Gebruikershandleiding C50/C50D/C50t/C50Dt/C55/ C55D/C55t/C55Dt
Inhoudsopgave Hoofdstuk 1 TOSHIBA: wet- en regelgeving en veiligheid Copyright, afwijzing van aansprakelijkheid en handelsmerken ....... 1-1 Voorschriften ......................................................................................... 1-2 Verklaring met betrekking tot videostandaarden ............................... 1-8 Licentiekwesties met de OpenSSL Toolkit ......................................... 1-8 ENERGY STAR®-programma .............................................................
Geheugenmedia .................................................................................. 4-35 Extern beeldscherm ............................................................................ 4-39 Beveiligingsslot ................................................................................... 4-42 Optionele TOSHIBA-accessoires ....................................................... 4-42 Geluidssysteem en videomodus .......................................................
Hoofdstuk 1 TOSHIBA: wet- en regelgeving en veiligheid In dit hoofdstuk vindt u informatie over wet- en regelgeving en veiligheid met betrekking tot TOSHIBA-computers. Copyright, afwijzing van aansprakelijkheid en handelsmerken Copyright ©2013 by TOSHIBA Corporation. Alle rechten voorbehouden. Krachtens de auteurswetten mag deze handleiding op geen enkele wijze worden verveelvoudigd zonder voorafgaande schriftelijke toestemming van TOSHIBA.
Handelsmerken Intel, Intel SpeedStep, Intel Core en Centrino zijn handelsmerken of gedeponeerde handelsmerken van Intel Corporation. AMD, het AMD-logo met de pijl, PowerPlay, Vari-Bright en combinaties daarvan zijn handelsmerken van Advanced Micro Devices, Inc. Windows, Microsoft en het Windows-logo zijn gedeponeerde handelsmerken van Microsoft Corporation. Het Bluetooth®-woordmerk en de Bluetooth-logo's zijn gedeponeerde handelsmerken in eigendom van Bluetooth SIG, Inc.
geïnstalleerd en gebruikt, kan dit resulteren in schadelijke storing van de radiocommunicatie. Zelfs als alle instructies zijn opgevolgd, kan echter storing optreden. Als deze apparatuur schadelijke storing voor radio- of televisieontvangst oplevert (wat kan worden vastgesteld door de apparatuur uit en weer aan te zetten), verdient het aanbeveling een of meer van de volgende maatregelen te treffen om de storing te verhelpen: Wijzig de richting of positie van de ontvangstantenne.
EU-verklaring van overeenstemming Dit product draagt het CE-keurmerk in overeenstemming met de relevante Europese richtlijnen. De verantwoording voor de toewijzing van CE-keurmerken ligt bij TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Duitsland. De volledige en officiële EU-verklaring van overeenstemming is te vinden op de TOSHIBA-website http://epps.toshiba-teg.com.
Mogelijke gevolgen van het gebruik van dit product in niet-geoorloofde werkomgevingen zijn onder andere: storing van de werking van andere apparaten of machines in de nabijheid; storing van de werking van dit product, mogelijk resulterend in gegevensverlies, als gevolg van storingen die worden gegenereerd door andere apparaten of machines in de nabijheid.
De volgende informatie is alleen van toepassing voor lidstaten van de EU: Afvalverwerking van producten Het symbool van een doorgekruiste vuilnisbak geeft aan dat producten afzonderlijk moeten worden ingezameld en gescheiden van huishoudelijk afval moeten worden verwerkt. Interne batterijen en accu's kunnen met het product worden weggegooid. Ze worden gescheiden door het recyclingcentrum. De zwarte balk geeft aan dat het product op de markt is gebracht na 13 augustus 2005.
Afhankelijk van in welk land of welke regio u dit product hebt aangeschaft, zijn deze symbolen mogelijk niet aanwezig. REACH - Verklaring van overeenstemming De nieuwe verordening van de Europese Unie (EU) met betrekking tot chemische stoffen, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals ofwel registratie, beoordeling, autorisatie en beperkingen van chemische stoffen), is vanaf 1 juni 2007 van kracht.
Afhankelijk van in welk land of welke regio u dit product hebt aangeschaft, zijn deze symbolen mogelijk niet aanwezig.
2. 3. 4. 5. 6. Bij herdistributie in binaire vorm moeten de bovenstaande copyrightmelding, deze lijst met voorwaarden en de volgende afwijzing van aansprakelijkheid in de documentatie en/of andere materialen bij de herdistributie worden vermeld. In elk reclamemateriaal waarin de functies of het gebruik van deze software worden vermeld, moet de volgende kennisgeving worden weergegeven: 'Dit product bevat software die is ontwikkeld door het OpenSSL Project voor gebruik in de OpenSSL Toolkit. (http://www.
Oorspronkelijke SSLeay-licentie ---------------------------------/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) Alle rechten voorbehouden. Dit pakket is een SSL-implementatie geschreven door Eric Young (eay@cryptsoft.com). De implementatie is geschreven conform de SSL van Netscape. Deze bibliotheek is gratis voor commercieel en niet-commercieel gebruik, mits aan de volgende voorwaarden wordt voldaan.
INBEGRIP VAN MAAR NIET BEPERKT TOT IMPLICIETE GARANTIES VAN VERKOOPBAARHEID EN GESCHIKTHEID VOOR EEN BEPAALD DOEL, WORDEN AFGEWEZEN.
ENERGY STAR®-programma Uw computer voldoet mogelijk aan de ENERGY STAR®richtlijnen. Als het model dat u hebt gekocht, hieraan voldoet, is de computer voorzien van het ENERGY STAR®-logo en is de volgende informatie van toepassing. TOSHIBA neemt deel aan het ENERGY STARprogramma van de Environmental Protection Agency (EPA). Deze computer voldoet aan de nieuwste ENERGY STAR-richtlijnen voor energiebesparing.
Veiligheidsinstructies voor optische schijfstations Vergeet niet de voorzorgsmaatregelen aan het einde van deze paragraaf te lezen. Het model met een station gebruikt een lasersysteem. Om er zeker van te zijn dat dit product correct wordt gebruikt, dient u deze handleiding zorgvuldig te lezen en ter referentie bij de hand te houden. Als het apparaat ooit moet worden gerepareerd, neemt u contact op met een Authorized Toshiba Service Center.
Algemene voorzorgsmaatregelen TOSHIBA-computers bieden optimale veiligheid en optimaal gebruikerscomfort; bovendien zijn ze robuust, een belangrijke eigenschap voor draagbare computers. U moet echter bepaalde voorzorgsmaatregelen nemen om het risico van lichamelijk letsel of beschadiging van de computer verder te beperken. Lees de onderstaande algemene aanwijzigen en let op de waarschuwingen die in de handleiding worden gegeven.
Blessures door overbelasting Lees zorgvuldig de Instructiehandleiding voor veiligheid en comfort. Hierin wordt toegelicht hoe u hand- en polsblessures als gevolg van langdurig toetsenbordgebruik kunt voorkomen. Dit document bevat eveneens informatie over het inrichten van de werkplek, de lichaamshouding en de verlichting, met behulp waarvan u lichamelijke overbelasting kunt reduceren. Letsel door verhitting Vermijd langdurig lichamelijk contact met de computer.
Sproei schoonmaakmiddel nooit rechtstreeks op de computer en laat er geen vloeistof inlopen. Gebruik nooit bijtende chemicaliën om de computer te reinigen. De computer verplaatsen Hoewel de computer is ontworpen voor flexibel dagelijks gebruik, dient u enkele eenvoudige voorzorgsmaatregelen te treffen wanneer u de computer verplaatst om te zorgen dat het systeem probleemloos blijft werken. Zorg dat alle schijfactiviteit is gestopt voordat u de computer verplaatst. Schakel de computer uit (afsluiten).
Veiligheidspictogrammen Veiligheidspictogrammen worden in deze handleiding gebruikt om u attent te maken op belangrijke informatie. Elk type mededeling wordt aangeduid zoals hieronder wordt geïllustreerd. Duidt op een potentieel gevaarlijke situatie die bij veronachtzaming van de instructies kan leiden tot ernstig of dodelijk letsel.
Hoofdstuk 2 Aan de slag Dit hoofdstuk bevat een controlelijst voor de apparatuur en alle basisgegevens om met uw computer aan de slag te gaan. Sommige voorzieningen die in deze handleiding worden toegelicht, functioneren wellicht niet correct als u een besturingssysteem gebruikt dat niet vooraf door TOSHIBA is geïnstalleerd. Controlelijst van apparatuur Pak de computer voorzichtig uit en bewaar de doos en het verpakkingsmateriaal voor toekomstig gebruik.
