Manuel de l'utilisateur C50/C50D/C55/C55D
Table des matières Chapitre 1 Mentions légales TOSHIBA Copyright, responsabilités et marques ............................................... 1-1 Règlements ............................................................................................ 1-2 Avis concernant les normes vidéos .................................................... 1-7 Questions relatives aux licences de OpenSSL Toolkit ...................... 1-7 Programme ENERGY STAR® .............................................................
Ecran externe ....................................................................................... 4-37 Prise de sécurité .................................................................................. 4-40 Accessoires TOSHIBA en option ....................................................... 4-40 Système audio et mode vidéo ............................................................ 4-41 Chapitre 5 Utilitaires et fonctions avancées Utilitaires et applications ........................................
Chapitre 1 Mentions légales TOSHIBA Le présent chapitre regroupe les remarques légales et de sécurité qui s'appliquent aux ordinateurs TOSHIBA. Copyright, responsabilités et marques Copyright © 2013 par TOSHIBA Corporation. Tous droits réservés. Selon la loi du Copyright, le présent manuel ne peut pas être reproduit, sous quelque forme que ce soit, sans l'autorisation écrite préalable de TOSHIBA.
AMD, le logo « flèche » d'AMD, PowerPlay, Vari-Bright et les combinaisons de ces derniers sont des marques commerciales d'Advanced Micro Devices, Inc. Windows, Microsoft et le logo Windows sont des marques déposées de Microsoft Corporation. Le mot, la marque et les logos Bluetooth® sont des marques déposées de Bluetooth SIG, Inc. et toute utilisation de ces marques par Toshiba Corporation et ses affiliés se font sous licence.
Réorienter ou déplacer l'antenne de réception ; Éloigner l'équipement du poste de réception ; Brancher l'équipement sur une prise appartenant à un circuit différent de celui du poste de réception ; Consulter le revendeur ou un technicien radio/TV qualifié. Seuls des périphériques conformes aux limites définies par la classe B de la FCC peuvent être connectés à cet équipement.
Homologation CE Ce produit porte la marque CE conformément aux directives européennes, notamment la directive RoHS 2011/65/EU, ETRT (équipements terminaux de radio et de télécommunications connectés) 1999/5/EC, directive Écoconception 2009/125/EC (ErP) et les mesures d'implémentation correspondantes. Le présent produit et les options d’origine ont été conçus pour respecter les normes EMC (compatibilité électromagnétique) et de sécurité.
En outre, pour des raisons de sécurité, l’utilisation du présent produit dans une atmosphère comportant des gaz explosifs est interdite. Informations spécifiques aux pays de l'Union Européenne Mise au rebut des produits Le symbole de poubelle barrée indique que le produit et ses composants ne doivent pas être jetés avec les déchets ménagers. Les piles, les batteries et les accumulateurs peuvent être mis au rebut en même temps que le produit. Ils seront triés dans les centres de recyclage.
La présence de ces symboles varie selon le pays et la zone d'achat. REACH - Déclaration de conformité Les nouveaux règlements de l'Union Européenne (EU) concernant les produits chimiques, REACH (Enregistrement, évaluation, autorisation et restriction des substances chimiques), sont entrés en vigueur le 1er juin 2007.
La présence de ces symboles varie selon le pays et la zone d'achat.
2. 3. 4. 5. 6. La redistribution sous forme binaire doit reproduire dans la documentation et/ou les autres éléments de la distribution les notices de copyright ci-dessus, la présente liste de conditions, ainsi que le dédit de garanties ci-dessous. Tous les documents promotionnels mentionnant les fonctionnalités ou l’utilisation de ce logiciel doivent comporter le crédit suivant : « Ce produit contient des logiciels développés par le projet OpenSSL et destinés à être utilisés dans OpenSSL Toolkit.
Tous droits réservés. Ce progiciel implémente SSL et a été écrit par Eric Young (eay@cryptsoft.com). Cette implémentation a été écrite pour des raisons de conformité avec Netscape SSL. Cette bibliothèque est gratuite pour les utilisations commerciales ou non commerciales à condition de respecter les conditions suivantes. Ces conditions s'appliquent à tous les codes qui figurent dans cette version de distribution, qu'il s'agisse du code RC4, RSA, lhash, DES, etc. ou du code SSL.
INDIRECT, ACCESSOIRE, SPÉCIAL, EXEMPLAIRE OU CONSÉCUTIF (Y COMPRIS, ENTRE AUTRES, ACQUISITION DE BIENS OU SERVICES DE SUBSTITUTION ; PERTE D'UTILISATION, DE DONNÉES OU DE PROFITS, OU INTERRUPTION D'ACTIVITÉ) QUELLE QU'EN SOIT LA CAUSE ET SELON QUELQUE THÉORIE DE RESPONSABILITÉ QUE CE SOIT, QUE CE SOIT DE MANIÈRE CONTRACTUELLE, DE RESPONSABILITÉ STRICTE, OU TORT (Y COMPRIS NÉGLIGENCE OU TOUTE AUTRE CAUSE) SURVENANT D'UNE MANIÈRE QUELCONQUE DE L'UTILISATION DE CE LOGICIEL, MÊME S'ILS ONT ÉTÉ AVERTIS DE LA POS
Mise au rebut de l'ordinateur et de ses batteries Si vous devez mettre l'ordinateur au rebut, prenez connaissance des lois et règlements en vigueur. Pour plus d'informations, contactez votre administration locale. L'ordinateur contient des batteries rechargeables. Lors d'un usage prolongé, les batteries perdent leur capacité de rétention de la charge et doivent être remplacée. Dans certaines collectivités locales, il peut être illégal de mettre les batteries dans une poubelle ordinaire.
Précautions d'emploi AVERTISSEMENT : Cet appareil contient un système laser classé comme « PRODUIT LASER DE CLASSE 1 ». Afin d'utiliser ce modèle correctement, lisez attentivement le manuel d'instructions et conservez-le. En cas de problème avec ce modèle, contactez le centre d’ assistance AGRÉÉ le plus proche. N'ouvrez sous aucun prétexte le boîtier, en raison du risque d'exposition au rayon laser.
Mise en place d'un environnement de travail adapté Installez l'ordinateur sur un support plat suffisamment large pour recevoir ce dernier, ainsi que tous les périphériques requis, telle une imprimante. Conservez un espace suffisant autour de l'ordinateur et des autres équipements, afin de garantir une bonne ventilation. Sinon, il risque de surchauffer.
Pressions et impacts L'ordinateur ne doit subir aucune forte pression ni aucun choc violent. Les pressions et chocs extrêmes peuvent endommager les composants de l'ordinateur ou entraîner des dysfonctionnements. Nettoyage de l'ordinateur Afin d'assurer une utilisation prolongée et sans problème, protégez votre ordinateur contre la poussière et évitez d'en approcher tout liquide. Ne renversez pas de liquide sur l'ordinateur.
Ne transportez pas l'ordinateur en le tenant par les aspérités. Téléphones portables L'utilisation de téléphones portables peut causer des interférences avec le système audio. Les autres fonctions de l'ordinateur ne sont pas affectées, mais il est recommandé de ne pas utiliser un téléphone portable à moins de 30 cm de l'ordinateur.
Chapitre 2 Prise en main Vous trouverez, dans ce chapitre, une liste de vérification de l'équipement et des instructions de base permettant d'utiliser votre ordinateur. Certaines fonctions décrites dans ce manuel risquent de ne pas fonctionner correctement si vous utilisez un système d'exploitation autre que celui installé par TOSHIBA. Liste de contrôle de l'équipement Déballez l'ordinateur avec précaution. Conservez le carton et l'emballage pour une utilisation ultérieure.
