Be sure to use a video cable. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.
PAGE 89
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Operating Basics Heat dispersal To protect from overheating, the CPU has an internal temperature sensor that triggers a cooling fan or lowers the CPU operating speed. Use the Toshiba Power Management Utility to select one of three temperature controls. Maximum Performance Mode Turns on fan first, then if necessary lowers CPU processing speed. Mid Performance Mode Uses a combination of fan and lowering the CPU processing speed.
PAGE 90
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Satellite 2430 Series Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.
PAGE 91
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard F1…F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark grey, but function differently from the other dark grey keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer.
PAGE 92
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Emulating keys on enhanced keyboard Esc F1 ~ @ ! 1 ` CapsLock Shift W A F4 $ 4 # 3 2 Q Tab F3 F2 % 5 E S Z R D X F5 F C Y G I J N F8 F9 ( 9 8 U H B V F7 * & 7 ^6 T F6 K M _ - ) 0 O > .
PAGE 93
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Hotkeys Hotkeys (Fn + a function or cursor key) let you enable or disable certain features of the computers. Sound mute: Pressing Fn + Esc turns sound on or off. When you press these hotkeys, the current setting will be displayed in a window. Instant security: Press Fn + F1 to blank the screen to prevent others from accessing your data. To restore the screen and original settings, press any key or use the Touch pad.
PAGE 94
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Display selection: Press Fn + F5 to change the active display device. When you press these hot keys a dialog box appears. Only selectable devices will be displayed. Hold down Fn and press F5 again to change the device. When you release Fn and F5, the selected device will change. If you hold down the keys for three seconds the selection will return to LCD. Display brightness: Pressing Fn + F6 decreases the display brightness.
PAGE 95
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows XP. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows XP Start menu. This key has the same function as the secondary mouse button.
PAGE 96
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11 (Numeric mode indicator lights). Now try numeric data entry using the keys in the following illustration. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key.
PAGE 97
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The Keyboard Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn. 2. Check the keyboard indicators. Pressing Fn turns on the most recently used overlay. If the Numeric mode icon lights, you can use the overlay for numeric entry. If the Arrow mode icon lights, you can use it for cursor and page control. 3.
PAGE 98
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Satellite 2430 Series Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
PAGE 99
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Power on AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • Alarm sounds (depending on the Toshiba Power Management Utility Setting) • LED: Battery flashes orange DC IN off Battery charge exhausted Computer goes into resume mode and shuts down No Battery installed • No operation • LED:
PAGE 100
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status from the AC adaptor connected: Green Indicates the AC adaptor is connected and supplying proper power to the computer. No light Indicates the AC adaptor is not connected.
PAGE 101
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The following message appears when you turn on the power: S ERROR: 0271=Check date and time settings.
PAGE 102
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Danger 1. Never try to dispose of the battery pack by burning or expose it to a heating device such as a microwave oven. The battery pack could explode and cause bodily injury. 2. Never try to disassemble, repair or otherwise tamper with a battery pack. The battery pack will overheat and ignite.
PAGE 103
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Warning 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid should contact your eyes, immediately wash your eyes with large amounts of running water and seek medical attention, to help prevent eye damage. It electrolyte fluid should contact your skin, immediately wash it under running water to prevent rash.
PAGE 104
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. To ensure the battery pack maintains maximum capacity, operate the computer on battery power once a week until the battery pack is fully discharged. Refer to the section Extending battery life in this chapter for procedures.
PAGE 105
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack 3.5 to 12 or longer about 3.5 RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
PAGE 106
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Management Utility. Refer to Utilities in Chapter 1, Introduction. Wait for a moment after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity. With repeated discharges and recharges, the battery’s capacity will gradually decrease.
PAGE 107
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the computer will retain data for the following approximate time periods: Battery pack 4 days or longer (Standby mode) 1 month or longer (Shut down mode) RTC battery 1 month or longer Extending battery life To maximise the life of your battery pack: ■ If you have extra battery packs, rotate their use.
PAGE 108
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes 4. Turn the computer upside down. 5. Slide the battery latch to the right, then pull the battery out of the battery bay. Removing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. Satellite 2430 Series 6-11 ENGLISH using Euro_M.