Klikken Tik op het touchpad of klik eenmaal op de linker touchpadbesturingsknop. Klik eenmaal met de linkermuisknop. Tik eenmaal op het aanraakscherm (alleen modellen met een aanraakscherm). Klikken met de rechtermuisknop Klik eenmaal op de rechter touchpadbesturingsknop. Klik eenmaal met de rechtermuisknop. Tik op het aanraakscherm en laat uw vinger staan (alleen voor modellen met een aanraakscherm). Dubbelklikken Tik tweemaal op het touchpad of klik tweemaal op de linker touchpadbesturingsknop.
Eerste configuratie Kennismaken met Windows Gebruik een programma voor viruscontrole en zorg ervoor dat dit regelmatig wordt bijgewerkt. Formatteer opslagmedia nooit zonder eerst de inhoud ervan te controleren. Tijdens het formatteren gaan alle opgeslagen gegevens verloren. Het is verstandig om af en toe een back-up op externe media te maken van de interne vaste schijf of van een ander primair opslagapparaat.
Gebruik of koop altijd netsnoeren die overeenstemmen met de wettelijke specificaties en voorschriften met betrekking tot spanning en frequentie die gelden in het land van gebruik. Als u dat niet doet, kunnen er brand of elektrische schokken optreden met mogelijk ernstig letsel tot gevolg. Het meegeleverde netsnoer voldoet aan de veiligheidsregels en voorschriften in de regio waarin de computer wordt verkocht en mag niet buiten deze regio worden gebruikt.
Een 2- of 3-pins adapter/snoer wordt met de computer meegeleverd, afhankelijk van het model. 2. Steek de gelijkstroomuitgangsstekker van de netadapter in de gelijkstroomingang (DC IN 19V) op de computer. Afbeelding 2-3 De gelijkstroomuitgangsstekker op de computer aansluiten 1 2 1. Gelijkstroomingang (19 V) 3. 2. Gelijkstroomuitgangsstekker Steek het netsnoer in een stopcontact. Het DC IN-/acculampje gaat branden.
Klap het beeldscherm niet dicht als er pennen of soortgelijke voorwerpen tussen het beeldscherm en het toetsenbord zijn achtergebleven. Wanneer u het beeldscherm open- of dichtklapt, moet u een hand op de polssteun plaatsen om de computer op zijn plaats te houden en gebruikt u de andere hand om het beeldscherm voorzichtig open of dicht te klappen (gebruik niet te veel kracht bij het open- of dichtklappen van het beeldscherm).
Eerste configuratie Het opstartscherm van Windows 8 wordt als eerste weergegeven wanneer u de computer aanzet. Volg de aanwijzingen in elk scherm om het besturingssysteem te installeren. Lees zorgvuldig de Licentievoorwaarden door wanneer deze worden weergegeven. Kennismaken met Windows Voor meer informatie over nieuwe onderdelen en het gebruik van Windows 8 raadpleegt u Help en ondersteuning van Windows.
Tegels Tegels zijn toegankelijk en kunnen worden gestart via het startscherm. Het startscherm bevat gewoonlijk de tegels Bureaublad en E-mail en tegels voor alle andere toepassingen die naar uw systeem zijn gedownload. Windows Store Hoewel veel toepassingen vooraf op uw computer zijn geïnstalleerd of zijn ingebouwd, kunt u ook veel andere toepassingen downloaden met één klik met de muis. In de Windows Store kunt u zoeken en bladeren naar duizenden apps, gegroepeerd in overzichtelijke categorieën.
De computer opnieuw opstarten In bepaalde omstandigheden moet u de computer opnieuw instellen (ofwel een reset uitvoeren), bijvoorbeeld: Als u bepaalde computerinstellingen hebt gewijzigd. Als u de computer opnieuw moet opstarten, zijn er twee manieren om dit te doen: Klik in de charm Instellingen op Energie en selecteer Opnieuw opstarten.
Als de netadapter is aangesloten, wordt de computer in de slaapstand gezet op basis van de instellingen in Energiebeheer (dat u opent via Bureaublad -> Desktop Assist -> Configuratiescherm -> Systeem en beveiliging -> Energiebeheer). Als u de werking van de computer wilt herstellen nadat de slaapstand is geactiveerd, houdt u de aan/uit-knop of een toets op het toetsenbord gedurende korte tijd ingedrukt.
Als u de computer via de accu gebruikt, kunt u de gebruiksduur verlengen door af te sluiten in de sluimerstand, aangezien de slaapstand meer energie gebruikt als de computer uit staat. Beperkingen van de slaapstand In de volgende omstandigheden werkt de slaapstand niet: De computer wordt onmiddellijk na het afsluitproces weer aangezet. Geheugenschakelingen zijn blootgesteld aan statische elektriciteit of elektrische ruis.
Sluimerstand activeren Voer de volgende stappen uit om de sluimerstand in te schakelen: 1. 2. Klik op de charm Instellingen. Klik op Energie en selecteer Sluimerstand. Als u Sluimerstand wilt weergeven in het menu Energie, moet u de volgende stappen uitvoeren: 1. Klik op Bureaublad -> Desktop Assist -> Configuratiescherm -> Systeem en beveiliging -> Energiebeheer. 2. Klik op Het gedrag van de aan/uit-knop bepalen of Het gedrag van het sluiten van het deksel bepalen. 3.
Hoofdstuk 3 Rondleiding In dit hoofdstuk worden de verschillende onderdelen van de computer beschreven. Het wordt aanbevolen vertrouwd te raken met elk onderdeel voordat u de computer gebruikt. Wettelijke voetnoot (niet-toepasselijke pictogrammen) Raadpleeg het gedeelte Wettelijke voetnoten voor meer informatie over niet-toepasselijke pictogrammen. Ga voorzichtig om met de computer om krassen of beschadiging van het oppervlak te voorkomen.
Aan/uit-lampje Het aan/uit-lampje brandt wit als de computer aanstaat. Als u de computer echter in de slaapstand zet, knippert dit lampje wit. Lampje voor draadloze communicatie Het lampje voor draadloze communicatie brandt oranje wanneer de functies voor Bluetooth of draadloos LAN zijn ingeschakeld. Alleen sommige modellen zijn voorzien van functies voor Bluetooth en draadloos LAN.
Gelijkstroomingang (19 V) De netadapter wordt op deze ingang aangesloten om de computer van stroom te voorzien en om de interne accu's te laden. Let erop dat u alleen het type netadapter gebruikt dat bij de computer is geleverd ten tijde van de aankoop. Het gebruik van een verkeerde netadapter kan de computer beschadigen. Universal Serial Buspoort (USB 2.0) Eén USB-poort, die voldoet aan de USB 2.0standaard, bevindt zich in de linkerkant van de computer. De USB 2.0-poort is niet compatibel met USB 3.
Afbeelding 3-3 Rechterkant van de computer 1 2 3 4 5 6 1. Hoofdtelefoonaansluiting 2. Microfoonaansluiting 3. Universal Serial Bus-poort (USB 2.0 of 3.0)* 4. Universal Serial Bus-poort (USB 2.0) 7 8 5. HDMI-uit-poort* 6. LAN-aansluiting* 7. Poort voor externe RGB-monitor* 8. Luchtopeningen * Aanwezig op sommige modellen. De vormgeving van het product verschilt per model. Hoofdtelefoonaansluiting Op de 3,5-mm mini-hoofdtelefoonaansluiting kan een stereohoofdtelefoon worden aangesloten.
Universal Serial Buspoort (USB 2.0) Eén USB-poort, die voldoet aan de USB 2.0standaard, bevindt zich in de rechterkant van de computer. De USB 2.0-poort is niet compatibel met USB 3.0-apparaten. HDMI-uit-poort Op de HDMI-uit-poort kan een HDMI-kabel met een type A-stekker worden aangesloten. LAN-aansluiting Via deze poort kunt u de computer op een LAN aansluiten.
Accu-eenheid De oplaadbare lithium-ion accu-eenheid voorziet de computer van stroom wanneer de netadapter niet is aangesloten. Raadpleeg het gedeelte Accu voor meer informatie over het gebruik en de werking van de accu-eenheid. Onderkant De volgende afbeeldingen illustreren de onderkant van de computer. Zorg ervoor dat het beeldscherm gesloten is voordat de computer wordt omgedraaid om schade te voorkomen. Afbeelding 3-5 Onderkant van de computer 2 1 3 4 1. Accuvergrendeling 2.
Sleuf voor geheugenmodule In deze sleuven kunt u een extra geheugenmodule plaatsen, vervangen en verwijderen. De grootte van de geheugenmodules is afhankelijk van het model. De daadwerkelijke hoeveelheid bruikbaar systeemgeheugen is minder dan de geïnstalleerde geheugenmodules. Raadpleeg het gedeelte Aanvullende geheugenmodule. Luchtopeningen De luchtopeningen helpen oververhitting van de processor voorkomen. U mag de luchtopeningen niet blokkeren.
