- TOSHIBA Portable Personal Computer User's Manual

9-13
T
ROUBLESHOOTING
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROMXA Mode 2 (Form1,
Form2), Enhanced CD(CD-EXTRA),
CD-G(Audio CD only), Addressing
Method 2
Check the region code on the DVD. It must match
that on the DVD-R/-RW drive. Region codes are
listed in the
Optical media
section in Chapter 2,
The Grand Tour
.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions :
Use only media recommended by TOSHIBA.
Do not use the mouse or keyboard during
writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during writing.
Do not jar the computer during writing.
Do not connect/ disconnect external devices or
install/ remove internal cards during writing.
If problems persist, contact your dealer.
DVD +-R/+-RW drive
For more information, refer to Chapter 4, Operating Basics.
Problem Procedure
You cannot access Make sure the drive’s drawer is securely closed.
a CD/DVD in the Press gently until it clicks into place.
drive
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
Hardware and system checklist