PAGE 109
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer’s power off. 2. Disconnect all cables connected to the computer. 3.
PAGE 110
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Power and Power-Up Modes Power-up modes The computer has three power-up modes: ■ Hibernation (saves data in memory to the hard disk) ■ Standby (Power remains on, saving data in RAM, but the CPU and all other devices enter sleep mode.) ■ Boot (does not save data in memory) Refer also to the sections Turning off the power in Chapter 3, Getting Started and to Special Features in Chapter 1, Introduction.
PAGE 111
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Satellite 2430 Series Chapter 7 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following types of devices: cards/memory ■ PC Cards ■ SD Cards ■ Memory modules Power devices ■ Additional battery pack ■ Additional AC adaptor Peripheral devices ■ ■ ■ ■ ■ Parallel printer External monitor Television i.
PAGE 112
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices PC Cards The computer is equipped with a PC Card (PCMCIA) expansion slot that can accommodate two 5 mm Type II cards or one 10.5 mm Type III card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards. CardBus supports the new standard of 32-bit PC Cards.
PAGE 113
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Removing a PC Card 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card you want to remove to extend the button. 4. Press the extended eject button to pop the card out slightly. 5. Grasp the PC Card and remove it. Removing a PCcard Satellite 2430 Series 7-3 ENGLISH using Euro_M.
PAGE 114
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices SD Cards The computer is equipped with an SD Card slot that can accommodate Secure Digital flash memory cards with capacities of 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, and 512 MB. SD Cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD Card flash-memory. The cards have a copy protection features, but it does not support SD security functions.
PAGE 115
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Removing an SD Card To remove an SD Card, follow the steps below. 1. Right-click the SD Card icon on the system tray and select Eject from the pop-up menu. 2. Push in the card and release it to pop the card out slightly. 3. Grasp the card and remove it. Removing an SD Card Make sure the SD Card indicator is out before you remove the card or turn off the computer’s power.
PAGE 116
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Memory expansion You can install additional memory in the computer’s memory module sockets to increase the amount of RAM. This section describes how to install and remove a memory module. Before you install or remove a memory module, turn off the computer with the Shut Down option in the Windows Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.
PAGE 117
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices 4. Remove the screw securing the memory module socket cover. 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module’s connectors into the computer’s connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer.
PAGE 118
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Removing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. If you have a Wireless LAN card installed, you will need to remove that before you can remove or install a memory module. To remove the memory module, make sure the computer is in boot mode then: 1.
PAGE 119
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes.
PAGE 120
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices External monitor An external analogue monitor can be connected to the external monitor port on the computer. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor’s power on. 4. Turn the computer on.
PAGE 121
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices When connecting a TV (NTSC), please set the Display resolution to 640 x 480, following the steps below. 1. Open Display properties and select the Settings tab. 2. Select Advanced. Display properties 3. Select the Adaptor tab, then select List all modes. The Adaptor window Satellite 2430 Series 7-11 ENGLISH using Euro_M.
PAGE 122
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices 4. Select 640 by 480, High Colour (16 bit), 60 Hertz. Resolution menu i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical media drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.
PAGE 123
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer. 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: ■ You may need to install drivers for your i.LINK devices. ■ Not all i.LINK devices have been tested. Therefore, compatibility with all i.LINK devices cannot be guaranteed.
PAGE 124
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorised removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. Security lock Satellite 2430 Series 7-14 ENGLISH using Euro_M.
PAGE 125
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Satellite 2430 Series Chapter 8 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
PAGE 126
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. ■ Before you attach an external device, turn the computer off.
PAGE 127
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Software The problems may be caused by your software or diskette. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages.
PAGE 128
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting System start-up When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: S In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.
PAGE 129
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Overheating power down If the computer’s internal temperature becomes too high, the computer will automatically shut down. AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes, for more information. Problem Procedure AC adaptor doesn't power the computer (DC IN indicator should glow green) Check the connections.
PAGE 130
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn’t power the computer The battery may be discharged. Connect the AC power cord to charge the battery.
PAGE 131
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press Fn + F10 and try typing again. Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key.