Afbeelding 3-6 De voorkant van de computer met geopend beeldscherm 3 4 5 2 1 9 7 6 10 9 7 11 13 8 12 3 1 4 2 9 7 6 10 9 7 11 13 8 12 1. Antennes voor draadloze communicatie (niet zichtbaar)* 2. Microfoon* 3. Webcamlampje* 4. Webcam* 5. Microfoon* 6. Beeldscherm 7. Beeldschermscharnieren 8. Toetsenbord 9. Luidsprekers 10. Aan/uit-knop 11. Touchpad 12. Touchpadbesturingsknop 13. Touchpadbesturingsknop * Aanwezig op sommige modellen. De vormgeving van het product verschilt per model.
Wettelijke voetnoot (draadloos LAN) Raadpleeg het gedeelte Wettelijke voetnoten voor meer informatie over draadloos LAN. Microfoon Met de ingebouwde microfoon kunt u geluid voor uw toepassing importeren en opnemen. Raadpleeg het gedeelte Geluidssysteem en videomodus voor meer informatie. Webcamlampje Het webcamlampje brandt wanneer de webcam wordt gebruikt. Webcam Een webcam is een apparaat waarmee u video kunt opnemen of foto's kunt maken met uw computer.
Toetsenbord Het toetsenbord van de computer bevat tekentoetsen, besturingstoetsen, functietoetsen en speciale Windows-toetsen die alle functionaliteit bieden van een volledig toetsenbord. Raadpleeg het gedeelte Het toetsenbord voor meer informatie. Stereoluidsprekers Via de luidsprekers kunt u het geluid horen dat door uw software wordt gegenereerd, en de geluidssignalen die door het systeem worden gegenereerd, bijvoorbeeld als de accu bijna leeg is.
Wettelijke voetnoot (CPU) Raadpleeg het gedeelte Wettelijke voetnoten voor meer informatie over de CPU. Vaste schijf of solidstate drive De capaciteit van de vaste schijf is afhankelijk van het model. Als u wilt controleren welk type vaste schijf/SSD uw model bevat, opent u TOSHIBA PC Health Monitor door te klikken op Bureaublad -> Desktop Assist -> Ondersteuning & herstel -> PC Health Monitor en klikt u daarna op Pcgegevens.
Video-RAM Het geheugen in de grafische kaart van een computer, dat wordt gebruikt om het beeld op te slaan dat wordt weergegeven op een bitmapscherm. De beschikbare hoeveelheid video-RAM is afhankelijk van het systeemgeheugen van de computer. Bureaublad -> Desktop Assist -> Configuratiescherm -> Vormgeving en persoonlijke instellingen -> Beeldscherm -> Resolutie aanpassen. U kunt de hoeveelheid video-RAM controleren door te klikken op de knop Geavanceerde instellingen in het venster Schermresolutie.
de accu. Dit schakelen gebeurt automatisch en hiervoor hoeft de gebruiker de computer niet opnieuw op te starten. In het menu Manage 3D Settings (3D-instellingen beheren) van het NVIDIA-regelpaneel kunt u de algemene 3D-instellingen wijzigen en uitzonderingen creëren voor bepaalde programma's. Deze uitzonderingen worden automatisch gebruikt wanneer de opgegeven programma's worden gestart. Gebruik de standaardinstelling voor de NVIDIA Optimus-technologie.
van de computer kan verminderen door het beeldcontrast op het interne LCD-scherm te optimaliseren. Deze functie kan worden gebruikt als de computer: wordt gebruikt in de accumodus alleen het interne LCD-scherm gebruikt De energiebesparingstechnologie voor beeldschermen is standaard ingeschakeld. U kunt deze functie desgewenst uitschakelen. U kunt de functie voor de energiebesparingstechnologie voor beeldschermen uitschakelen in het regelpaneel Intel ® HD Graphics/Intel® Graphics and Media.
Klik met de rechtermuisknop op het bureaublad en klik op AMD VISION Engine Control Center/Catalyst Control Center. In dit venster: 1. 2. Selecteer PowerPlay™ onder Power (Stroom). Schakel het selectievakje Enable PowerPlay™ (PowerPlay inschakelen) in en schakel vervolgens het selectievakje Enable VariBright™ (Vari-Bright inschakelen) in.
Ingeschakeld Uitgeschakeld (buiten werking) Netadapter De resterende niet accucapaciteit is aangesloten boven het activeringsniveau voor lage acculading • In werking De resterende accucapaciteit is onder het activeringsniveau voor lage acculading • In werking De accu is leeg. De computer wordt uitgezet • Lampje: uit • Lampje: knippert oranje DC IN-/acculampje Controleer het DC IN-/acculampje om de status van de accu-eenheid te bepalen en de voedingsstatus wanneer de netadapter is aangesloten.
Wit Geeft aan dat de computer van stroom wordt voorzien en is ingeschakeld. Knippert wit Geeft aan de computer nog steeds in de slaapstand staat en dat er voldoende stroom is (adapter of accu) om in deze stand te blijven. Lampje brandt niet In alle andere omstandigheden is het lampje uit.
Hoofdstuk 4 Basisbeginselen In dit hoofdstuk worden de grondbeginselen van computergebruik beschreven en wordt toegelicht welke voorzorgsmaatregelen u daarbij dient te treffen. Het touchscreen gebruiken Sommige modellen zijn voorzien van een touchscreen. Met uw vinger kunt u pictogrammen, knoppen, menuopties, het schermtoetsenbord en andere items op het touchscreen aansturen. Tikken Tik eenmaal met uw vinger op het touchscreen om een item, zoals een app, te activeren.
Vegen Beweeg uw vinger snel vanaf een rand van het scherm zonder te pauzeren wanneer u het scherm voor het eerst aanraakt. Vegen vanaf de linkerrand: de laatst geopende apps en dergelijke weergeven. Vegen vanaf de rechterrand: de charms (Zoeken, Delen, Starten, Apparaten, Instellingen) openen of sluiten. Vegen vanaf de bovenrand: de opdrachtbalk van de app openen of sluiten. Voor meer informatie en meer geavanceerde touchscreenbewegingen voor gebruik met Windows 8 raadpleegt u Help en ondersteuning.
Vegen Beweeg uw vinger snel vanaf een rand van het touchpad zonder te pauzeren wanneer u het touchpad voor het eerst aanraakt. Vegen vanaf de linkerrand: de laatst geopende apps weergeven. Vegen vanaf de rechterrand: de charms (Zoeken, Delen, Starten, Apparaten, Instellingen) openen of sluiten. Vegen vanaf de bovenrand: de opdrachtbalk van de app openen of sluiten. Sommige van de hier beschreven touchpadbewerkingen worden alleen ondersteund in bepaalde toepassingen.
Afbeelding 4-1 Toetslampjes 2 1 1. CAPS LOCK-lampje 2. NUM LOCK-lampje CAPS LOCK Dit lampje brandt groen als de hoofdlettervergrendeling is ingeschakeld voor lettertoetsen. NUM LOCK Wanneer het NUM LOCK-lampje brandt, kunt u de cijfertoetsen van het toetsenbord gebruiken om cijfers in te voeren. Functietoets De functietoetsen (F1~F12) zijn de twaalf toetsen bovenaan op het toetsenbord.
Speciale functiemodus Standaard F1F12-modus Functie F4 FN + F4 Wijzigt het actieve beeldscherm. Als u twee beeldschermen tegelijk wilt gebruiken, moet u de resolutie van het interne beeldscherm instellen op dezelfde resolutie als die van het externe scherm. F5 FN + F5 Schakelt het touchpad in of uit. F6 FN + F6 Hiermee spoelt u het medium achteruit. F7 FN + F7 Hiermee speelt u media af of pauzeert u de weergave. F8 FN + F8 Hiermee spoelt u het medium vooruit.
Speciale Windows-toetsen Het toetsenbord is voorzien van twee toetsen die in Windows een speciale functie hebben: de Windows Start-toets activeert het menu Start, terwijl de toepassingstoets dezelfde functie heeft als de rechtermuisknop. Deze toets activeert het startscherm van Windows. Deze toets heeft dezelfde functie als de secundaire (rechter)muisknop.
Blu-ray™-schrijfstation BDXL™ Naast de bovenstaande indelingen ondersteunt het Blu-ray™-schrijfstation BDXL™ BD-R TL, BD-R QL en BD-RE TL. DVD-R DL- en DVD+R DL-schijven in bepaalde indelingen kunnen onleesbaar zijn. Schijfstations voor optische media gebruiken Het station van volledige grootte ondersteunt snelle uitvoering van programma's op een optische schijf. U kunt schijven van 12 cm of 8 cm zonder adapter gebruiken. Gebruik de DVD-afspeeltoepassing als u DVD-video's wilt bekijken.