Clic Appuyez sur le TouchPad ou cliquez une fois sur la commande de gauche de TouchPad. Cliquez une fois avec le bouton gauche de la souris. Appuyez une fois sur l'écran tactile (modèles avec écran tactile uniquement). Clic-droit Cliquez une fois sur le bouton droit du TouchPad. Cliquez une fois avec le bouton droit de la souris. Appuyez de façon prolongée sur l'écran tactile (modèles avec écran tactile uniquement).
de douleurs et blessures au niveau des mains, des bras, des épaules et du cou. Vous trouverez dans cette section toutes les informations de base permettant de commencer à travailler avec votre ordinateur. Les sujets suivants sont traités : Connexion de l'adaptateur secteur Ouverture de l'écran Mise sous tension Configuration initiale Prise en main de Windows Installez un programme antivirus et assurez-vous que ce dernier est mis à jour de façon régulière.
Ne branchez jamais l'adaptateur secteur sur une prise de courant dont les caractéristiques de tension et de fréquence ne correspondent pas à celles spécifiées sur l'étiquette réglementaire de l'appareil, Sinon, vous risquez de provoquer un incendie ou une électrocution, ce qui risquerait d'entraîner des blessures graves. Achetez uniquement des câbles d'alimentation qui sont conformes aux spécifications de tension et de fréquence dans le pays d'utilisation.
Illustration 2-2 Connexion du cordon d'alimentation à l'adaptateur (prise à 3 fiches) L'ordinateur est livré avec un cordon à 2 ou 3 broches selon le modèle. 2. Raccordez la prise de sortie en courant continu de l'adaptateur au port Entrée adaptateur 19 V de la tablette. Illustration 2-3 Branchement de l'adaptateur secteur sur l'ordinateur 1 2 1. Prise entrée adaptateur 19 V 3. 2. Prise de sortie c.c.
N'ouvrez pas l'écran trop grand de façon à ne pas forcer les charnières et endommager son panneau. N'appuyez pas sur l'écran. Ne soulevez pas l'ordinateur par son écran. Ne rabattez pas l'écran si un stylo ou tout autre objet risque de se trouver pris entre l'écran et le clavier.
Configuration initiale L'écran de démarrage de Windows 8 s'affiche lorsque vous démarrez l'ordinateur. Suivez les instructions affichées par les différents écrans pour installer correctement le système d'exploitation. Lisez attentivement l'écran des modalités de licence. Prise en main de Windows Pour plus de détails sur les nouveautés et l'utilisation de Windows 8, consultez l'aide et l'assistance de Windows.
Périphériques Cette icône permet de gérer les périphériques matériels. Paramètres Cette icône permet de gérer les paramètres système. Vignettes Les vignettes sont accessibles et lancées à partir du menu Démarrer. Les vignettes types sont les vignettes Bureau et Messagerie, ainsi que les vignettes représentant les autres applications téléchargées sur votre système.
Ne remettez pas immédiatement sous tension l'ordinateur ou ses périphériques. Attendez un court laps de temps pour éviter tout dommage potentiel. Redémarrage de l'ordinateur Sous certaines conditions, il peut être nécessaire de redémarrer l’ordinateur, par exemple si : Vous changez certains paramètres du système. Vous disposez de deux possibilités pour redémarrer l'ordinateur : Dans la barre Paramètres, cliquez sur Marche/Arrêt, puis sélectionnez Redémarrer.
Lorsque l'adaptateur secteur est connecté, l'ordinateur se met en veille conformément aux options d'alimentation (pour y accéder, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Panneau de configuration -> Système et sécurité -> Options d'alimentation. Pour rétablir le fonctionnement normal de l'ordinateur lorsque ce dernier est en veille, appuyez brièvement sur le bouton d'alimentation ou sur l'une des touches du clavier.
Si l'ordinateur est alimenté par la batterie, vous pouvez augmenter son autonomie en utilisant le mode Veille prolongée, qui consomme moins d'énergie que le mode Veille. Limitations du mode Veille Le mode Veille ne peut pas fonctionner dans les conditions suivantes : L'alimentation est rétablie immédiatement après l'arrêt. Les circuits mémoire sont exposés à de l'électricité statique ou du bruit électrique.
Activation du mode Veille prolongée Pour entrer en mode Veille prolongée, procédez comme suit : 1. 2. Cliquez sur l'option Paramètres dans la barre Icônes. Cliquez sur Marche/Arrêt, puis sélectionnez Mettre en veille. Appliquez la procédure suivante pour afficher l'option Mettre en veille dans le menu Marche/Arrêt : 1. Cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Panneau de configuration -> Système et sécurité -> Options d'alimentation.
Chapitre 3 Présentation Ce chapitre présente les différents composants de votre ordinateur. Familiarisez-vous avec ces derniers avant de l'utiliser. Remarques légales (icônes ne correspondant à aucune fonctionnalité) Pour plus d'informations sur les remarques légales relatives aux icônes ne correspondant à aucune fonctionnalité, consultez la section Remarques légales. Veuillez manipuler votre ordinateur avec précautions pour ne pas rayer ou endommager la surface.
Voyant Alimentation Le voyant Alimentation devient blanc lorsque l'ordinateur est activé. Si vous mettez l'ordinateur en veille, ce voyant clignote en blanc. Voyant de Le voyant Communication sans fil est allumé communications sans en orange lorsque les fonctions Bluetooth ou fil LAN sans fil sont actives. Seuls certains modèles disposent de fonctions réseau sans fil et Bluetooth.
Prise entrée adaptateur 19 V Reliez l'adaptateur secteur à ce connecteur pour faire fonctionner l'ordinateur sur secteur et recharger ses batteries internes. Utilisez uniquement le modèle d'adaptateur secteur fourni avec l'ordinateur. Tout adaptateur non conçu pour cet ordinateur pourrait endommager celui-ci. Port USB (USB 2.0) Un port USB (Universal Serial Bus) à la norme USB 2.0 se trouve sur le côté gauche de l'ordinateur. Le port USB 2.0 n'est pas compatible avec les périphériques USB 3.0.
Illustration 3-3 Ordinateur vu de droite 1 2 3 4 5 6 1. Prise casque 2. Prise microphone 3. Port USB (USB 2.0 ou 3.0)* 4. Port USB (USB 2.0 ou 3.0)* 7 8 5. Port de sortie HDMI* 6. Prise LAN* 7. Port écran externe (RVB)* 8. Ventilation * Modèles sélectionnés uniquement. Aspect variable selon le modèle acheté. Prise casque Une prise jack mini de 3,5 mm permet de connecter un casque stéréo. Prise microphone Une miniprise jack de 3,5 mm permet de brancher un microphone mono.
Prise réseau local Cette prise permet de raccorder l'ordinateur à un réseau local. L'adaptateur intègre la prise en charge des LAN Ethernet (10 mégabits par seconde, 10BASE-T) ou des LAN Fast Ethernet (100 mégabits par seconde, 100BASE-TX). Certains modèle disposent d'une carte réseau Gigabit Ethernet (1 000 mégabits par seconde, 1000BASE-T). Consultez la section Concepts de base pour plus de détails. Ne branchez aucun type de câble autre qu'un câble réseau sur la prise réseau.
Vue de dessous L'illustration suivante présente l'ordinateur vu de dessous. Avant de retourner l'ordinateur, rabattez l'écran pour éviter de l'endommager. Illustration 3-5 Ordinateur vu de dessous 2 1 4 3 4 4 1. Verrou de la batterie 2. Loquet de dégagement de la batterie 3. Emplacement pour module mémoire 4. Grille d'aération Aspect variable selon le modèle acheté. Verrou de la batterie Faites glisser le verrou de la batterie avant de l'enlever.