PAGE 132
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Hard disk drive Problem Procedure Computer does not boot from hard drive Insert a system diskette and reboot. There may be a problem with your operating system files. Refer to your OS documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter.
PAGE 133
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Problem Procedure Some CD/DVDs run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the disc's documentation. Check the type of disc you are using.
PAGE 134
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting DVD-R/-RW drive (optional) For more information, refer to Chapter 2, The Grand Tour, and to Chapter 4, Operating Basics. Problem Procedure You cannot access a disc in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated. It should lie flat with the label facing up.
PAGE 135
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing.
PAGE 136
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Problem Procedure Some CDs run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration match’s your software’s needs. Check the disc’s documentation. Check the type of disc you are using.
PAGE 137
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Diskette drive For more information on the diskette drive, refer to Chapter 2, The Grand Tour. For information on diskette care refer to Chapter 4, Operating Basics. Problem Procedure Some programs run correctly, but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. You cannot access the diskette drive Try another disk.
PAGE 138
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Printer Refer also to the Parallel printer section in Chapter 7, Optional devices, and to the troubleshooting and other relevant sections in your printer and software documentation. Problem Procedure Printer does not turn on Check that the printer is connected to an electric outlet. Make sure the outlet is supplying power by plugging in an appliance.
PAGE 139
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the computer.
PAGE 140
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting USB mouse (optional) Problem Procedure On-screen pointer does not respond to mouse operation The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it. Double- clicking does not work Try changing the double-click speed in the mouse control utility. Open the Control Panel, select the Mouse icon and press Enter. 1. Click the Buttons tab. 2.
PAGE 141
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting TV output signal Problem Procedure Display on TV is poor Make sure the TV type is correct for your area: NTSC (US) or PAL (Europe). No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display. Refer to Chapter 5, The Keyboard. If problems persist, contact your dealer.
PAGE 142
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Memory expansion Refer also to Chapter 7, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up and issue beep sounds. (A long beep, three short beeps, three short beeps, and then a long beep.) Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below. 1.
PAGE 143
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Problem Procedure A CONNECT display is quickly replaced by NO CARRIER Check the error control setting in your communications application. Character display becomes garbled during a communication In data transmission, make sure the parity bit and stop bit settings correspond with those of the remote computer. You cannot receive an incoming call Check the rings before auto answer setting in your communications application.
PAGE 144
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Monitor Refer also to Chapter 7, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on. Confirm that the external monitor’s power cable is plugged into a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor.
PAGE 145
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Troubleshooting Memory expansion Refer also to Chapter 7, Optional Devices, for information on installing memory modules. Problem Procedure Beep sounds Make sure the memory module installed in the expansion slot is compatible with the computer. If an incompatible module has been installed, follow the steps below. 1. Turn off the power. 2. Disconnect the AC adaptor and all peripheral devices. 3. Remove the battery pack. 4.
PAGE 146
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Specifications Satellite 2430 Series Appendix A Specifications This appendix summarises the computer’s technical specifications.
PAGE 147
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Specifications Communication specifications Communication system Data: Fax: Full duplex Half duplex Communication protocol Data ITU-T-Rec (Former CCITT) V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90 Bell 103/212A Fax ITU-T-Rec (Former CCITT) V.17/V.29/V.27ter/ V.
PAGE 148
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Specifications Certification This product is approved for electrical safety and/or electromagnetic compatibility (EMC) by the following associations: TÜV DIN GOST TÜV UL CSA FCC TOSHIBA declares that this product complies with the following directives to be observed for CE marking. CE-Marking is the responsibility of TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
PAGE 149
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AC Power Cord and Connectors Satellite 2430 Series Appendix B AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country in which it is used. All cords must meet the following specifications: Length: Minimum 2 metres Wire size: Minimum 0.
PAGE 150
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AC Power Cord and Connectors Italy: IMQ The Netherlands: KEMA Norway: NEMKO Sweden: SEMKO Switzerland: SEV United Kingdom: BSI In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
PAGE 151
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The TOSHIBA International Warranty Satellite 2430 Series Appendix C The TOSHIBA International Warranty The TOSHIBA International Warranty is a service policy on the parts and repair on your TOSHIBA portable personal computer which is automatically available to purchasers of the computer. The cover is assured in major industrial countries of the world.
