® Satellite A110/A115 Series Resource Guide Keep this guide in a convenient place to access important information about your computer. If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.
Contents Introduction ...................................................................................... 25 Setting up your computer and getting started................................... 26 Your computer’s TFT display ............................................................. 37 Inserting a PC Card........................................................................... 37 Removing a PC Card......................................................................... 38 Learning the basics.........
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Model: Satellite® A110/A115 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available.
Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ ❖ This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Contact either: ❖ ❖ Toshiba’s Support Web site at pcsupport.toshiba.com.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures.
any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. 3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.
recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
VCCI Class B Information Modem Warning Notice Conformity Statement The equipment has been approved to [Commission Decision “CTR-21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
Using this Equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station). 1. Sticker Please put the following sticker on devices incorporating this product.
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.
Luxembourg Norway Switzerland Netherlands Portugal UK New Zealand Sweden USA Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
802.
❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device.
Approved Countries/Regions for use for the Intel® PRO/Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Approved Countries/Regions for use for the INPROCOMM IPN2220 Wireless Network Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Bluetooth® Wireless Technology and Your Health The products with Bluetooth® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Regulatory statements This product complies with any mandatory product specification in any country/region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly. Canada — Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
1. Sticker Please put the following sticker on devices incorporating this product. The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory product lines (Other Radio Stations). 1.
The following restrictions apply: ❖ ❖ Do not disassemble or modify the device. Do not install the embedded wireless module into other device. Optical Drive Safety Instructions The HD DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Never attempt to disassemble, adjust or repair a HD DVD, CD/DVD drive, CD-RW drive, Multi-drive or any other optical drive.
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2006 by Toshiba America Information Systems, Inc. All rights reserved. Export Administration Regulation This document contains technical data that may be controlled under the U.S.
Trademarks Satellite is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. DirectX, Active Desktop, DirectShow, and Windows Media are registered trademarks of Microsoft Corporation. ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Introduction 25 Introduction Welcome to the world of powerful and portable multimedia computers! Some software may differ from its retail version (if available), and may not include user manuals or all program functionality. This guide This guide offers important information about your computer, including solutions to the most common problems, and features and specifications.
Setting up your computer and getting started Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon highlights technical information about the computer. HINT: This icon denotes helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text. Other documentation Your computer comes with the following documentation in addition to this resource guide: ❖ An electronic version of the user’s guide.
Setting up your computer and getting started 27 Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1. Turn off the computer. 2. Disconnect the AC adaptor from the power plug socket and computer. 3. Remove the battery pack.
Setting up your computer and getting started Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computer’s battery. Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.
Setting up your computer and getting started 29 To connect AC power to the computer: 1 Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. _ + 2 Plug the AC adaptor into the DC-IN on the back of the computer.
Setting up your computer and getting started Connecting a printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a printer.
Setting up your computer and getting started 31 Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. Additional memory modules can be installed in the memory module slots on the base of the computer.
Setting up your computer and getting started 5 Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Front of computer (Sample Illustration) Locating the memory module slot cover 6 Using a small Phillips screwdriver, unscrew the screw that secures the memory module slot cover. Front of computer (Sample Illustration) Unscrewing the memory module slot cover 7 Remove the memory module slot cover.
Setting up your computer and getting started 33 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 10 Locate an empty memory slot.
Setting up your computer and getting started 12 Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the module in the socket 13 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Setting up your computer and getting started 35 Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Memory slots Front of computer (Sample Illustration) Inserting the memory module into the slot 14 Replace the memory module slot cover and secure it using the screw. 15 Re-insert the main battery. For information on inserting the main battery, see “Inserting a charged battery” on page 49.
Setting up your computer and getting started Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.
Your computer’s TFT display 37 Your computer’s TFT display Small bright dots may appear on your screen display when you turn on your PC. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate.