Nettoyez avec précautions la surface des ouvertures d'aérations avec un chiffon doux. Vue avant (écran ouvert) Cette section présente l'ordinateur avec l'écran ouvert. Pour ouvrir l'écran, soulevez le panneau et choisissez un angle de lecture confortable. Illustration 3-6 Vue avant de l'ordinateur, écran ouvert 3 1 4 5 2 9 7 6 10 9 7 11 13 8 12 1. Antennes de communication sans fil (non visibles)* 2. Microphone* 3. Voyant de la caméra Web* 4. Caméra Web* 5. Microphone* 6. Écran 7.
Microphone Un microphone intégré permet d'importer et d'enregistrer des sons dans vos applications. Consultez la section Système audio et mode vidéo pour plus de détails. Voyant de la caméra Web Le voyant de la caméra Web s'affiche lorsque vous utilisez cette caméra. Caméra Web La caméra Web est un périphérique qui permet d'enregistrer des vidéos ou de prendre des photos directement à partir de l'ordinateur.
Haut-parleurs stéréo Les haut-parleurs retransmettent les sons générés par vos applications ainsi que les alertes audio du système, tels que les alarmes de batterie faible par exemple. Bouton d'alimentation Ce bouton permet de mettre l'ordinateur sous tension et hors tension. TouchPad La tablette Touch Pad, située sur le reposemains, permet de contrôler les mouvements du pointeur à l'écran. Pour utiliser TouchPad, appuyez dessus et faites glisser votre doigt pour déplacer le curseur.
Disque dur ou SSD La capacité du disque dur varie en fonction du modèle. Pour identifier le disque dur/SSD utilisé par votre modèle, ouvrez TOSHIBA PC Health Monitor en cliquant sur Bureau -> Desktop Assist (dans la barre des tâches) -> Assistance et restauration -> PC Health Monitor, puis en cliquant sur Informations ordinateur. Une partie de l'espace disque est réservée à l'administration de ce dernier.
Contrôleur d'écran Le contrôleur d'écran interprète les commandes reçues et les traduit en commandes de pilotage des pixels correspondants. Le contrôleur d'écran contrôle également le mode vidéo, qui répond aux normes internationales relatives à la résolution d'écran et au nombre maximum de couleurs à afficher à l'écran. Les logiciels écrits pour un mode vidéo donné fonctionnent sur tout ordinateur gérant ce mode.
Pour ouvrir le panneau de configuration NVIDIA, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Panneau de configuration -> Matériel et son -> NVIDIA Control Panel. Pour plus d'informations concernant le panneau de configuration NVIDIA, consultez l'aide de NVIDIA Control Panel. Pour y accéder, cliquez sur Aide dans le menu principal, puis sélectionnez l'aide de NVIDIA Control Panel.
2. 3. 4. Sélectionnez Sur batterie dans le menu déroulant de Source d'alimentation. Désactivez la case DPS (Display Power Saving). Cliquez sur OK. Pour rétablir cette fonctionnalité, suivez les étapes ci-dessus et cochez la case DPS (Display Power Saving). AMD® Vari-Bright™ Il se peut que votre modèle inclue la fonction AMD® Vari-Bright™, qui permet de limiter la consommation d'énergie de l'ordinateur en optimisant le contraste de l'image sur l'écran LCD interne.
Sous tension Hors tension (arrêt) Adaptateur secteur branché Adaptateur secteur non connecté Batterie totalement chargée • Fonctionne • Pas de charge • Pas de charge • Voyant : blanc Batterie partiellement chargée ou épuisée • Fonctionne • Charge rapide • Charge • Voyant : orange Le niveau de charge de la batterie est suffisant • Fonctionne Le niveau de charge de la batterie est insuffisant • Fonctionne La batterie est épuisée L'ordinateur s'arrête • Voyant : blanc • Voyant : orange •
Voyant Alimentation Le voyant Alimentation indique l'état de fonctionnement de l'ordinateur. Ses indications sont les suivantes : Blanc L'adaptateur secteur est branché et alimente l'ordinateur. Blanc clignotant Indique que l'ordinateur est en mode Veille et dispose d'une alimentation (sur secteur ou sur batterie) suffisante pour préserver cet état. Pas de lumière Le voyant est éteint dans tous les autres cas.
Chapitre 4 Concepts de base Ce chapitre décrit les opérations de base de l'ordinateur et les précautions relatives à leur utilisation. Utilisation du TouchPad Le Touch Pad situé sur le repose-mains prend en charge les gestes suivantes : Appui simple Il suffit d'appuyer une fois sur le TouchPad pour ouvrir ce que vous avez ainsi touché, par exemple une application.
Une partie des fonctions du TouchPad décrites dans cette section ne sont prises en charge que dans certaines applications. Clavier Le nombre de touches figurant sur votre clavier dépend de la configuration correspondant à la langue utilisée. Leur disposition correspond à la zone de vente. Il existe différents types de touches : touches de machine à écrire, bloc numérique, touches de fonction, touches de configuration et touches spéciales de Windows.
Touche de fonctions Les touches de fonctions (F1 ~ F12) sont les 12 touches qui apparaissent en haut du clavier. Vous pouvez configurer le mode Touches de fonction en tant que « Mode de fonction spéciale » ou « Mode standard F1-F12 » en cliquant sur Bureau -> Desktop Assist (dans la barre des tâches) -> Outils et utilitaires -> Paramètres système -> Clavier. Le mode « fonction spéciale » permet d'utiliser des fonctions spéciales sans appuyer sur la touche FN.
Mode fonctions spéciales Mode Standard Fonction F1-F12 FN + 1 FN + 1 Réduit la taille de l'icône à l'écran ou la taille de la police dans l'une des fenêtres d'application prises en charge. FN + 2 FN + 2 Agrandit la taille de l'icône à l'écran ou la taille de la police dans l'une des fenêtres d'application prises en charge. FN + espace FN + espace Modifie la résolution de l'affichage. Certaines fonctions affichent une notification au bord de l'écran. Ces notifications sont désactivées par défaut.
Lecteurs optiques Cet ordinateur est équipé d'un lecteur de DVD super multi, d'un graveur de Blu-ray Disc™ ou d'un lecteur mixte de Blu-ray Disc™ (BDXL™). Lorsque l'ordinateur lit un disque optique, un voyant est allumé sur le lecteur. Formats Ces lecteurs prennent en charge les formats suivants.
1. 2. Appuyez sur le bouton d’éjection pour ouvrir le plateau lorsque l’ordinateur est sous tension. Tirez doucement sur le tiroir jusqu'à ce qu'il soit complètement ouvert. Illustration 4-2 Appuyez sur le bouton d'éjection pour ouvrir le tiroir 1 2 1. Bouton d'éjection 3. 2. Plateau Placez le disque dans le tiroir du lecteur (partie imprimée vers le haut). Illustration 4-3 Insertion d'un disque 1 1.
Si le disque n'est pas inséré correctement lors de la fermeture du tiroir, il risque d'être endommagé. Dans ce cas, le tiroir ne s'ouvre pas complètement lorsque vous appuyez sur le bouton d'éjection. Retrait de disques Suivez les étapes ci-dessous pour enlever le disque : N'appuyez pas sur le bouton d'éjection lorsque l'ordinateur accède au lecteur de disques optique. Attendez que le voyant Disque optique soit éteint avant d'ouvrir le tiroir.
Disques enregistrables Cette section décrit les types de inscriptibles. Vérifiez les caractéristiques techniques de votre lecteur pour savoir sur quels types de disques il peut graver. CD Les disques CD-R ne peuvent être gravés qu'une seule fois. Les données ainsi gravées ne peuvent plus être ni effacées ni modifiées. Vous pouvez enregistrer plusieurs fois de suite sur des CD-RW, ce qui inclut les CD-RW, les CD-RW grande vitesse et les CD-RW.