PAGE 152
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The TOSHIBA International Warranty TOSHIBA's Worldwide Computer Representatives Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road, North Ryde NSW 2113 Tel: +61-2-9887-3322 Fax: +61-2-9888-3664 http://www.isd.toshiba.com.au Austria Toshiba Europe GmbH Handelskai 388 1020 Wien Tel: +43-1-72031000 Fax: +43-1-72031002 http://www.toshiba.at Azerbaijan AZEL (Azerbaijan Electronics) Floor 5, 65 Fizuli Str.
PAGE 153
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The TOSHIBA International Warranty Tel: +36-1-467 6100 Fax: +36-1-252 6470 http://www.technotrade.hu Hungary Technotrade Kft. Öv u, 185, 1147 Budapest Ireland See 'United Kingdom' Israel Mafil Technologies (3000) Ltd 8 Bareket Street 49517 Petah Tikwa Tel: +972-3-918-3333 Fax: +972-3-924-1310 http://www.mafil.co.il Italy Progetto Elettronica 92 .S.p.
PAGE 154
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The TOSHIBA International Warranty Oman (Sultanate of Oman) Suhail&Saud Bahwan (SSB) Sarco Building, Ground Floor No. 459, Way No. 310 Al Noor Street, Ruwi 113 Muscat Tel: +968-790 117 Fax: +968-790 192 http://www.ssbcd.co.com Poland AC Serwis Sp. Z o. o. ul. Partyzantów 71, 43-316 Bielsko-Biala Tel: +48- 33-8130-205 Fax: +48- (33-8130-209 http://www.acserwis.com.pl Portugal Toshiba Information Systems Portugal Edificio D.
PAGE 155
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 The TOSHIBA International Warranty Turkey Bekom Bilgisayar Elekronik Komunikasyon Buyukdere Cad. Laie Ishani No. 62 K., 1 Mecidiyeköy, Istanbul Tel: +90 212 275 87 97 Fax: +90 212 275 8740 http://www.toshibatr.com Ukraine DKT-SERSO Lesya Ukrainka blv, 26 01133 Kiev Tel: +380-44-573-9627 Fax: +380-44-254-4646 http://www.dkt-cepco.com.ua United Arab Emirates Al-Futtaim Electronics P.O.
PAGE 156
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Satellite 2430 Series Appendix D Keyboard Layouts Arabic Belgian User's SatelliteManual 2430 Series D-1 D-1 ENGLISH using Euro_M.
PAGE 157
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Danish French German Satellite 2430 Series D-2 ENGLISH using Euro_M.
PAGE 158
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Greek Hebrew Italian Satellite 2430 Series D-3 ENGLISH using Euro_M.
PAGE 159
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Norwegian Polish Portuguese Satellite 2430 Series D-4 ENGLISH using Euro_M.
PAGE 160
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Russian Spanish Swedish Satellite 2430 Series D-5 ENGLISH using Euro_M.
PAGE 161
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts Swiss-German Turkish UK English Satellite 2430 Series D-6 ENGLISH using Euro_M.
PAGE 162
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Keyboard Layouts US English Satellite 2430 Series D-7 ENGLISH using Euro_M.
PAGE 163
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Display Controller and Modes Satellite 2430 Series Appendix E Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off.
PAGE 164
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Display Controller and Modes Video modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colours and refresh rates.
PAGE 165
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 If your computer is stolen Satellite 2430 Series Appendix F If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place.
PAGE 166
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 If your computer is stolen TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany +49 (0) 941 7807 925 Country stolen: Machine type: (e.g. Satellite 2430) Model number: (e.g. PS243E YXT) Serial number: (e.g. 70123456E) Date stolen: Warranty seal: (e.g.
PAGE 167
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Satellite 2430 Series Appendix G ASCII Character Codes This appendix shows the American Standard Code for Information Interchange (ASCII) on the following pages. The characters in the IBM char column appear on your display when you type the corresponding ASCII code (as described in Chapter 5, The Keyboard). The characters that are printed, however, depend on the software you are using.