3. Leg de schijf met het opschrift omhoog in de schijflade. Afbeelding 4-3 Een schijf plaatsen 1 1. Laserlens Wanneer de schijflade volledig is uitgeschoven, bedekt de rand van de computer de schijflade een stukje. Wanneer u de schijf in de lade plaatst, moet u de schijf daarom schuin houden. Zorg na het plaatsen van de schijf echter dat de schijf plat ligt. Raak nooit de laserlens of de omringende behuizing aan om onjuiste uitlijning te voorkomen.
Wanneer de schijflade een stukje wordt geopend, moet u even wachten totdat de schijf is opgehouden met draaien voordat u de schijflade volledig opentrekt. 2. 3. De schijf steekt iets uit over de zijkanten van de schijflade, zodat u hem kunt pakken. Til de schijf er voorzichtig uit. Duw zachtjes tegen het midden van de schijflade om deze te sluiten. Duw zachtjes tot de lade vastklikt.
DVD-RW-, DVD+RW- en DVD-RAM-schijven kunnen meermaals worden beschreven. Blu-ray™-discs Een BD-R, BD-R DL, BD-R TL of BD-R QL kan slechts eenmaal worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd. Een BD-RE, BD-RE DL of BD-RE TL kan meer dan eenmaal worden beschreven. Schijven beschrijven Met het DVD Super Multi-station of het Blu-ray™-combinatiestation kunt u gegevens schrijven naar CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW of DVD-RAM.
Schade die is veroorzaakt door het gebruik van hardware of software van andere leveranciers. Hedendaagse optische stations zijn onderhevig aan dusdanige technologische beperkingen dat er onverwachte schijf- of herschrijffouten kunnen optreden als gevolg van de schijfkwaliteit of problemen met de gebruikte apparaten. Het is dan ook raadzaam om ten minste twee kopieën te maken van belangrijke gegevens, voor het geval de opgenomen inhoud onverhoopt wordt veranderd of verloren gaat.
DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (voor 4- en 8-speed media) DVD-RAM (alleen DVD Super Multi-station): DVD-specificaties voor DVD-RAM-schijven voor versie 2.0, 2.1 of 2.2 Panasonic Corporation (voor 3x- en 5x-speed media) Hitachi Maxell, Ltd. (voor 3x- en 5x-speed media) BD-R: Panasonic Corporation BD-R DL: Panasonic Corporation BD-RE: Panasonic Corporation BD-RE DL: Panasonic Corporation BD-R TL: TDK.
Vermijd de volgende handelingen: Wisselen tussen gebruikers in het besturingssysteem. Gebruik van de computer voor andere functies zoals het gebruik van een muis of touchpad of het sluiten/openen van het beeldscherm. Een communicatietoepassing starten. Handelingen waardoor de computer wordt blootgesteld aan schokken of trillingen. Het installeren, verwijderen of aansluiten van externe apparaten zoals een geheugenkaart, USB-apparaat, externe monitor of een optisch digitaal apparaat.
Niet-afgesloten DVD's die zijn gemaakt op een gewone DVD-recorder kunnen mogelijk niet worden afgespeeld op de computer. Gebruik DVD-video's met een de regiocode 'gelijk aan de standaardfabrieksinstelling' (indien van toepassing) of 'alles'. Speel geen video af terwijl u met een ander programma een televisieprogramma kijkt of opneemt. Hierdoor kunnen fouten ontstaan in de weergave van de video of de opname van het televisieprogramma.
Beeldschermen en geluid Als het videobeeld niet wordt weergegeven op het externe beeldscherm of de televisie, stopt u TOSHIBA VIDEO PLAYER en wijzigt u de schermresolutie. U wijzigt de schermresolutie door te klikken op Bureaublad -> Desktop Assist -> Configuratiescherm -> Vormgeving en persoonlijke instellingen -> Beeldscherm -> Resolutie aanpassen. Video kan echter niet worden uitgevoerd naar sommige externe schermen en televisie vanwege de uitvoer- of weergaveomstandigheden.
TOSHIBA Blu-ray Disc Player Wanneer u TOSHIBA Blu-ray Disc Player gebruikt, dient u rekening te houden met de volgende beperkingen: Opmerkingen betreffende het gebruik Deze software kan alleen worden gebruikt in Windows 8. Tijdens de weergave van inhoud met een hoge bitsnelheid kunnen frames wegvallen, kan het geluid overslaan of kunnen de computerprestaties afnemen. Sluit alle andere toepassingen voordat u een afspeelt.
Blu-ray™-stations en de bijbehorende media worden vervaardigd conform de specificaties van drie verkoopgebieden. Regiocodes kunnen worden ingesteld via TOSHIBA Blu-ray Disc Player. (Klik in het weergavegebied op de knop Setting (Instelling) en klik op het menu Region (Regio)). Om problemen bij het afspelen van Blu-ray™video's te voorkomen, dient u bij de aanschaf ervan te controleren of de disc geschikt is voor uw station.
U opent de handleiding van TOSHIBA Blu-ray Disc Player als volgt. Druk op de toets F1 wanneer TOSHIBA Blu-ray Disc Player is gestart en klik op de knop Help. 3D-weergave op een extern 3D-apparaat 3D-weergave op een extern 3D-apparaat is alleen mogelijk bij sommige modellen. Het effect van 3D kan alleen worden weergegeven op externe 3Dapparaten die zijn aangesloten op een HDMI-uitgang. Het kan niet worden weergegeven op het interne beeldscherm.
De functie voor 2D-naar-3D-conversie gebruikt TOSHIBA’s originele algoritme om een 3D-effect toe te passen op uw eigen 2D-video's. Deze functie biedt echter niet dezelfde soort video-inhoud als een video die oorspronkelijk wordt aangeboden in 3D en maakt geen nieuwe video in de 3D-indeling, maar speelt enkel 2D-video's af in een 3D-achtige modus. De functie voor 2D-naar-3D-conversie is bedoeld om u desgewenst in 3D te kunnen laten genieten van uw eigen 2D-homevideo's en van andere 2D-inhoud die u maakt.
3D-video-inhoud kan alleen worden afgespeeld op een extern beeldscherm via HDMI 'met 3D'. Het 3D-effect verschilt per persoon. Kijken naar 3D-beelden kan een onaangenaam gevoel veroorzaken. Stop in dat geval met kijken en raadpleeg een arts. Overweeg voordat u een kind toestaat om naar 3D-inhoud te kijken, of dit wel geschikt voor hem of haar is en of u de kijkduur moet beperken. Afhankelijk van de verlichtingsomstandigheden van de kamer kunt u flikkeringen waarnemen wanneer u de 3D-bril draagt.
De speler is standaard ingesteld op de 2D-indeling. Pas als u drukt op de knop van de functie voor 2D-naar-3D-conversie, activeert u deze functie en geeft u aan dat u uw 2D-inhoud in 3D wilt weergeven. De speler voert de functie voor 2D-naar-3D-conversie niet automatisch uit. Raadpleeg de waarschuwingen in dit gedeelte met betrekking tot mogelijke schending van het auteursrecht en zorg dat u over de benodigde toestemming beschikt.
De 3D-instellingen kunnen worden gewijzigd in het venster 'Settings' (Instellingen), maar het wordt ten zeerste aanbevolen de standaardinstellingen te gebruiken. Als u de instellingen wijzigt, kan het stereoscopische 3D-effect sterker worden, wat kan leiden tot vermoeide ogen. Het 3D-effect verschilt per persoon. Stop de weergave en controleer de instellingen van de apparatuur als u dubbele videobeelden ziet of het stereoscopische 3D-effect niet ziet wanneer u 3D-videobeelden kijkt.
Let erop dat als u de computer in de sluimerstand zet, de geheugeninhoud op de vaste schijf zal worden opgeslagen, hoewel het uit veiligheidsoverwegingen verstandig is uw gegevens ook handmatig op te slaan. RTC-batterij (batterij voor de real-time klok) De RTC-batterij (Real Time Clock) voorziet de interne real-time klok en kalender van stroom en handhaaft de systeemconfiguratie als de computer is uitgeschakeld.
Installeer of verwijder de accu-eenheid nooit voordat de computer is uitgeschakeld en de netadapter is ontkoppeld. Verwijder de accueenheid nooit terwijl de slaapstand op de computer is geactiveerd. Doet u dit toch, dan kunnen gegevens verloren gaan. Verwijder de accu-eenheid nooit terwijl de functie Activering op LAN is ingeschakeld aangezien er dan gegevens verloren gaan. Schakel de functie Activering op LAN uit alvorens de accu-eenheid te verwijderen.