Remarque importante Avant d'écrire ou de réécrire sur tout disque pris en charge par le lecteur disques optiques, lisez et respectez toutes les instructions de sécurité et d'emploi décrites dans cette section. Faute de quoi le lecteur de disques optiques peut ne pas fonctionner correctement, et vous risquez de perdre des données ou de subir des dommages. Responsabilités TOSHIBA ne peut pas être tenu responsable de : Tout dommage sur un disque causé par l'écriture ou la réécriture avec ce produit.
DVD-R DC : MITSUBISHI KAGAKU MEDIA CO., LTD. (pour les supports de 4x et 8x) DVD+R : MITSUBISHI KAGAKU MEDIA CO., LTD. (pour les supports de 8x et 16x) TAIYO YUDEN CO., Ltd. (pour les supports 8x et 16x) DVD+R double couche : MITSUBISHI KAGAKU MEDIA CO., LTD. (pour les lecteurs d'une vitesse de 8x) DVD-RW : Spécifications DVD pour les disques enregistrables, version 1.1 ou version 1.2 Victor Company of Japan, Ltd. (JVC) (pour les disques 2x, 4x et 6x) MITSUBISHI KAGAKU MEDIA CO., LTD.
Certains types et formats de disques DVD-R double couche et DVD+R double couche peuvent ne pas être lisibles. Les DVD-R double couche créés au format 4 (LJP - Layer Jump Recording) ne peuvent pas être lus. Lors de la gravure ou de l'enregistrement Points à respecter lorsque vous gravez ou réenregistrez un support : Copiez toujours les données du disque dur vers le disque optique. N'utilisez pas la commande couper/coller en raison du risque de perte de données en cas d'erreur d'écriture.
Le logiciel de lecture TOSHIBA VIDEO PLAYER est destiné à la lecture de DVD et de fichiers vidéo. Avec certains disques Video, des pertes d'image, des sautes de son ou une désynchronisation de l'image et du son peuvent être constatés. Fermez toutes les autres applications lorsque vous utilisez TOSHIBA VIDEO PLAYER. Pendant la lecture d’un disque Video, n’ouvrez pas d’autre application et n’effectuez aucune opération.
Pour installer ou désinstaller le logiciel TOSHIBA VIDEO PLAYER , vous devez disposer des privilèges Administrateur. Ne changez pas de session Windows lorsque TOSHIBA VIDEO PLAYER est en cours d'exécution. Avec certains DVD ou fichiers vidéo, le changement de piste audio (bande son) dans la fenêtre de commande provoque également un changement de sous-titres. Ce logiciel peut uniquement lire des fichiers MPEG2, MP4 et WTV créés avec les applications préinstallées sur le même ordinateur.
Si vous ouvrez le menu dans la zone d'affichage à l'aide des boutons du menu principal ou des boutons de menu de la fenêtre de commande, vous ne pourrez peut-être pas utiliser la tablette tactile et la souris. Ouverture du manuel du logiciel de lecture TOSHIBA VIDEO PLAYER Les fonctions et l'utilisation de TOSHIBA VIDEO PLAYER sont expliquées en détails dans le manuel de TOSHIBA VIDEO PLAYER. Suivez la procédure ci-dessous pour ouvrir le manuel de TOSHIBA VIDEO PLAYER.
Veillez à ne pas tenter de lire une vidéo tout en enregistrant une émission avec une autre application. Cette opération pourrait provoquer des erreurs de lecture ou d'enregistrement de l'émission. De plus, tout démarrage d’un enregistrement préprogrammé pendant la lecture d’un disque vidéo peut provoquer des erreurs de lecture du ou d’enregistrement de l'émission. Veillez à ne pas visionner un disque vidéo lorsqu'un enregistrement est programmé.
Utilisation de TOSHIBA Blu-ray Disc Player Remarques sur l'utilisation de TOSHIBA Blu-ray Disc Player. L'affichage et les fonctionnalités disponibles varient selon les Bluray™ vidéo et les scènes. Si vous ouvrez le menu dans la zone d'affichage à l'aide des boutons du menu principal ou des boutons de menu de la fenêtre de commande, vous ne pourrez peut-être pas utiliser la tablette tactile et la souris. Ouvrez le manuel de TOSHIBA Blu-ray Disc Player.
L'effet 3D varie suivant les individus. Remarques sur la lecture en 3D avec TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER dispose d'une fonction de lecture en 3D, qui permet de lire les vidéos en 3D, ainsi que vos vidéos en 2D (fichier DVD ou vidéo) en 3D au moyen d'une procédure de conversion 2D/3D en temps réel. L'effet 3D ne peut s'afficher que sur un appareil externe 3D avec une connexion HDMI. Il n'est pas visible sur l'écran interne.
La lecture 3D se produit uniquement en mode plein écran. Lorsque vous activez la lecture 3D, la fenêtre vidéo s'affiche automatiquement en mode plein écran. Pour que la lecture 3D fonctionne sur l'écran externe ou le téléviseur, vous devez disposer d'un écran 3D ou d'un téléviseur qui dispose d'un port HDCP compatible HDMI. Le contenu vidéo 3D ne peut s'afficher que sur un écran externe disposant au minimum d'une connexion HDMI « avec 3D ». L'effet 3D varie suivant les individus.
Le logiciel PLAYER applique par défaut le format 2D. En appuyant sur le bouton de conversion 2D/3D, vous pouvez regarder vos vidéo 2D en mode 3D simulé. PLAYER n'exécute pas la fonction de conversion 2D/3D automatiquement. Consultez les avertissements dans cette section concernant les risques de non respect du copyright et confirmez que vous disposez des autorisations nécessaires.
L'effet 3D varie suivant les individus. Arrêtez ou limitez l'utilisation de votre matériel 3D si vous voyez des images vidéo en double ou ne supportez plus l'effet stéréoscopique 3D et réglez les paramètres. Si cette opération ne résout pas le problème, cessez de regarder des vidéos en 3D. Arrêtez immédiatement la lecture en 3D si vous sentez une gêne. Placez-vous bien en face de l'écran lorsque vous regardez des images vidéo en 3D. Prenez également le temps de faire des pauses.
Batterie de l'horloge temps réel (RTC) La batterie de l'horloge en temps réel (RTC) assure l'alimentation nécessaire à l'horloge en temps réel et au calendrier interne lorsque l'ordinateur est éteint. En cas de décharge complète de la batterie RTC, le système perd ces données. Vous pouvez modifier les paramètres de l'horloge en temps réel (RTC) dans l'utilitaire de configuration du BIOS. Consultez la section Dépannage pour plus de détails.
N'enlevez pas la batterie lorsque la fonction Wake-up on LAN est activée. Sinon, les données risquent d'être détruites. Avant de retirer la batterie, désactivez la fonction Wake-up on LAN. Charge des batteries Lorsque le niveau de la batterie diminue, le voyant orange Entrée adaptateur/Batterie clignote. L'autonomie n'est alors plus que de quelques minutes.
de ce dernier. Par exemple, si vous faites un usage intensif de périphériques externes, la charge de la batterie sera fortement ralentie. Remarque sur la charge des batteries La charge de la batterie n'est pas automatique dans les cas suivants : Si la batterie est extrêmement chaude ou froide (si elle est trop chaude, elle risque de ne pas pouvoir se recharger du tout). Pour atteindre le niveau de charge maximal de la batterie, effectuez l'opération à une température ambiante comprise entre 5° et 35° C.
Dans le cas d'une utilisation intensive, la capacité de la batterie s'amenuise progressivement. Par conséquent, une batterie ancienne, fréquemment utilisée, ne fonctionnera pas aussi longtemps qu'une batterie neuve à charge égale. Optimisation de la batterie L’utilité d’une batterie est fonction de son autonomie. L’autonomie d’une batterie dépend des éléments suivants : Vitesse du processeur. Luminosité de l'écran. Mode Veille système. Mode Veille prolongée système.