PAGE 168
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Dec code Hex code 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F IBM char ♥ ♦ ♣ ♠ • !! ¶ § ↑ ↓ → ← ↔ ▲ ▼ Sort seq Ctrl char 000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 NUL SOH STX ETX EOT ENQ
PAGE 169
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Dec code Hex code IBM char Sort seq Dec code Hex code IBM char Sort seq 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F space ! “ # $ % & ’ ( ) * + , .
PAGE 170
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Dec code Hex code IBM char Sort seq Dec code Hex code IBM char Sort seq 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F ’ a b c d e f g h i j k l m n o p q r s t u v w x y z { 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111
PAGE 171
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Dec code Hex code IBM char Sort seq Dec code Hex code 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF á í ó ú ñ Ñ a o ¿ 65 73 79 85 78 78 166 167 63 169 170 171 172 33 34 34 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
PAGE 172
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 ASCII Character Codes Dec code Hex code IBM char 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF α ß Γ Π ∑ σ µ ϒ Φ Θ Ω δ ϕ φ Ε Λ Ξ ± ≥ ≤ ⌠ ⌡ ÷ ≈ Sort seq 83 ° √ η 2 Satellite 2430 Series G-6 ENGLISH using Euro_M.
PAGE 173
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Satellite 2430 Series Appendix H AT Commands In most cases, you will not need to type AT commands manually. However, there might be some occasions when you will need to do so. This chapter describes AT commands for data mode. Fax and voice commands are taken care of by application software. The format for entering AT commands is: ATXn where X is the AT command, and n is the specific value for that command.
PAGE 174
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands A/ Repeat last command This command repeats the last command string entered. Do not precede this command with an AT prefix or conclude it by pressing Enter. A Answer command This command instructs the modem to go off-hook and answer an incoming call. Refer to the section Country select command and S-register in Appendix I for country-specific codes.
PAGE 175
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Dn Dial This command instructs the modem to dial a telephone number. Enter n (the telephone number and any modifiers) after the ATD command. Any digit or symbol (0-9, *, #, A, B, C, D) may be dialled as touch-tone digits. Characters such as spaces, hyphens, and parentheses do not count. They are ignored by the modem, but you may want to include them to make the number and modifiers easier to read.
PAGE 176
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Hn Hook control This command instructs the modem to go on-hook to disconnect a call, or off-hook to make the phone line busy. H0 Modem goes on-hook (default). H1 Modem goes off-hook. Result Codes: OK n=0,1 ERROR Otherwise In Request ID information This command displays product information about the modem. I0 Returns device information. I1 Calculates ROM checksum and displays it on the DTE.
PAGE 177
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Nn Modulation handshake This command controls whether or not the local modem performs a negotiated handshake at connection time with the remote modem when the communication speed of the two modems is different. N0 When originating or answering, this is for handshake only at the communication standard specified by S37 and the ATB command.
PAGE 178
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Qn Result code control Result codes are informational messages sent from the modem and displayed on your monitor. Basic result codes are OK, CONNECT, RING, NO CARRIER, and ERROR. The ATQ command allows the user to turn result codes on or off. Q0 Enables modem to send result codes to the computer (default). Q1 Disables modem from sending result codes to the computer.
PAGE 179
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Xn Result code selection, call progress monitoring This command sets detection options for dial tones and busy signals, which is its primary function. It also, however, enables or disables extended result codes. Refer to table H-1 for country-specific codes.
PAGE 180
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Zn Recall stored profile The modem performs a soft reset and restores (recalls) the configuration profile according to the parameter supplied. If no parameter is specified, zero is assumed. Either Z0 or Z1 restores the profile.
PAGE 181
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands &F Load factory settings This command loads the configuration stored and programmed at the factory. This operation replaces all of the command options and the S-register settings in the active configuration with factory values. &F Recall factory setting as active configuration. &Gn V.22bis guard tone control This command determines which guard tone, if any, to transmit while transmitting in the high band (answer mode).
PAGE 182
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands &Tn Self-test commands These tests can help to isolate problems if you experience periodic data loss or random errors. &T0 Abort. Stops any test in progress. &T1 Local analogue loop. This test verifies modem operation, as well as the connection between the modem and computer. Any data entered at the local DTE is modulated, then demodulated, and returned to the local DTE. To work properly, the modem must be off-line.