Removing a PC Card Removing a PC Card Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the PC Card device. If the card can be removed now, the system displays Safe To Remove Hardware. 1 Locate the PC Card eject button next to the PC Card slot. 2 Press the PC Card eject button once to pop it out slightly, then push it in to remove the PC Card. The PC Card ejects slightly from the slot.
Using the TouchPad™ 39 Using the TouchPad™ The TouchPad™, the small, smooth, square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: ❖ To move the cursor to the top of the page, push your finger forward on the TouchPad. ❖ To move the cursor to the bottom of the page, drag your finger toward yourself.
Using the optical drive The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button (“right-clicking”). Check your program’s documentation to determine whether it uses the right mouse button. Using the optical drive Optical storage has become the preferred medium for software, music, and video.
Using the optical drive 41 Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Using the optical drive Power is off or the computer is The system accesses the Internet. in Hibernation mode and you press the Internet button Operating system is running or The system accesses the Internet. the computer is in Standby mode and you press the Internet button The CD/DVD button activates a media playing application that can play audio CDs or DVD movies when the computer is powered off. The following chart describes the CD/DVD button functionality.
Using the optical drive 43 Inserting a compact disc Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing. To insert a compact disc into the drive: 1 Make sure the computer is turned on. 2 Make sure the drive’s in-use indicator light is off. 3 Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch).
Using the optical drive 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Removing a disc with the computer on To remove a compact disc (CD or DVD) with the computer turned on: 1 Press the eject button on the drive.
Moving the computer 45 Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive indicator light stops glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the system.
Mobile computing The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off. TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached. The RTC battery charges only while the computer is powered on.
Mobile computing 47 TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adaptor to run applications, features, and devices, the recharging of the battery cannot occur. Your computer's Power Saver utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge. Setting battery alarms Your computer can be configured to warn you when the battery is running low.
Mobile computing 3 Unplug and remove any cables connected to the computer, including the AC adaptor. 4 Close the display panel and turn the computer upside down. 5 Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock 6 Slide the battery release latch to release the battery. 7 Pull the discharged battery out of the computer.
Taking care of your battery 49 Inserting a charged battery To insert a battery: 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until the latch clicks. The battery has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.
Taking care of your battery ❖ ❖ ❖ ❖ ❖ ❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.
Taking care of your battery 5 ❖ ❖ ❖ ❖ ❖ 51 Charge the battery pack until the battery light glows blue. If you have extra battery packs, rotate their use. If you will not be using the system for an extended period, more than one month, remove the battery pack. Disconnect the AC adaptor when the battery is fully charged. Overcharging makes the battery hot and shortens its life. If you are not going to use the computer for more than eight hours, disconnect the AC adaptor.
If something goes wrong Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. If something goes wrong Problems that are easy to fix Your program stops responding. If you are working with a program that suddenly freezes all operations, chances are the program has stopped responding.
If something goes wrong 53 If you are connected to a domain server: 1 Click Start, Shut down. The Shut Down window appears. 2 Click Shut down from the drop-down list. 3 Click OK. The computer shuts down completely. Your program performs an illegal operation. If you receive the message, “Your program has performed an illegal close the window and continue working. If it happens again, record the details of the message and consult the software manufacturer.
If something goes wrong If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. Verify that the computer is on by looking at the on/off indicator. If the indicator is glowing, the computer is on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
If something goes wrong 55 You may have activated the instant password feature by pressing Fn and F1 simultaneously. If you have registered a password, press any key, type the password and press Enter. If no password is registered, press any key. The screen reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press Fn and F5 simultaneously (once).
If something goes wrong PC Card problems PC Card checklist ❖ Make sure the card is inserted properly into the slot. See “Using PC Cards” in the electronic user’s guide for information about how to insert PC Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine. If the card malfunctions again, it may be defective.
If you need further assistance 57 Since all PC Cards share the same socket, each card is not required to have its own address. If you need further assistance If you have followed the recommendations in this section and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help.
