Benutzerhandbuch C70/C70t/C70D/C75/C75t/ C75D/L70/L70t/L70D/L70Dt/ S70/S70t/S70D/S70Dt
Inhaltsverzeichnis Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit Copyright, Haftungsausschluss und Marken ..................................... 1-1 Zulassungsbestimmungen ................................................................... 1-2 Videostandardhinweis .......................................................................... 1-7 OpenSSL Toolkit - Lizenzhinweise ...................................................... 1-8 ENERGY STAR® Programm .................................
Speichermedien ................................................................................... 4-36 Externer Monitor .................................................................................. 4-40 Sicherheitsschloss .............................................................................. 4-44 Optionales TOSHIBA-Zubehör ........................................................... 4-44 Soundsystem und Videomodus .........................................................
Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit In diesem Kapitel werden rechtliche sowie zulassungs- und sicherheitsrelevante Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Copyright, Haftungsausschluss und Marken Copyright ©2013 by TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig.
Marken Intel, Intel SpeedStep, Intel Core und Centrino sind Marken oder eingetragene Marken der Intel Corporation. AMD, das AMD Arrow-Logo, PowerPlay, Vari-Bright und Kombinationen davon sind Marken von Advanced Micro Devices, Inc. Windows, Microsoft und das Windows-Logo sind eingetragene Marken der Microsoft Corporation. Die Bluetooth®-Marke und -Logos sind eingetragene Marken im Besitz von Bluetooth SIG, Inc.
Gerät den Rundfunk- oder Fernsehempfang tatsächlich stört, kann durch Aus- und Einschalten festgestellt werden. In diesem Fall empfiehlt es sich, einen oder mehrere der folgenden Schritte auszuführen: Richten Sie die Antenne neu aus. Vergrößern Sie den Abstand zwischen dem Gerät und dem Empfänger. Schließen Sie das Gerät und den Empfänger an unterschiedliche Stromkreise an. Wenden Sie sich an den Händler oder an einen erfahrenen Rundfunk-/Fernsehtechniker.
Erklärung zur EU-Konformität Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien. Verantwortlich für die CE-Kennzeichnung ist TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Deutschland. Den vollständigen und offiziellen Text der EUKonformitätserklärung finden Sie auf der TOSHIBA-Website unter http://epps.toshibateg.com im Internet.
Für alle eventuellen Folgen, die aufgrund der Verwendung dieses Produkts in nicht geeigneten Arbeitsumgebungen entstehen könnten, ist TOSHIBA nicht verantwortlich.
Die folgenden Informationen gelten nur für die Mitgliedstaaten der EU: Entsorgung von Produkten Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
Diese Symbole sind bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie das Gerät gekauft haben. REACH - Konformitätserklärung Am 1. Juni 2007 trat die neue Chemikalienverordnung der Europäischen Union (EU), REACH, in Kraft. REACH steht für Registration, Evaluation, Authorization and Restriction of Chemicals (Registrierung, Bewertung, Zulassung und Beschränkung von Chemikalien).
ZUSÄTZLICHE INFORMATIONEN Z. B. ZU WERBETECHNISCHEN, INTERNEN ODER KOMMERZIELLEN VERWENDUNGSARTEN SOWIE LIZENZIERUNG ERHALTEN SIE VON MPEG LA, L.L.C. UNTER HTTP:// WWW.MPEGLA.COM. OpenSSL Toolkit - Lizenzhinweise LIZENZHINWEISE ============== Das OpenSSL Toolkit unterliegt einer Doppellizenz, das heißt, es gelten sowohl die Bedingungen der OpenSSL-Lizenz als auch die der ursprünglichen SSLeay-Lizenz für das Toolkit. Nachstehend finden Sie eine Übersetzung der Lizenztexte.
6. Weiterverbreitungen jeglicher Art müssen folgende Erklärung beinhalten: „Dieses Produkt enthält vom OpenSSL Project für den Einsatz im OpenSSL Toolkit entwickelte Software. (http://www.openssl.org/)“ DIESE SOFTWARE WIRD VOM OpenSSL PROJECT AUF DER BASIS „AS IS“ (SO WIE SIE IST) ZUR VERFÜGUNG GESTELLT.
Das Copyright bleibt im Besitz von Eric Young, deshalb dürfen CopyrightVermerke im Code nicht entfernt werden. Wird dieses Paket in einem Produkt verwendet, muss Eric Young als Autor der verwendeten Bibliotheksteile angegeben werden. Dies kann in Form einer Textmeldung bei Programmstart oder in der mit dem Paket bereitgestellten Dokumentation (online oder Text) erfolgen.
Die Lizenz- oder Verteilungsbedingungen jeder öffentlich verfügbaren Version oder Ableitung dieses Codes dürfen nicht geändert werden. Das heißt, dieser Code darf nicht einfach kopiert und einer anderen Verteilungslizenz unterstellt werden [einschließlich der GNU Public License. ] */ ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. In diesem Fall ist der Computer mit dem ENERGY STAR®-Logo gekennzeichnet, und es gelten die folgenden Angaben.