Let erop dat de oplaadtijd als de computer is ingeschakeld, wordt beïnvloed door de omgevingstemperatuur, de temperatuur van de computer en hoe u de computer gebruikt. Als u bijvoorbeeld intensief gebruik maakt van externe apparaten, wordt de accu tijdens gebruik wellicht nauwelijks opgeladen.
Bij herhaald ontladen en opladen zal de capaciteit van de accu geleidelijk afnemen. Een veelgebruikte oudere accu zal derhalve niet zo lang werken als een nieuwe accu, zelfs indien beide volledig opgeladen zijn.
Type accu Slaapstand Afsluitmodus Accu-eenheid circa 4 dagen circa 63 dagen (67 Wh, 6 cellen met hoge capaciteit) Gebruiksduur van de accu verlengen U kunt de gebruiksduur van de accu-eenheid als volgt verlengen: Ontkoppel de computer ten minste eenmaal per maand van de voedingsbron en gebruik het systeem op accu-energie totdat de accueenheid helemaal leeg is. Voer eerst de volgende stappen uit: 1. Schakel de computer uit. 2. Koppel de netadapter los en schakel de computer in.
Verwijder de accu-eenheid niet terwijl de computer in de slaapstand staat. Gegevens worden in het RAM opgeslagen, dus als de stroomvoorziening naar de computer wordt afgebroken, gaan de gegevens mogelijk verloren. In de slaapstand gaan gegevens verloren als u de accu-eenheid verwijdert of de netadapter ontkoppelt voordat het opslagproces is voltooid.
De accu installeren Voer de volgende stappen uit om een accu-eenheid te installeren: Raak de accu-ontgrendelingsschuif niet aan terwijl u de computer vasthoudt omdat de accu-eenheid er dan uit kan vallen doordat de accuhouder per ongeluk wordt ontgrendeld en letsel kan veroorzaken. 1. 2. 3. Schuif de accu zo ver als het gaat in de computer. Zorg dat de accu-eenheid correct is geplaatst en dat de accuvergrendeling in de vergrendelde stand staat. Draai de computer om.
Gebruikt u Ethernet LAN (10 megabits per seconde, 10BASE-T), dan kunt u de computer aansluiten met een CAT3-kabel of hoger. De LAN-kabel aansluiten Voer de volgende stappen uit om de LAN-kabel los te koppelen: Sluit de netadapter aan alvorens de LAN-kabel aan te sluiten. Tijdens LAN-gebruik moet de netadapter aangesloten blijven. Als u de netadapter ontkoppelt terwijl de computer gegevens uitwisselt met een LAN, wordt de verbinding wellicht verbroken. Sluit uitsluitend LAN-kabels aan op de LAN-poort.
Raak geen andere interne computeronderdelen aan als u een geheugenmodule installeert of verwijdert. Gebruik alleen geheugenmodules die zijn goedgekeurd door TOSHIBA. U mag een geheugenmodule niet installeren of verwijderen in de volgende omstandigheden: a. De computer is ingeschakeld. b. De computer is afgesloten in de slaapstand of de sluimerstand. c. Activering op LAN is actief. d. De functie voor draadloze communicatie is ingeschakeld.
6. Schuif uw nagel of een dun voorwerp onder het plaatje en til het op. Afbeelding 4-8 Het afdekplaatje van de geheugenmodule verwijderen 2 1 1. Schroef 2. Afdekplaatje geheugenmodule De vormgeving van het product verschilt per model.
7. Breng het uitstekende gedeelte van de geheugenmodule op één lijn met de geheugensleuf en plaats de voorzichtig in de sleuf onder een hoek van ongeveer 30 graden. Duw de module vervolgens omlaag tot deze aan weerszijden vastklikt. Afbeelding 4-9 De geheugenmodule plaatsen 1 2 3 1. Inkeping 2. Sleuf B 3. Sleuf A De vormgeving van het product verschilt per model. Let erop dat er nooit metalen voorwerpen, zoals schroeven, nietjes of paperclips in de computer terechtkomen.
8. Plaats het afdekplaatje van de geheugenmodule terug en bevestig het met de schroef. Zorg ervoor dat het afdekplaatje goed vastzit. Afbeelding 4-10 Het afdekplaatje over de geheugenmodule plaatsen 1 2 1. Afdekplaatje geheugenmodule 2. Schroef De vormgeving van het product verschilt per model. 9. Installeer de accu-eenheid. Raadpleeg zo nodig het gedeelte De accueenheid vervangen. 10. Draai de computer om. 11.
8. Pak de module bij de randen vast en verwijder hem uit de computer. Bij langdurig computergebruik worden de geheugenmodules en de nabijgelegen schakelingen heet. Laat de geheugenmodules in dat geval afkoelen tot kamertemperatuur alvorens ze te hanteren. Als u de modules eerder aanraakt, kunt u zich branden. Raak de connectoren op de geheugenmodule en op de computer niet aan. Vuil op de connectoren kan problemen met de toegang tot het geheugen veroorzaken.
computer beschadigd raakt en er brand ontstaat, met mogelijk ernstig letsel tot gevolg. Voor gebruik van een miniSD/microSD-kaart is een adapter vereist. Houd er rekening mee dat niet alle geheugenmedia zijn getest op een correcte werking. Er kan derhalve niet worden gegarandeerd dat alle geheugenmedia probleemloos functioneren. De sleuf ondersteunt geen Magic Gate-functies.
De maximale capaciteit van SD-geheugenkaarten is 2 GB. De maximale capaciteit van SDHC-geheugenkaarten is 32 GB. De maximale capaciteit van SDXC-geheugenkaarten is 64 GB. Formattering van geheugenmedia Nieuwe mediakaarten worden geformatteerd volgens specifieke normen. Als u een mediakaart opnieuw wilt formatteren, gebruik hiervoor dan een apparaat dat mediakaarten kan gebruiken. Een geheugenkaart formatteren Wanneer u een geheugenkaart koopt, is deze reeds geformatteerd conform specifieke normen.
De schrijfbeveiliging Geheugenkaarten hebben een schrijfbeveiliging. SD-kaart (SD-geheugenkaart, SDHC-geheugenkaart, SDXCgeheugenkaart) Zet de schrijfbeveiligingsschakelaar in de vergrendelde stand als u geen gegevens wilt vastleggen. Geheugenmedia plaatsen De volgende instructies zijn van toepassing op alle soorten ondersteunde media. Voer de volgende stappen uit als u een geheugenmedium wilt plaatsen: 1. 2. 3.
1. 2. 3. Klik op de tegel Bureaublad en open het pictogram Hardware veilig verwijderen en media uitwerpen op de Windows-taakbalk. Selecteer geheugenmedia. Verwijder nu het medium. Als u het geheugenmedium verwijdert of de computer uitschakelt terwijl de computer het geheugenmedium gebruikt, bestaat de kans dat gegevens op het medium verloren gaan of beschadigd raken. Verwijder een geheugenmedium niet terwijl de computer in de slaapstand of de sluimerstand staat.
De poort voor een externe RGB-monitor bevat geen bevestigingsschroeven voor een monitorkabel. Monitorkabels met bevestigingsschroeven kunnen echter wel worden gebruikt. 2. Zet de externe monitor aan. Wanneer u de computer aanzet, wordt de monitor automatisch herkend en wordt vastgesteld of het een kleuren- of monochrome monitor betreft.
In de volgende omstandigheden mag u een HDMI-apparaat niet aansluiten of loskoppelen: Het systeem wordt opgestart. Het systeem wordt afgesloten. Wanneer u een televisie of externe monitor aansluit op de HDMI-poort, moet het beelduitvoerapparaat zijn ingesteld op HDMI. Wanneer u de HDMI-kabel loskoppelt en weer aansluit, dient u minstens 5 seconden te wachten voordat u de HDMI-kabel weer aansluit. Wanneer u het beelduitvoerapparaat wijzigt, wordt het afspeelapparaat mogelijk niet automatisch gewijzigd.
6. 7. Klik op Alle modi weergeven. Selecteer een van de volgende modi bij Alle modi weergeven. De beeldscherminstellingen wijzigen Nadat een of meer externe beeldschermen zijn aangesloten, kan het besturingssysteem automatische de beeldscherminstellingen detecteren, identificeren en configureren. U kunt ook handmatig beheren hoe de externe schermen werken en de scherminstellingen wijzigen door op P te drukken terwijl u de Windowstoets ( ) ingedrukt houdt.