Prolongement de l'autonomie de la batterie Pour optimiser la durée de vie de la batterie principale, effectuez les opérations suivantes : Débranchez l'adaptateur secteur et alimentez l'ordinateur sur batterie jusqu'à ce qu'elle se décharge complètement. Suivez auparavant les instructions ci-dessous : 1. Mettez l’ordinateur hors tension. 2. Débranchez l'adaptateur secteur et mettez l'ordinateur sous tension. Si l'ordinateur ne démarre pas, passez à l'étape 4. 3.
Ne touchez pas le loquet de dégagement de la batterie lorsque vous tenez l'ordinateur, sinon vous risquez de vous blesser si la batterie tombe. Retrait de la batterie Pour extraire une batterie déchargée, suivez les instructions ci-dessous. 1. 2. 3. 4. 5. 6. Enregistrez votre travail. Dans l'onglet Paramètres, cliquez sur Alimentation puis sur Arrêt tout en maintenant enfoncée la touche MAJ. Vérifiez ensuite que l'indicateur de mise sous tension est éteint.
2. 3. Assurez-vous que la batterie est bien en place et que le verrou de sécurité de la batterie est en position verrouillée. Retournez votre ordinateur. Réseau local L'ordinateur peut prendre en charge les cartes réseau Ethernet (10 mégabits par seconde, 10BASE-T), Fast Ethernet (100 mégabits par seconde, 100BASE-TX) ou Gigabit Ethernet (1 000 mégabits par seconde, 1000BASE-T). Cette section indique comment se connecter à un réseau local ou s'en déconnecter.
Connectez l'adaptateur secteur avant de connecter le câble LAN. L'adaptateur secteur doit rester connecté pendant l'utilisation du réseau. Sinon, le système risque de se bloquer. Ne connectez pas de câbles autres que le câble réseau RJ-45 à la prise réseau local (LAN), faute de quoi les communications risquent de ne pas fonctionner ou vous risquez d'endommager l'ordinateur. Ne connectez aucun périphérique d'alimentation sur le câble réseau qui est lui-même connecté à l'ordinateur.
N'essayez pas d'installer ou de retirer un module mémoire dans les cas suivants. a. L'ordinateur est sous tension. b. L'ordinateur a été arrêté avec la commande Mettre en veille ou Veille prolongée. c. La fonction Wake-up on LAN est activée. d. La fonction de communication sans fil est activée. Veillez à ne pas laisser tomber de vis ou tout autre objet externe dans l'ordinateur. Sinon, risque de dysfonctionnement ou de court-circuit.
6. Glissez votre ongle ou un objet fin sous le capot et soulevez-le. Illustration 4-8 Retrait du couvercle du module mémoire 1 2 1. Vis 2. Capot du module mémoire Aspect variable selon le modèle acheté.
7. Alignez les encoches du mémoire sur ceux du connecteur, placez le module à un angle de 30° environ, appuyez doucement sur le module pour l'insérer, jusqu'à ce que les taquets se mettent en place avec un déclic. Illustration 4-9 Pose du module mémoire 1 2 3 1. Encoche 2. Connecteur B 3. Connecteur A Aspect variable selon le modèle acheté. Ne tentez pas d'insérer des objets métalliques, tels que des vis, des agrafes et des trombones, à l'intérieur de l'ordinateur.
8. Replacez le couvercle du module mémoire et fixez-le à l'aide de la vis. Assurez-vous de bien fermer le capot. Illustration 4-10 Retrait du capot du module mémoire 2 1 1. Capot du module mémoire 2. Vis Aspect variable selon le modèle acheté. 9. Installez la batterie, consultez la section Remplacement de la batterie si nécessaire. 10. Retournez votre ordinateur. 11. Démarrez l'ordinateur et assurez-vous que la mémoire supplémentaire a été détectée.
8. Saisissez le module par les côtés et retirez-le. Si l'ordinateur fonctionne depuis longtemps, les modules mémoire et les circuits se trouvant à proximité seront chauds. Dans ce cas, attendez qu'ils refroidissent avant de les remplacer. faute de quoi vous risquez de vous brûler. Ne touchez pas les connecteurs du module mémoire ou de l’ordinateur. Les débris ou poussières déposés sur les connecteurs risquent d'entraîner des dysfonctionnements. Illustration 4-11 Retrait d'un module mémoire 1 1 2 3 1.
Vous devez avoir recours à un adaptateur pour les cartes miniSD/ microSD. Le bon fonctionnement des cartes mémoires n'est pas contrôlé systématiquement. Il n'est donc pas garanti à 100 %. L'emplacement ne supporte pas les fonctions Magic Gate.
Formatage des cartes mémoire Les nouvelles cartes sont formatées en fonction de normes spécifiques. Si vous devez formater à nouveau une carte mémoire, utilisez un périphérique prenant en charge les cartes mémoire. Formatage d'une carte mémoire Les cartes mémoire sont vendues préformatées conformément aux normes en vigueur. Si vous souhaitez formater à nouveau une carte mémoire, employez directement l'appareil qui utilise ce type de carte, tel qu'un appareil photo numérique ou un baladeur MP3.
A propos de la protection en écriture Les cartes mémoire multimédias disposent d'une fonction de protection en écriture. Carte SD (carte mémoire SD, SDHC et SDXC) Verrouillez la carte si vous ne souhaitez pas l'utiliser pour enregistrer des données. Insertion d'une carte mémoire Les instructions suivantes s'appliquent à tous les types de supports pris en charge. Pour insérer une carte mémoire, procédez comme suit : 1. 2. 3.
1. 2. 3. Cliquez sur la fenêtre Bureau et développez l'icône Retirer le périphérique en toute sécurité et Ejecter le média dans la barre des tâches de Windows. Sélectionnez la carte mémoire. Saisissez la carte et retirez-la. Si vous enlevez la carte mémoire ou mettez l'ordinateur hors tension pendant que l'ordinateur accède à la carte, vous risquez de perdre des données ou d'endommager la carte. Ne retirez pas la carte mémoire lorsque l'ordinateur est en Veille ou Veille prolongée.
Le port écran externe de cet ordinateur ne dispose d'aucune vis de fixation pour câble d'écran RVB externe. Toutefois, il reste possible d'utiliser des câbles de moniteur externe dotés de connecteurs à vis. 2. Mettez l'écran sous tension. Lorsque vous mettez l'ordinateur sous tension, ce dernier détecte automatiquement l'écran et détermine s'il s'agit d'un écran couleur ou monochrome.
système en cours d'arrêt. Lorsque vous connectez un téléviseur ou un écran externe au port HDMI et que le périphérique de sortie d'affichage est défini sur HDMI. Lorsque vous débranchez le câble HDMI, attendez au moins 5 secondes avant de le brancher à nouveau. Lorsque vous modifiez le périphérique d'affichage, ce dernier peut ne pas être utilisé automatiquement. Dans ce cas, pour associer le périphérique audio à l'écran, réglez manuellement le périphérique de la façon suivante : 1.
Modification des paramètres d'affichage Si un ou plusieurs écrans externes sont connectés, le système d'exploitation peut automatiquement détecter, identifier et configurer les paramètres d'affichage. Vous pouvez modifier manuellement la façon dont les écrans externes fonctionnent et les paramètres d'affichage en appuyant sur P tout en maintenant la touche Windows ( ). Si vous déconnectez l’écran externe avant la mise hors tension, activez l’écran interne.