Entsorgung des Computers und der Akkus Entsorgen Sie diesen Computer entsprechend den örtlich geltenden Gesetzen und Vorschriften. Weitere Informationen erhalten Sie bei den zuständigen Behörden Ihrer Gemeinde. Dieser Computer enthält wiederaufladbare Batterien (Akkus). Nach längerer Verwendung können die Akkus die Ladung nicht mehr halten und müssen ersetzt werden. Akkus und Batterien gehören nicht in den Hausmüll. Schützen Sie die Umwelt.
Vorsichtsmaßnahmen CAUTION: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an das nächste autorisierte Service-Center, wenn Probleme mit diesem Modell auftreten. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden.
Eine Überhitzung von Computer oder Netzadapter könnte zu einem Systemausfall, zu Schäden an Computer oder Netzadapter oder zu einem Brand führen, was schwere Verletzungen zur Folge haben kann. Computerfreundliche Umgebung einrichten Stellen Sie den Computer auf einer ebenen Oberfläche ab, die ausreichend Platz für den Computer sowie das gesamte erforderliche Zubehör (z. B. Drucker) bietet. Lassen Sie genügend Platz um den Computer und die Peripheriegeräte herum, damit die Lüftung gewährleistet ist.
Auch das Gehäuse des Netzadapters wird bei längerer Verwendung warm. Dieser Zustand weist nicht auf eine Fehlfunktion hin. Ziehen Sie den Netzadapter ab und lassen Sie ihn abkühlen, bevor Sie ihn transportieren. Legen Sie den Netzadapter nicht auf hitzeempfindlichem Material ab, da dieses sonst beschädigt werden könnte. Schäden durch Druck- oder Stoßeinwirkung Setzen Sie den Computer keinem starken Druck aus und lassen Sie keine Gegenstände auf ihn fallen.
Schalten Sie den Computer aus, trennen Sie den Netzadapter und warten Sie, bis der Computer abgekühlt ist, bevor Sie ihn transportieren. Andernfalls kann es zu leichteren Verbrennungen kommen. Setzen Sie den Computer keinen Stößen aus. Andernfalls können es zu einer Beschädigung des Computers, zu Fehlfunktionen oder Datenverlusten kommen. Transportieren Sie den Computer nicht, wenn Karten installiert sind. Dies kann zu Schäden am Computer und/oder der Karte und zu einem Ausfall des Computers führen.
Bitte lesen. Ein Hinweis ist eine Anmerkung oder ein Ratschlag, der Ihnen bei der optimalen Nutzung Ihrer Geräte hilft.
Kapitel 2 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Einige der in diesem Handbuch beschriebenen Einrichtungen funktionieren eventuell nicht ordnungsgemäß, wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Rechtsklick Klicken Sie einmal mit der rechten Touchpad-Steuerungstaste. Klicken Sie einmal mit der rechten Maustaste. Berühren und halten Sie den Touchscreen (nur bei Modellen mit Touchscreen). Doppelklicken Tippen Sie zweimal auf das Touchpad oder klicken Sie zweimal mit der linken Touchpad-Steuerungstaste. Klicken Sie zweimal mit der linken Maustaste. Tippen Sie zweimal auf den Touchscreen (nur bei Modellen mit Touchscreen).
Kennenlernen von Windows Verwenden Sie ein Virensuchprogramm und aktualisieren Sie es regelmäßig. Formatieren Sie Speichermedien nie, ohne zuvor den Inhalt zu überprüfen - beim Formatieren werden alle gespeicherten Daten gelöscht. Es ist empfehlenswert, den Inhalt des eingebauten Festplattenlaufwerks oder anderer wichtiger Speichergeräte regelmäßig auf externen Medien zu sichern. Die allgemein verwendeten Speichermedien sind nicht dauerhaft stabil; unter bestimmten Umständen können Daten verloren gehen.
Verwenden Sie nur Netzkabel, die mit den Spannungs- und Frequenzwerten des Stromversorgungsnetzes im jeweiligen Land der Verwendung übereinstimmen. Andernfalls kann es zu einem Brand oder elektrischen Schlag und damit zu schweren Verletzungen kommen. Das mitgelieferte Netzkabel entspricht den Sicherheitsvorschriften und Bestimmungen in der Vertriebsregion, in der der Computer gekauft wurde, und sollte nicht außerhalb dieser Region verwendet werden.