Geheugenkit DDR3/DDR3L-1600/1866-geheugenmodules kunnen gemakkelijk in de computer worden geïnstalleerd. Het beschikbare optionele geheugen hangt af van de TOSHIBA-autorisatie. Universele netadapter Als u de computer regelmatig op verschillende locaties gebruikt, is het wellicht een goed idee om voor elke locatie een extra netadapter te kopen: u hoeft de adapter dan niet telkens mee te nemen. Accu-eenheid Een extra accu-eenheid als reserve of ter vervanging.
natuurgetrouwe luisterbeleving te bieden die ooit mogelijk was in een configuratie met twee luidsprekers. DTS Studio Sound wordt bij sommige modellen geleverd.
Klik op Bureaublad -> Desktop Assist -> Configuratiescherm -> Hardware en geluiden -> Realtek HD Audio Manager. Wanneer u Realtek HD Audio Manager voor het eerst start, ziet u twee apparaattabs. Speakers (Luidsprekers) is het standaarduitvoerapparaat. Microphone is het standaardinvoerapparaat. Als u het standaardapparaat wilt wijzigen, klikt u op de knop Set Default Device (Standaardapparaat instellen) onder de tab van het gekozen apparaat.
Hoofdstuk 5 Hulpprogramma's en geavanceerd gebruik In dit hoofdstuk worden de hulpprogramma's en speciale voorzieningen van deze computer beschreven en wordt het geavanceerde gebruik van bepaalde hulpprogramma's toegelicht. Hulpprogramma's en toepassingen In deze paragraaf worden de op de computer voorgeïnstalleerde hulpprogramma's beschreven en er wordt toegelicht hoe u de programma's start. Raadpleeg indien van toepassing de online handleiding, de Helpbestanden of het bestand Leesmij.
TOSHIBAweergavehulpprogramma Het TOSHIBA-weergavehulpprogramma omvat het hulpprogramma Tekstgrootte bureaublad, het hulpprogramma Scherm splitsen en andere instellingen. Met Tekstgrootte bureaublad kunt u de tekst op het bureaublad groter of kleiner maken op basis van uw gebruik en voorkeur. U kunt de tekstgrootte op het scherm en in de titelbalk van vensters wijzigen door de tekstschaal te wijzigen.
TOSHIBA Met het hulpprogramma TOSHIBA Vasteschijfversnelling Vasteschijfversnelling kunt u de toegangssnelheid van de vaste schijf verbeteren door een deel van het hoofdgeheugen van de computer als cache te gebruiken. U opent dit hulpprogramma door te klikken op Bureaublad -> Desktop Assist -> Hulpprogramma's -> Systeeminstellingen -> Vasteschijfversnelling. TOSHIBA VIDEO PLAYER Deze software wordt meegeleverd voor het afspelen van DVD-video.
TOSHIBA Media Player van sMedio TrueLink+ Deze software is een multimediaspeler die kan worden gebruikt om video, muziek en foto's weer te geven. Toshiba Media Player kan inhoud afspelen uit een lokale bibliotheek, in een thuisnetwerk of op SkyDrive. U opent dit programma door te klikken op het pictogram Media Player op het startscherm. Raadpleeg de zelfstudie en online Help voor meer informatie.
TOSHIBA PC Health Monitor De toepassing TOSHIBA PC Health Monitor controleert diverse systeemfuncties, zoals stroomverbruik, accustatus en systeemkoeling, en informeert u over belangrijke systeemomstandigheden. Deze toepassing herkent het serienummer van het systeem en van afzonderlijke onderdelen en houdt specifieke activiteiten bij met betrekking tot het gebruik ervan. U opent dit hulpprogramma door te klikken op Bureaublad -> Desktop Assist -> Ondersteuning & herstel -> PC Health Monitor.
Beeldscherm automatisch uitschakelen *1 Met deze functie wordt het beeldscherm van de computer automatisch uitgeschakeld als het toetsenbord een bepaalde tijd niet is gebruikt. Het scherm wordt weer ingeschakeld als er een toets wordt ingedrukt. Dit kan worden ingesteld via Energiebeheer. Vaste schijf automatisch uitschakelen *1 Met deze functie wordt de vaste schijf automatisch uitgeschakeld als een bepaalde tijd geen activiteit op de vaste schijf heeft plaatsgevonden.
Slaapstand Als u uw werk moet onderbreken, kunt u met deze functie de computer uitschakelen zonder de software te hoeven sluiten De gegevens worden opgeslagen in het hoofdgeheugen van de computer, zodat u kunt verder werken waar u was gebleven wanneer u de computer weer aanzet. Sluimerstand Met deze functie kunt u de stroom naar de computer uitschakelen zonder de software te hoeven sluiten.
TOSHIBA-wachtwoordhulpprogramma Het TOSHIBA-wachtwoordhulpprogramma biedt twee niveaus van wachtwoordbeveiliging: Gebruiker en Supervisor. Wachtwoorden die met het TOSHIBA-wachtwoordhulpprogramma worden ingesteld, verschillen van het Windows-wachtwoord.
Eigenaarsreeks (tekstvak) U kunt dit vak gebruiken om tekst aan het wachtwoord te koppelen. Klik na het invoeren van de tekst op Toepassen of OK. Wanneer de computer wordt gestart, wordt deze tekst weergegeven samen met een melding waarin u om een wachtwoord wordt gevraagd. Gebruik BIOS Setup als u het wachtwoord voor de vaste schijf of een hoofdwachtwoord voor de vaste schijf wilt instellen, wijzigen of verwijderen. BIOS Setup starten. 1.
De computer starten met een wachtwoord Als u al een gebruikerswachtwoord hebt geregistreerd, is er één manier om de computer op te starten: Voer het wachtwoord handmatig in. Het wachtwoord is alleen nodig als de computer is afgesloten in de sluimertand of de opstartmodus. U hebt het niet nodig in de slaapstand en bij opnieuw starten. Voer de volgende stappen uit als u een wachtwoord handmatig wilt invoeren: 1. Schakel de computer in volgens de instructies in het gedeelte Aan de slag.
Sommige opties worden grijs weergegeven, zodat u de status ervan kunt controleren.
De functie die het beeldscherm automatisch uitschakelt, is uitgeschakeld terwijl TOSHIBA Media Player een videobestand of een diashow met foto's weergeeft. De functie Resolution+ is speciaal bedoeld voor de interne monitor. Schakel Resolution+ daarom uit als u een externe monitor gebruikt. Tijdens de weergave van inhoud met een hoge bitsnelheid kunnen frames wegvallen, kan het geluid overslaan of kunnen de computerprestaties afnemen.
4. Klik op de foto die u wilt weergeven. TOSHIBA Media Player van sMedio TrueLink+ openen De functies en het gebruik van TOSHIBA Media Player worden toegelicht in de handleiding van TOSHIBA Media Player. Voer de volgende stappen uit om de handleiding van TOSHIBA Media Player te openen: Klik op het pictogram Tutorials (Zelfstudies) op de startpagina van TOSHIBA Media Player.
Nadat u TOSHIBA PC Health Monitor hebt ingeschakeld, kunt u dit op elk gewenst moment uitschakelen door de software te verwijderen via Een programma verwijderen in Configuratiescherm. Hiermee wordt tevens alle verzamelde informatie van de vaste schijf/SSD verwijderd. De software TOSHIBA PC Health Monitor vergroot of wijzigt op geen enkele wijze de verplichtingen van Toshiba volgens de standaard beperkte garantie.
Vergeet niet de netadapter aan te sluiten wanneer u herstelmedia maakt. Sluit alle softwareprogramma's, behalve Recovery Media Creator. Voer geen programma's uit die de processor zwaar belasten, zoals een schermbeveiliging. Zorg dat de computer op volledige energie werkt. Gebruik geen energiebesparingsfuncties. Schrijf niet naar het medium terwijl anti-virussoftware actief is.
5. Nadat Recovery Media Creator is gestart, selecteert u het type medium en de titel die u naar het medium wilt kopiëren. Klik vervolgens op de knop Maken. De vooraf geïnstalleerde software herstellen met de gemaakte herstelmedia Als de vooraf geïnstalleerde bestanden beschadigd zijn, kunt u de computer in de oorspronkelijke staat herstellen met de herstelmedia die u hebt gemaakt.
5. Er wordt een menu weergegeven waarin u de instructies moet uitvoeren. Als u er eerder voor hebt gekozen de herstelpartitie te verwijderen en herstelmedia probeert te maken, wordt het volgende bericht weergegeven: 'Recovery Media Creator kan niet worden gestart omdat er geen herstelpartitie is.' Als er geen herstelpartitie is, kan Recovery Media Creator geen herstelmedia maken. Als u al een herstelschijf hebt gemaakt, kunt u hiermee de herstelpartitie herstellen.