PAGE 183
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Option Selection AT Command Flow Control Hardware &K Error Control Mode V.42, MNP, Buffer \N Data Compression Enable %C Auto AnswerRing# 0 S0 AT Escape Char 43 S2 CarriageRtn Char 13 S3 Linefeed Char 10 S4 Backspace Char 8 S5 Blind Dial Pause 2 sec. S6 No Answer Timeout 50 sec. S7 “,” Pause Time 2 sec. S8 No Carrier Disc 2000 msec. S10 DTMF Dial Speed 95 msec.
PAGE 184
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands &W Store current configuration Saves the current (active) configuration (profile), including S-Registers. The current configuration comprises a list of storable parameters illustrated in the &V command. These settings are restored to the active configuration upon receiving a Zn command or at power up. Refer to the &V command. &W Stores the current configuration.
PAGE 185
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands \Qn Local flow control selection \Q0 Disable flow control. \Q1 XON/XOFF software flow control. \Q3 CTS/RTS to DTE (default). Result Codes: OK n=0,1,3 ERROR Otherwise \Vn Protocol result code Disable protocol result code appended to DCE speed. Enable protocol result code appended to DCE speed (default).
PAGE 186
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Table H-1: AT commands that vary according to country regulations ATA ATDP/ATP/ &P AT%B (10PPS) ATS0 Australia Normal Enable Disable 0 to 255 Austria If S1 is not 0, then active Enable Enable 0 and 2 to 6 Belgium Normal Enable Enable 0 and 2 to 6 Denmark Normal Disable Disable 0 and 2 to 6 Finland Normal Enable Disable 0 and 2 to 6 France If S1 is not 0, then active Enable Enable 0 and 2 to 6 Germ
PAGE 187
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 AT Commands Table H-1: AT commands that vary according to country regulations ATS11 AT&P (20PPS) ATS6 ATS8 ATS91 ATX Australia Fixed (85) Disable 12 4 10 Normal Austria Fixed (85) Disable 4 4 10 Normal Belgium Fixed (85) Disable 12 4 10 Always dial tone detect Denmark Fixed (85) Disable 4 4 10 Always dial tone detect Finland Fixed (85) Disable 4 4 10 Always dial tone detect France Fixed (85) Disable
PAGE 188
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers Satellite 2430 Series Appendix I S-registers S-registers contain the settings that determine how a number of functions of the internal modem operate. For example, how many times to let the telephone ring before the modem answers and how long to wait before it hangs up if a connection fails. You can also customise certain AT commands such as the escape sequence and command line termination.
PAGE 189
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers S0 Auto answer ring number This register determines the number of rings the modem will count before automatically answering a call. Enter 0 (zero) if you do not want the modem to automatically answer at all. When disabled, the modem can only answer with an ATA command. Range: (0-255) or (0 or 2 to 6) depending on the country Default: 0 Units: rings S1 Ring counter This register is read only.
PAGE 190
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers S4 Response formatting character (user defined) This register determines the ASCII value used as the line feed character. The modem uses a line feed character in command mode when it responds to the computer. Range: 0-127, ASCII decimal Default: 10 (line feed) Units: ASCII S5 Command line editing character (user defined) This register sets the character recognised as a backspace and pertains to asynchronous only.
PAGE 191
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers S7 Connection completion time-out This register sets the time, in seconds, that the modem must wait before hanging up because carrier is not detected. The timer is started when the modem finishes dialling (originate), or goes off-hook (answer). In originate mode, the timer is reset upon detection of an answer tone if allowed by county restriction.
PAGE 192
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers S12 Escape guard time This register sets the value (in 20 ms increments) for the required pause after the escape sequence (default 1 s). Range: 0-255 Default: 50 Units: .
PAGE 193
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers AT command set result codes The following table shows the result codes.
PAGE 194
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 S-registers Result Code Numeric Description DELAYED*2 88 Delay is in effect for the dialled number BLACKLISTED*2 89 Dialled number is blacklisted BLACKLIST FULL*2 90 Blacklist is full *1: EC only appears when the Extended Result Codes configuration option is enabled. EC is replaced by one of the following symbols, depending upon the error control method used: V.42bis - V.42 error control and V.42bis data compression. V.42 - V.