Power cord/cable connectors Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s serial number ❖ The computer and any optional devices related to the problem ❖ Backup copies of your Windows® operating system and all other preloaded software on your choice of media ❖ Name and version of the program involved in the problem along with its installation media ❖ Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For tec
Features and specifications 59 Features and specifications This section lists the computer’s features. Numbered legal footnotes may also be found on page 65. Product Series1 The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, visit Toshiba's Web site at pcsupport.toshiba.com.
Features and specifications - use of certain multimedia, computer generated graphics or video applications - use of standard telephone lines or low speed network connections - use of complex modeling software, such as high end computer aided design applications - use of several applications or functionalities simultaneously - use of computer in areas with low air pressure (high altitude >1,000 meters or >3,280 feet above sea level) - use of computer at temperatures outside the range of 5° C to 30° C (4
Features and specifications 61 Power Main battery Removable, rechargeable Lithium-Ion (Li-Ion) high-capacity 4 battery (14.4V x 4000 mAh, 6-cell)* Battery recharge time is several hours* 4 *Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components.
Features and specifications Ports S-video out port Lets you play DVD video on a projector or TV that accepts Svideo inputs DC-IN Lets you connect the computer to AC power, using the AC adaptor and power cord/cable Headphone jack Use the 3.5-mm headphone jack to connect stereo headphones or other audio output devices. Microphone jack Use the 3.
Features and specifications Display 63 15.4-inch WXGA (measured diagonally) active matrix Thin Film Transistor (TFT) color LCD displays up to 16 million 7 colors at 1280 x 800* Available configurations are: normal and TruBrite (High Brightness). *Small bright dots may appear on your screen display when you turn on your PC. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology.
Features and specifications DVD SuperMulti 9 drive* READ: CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM Maximum speed and compatibility: CD-ROM (24x), CD-R (24x), CD-RW (10x), DVD-ROM (8x), DVD-R (single layer)(8x), DVD-R (double layer)(2x), DVD-RW (4x), DVD+R (single layer)(8x), DVD+R (double layer)(2.4x), DVD+RW (4x), DVD-RAM (5x) *Due to manufacturing and quality variations in third party optical media (e.g.
Legal Footnotes 65 Legal Footnotes 1. 2. 3. Product Series The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, visit Toshiba's Web site at pcsupport.toshiba.com.
Legal Footnotes 4. 5. 6. 7. 8. Battery Life Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See “Detailed Specs” for specific battery measurement test.
Legal Footnotes 9. 67 Optical Media Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or playback optical media recorded by other PCs or optical media recorders. Additionally, certain optical media recorded on your optical drive may not playback or operate properly on other PCs or optical media players.
Index A D AC adaptor 28 AC power light 28 alarms low battery 47 DC-IN 29 display problems screen is blank 54 B eject button optical drive 40 error messages program has performed an illegal operation 53 E backing up files 38 battery alarms 47 changing 47 installing 47, 49 real-time clock (RTC) 46 removing 47 built-in features 59 buttons eject, optical drive 40 media control 41 TouchPad control 39 C CD/DVD inserting 43 CD/DVD button functionality 41 changing main battery 47 computer moving 45 sett
removing 47 media control buttons 41 memory module installing 30 inserting into socket 33 removing 35 memory module slot 31 removing cover 32 monitor problems monitor not working 55 moving the computer 45 O optical drive inserted 56 computer will not start 53 contacting Toshiba 57 display is blank 54 external monitor 55 illegal operation 53 keyboard not responding 54 keyboard produces unexpected characters 54 PC Card checklist 56 PC Card slot appears dead 56 program not responding 52 processor, specifi
standard hardware 62 storage capacity 61 wireless communication 64 standard hardware, specifications 62 storage capacity specifications 61 T tips on computing 38 Toshiba Accessories information 30 TouchPad using 39 W Web sites 57 wireless communication 64 wireless interoperability 8 RG 5.375 x 8.375 ver 2.3.
RG 5.375 x 8.375 ver 2.3.
PMA500332010 05/06 RG 5.375 x 8.375 ver 2.3.