1. 2. 3. 4. Klik op de charm Instellingen en klik op Pc-instellingen wijzigen. Klik op Algemeen onder Pc-instellingen. Blader omlaag naar Alles verwijderen en Windows opnieuw installeren en klik op Aan de slag. Volg de instructies op het scherm om het herstel te voltooien. Herstelschijven bestellen bij TOSHIBA* U kunt productherstelschijven voor uw notebook bestellen in de TOSHIBA Europe Backup Media Online Shop. * Houd er rekening mee dat deze service niet gratis is. 1. 2.
Hoofdstuk 6 Problemen oplossen TOSHIBA heeft met deze computer een duurzaam product willen maken, maar mochten zich problemen voordoen dan kunt u aan de hand van de procedures in dit hoofdstuk bepalen wat er aan de hand is. Het is raadzaam dat alle gebruikers kennis nemen van dit hoofdstuk omdat als zij weten wat er fout kan gaan, er bepaalde problemen kunnen worden vermeden.
Controleer of alle kabels op de juiste manier zijn aangesloten en stevig vastzitten. Loszittende kabels kunnen signaalfouten veroorzaken. Controleer alle verbindingskabels op losse draden en alle connectoren op losse pinnen. Controleer of een eventuele schijf correct is geplaatst Maak uitgebreide notities van uw bevindingen en bewaar deze in een permanent foutenlogboek. Hierdoor kunt u gemakkelijker aan de TOSHIBA-ondersteuning uitleggen wat de problemen zijn.
Software De problemen worden wellicht door uw software of schijfje veroorzaakt. Als u een softwarepakket niet kunt laden, is het medium of het programma misschien beschadigd. Probeer in dat geval een andere kopie van de software te laden. Als tijdens het gebruik van een softwarepakket een foutbericht verschijnt, raadpleegt u de softwaredocumentatie. Deze bevat meestal een gedeelte over probleemoplossing of een samenvatting van foutberichten.
2. 3. Selecteer het programma dat u wilt sluiten en klik op Taak beëindigen. Nadat het programma is gesloten, zou u moeten kunnen doorwerken. Zo niet, ga dan verder met de volgende stap. Sluit de overige programma’s een voor een door de programmanaam te selecteren en op Taak beëindigen te klikken. Nadat u alle programma's hebt gesloten, zou u verdere moeten kunnen werken. Zo niet, zet dan de computer uit en start opnieuw op. De computer wordt niet opgestart.
Voeding Toetsenbord Intern beeldscherm Vaste schijf Optisch station Geheugenkaart Aanwijsapparaat USB-apparaat Aanvullende geheugenmodule Geluidssysteem Externe monitor LAN Draadloos LAN Bluetooth Voeding Als de computer niet op een stopcontact is aangesloten, is de accueenheid de voornaamste voedingsbron.
Probleem Procedure Netadapter voorziet Controleer de aansluitingen en kijk of het netsnoer/ de computer niet van netadapter goed aan de computer vastzit en of het stroom. stopcontact in orde is. Controleer de toestand van het snoer en de aansluitpunten. Als het snoer versleten of beschadigd is, moet het worden vervangen, als de aansluitpunten vervuild zijn, reinigt u deze met een schone, droge doek.
Probleem Procedure De accu wordt niet opgeladen terwijl de netadapter is aangesloten. Als de accu helemaal ontladen is, begint het oplaadproces niet meteen. Wacht in dat geval enkele minuten voordat u het weer probeert. Wordt de accu nog steeds niet opgeladen, dan controleert u of het stopcontact stroom levert door er een ander apparaat op aan te sluiten. Controleer of de accu warm of koud aanvoelt.
RTC (Real Time Clock) Probleem Procedure De BIOS-instelling en systeemdatum/tijd zijn verloren gegaan. De RTC-batterij heeft geen lading meer. U moet de datum en tijd opnieuw instellen via BIOS Setup door de volgende stappen uit te voeren: 1. 2. 3. 4. 5. 6. Klik in de charm Instellingen op Energie en selecteer Opnieuw opstarten. Houd de toets F2 ingedrukt en laat de toets één seconde nadat de computer is ingeschakeld los. Het hulpprogramma BIOS Setup wordt geladen.
Probleem Procedure Er verschijnen vlekken op het beeldscherm. Deze vlekken kunnen zijn veroorzaakt door contact met het toetsenbord of het touchpad bij het sluiten van het scherm. Probeer de vlekken te verwijderen door het scherm voorzichtig af te vegen met een schone, droge doek of, als dit niet lukt, met een goed lcd-reinigingsmiddel. In dit laatste geval moet u altijd de instructies volgen bij de schermreiniger en het scherm goed laten drogen voordat u het sluit.
Probleem Procedure U krijgt geen toegang tot een CD/ DVD/Blu-ray Disc™ in het station Controleer of de stationslade goed is gesloten. Duw zachtjes totdat de lade vastklikt. Open de schijflade en controleer of de schijf goed is geplaatst. De schijf moet plat op het ladeoppervlak liggen met het opschrift omhoog. Een vreemd voorwerp in de schijflade kan verhinderen dat de laser de schijf leest. Zorg dat de laser niet wordt geblokkeerd. Verwijder eventuele voorwerpen. Controleer of de schijf vuil is.
Touchpad Probleem Procedure Het touchpad werkt niet. Controleer de apparaatinstellingen. Schermaanwijzer reageert niet wanneer het aanwijsapparaat wordt gebruikt In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbel aantikken (touchpad) werkt niet. Probeer in dit geval eerst om de dubbelkliksnelheid te wijzigen in het hulpprogramma voor muisbesturing. Klik op Bureaublad -> Desktop Assist -> Configuratiescherm -> Hardware en geluiden -> Muis.
USB-muis Probleem Procedure Schermaanwijzer reageert niet wanneer de muis wordt gebruikt. In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbelklikken werkt niet. Probeer in dit geval eerst om de dubbelkliksnelheid te wijzigen in het hulpprogramma voor muisbesturing. Koppel de muis los van de computer, sluit hem weer aan op een vrije USB-poort en zorg ervoor dat hij stevig vast zit. 1. 2. 3.
Probleem Procedure USB-apparaat werkt niet. Koppel het USB-apparaat los van de computer, sluit het weer aan op een vrije poort en zorg dat het stevig vast zit. Zorg ervoor dat de benodigde USBstuurprogramma's correct zijn geïnstalleerd. Raadpleeg hiervoor zowel de documentatie van de apparatuur als van het besturingssysteem. Geluidssysteem Raadpleeg naast de informatie in dit gedeelte ook de documentatie bij het audio-apparaat. Probleem Procedure Geen geluid hoorbaar.
Probleem Procedure Het scherm blijft leeg. Stel het contrast en de helderheid op de externe monitor bij. Druk op de functietoets om de beeldschermprioriteit te wijzigen, zodat deze niet alleen op het interne beeldscherm is ingesteld. Controleer of de externe monitor is aangesloten.
Draadloos LAN Probleem Procedure Kan geen toegang krijgen tot draadloos LAN Controleer of de functie voor draadloze communicatie van de computer is ingeschakeld. Als de problemen aanhouden, neemt u contact op met de LAN-beheerder. Bluetooth Probleem Procedure Kan geen toegang Controleer of de functie voor draadloze krijgen tot Bluetooth- communicatie van de computer is ingeschakeld. apparaat.
Technische ondersteuning van TOSHIBA Als u het probleem nog steeds niet kunt verhelpen en vermoedt dat het te maken heeft met de hardware, gaat u naar de TOSHIBA-website voor technische ondersteuning http://toshiba-europe.com of http:// www.toshiba.co.jp/worldwide/.
Hoofdstuk 7 Aanhangsel Specificaties Dit gedeelte geeft een overzicht van de technische kenmerken van de computer. Gewicht en afmetingen Bij de onderstaande fysieke afmetingen zijn uitstekende delen niet inbegrepen. De fysieke afmetingen hangen af van het gekochte model. Grootte Circa 380 (b) x 242 (d) x 28,4/33,35 (h) millimeter Circa 380 (b) x 242 (d) x 32,38/35,25 (h) millimeter (uitstekende delen niet inbegrepen).
Pintoewijzing van poort voor externe RGB-monitor 5 1 15 11 10 6 Pin Signaalnaam Beschrijving I/O 1 CRV Rood videosignaal O 2 CGV Groen videosignaal O 3 CBV Blauw videosignaal O 4 Gereserveerd Gereserveerd 5 GND Aarde 6 GND Aarde 7 GND Aarde 8 GND Aarde 9 +5 V Stroomvoorziening 10 GND Aarde 11 Gereserveerd Gereserveerd 12 SDA Gegevenssignaal I/O 13 HSYNC Signaal voor horizontale synchronisatie O 14 VSYNC Signaal voor verticale synchronisatie O 15 SCL
Stroomsterkte: Minimaal 2,5 ampère Certificeringsinstanties China: CQC VS en Canada: Goedgekeurd door UL en CSA Nee.