PAGE 195
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 V.90 Satellite 2430 Series Appendix J V.90 The Toshiba internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90. As with any modem, the actual throughput (speed of data transfer) depends on analogue telephone line conditions, which can vary considerably.
PAGE 196
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 V.90 Result codes for a V.90 connection No.
PAGE 197
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 V.90 AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect. -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection maximum modem speed (default) Satellite 2430 Series J-3 ENGLISH using Euro_M.
PAGE 198
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Wireless LAN Satellite 2430 Series Appendix K Wireless LAN This appendix describes Wireless LAN features and TOSHIBA Wireless LAN card specifications. For details on Wireless LAN settings, refer to the LAN Card Settings and Client Manager help file. These references have the latest information.
PAGE 199
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Wireless LAN Power Characteristic Doze Mode 45mA Receive Mode 250mA Transmit Mode 350mA Power Supply 3.3V Networking Characteristics Compatibility IEEE 802.11 Standard for Wireless LANS (DSSS) Wi-Fi (Wireless Fidelity) certified by the Wireless Ethernet Compatibility Alliance (WECA) Network Operating System Microsoft Windows® Networking Host Operating System Microsoft Windows® XP: ■ NDIS5.
PAGE 200
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Wireless LAN Radio characteristics R-F Frequency Band 2.4GHz (2400-2483.5 MHz) Modulation Technique Direct Sequence Spread Spectrum ■ CCK for High & Medium Transmit Rate ■ DQPSK for Standard Transmit Rate ■ DBPSK for Low Transmit Rate Spreading 11-chip Barker Sequence Bit Error Rate (BER) Better than 10-5 Nominal Output Power 15 dBm High Speed Medium Speed Standard Speed Low Speed 11 Mb/s 5.
PAGE 201
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Wireless LAN Supported frequency sub-bands Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 2.4 GHz channels (see following table). Consult your Authorised Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region. Wireless IEEE 802.11 Channels Sets Frequency Range 2400-2483.
PAGE 202
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Internal Modem Guide Satellite 2430 Series Appendix L Internal Modem Guide This appendix describes how to install and the remove the internal modem. Do not remove the base cover except to remove or install the internal modem or to check the PTT label. Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described.
PAGE 203
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Internal Modem Guide Installing the modem board To install the modem board and jack, follow the steps below. 1. Turn the computer upside down. 2. Remove two screws securing the modem socket cover. 3. Lift off the modem socket cover. 4. Connect the modem cable to the modem board. 5. Remove two screws from the modem board socket. 6. Align the connectors and seat the modem board. 7. Secure the modem board with the two screws removed in step 5.
PAGE 204
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary Satellite 2430 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. A adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
PAGE 205
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary asynchronous: Lacking regular time relationship. As applied to computer communications, asynchronous refers to the method of transmitting data that does not require a steady stream of bits to be transmitted at regular time intervals. AUTOEXEC.BAT: A batch file that executes a series of MS-DOS commands and programs each time you start the computer. This is no longer necessarily used when booting Windows NT 4.0 and higher.
PAGE 206
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels.
PAGE 207
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary commands: Instructions you enter at the terminal keyboard that direct the actions of the computer or its peripheral devices. communications: The means by which a computer transmits and receives data to and from another computer or device. See parallel interface; serial interface.
PAGE 208
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary D data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte. If data bits = 7 the computer can generate 128 unique characters. If data bits = 8 the computer can generate 256 unique characters. data: Information that is factual, measurable or statistical that a computer can process, store, or retrieve. DC: Direct Current. Electric current that flows in one direction.
PAGE 209
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary E echo: To send back a reflection of the transmitted data to the sending device. You can display the information on the screen, or output it to the printer, or both. When a computer receives back data it transmitted to a CRT (or other peripheral device) and then retransmits the data to printer, the printer is said to echo the CRT. EGA: Enhanced Graphics Adaptor.