Adaptateur secteur universel Si vous utilisez régulièrement votre ordinateur à plusieurs endroits, il peut être pratique de disposer d'adaptateurs secteur supplémentaires sur ces sites afin de ne pas avoir à les transporter. Batterie principale Vous pouvez acheter une batterie supplémentaire pour disposer de plus d'autonomie. Consultez la section Batterie pour plus d'informations. Système audio et mode vidéo Cette section décrit certaines commandes audio.
Rendu audio avancé correspondant au contenu vidéo 2D et 3D pour obtenir un son occupant tout l'espace. Positionnement précis des repères audio pour un son immersif à partir de toutes les configurations de haut-parleurs ou casques pour ordinateur de bureau ou portable. Point optimal étendu avec élévation de l'image sonore. Volume maximal assurant une puissance exceptionnelle sans pertes ou distorsions. Amélioration de la boîte de dialogue assurant une qualité incomparable pour la voix.
Pour ouvrir la boîte de dialogue Résolution de l'écran, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Panneau de configuration -> Apparence et personnalisation -> Affichage -> Modifier les paramètres d'affichage. Si vous exécutez certaines applications (par exemple une application 3D ou la lecture de vidéos), vous constaterez des perturbations, le vacillement ou la perte d'images sur votre écran. Dans ce cas, réglez la résolution de l'affichage.
Chapitre 5 Utilitaires et fonctions avancées Le présent chapitre décrit les utilitaires et les fonctions avancées de cet ordinateur. Utilitaires et applications Cette section décrit les utilitaires préinstallés sur l'ordinateur et indique comment y accéder. Pour plus de détails sur leur utilisation, reportez-vous à leur manuel en ligne, à leur fichier d'aide ou au fichier Lisez-moi, le cas échéant.
Utilitaire TOSHIBA Display TOSHIBA Display Utility inclut les utilitaires Taille de texte du bureau et Split Screen et Autres paramètres. Taille de texte du bureau permet d'agrandir ou de réduire le texte du bureau en fonction de vos préférences. Vous pouvez modifier la taille du texte qui s'affiche à l'écran et dans la barre de titre des fenêtres en changeant l'échelle de la taille du texte.
TOSHIBA VIDEO PLAYER Ce logiciel permet de lire les DVD vidéo. Pour ouvrir cet utilitaire, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Médias et divertissement -> TOSHIBA VIDEO PLAYER. Pour plus de détails sur l'utilisation de TOSHIBA VIDEO PLAYER, consultez le fichier d'aide. TOSHIBA eco Utility Cet ordinateur dispose d'un mode « éco ». Ce mode ralentit légèrement les performances de certains périphériques pour réduire la consommation d'électricité.
TOSHIBA Media Player par sMedio TrueLink+ Ce logiciel multimédias permet de lire des vidéos, de la musique et des photos. TOSHIBA Media Player permet de lire du contenu multimédias depuis une bibliothèque locale, le réseau domestique ou SkyDrive. Pour ouvrir ce programme, cliquez sur l'icône Media Player dans Démarrer. Pour plus de détails, reportez-vous au didacticiel et à l'aide en ligne.
TOSHIBA Resolution+ Plug-in pour le Lecteur Windows Media Le plug-in permet de convertir les vidéos wmv et mp4 avec le Lecteur Windows Media. Pour plus d'informations, consultez l'aide de TOSHIBA Resolution+ Plug-in pour le lecteur Windows Media. Pour y accéder, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Médias et divertissement -> TOSHIBA Resolution+ Plug-in for Windows Media Player - Aide.
Alimentation évoluée Le système d'alimentation de l'ordinateur dispose d'un processeur dédié pour mesurer le niveau de la batterie et calculer l'autonomie disponible, ainsi que pour protéger les composants électroniques de toute condition anormale, par exemple une surtension en sortie de l'adaptateur. Cela peut être spécifié dans les Options d'alimentation. *1 Mode d'économie de la batterie *1 Cette fonction permet de configurer l'ordinateur pour économiser la batterie.
Refroidissement *1 Si la température de l’ordinateur dépasse un certain niveau, le ventilateur est activé ou la fréquence du processeur est réduite afin d’éviter toute surchauffe. Vous pouvez choisir de contrôler la température soit en activant d'abord le ventilateur, puis en réduisant la fréquence si nécessaire, soit en réduisant d'abord la fréquence puis en activant le ventilateur si nécessaire. Ces fonctions sont contrôlées dans la section Options d'alimentation.
Ensuite, une boîte de dialogue s'affiche afin de l'enregistrer sur un autre support. Ainsi, si vous oubliez votre mot de passe, vous disposez d'un fichier comportant ce dernier et pouvez le consulter sur un autre ordinateur. Rangez le support contenant le mot de passe en lieu sûr. Lorsque vous entrez une chaîne de caractères pour enregistrer le mot de passe, utilisez uniquement les caractères qui figurent sur le clavier. Ne tapez pas de codes ASCII et n'utilisez pas la fonction copier-coller.
En cas de perte du mot de passe utilisateur du disque dur, TOSHIBA ne sera PAS en mesure de vous aider, et votre disque dur deviendra COMPLETEMENT INUTILISABLE et de façon PERMANENTE. TOSHIBA ne peut en AUCUN cas être tenu pour responsable en cas de pertes de données, de perte fonctionnelle ou d'accès au disque dur, ou de toute autre perte encourue à titre personnel ou collectif, ce qui inclut les usages professionnels, résultant de la perte d'accès au disque dur.
À ce stade, les touches de fonction ne fonctionnent pas. Elles ne seront accessibles que lorsque vous aurez entré le mot de passe. 2. 3. Entrez le mot de passe. Appuyez sur Enter. Si vous entrez un mot de passe incorrect trois fois de suite, ou si vous n'entrez aucun mot de passe au bout d'une minute, l'ordinateur s'arrête. Dans ce cas, certaines fonctions servant à démarrer l'ordinateur automatiquement (Wake-up on LAN, Planificateur de tâches, etc.) risquent de ne pas fonctionner.
Les paramètres et les options détaillées ici peuvent varier en fonction du modèle de votre ordinateur. Après avoir modifié les paramètres, il peut être nécessaire de redémarrer l'ordinateur. Redémarrez l'ordinateur juste après avoir apporté ces modifications.
Les photos chargées sur SkyDrive sont limitées à une résolution maximale de 2 048 x 2 048 pixels. Toutes les photos qui dépassent cette résolution sont mises à l'échelle de façon proportionnelle jusqu'à 2 048 x 2 048 pixels. Cette application ne prend pas en charge DMS. Utilisation de TOSHIBA Media Player par sMedio TrueLink+ Procédure de lecture d'un fichier vidéo à partir d'une bibliothèque locale : 1. 2. Cliquez sur My Local Library (Bibliothèque locale) dans la page d'accueil de TOSHIBA Media Player.
TOSHIBA PC Health Monitor L'application TOSHIBA PC Health Monitor supervise en permanence un ensemble de fonctions système, telles que la consommation d'énergie, la santé de la batterie et le refroidissement du système, et vous tient informé. Cette application identifie les différents composants du système et leur numéro de série, et suit les activités correspondantes.
acceptation concernant le logiciel PC Health Monitor) s'affiche. Lisez avec attention les informations qui s'affichent. La sélection de ACCEPT et le fait de cliquer sur OK pour accepter les conditions d'utilisation et le partage des informations recueillies, et activer le programme. En activant TOSHIBA PC Health Monitor, vous acceptez ces termes et conditions, ainsi que l'utilisation et le partage des informations ainsi collectées.
N’éteignez pas l'ordinateur, ne fermez pas votre session et n'utilisez pas les modes de veille/veille prolongée durant la procédure d'écriture ou réécriture. Placez l'ordinateur sur une surface plane et évitez les emplacements soumis à des vibrations (avions, trains ou voitures). Ne posez pas l'ordinateur sur des surfaces instables, comme un trépied.