Australië Europa Goedgekeurd door AS Goedgekeurd door de desbetreffende instantie Canada China Goedgekeurd door CSA Goedgekeurd door CCC Informatie voor draadloze apparaten Onderlinge samenwerking tussen draadloze producten Het draadloze LAN is compatibel met LAN-systemen met de Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radiotechnologie en voldoet aan de volgende normen: De IEEE 802.
Ga naar http://www.pc.support.global.toshiba.com als u vragen hebt over het gebruik van de draadloos LAN- of Bluetooth-kaart van TOSHIBA. In Europa gaat u naar http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm Draadloze apparaten en uw gezondheid Net als andere radioapparaten stralen draadloze producten hoogfrequente (HF) elektromagnetische energie uit.
Schakel alle draadloze functies uit in de buurt van personen bij wie mogelijk een pacemaker of een ander medisch elektrisch apparaat is geïmplanteerd. Radiogolven kunnen de werking van de pacemaker of het medische apparaat beïnvloeden met mogelijk ernstig letsel tot gevolg. Volg de instructies van uw medische apparaat als u gebruikmaakt van een draadloze functie.
Draadloze communicatie is vaak gebonden aan plaatselijke voorschriften voor radiocommunicatie. Hoewel netwerkproducten voor draadloos LAN zijn ontworpen voor gebruik op de vrij toegankelijk band 2,4 GHz en 5 GHz, is het mogelijk dat onder plaatselijke radiovoorschriften beperkingen worden gesteld aan het gebruik van apparatuur voor draadloze communicatie.
Radioverbindingen U kunt eenvoudig verbindingen tot stand brengen tussen twee of meer apparaten, deze verbindingen worden gehandhaafd zelfs als de apparaten buiten het gezichtsveld van elkaar liggen. RFI-vereisten Dit apparaat werkt in het frequentiebereik 5,15 tot 5.25 GHz en kan daarom alleen binnenshuis worden gebruikt.
Beperkingen voor gebruik van de frequenties tussen 5150-5350 MHz in Europa Italië: - Voor privégebruik is algemene goedkeuring vereist als WAS/ RLAN's buiten de eigen locatie wordt gebruikt. Luxemburg: Geïmplementeerd Algemene goedkeuring is vereist voor netwerk- en servicelevering. Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2.
Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2. Gebruik is toegestaan voor lokale netwerken voor servicecommunicatie tussen luchtvaartpersoneel aanboord van een vliegtuig op het vliegveld en tijdens alle vluchtstadia. Gebruik is toegestaan voor openbare draadloze lokale netwerken aan boord van een vliegtuig tijdens de vlucht op een hoogte van meer dan 3000 m.
Het uitgestraalde uitgangsvermogen van het draadloze apparaat ligt ruimschoots onder de FCC-limieten voor blootstelling aan HF-straling. Niettemin dient het draadloze apparaat zodanig te worden gebruikt dat fysiek contact tijdens normaal gebruik tot een minimum beperkt blijft. In een normale gebruiksconfiguratie mag de afstand tussen de antenne en de gebruiker niet minder dan 20 cm zijn. Raadpleeg de gebruikershandleiding van de computer voor meer informatie over de locatie van de antenne.
tussen 2.400 en 2.483,5 MHz voor tweedegeneratiesystemen voor gegevenscommunicatie met laag vermogen zoals deze apparatuur. 1.
1. 2. 3. 4. 2.4: Deze apparatuur gebruikt een frequentie van 2,4 GHz. FH: Deze apparatuur gebruikt FH-SS-modulatie. 1: Het storingsbereik van deze apparatuur is minder dan 10 m. : Deze apparatuur gebruikt een frequentiebandbreedte van 2.400 MHz tot 2.483,5 MHz. Het is onmogelijk de bandbreedte van identificatiesystemen voor mobiele objecten te omzeilen. 4. Over de JEITA Draadloos LAN op 5 GHz ondersteunt het kanaal W52/W53/W56.
Cyprus Tsjechië Denemarken Estland Finland Frankrijk Duitsland Griekenland Hong Kong Hongarije IJsland India Indonesië Ierland Italië Japan Korea Letland Liechtenstein Litouwen Luxemburg Malta Monaco Nederland Noorwegen Filipijnen Polen Portugal Roemenië Slowakije Slovenië Spanje Zweden Zwitserland Verenigd Koninkrijk V.S.
gebruik van de computer bij temperaturen tussen 5°C en 30°C of hoge dan 25°C op grote hoogte. (Deze temperatuurlimieten zijn niet precies en kunnen afwijken al naar gelang het specifieke computermodel. Raadpleeg uw computerdocumentatie of de TOSHIBA-website op www.pcsupport.toshiba.com voor meer informatie.) De CPU-prestaties kunnen bovendien afwijken van de specificaties als gevolg van de ontwerpconfiguratie. In bepaalde omstandigheden kan het gebeuren dat de computer automatisch wordt uitgeschakeld.
computer kunnen weergeven, is er nog steeds slechts circa 3 GB geheugen beschikbaar voor het besturingssysteem. Computers die met een 64-bits besturingssysteem zijn geconfigureerd, hebben toegang tot maximaal 4 GB systeemgeheugen. Gebruiksduur van de accu De gebruiksduur van de accu varieert sterk al naar gelang factoren zoals productmodel, configuratie, toepassingen, energiebeheerinstellingen en gebruikte functies.
alleen geoptimaliseerd wanneer het apparaat op netstroom werkt. De prestaties zijn aanzienlijk minder wanneer de accu wordt gebruikt. De totaal beschikbare hoeveelheid grafisch geheugen is het totaal van, indien van toepassing, speciaal videogeheugen, systeemvideogeheugen en gedeeld systeemgeheugen. De hoeveelheid gedeeld videogeheugen hangt af van de grootte van het systeemgeheugen en andere factoren.
Dvd: Digital Versatile Disc DVD-R: Digital Versatile Disc-Recordable DVD-RAM: Digital Versatile Disc-Random Access Memory DVD-R DL: Digital Versatile Disc Recordable Double Layer DVD-ROM: Digital Versatile Disc-Read Only Memory DVD-RW: Digital Versatile Disc-ReWritable DVD+R DL: Digital Versatile Disc Recordable Double Layer FAT: File Allocation Table FCC: Federal Communications Commission GB: gigabyte GBps: gigabytes per seconde HDD: Hard Disk Drive (vaste schijf) HDMI: High-Defini
ROM: Read Only Memory RTC: Real Time Clock S/P DIF: Sony/Philips Digital Interface Format SD: Secure Digital SDHC: Secure Digital High Capacity SDRAM: Synchronous Dynamic Random Access Memory SSD: Solid-state drive TFT: Thin-Film Transistor URL: Uniform Resource Locator USB: Universal Serial Bus UXGA: Ultra Extended Graphics Array VGA: Video Graphics Array WAN: Wide Area Network WSXGA: Wide Super Extended Graphics Array WSXGA: Wide Super Extended Graphics Array Plus WUXGA: Wid
Index A C Aanwijsapparaat touchpad 3-10 Accu capaciteit controleren 4-25 energiebesparingsmodus 5-6 gebruiksduur verlengen 4-27 typen 4-22 Controlelijst van apparatuur 2-1 D DC IN lampje 3-1 DC IN-/acculampje 3-16 Documentatielijst 2-1 Accu-eenheid vervangen 4-27 Draadloze communicatie 7-5 Dubbel aanwijsapparaat touchpad 6-11 Acculampje 3-16 ASCII-tekens 4-6 DVD Super Multi-station gebruik 4-7 schrijven 4-10 B Batterij Real Time Clock 4-23 RTC-batterij 3-11 Beeldscherm automatisch uitschakelen 5-6 o
Geluidssysteem problemen 6-13 P Problemen accu 6-6 controlelijst voor hardware en systeem 6-4 dubbel aanwijsapparaat 6-10 externe monitor 6-13 geheugenkaart 6-10 geluidssysteem 6-13 Intern beeldscherm 6-8 netvoeding 6-5 probleem analyseren 6-2 Real Time Clock 6-8 toetsenbord 6-8 TOSHIBAondersteuning 6-15 touchpad 6-11 uitschakelen bij oververhitting 6-5 USB-apparaat 6-12 USB-muis 6-12 vaste schijf 6-9 voeding 6-5 H HDMI-uit-poort 3-5 Herstelmedia 5-16, 5-18 Herstelschijfstation 5-17 L LAN aansluiten 4-30
opstarten 5-6 supervisor 5-9 T Toetsenbord functietoetsen 4-4 Functietoetsen F1...