PAGE 210
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary G gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. GND: Ground. An RS-232C signal used in the exchange of data between a computer and serial device. graphics: The use of drawings, pictures, or other images, such as charts or graphs, to present information. H hard disk drive (HDD): An electromechanical device that reads and writes a hard disk. See also hard disk.
PAGE 211
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary I I/O devices: Equipment used to communicate with the computer and transfer data to and from it. I/O: Input/output. Refers to acceptance and transfer of data to and from a computer. icon: A small graphic image displayed on the screen or in the indicator panel. In Windows, an icon represents an object that the user can manipulate. i.
PAGE 212
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
PAGE 213
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary M magiCDisc: A TOSHIBA utility that lets you create a CD-ROM data base for quick access to CD-ROM data. main board: See motherboard. maths co-processor: A circuit built into the processor that is dedicated to intensive math calculations. MDA: Monochrome Display Adaptor.
PAGE 214
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary N non-system disk: A formatted diskette (floppy disk) you can use to store programs and data but you cannot use to start the computer. See system disk. non-volatile memory: Memory, usually read-only (ROM), that is capable of permanently storing information. Turning the computer’s power off does not alter data stored in non-volatile memory.
PAGE 215
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary P parallel interface: Refers to a type of information exchange that transmits information one byte (8 bits) at a time. See also serial interface. parallel: Refers to two or more processes or events that can occur simultaneously, and without interfering with each other. See also serial. parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1.
PAGE 216
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
PAGE 217
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary S SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. serial communications: A communications technique that uses as few as two interconnecting wires to send bits one after another. serial interface: Refers to a type of information exchange that transmits information sequentially, one bit at a time. Contrast: Parallel interface.
PAGE 218
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Glossary T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data input/output. TFT: A colour LCD technology that applies individual transistors to each pixel enabling fine display control and excellent screen legibility. touch pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic.
PAGE 219
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Index Satellite 2430 Series Index 3 C 3 ½, 2-12 CD care, 4-12 CD/DVD Play, Digital Audio Play buttons, 4-9 CD-RW/DVD-ROM drive, 2-2, 2-13 problems, 8-8 CDs writing, 4-10 Certification, A-3 Certification agencies, B-1 Chip Set, 1-3 Cleaning the computer, 4-21 Compact discs care, 4-12 Computer cleaning, 4-21 moving, 4-21 A AC adaptor, 2-14 additional, 7-9 connecting, 3-5 ASCII characters, 5-8, G-1 B Battery, 2-7 battery pack, 6-3 care an
PAGE 220
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Index DVD-RAM drive problems, 8-11 E Environmental Requirements, A-1 Equipment setup computer placement, 3-2 general conditions, 3-2 Ergonomics lighting, 3-4 seating and posture, 3-3 work habits, 3-4 Expansion Memory Socket, 2-7 External monitor, 7-10 External Monitor Port, 2-6 F Fn + Esc (sound mute), 5-4 Fn + F1 (instant security), 5-4 Fn + F2 (power save mode), 5-4 Fn + F4 (hibernation), 5-4 Fn + F5 (display selection), 5-5 Fn + F6 (dis
PAGE 221
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Index N Numeric keypad, 5-6 O Options, 1-10 P Panel power on/off, 6-13 Parallel Port, 2-6 Parallel printer, 7-9 PC Card, 1-4, 2-4 PC cards, 7-2 installing, 7-2 removing, 7-3 Ports, 1-5 DC IN 19V, 2-6 External Monitor Port, 2-6 Headphone Jack, 2-3 i.
PAGE 222
Satellite 2430 Series Version 1 Last Saved on 04/04/2003 13:35 Index S T ScrLock (Fn + F12), 5-3 SD Card, 2-5 SD cards, 7-4 Security, 1-6 Lock, 2-3 Security lock, 7-14 SelectBay, 1-6 changing modules, 4-3 Self Test, 8-4 Setting up, 3-1 Soft keys, 5-2 emulating enhanced keyboard Enter, 5-3 numeric mode, 5-3 right Ctrl key, 5-3 ScrLock, 5-3 Soft Keys Alt Gr Key Combinations, 5-2 Sound system problems, 8-15 Specifications, A-1 Standby mode, 3-10 System automatic Standby/Hibernation, 6-13 System Indicator