Assurez-vous que l'option Vitesse de démarrage est définie sur Normale. (Pour y accéder, cliquez sur Bureau -> Desktop Assist (dans la barre des tâches) -> Outils et utilitaires -> Paramètres système -> Options de démarrage.) Avant toute restauration, assurez-vous que l'option de mode de démarrage par défaut est activée dans l'utilitaire de configuration du BIOS « BIOS Setup ». 1. Cliquez sur l'icône Paramètres, puis sur Alimentation et sélectionnez Redémarrer. 2.
Restauration des logiciels préinstallés à partir du disque dur Une partie de l'espace disque est configurée en tant que partition cachée de restauration. Cette partition regroupe les fichiers indispensables à la restauration des logiciels pré-installés en cas de problème. Si vous reconfigurez ensuite votre disque dur, ne pas modifier, supprimer ou ajouter de partitions autrement que spécifié dans le manuel. Cela risquerait de supprimer l'espace nécessaire au logiciel requis.
* Ce service n'est pas gratuit. 1. 2. Consultez le site https://backupmedia.toshiba.eu sur Internet. Suivez les instructions qui s'affichent à l'écran. Vous recevrez vos disques de restauration sous deux semaines à compter de votre commande.
Chapitre 6 Dépannage Votre ordinateur a été conçu par TOSHIBA dans un souci de durabilité. Toutefois, en cas de problèmes, consultez les procédures décrites dans ce chapitre pour en déterminer la cause. Il est recommandé à tous les utilisateurs de lire attentivement ce chapitre, car la connaissance des problèmes potentiels permet souvent de les anticiper.
Examinez l'état des câbles et des connecteurs (les broches sont-elles toutes bien fixées ?). Assurez-vous que votre lecteur de disques est bien chargé Notez vos observations. Il vous sera ainsi plus facile de décrire le problème au technicien ou au revendeur TOSHIBA. En outre, si un problème se produit de nouveau, vous l'identifierez plus facilement. Analyse du problème Le système donne parfois des indications qui peuvent vous aider à identifier le problème.
Matériel Si le problème n'est pas d'ordre logiciel, vérifiez le matériel. Passez en revue les points mentionnés dans la liste des vérifications préliminaires puis, si le problème persiste, essayez d'en identifier la source. Vous trouverez dans la section suivante des listes détaillées de vérifications pour chaque composant et périphérique.
Si vous utilisez l'adaptateur secteur, assurez-vous que la prise murale fonctionne en y branchant un autre appareil, tel qu'une lampe. Le voyant Alimentation indique si l'ordinateur est actif ou non. Si ce voyant est allumé, l'ordinateur est actif. Essayez également d'arrêter l'ordinateur et de le redémarrer. Si vous utilisez un adaptateur secteur, vérifiez le voyant Entrée adaptateur/Batterie pour vous assurer que l'ordinateur est bien sous tension.
Sous tension Lorsque l'ordinateur n'est pas branché sur le secteur, la batterie est la principale source d'alimentation. Toutefois, l'ordinateur possède d'autres sources d'énergie, dont l'alimentation évoluée et la batterie RTC. Toutes ces sources étant interconnectées, chacune d'entre elles peut provoquer un problème d'alimentation.
Problème Procédure La batterie n'alimente pas l'ordinateur La batterie peut être déchargée. Dans ce cas, branchez l'adaptateur secteur afin de la recharger. La batterie ne se charge pas quand l’adaptateur secteur est branché. Si la batterie est complètement déchargée, elle ne se recharge pas immédiatement. Attendez quelques minutes. Si la batterie ne se charge toujours pas, vérifiez que l'adaptateur secteur est bien sous tension. Pour ce faire, branchez une lampe, par exemple.
Horloge RTC Problème Procédure Le paramètre BIOS et la date et l'heure sont perdus. La batterie RTC est épuisée, vous devez définir la date et l'heure dans le programme de configuration du BIOS de la façon suivante : 1. 2. 3. 4. 5. 6. Dans la barre Paramètres, cliquez sur Marche/Arrêt, puis sélectionnez Redémarrer. Maintenez la touche F2 et relâchez-la environ une seconde après le redémarrage du systèm, afin de charger l'utilitaire de configuration du BIOS. Tapez la date dans le champ System Date.
Problème Procédure Des marques s'affichent à l'écran. Elles peuvent provenir d'un contact avec le clavier ou le TouchPad lors de la fermeture de l'écran. Essayez de nettoyer ces marques en essuyant doucement l'écran ACL avec un tissu sec et propre ou, si cela ne suffit pas, avec un produit de nettoyage de bonne qualité. Dans ce cas, respectez toujours les instructions relatives au produit de nettoyage et vérifiez que l'écran est propre et sec avant de le rabattre à nouveau.
Problème Procédure Vous ne pouvez pas accéder aux données du CD/ DVD/Blu-ray Disc™ inséré dans le lecteur Assurez-vous que le tiroir du lecteur est correctement fermé. Dans le cas contraire, exercez une légère pression pour le refermer. Ouvrez le tiroir et assurez-vous que le disque est inséré correctement. Il doit être à plat, la face imprimée vers le haut. Un objet quelconque infiltré dans le tiroir peut empêcher la lecture laser du disque.
TouchPad Problème Procédure Le TouchPad ne fonctionne pas. Vérifiez les paramètres de sélection de périphérique. Cliquez sur Bureau -> Desktop Assist -> Panneau de configuration -> Matériel et audio > Souris. Le pointeur à l'écran Dans ce cas le système peut être occupé ne répond pas au Essayez de déplacer la souris après un court mouvement du instant. périphérique de pointage.
Souris USB Problème Procédure Le pointeur à l'écran Dans ce cas le système peut être occupé ne répond pas au Essayez de déplacer la souris après un court mouvement de instant. TouchPad. Débranchez la souris de l'ordinateur et reconnectez-la à un port USB pour vérifier qu'elle est bien détectée. Le double-clic ne fonctionne pas Essayez de changer le paramètre de vitesse du double-clic dans l'utilitaire de contrôle de la souris. 1. 2. 3.
Problème Procédure Le périphérique USB Débranchez le périphérique USB de l'ordinateur et ne fonctionne pas reconnectez-le à un port USB pour vérifier qu'il est bien détecté. Assurez-vous que les pilotes USB nécessaires sont correctement installés. Pour ce faire, consultez la documentation du périphérique et celle du système d'exploitation. Système audio En complément des informations de cette section, veuillez consulter la documentation de votre périphérique audio.
Problème Procédure L'écran n'affiche rien Essayez de régler le contraste et la luminosité de l'écran externe. Appuyez sur la touche de fonction pour changer la priorité de l'affichage et vous assurer que l'écran interne n'est pas sélectionné en affichage seul. Assurez-vous que l'écran externe est connecté.
Réseau sans fil Problème Procédure Impossible d'accéder à la carte réseau sans fil Vérifiez que le commutateur de communications sans fil de l'ordinateur est en position activée. Si le problème persiste, contactez votre administrateur de réseau. Bluetooth Problème Procédure Impossible d'accéder au périphérique Bluetooth Assurez-vous que le commutateur de communication sans fil de l'ordinateur est sur la position On (marche).
Personnes à contacter Si vous ne parvenez toujours pas à résoudre le problème et pensez qu'il est d'origine matérielle, contactez votre revendeur ou consultez le site www.toshiba-europe.com sur Internet.
Chapitre 7 Annexe Spécifications Vous trouverez dans cette section la liste des spécifications techniques de l'ordinateur. Dimensions Les dimensions physiques indiquées ci-dessous n'incluent pas les pièces protubérantes. Les dimensions physiques varient en fonction du modèle acheté. Dimensions Environ 380 (L) × 242 (P) × 30,8/33,35 (H) mm (Ces dimensions ne tiennent pas compte des éléments qui dépassent du châssis.
Alimentation Adaptateur secteur 100-240 V ~ 50 ou 60 Hz (cycles par seconde) Ordinateur 19 V c.c.
Cordons et connecteurs d'alimentation Les connecteurs du cordon d'alimentation doivent être compatibles avec les prises de courant locales, et le cordon doit être conforme aux normes en vigueur dans le pays ou la région d'utilisation. Tous les cordons d'alimentation doivent respecter les spécifications suivantes : Section du fil : Minimum 0,75 mm2 Intensité du courant : 2,5 ampères minimum Agences de certification Chine : CQC E-U et Canada : Dans la liste UL et certifiés CSA Non.
Etats-Unis Royaume-Uni Agréé UL Agréé BS Australie Europe Agréé AS Agréé par l'agence appropriée Canada Chine Agréé CSA Agréé CCC Informations relatives aux périphériques sans fil Interopérabilité de la technologie sans fil Le réseau sans fil avec les autres systèmes réseau DSSS (Direct Sequence Spread Spectrum - Etalement du spectre en séquence directe)/ OFDM (Orthogonal Frequency Division Multiplexing - multiplexage orthogonal en répartition de fréquence) et est conforme aux certifications sui
Nous n'avons pas été en mesure de tester la connexion et l'utilisation de nos périphériques sans fil avec l'ensemble des périphériques susceptibles d'utiliser cette technologie. Les périphériques Bluetooth et LAN sans fil utilisent la même plage de fréquence radio et risquent de provoquer des interférences mutuelles. Si vous utilisez des appareils Bluetooth et LAN sans fil simultanément, les performances réseau risquent de s’en ressentir et vous risquez de perdre la connexion.
Technologie LAN sans fil Votre ordinateur prend en charge les communications sans fil avec certains types de périphériques. Seuls certains modèles disposent à la fois de fonctions réseau sans fil et Bluetooth. N'utilisez pas les fonctionnalités réseau sans fil (Wi-Fi) ou Bluetooth à proximité d'un four à micro-ondes ou dans des environnements soumis à des interférences radio ou à des champs magnétiques.
Protocole d'accès au support CSMA/CA (évitement des collisions) avec accusé de réception (ACK) Caractéristiques radio Les caractéristiques radio du module pour réseau sans fil varient selon différents facteurs : le pays où le produit a été acheté ; le type de produit. Les communications sans fil font souvent l'objet de réglementations locales.
Le chiffrement prévient les écoutes non autorisées et préserve le caractère privé des liaisons. Disponibilité à l'échelle mondiale Les transmetteurs et les émetteurs radio Bluetooth fonctionnent dans la bande de 2,4 GHz, qui ne fait pas l'objet de licence et est compatible avec les systèmes radio de la plupart des pays. Liaisons radio Vous pouvez très simplement relier plusieurs périphériques. Cette liaison est maintenue même si un obstacle les sépare.
Norvège : Mis en œuvre Cette sous-section ne concerne pas la région géographique dans un rayon de 20 km à partir du centre de Ny-Ålesund. Fédération russe : - Uniquement pour des utilisations intérieures. Limites d'utilisation des fréquences 5 150 à 5 350 MHz en Europe Italie : - Pour l'utilisation privée, une autorisation générale est requise si le WAS/RLAN est utilisé en dehors de votre propriété.
Fédération russe : Limité e.i.r.p 100 mW. L'usage est limité aux applications en intérieur, aux zones industrielles et aux entrepôts fermés et à bord des avions. 1. 2. Autorisé pour les réseaux locaux de communication des équipages à l'aéroport et en vol. Autorisé pour l'accès aux réseaux sans fil publics embarqués pour les vols à moins de 3 000 m d'altitude.
Avec la configuration opérationnelle habituelle, la distance entre l'antenne et l'utilisateur ne doit pas dépasser 20 cm. Consultez le manuel de l'utilisateur de l'ordinateur pour plus de détails concernant le positionnement de l'antenne. L'installateur de cet équipement radio doit s'assurer que l'antenne est située ou dirigée de telle façon qu'elle n'émette pas de champ de fréquence radio au-delà des limites spécifiées par Santé Canada.
stations radio sous licence ou stations spécifiques de faible puissance et sans licence pour les systèmes d'identification d'objets mobiles (RFID) utilisés dans les lignes de production industrielles (autres stations radio). 1. 2. 3. Avant d'utiliser cet équipement, assurez-vous qu'il ne provoque pas d'interférences avec les équipements ci-dessus.
Agrément du périphérique Le présent périphérique a été certifié conforme par le TRCC (Technical Regulation Conformity Certification) et appartient à la classe d'équipements radio de communication de données de faible puissance stipulée par la loi sur les télécommunications professionnelles du Japon. Realtek® RTL8188EE 802.11n Wireless LAN Nom de l’équipement radio : RTL8188EE DSP Research, Inc.
Roumanie République Slovaque Slovénie Espagne Suède Suisse R-U Etats-Unis Remarques légales Icônes sans correspondances Certains châssis d'ordinateurs portables sont conçus pour accepter toutes les configurations possibles d'une série complète de produits. Par conséquent, le modèle sélectionné risque de ne pas comporter toutes les fonctionnalités et les spécifications correspondant aux icônes et voyants présents sur le châssis de l'ordinateur.
toujours les recommandations d'utilisation. Consultez les restrictions supplémentaires dans la documentation de votre produit. Contactez votre revendeur Toshiba, reportez-vous à la section relative à l'assistance technique TOSHIBA pour plus de détails. Processeurs sur 64 bits Certains pilotes de périphérique 32 bits et/ou applications peuvent ne pas être compatibles avec un processeur/système d'exploitation 64 bits et peuvent par conséquent ne pas fonctionner correctement.
insuffisantes. Cette limitation s'applique à tous les types de batterie. Pour acheter une nouvelle batterie, consultez les informations relatives aux accessoires livrés avec votre ordinateur. Capacité du lecteur de disque dur (DD) 1 giga-octets (Go) correspond à 109 = 1 000 000 000 octets à la puissance 10.
Index A insertion 4-36 retrait 4-36 Adaptateur secteur branchement 2-3 port Entrée adaptateur 19 V 3-3 supplémentaire 4-41 Clavier problèmes 6-7 Touche de fonctions F1...
ouverture 2-5 Mode vidéo 4-42 Ecran externe problèmes 6-12 Mot de passe démarrage de l'ordinateur avec mot de passe 5-9 mise sous tension 5-5 Supervisor 5-9 utilisateur 5-7 Entretien carte mémoire 4-35 Entretien des supports de données entretien des cartes 4-35 Nettoyage de l'ordinateur 1-14 L LAN connexion 4-27 Lecteur de cartes mémoire 4-33 Lecteur de DVD Super Multi écriture 4-8 utilisation 4-5 Liste de contrôle de l'équipement 2-1 M Mémoire installation 4-29 retrait 4-32 Mémoire vive vidéo 3-10 MMC
R Redémarrage de l'ordinateur 2-9 Réseau local câbles 4-27 S SD/SDHC/SDXC formatage 4-35 SD/SDHC/SDXC, carte Remarque 4-34 Support de restauration 5-15, 5-17 Système audio problèmes 6-12 T TOSHIBA Desktop Assist 5-1 U USB problèmes 6-11 V Ventilation 3-5, 3-6 Voyant Batterie 3-14 Voyant Entrée adaptateur/ Batterie 3-14 Voyants Entrée adaptateur 3-1 Manuel de l'utilisateur Index-3