Je nach Modell wird der Computer entweder mit einem 2-Kontakt-Stecker/Kabel oder mit einem 3-Kontakt-Stecker/-Kabel geliefert. 2. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in die Gleichstrom-Eingangsbuchse DC IN 19V des Computers. Abbildung 2-3 Gleichstromausgangsstecker an den Computer anschließen 1 2 1. 19-V-Gleichstromeingang (DC IN) 3. 2. Gleichstromausgangsstecker Stecken Sie das Netzkabel in eine Steckdose – die Anzeige DC IN/ Akku sollte leuchten.
Klappen Sie den Bildschirm nicht zu weit auf, da hierbei die Scharniere des Bildschirms zu großen Belastungen ausgesetzt werden und es zu Beschädigungen kommen kann. Drücken Sie nicht auf den Bildschirm. Heben Sie den Computer nicht am Bildschirm hoch. Schließen Sie den Bildschirm nicht, wenn sich Stifte oder andere Gegenstände zwischen dem Bildschirm und der Tastatur befinden.
Ersteinrichtung Der Einrichtungsbildschirm von Windows 8 ist der erste Bildschirm, der nach dem Einschalten angezeigt wird. Befolgen Sie die Anweisungen auf dem Bildschirm, um das Betriebssystem korrekt zu installieren. Lesen Sie die Lizenzbedingungen sorgfältig durch, wenn sie angezeigt werden. Kennenlernen von Windows Ausführliche Informationen zu den Neuerungen und zur Verwendung von Windows 8 finden Sie unter Windows-Hilfe und Support.
Geräte Mit diesem Charm können Sie Ihre Hardwaregeräte verwalten. Einstellungen Mit diesem Charm können Sie die Systemeinstellungen verwalten. Kacheln Kacheln können Sie vom Startbildschirm aus aufrufen. Häufig verwendete Startbildschirmkacheln sind „Desktop“ und „Mail“ sowie Kacheln für alle Anwendungen, die Sie auf das System heruntergeladen haben.
5. Schalten Sie die an den Computer angeschlossenen Peripheriegeräte aus. Schalten Sie die Computer oder die Peripheriegeräte nicht sofort wieder an, sondern warten Sie einen Moment, um Beschädigungen zu vermeiden. Neustarten des Computers Unter bestimmten Bedingungen müssen Sie den Computer zurücksetzen. Beispielsweise, wenn: Sie bestimmte Einstellungen geändert haben.
Bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Energiesparmodus befindet. Der Computer oder das Speichermodul könnte beschädigt werden. Wenn der Netzadapter angeschlossen ist, wechselt der Computer entsprechend den Einstellungen in den Energieoptionen in den Energiesparmodus. (Um die Energieoptionen aufzurufen, klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Systemsteuerung -> System und Sicherheit -> Energieoptionen.
Beim nächsten Einschalten des Computers können Sie sofort an der Stelle fortfahren, wo Sie Ihre Arbeit beim Herunterfahren des Systems unterbrochen haben. Wenn sich der Computer im Energiesparmodus befindet, blinkt die Anzeige „Power“ weiß. Wenn Sie den Computer im Akkubetrieb verwenden, sparen Sie Akkuenergie, indem Sie den Computer im Ruhezustand herunterfahren. Der Energiesparmodus verbraucht bei ausgeschaltetem Computer mehr Energie.
Beim Einschalten des Computers können Sie sofort in der zuletzt verwendeten Arbeitsumgebung fortfahren. Sie sparen Energie, indem das System heruntergefahren wird, wenn während eines bestimmten Zeitraums, dessen Länge mit der Ruhezustandsfunktion des Systems festgelegt wird, keine Eingaben oder Hardwarezugriffe erfolgen. Sie können die LCD-gesteuerte Ausschaltung verwenden. Akivieren des Ruhezustands So wechseln Sie in den Ruhezustand: 1. 2. Klicken Sie auf das Charm Einstellungen.
Schalten Sie den Computer oder die Peripheriegeräte nicht sofort wieder ein. Warten Sie einen Moment, damit die Kondensatoren vollständig entladen werden können.
Kapitel 3 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie im Abschnitt Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
Anzeige „Power“ Die Power-Anzeige leuchtet weiß, wenn der Computer eingeschaltet ist. Wenn Sie den Computer in den Energiesparmodus versetzen, blinkt diese Anzeige weiß. Anzeige „Drahtlose Kommunikation“ Die Anzeige für die Drahtlose Kommunikation leuchtet gelb, wenn die Bluetooth- oder Wireless LAN-Funktionen aktiviert sind. Einige Modelle verfügen über Bluetooth und Wireless LAN-Funktionen.
19-VGleichstromeingang Der Netzadapter wird an diese Buchse angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen. Bitte beachten Sie, dass Sie nur das mit dem Computer beim Kauf mitgeliefert Netzadaptermodell verwenden sollten - die Verwendung eines falschen Netzadapters kann zu Schäden am Computer führen. USB-Anschluss (USB Ein oder zwei USB-Anschlüsse, die dem USB 2.0) 2.0-Standard entsprechen, befinden sich auf der linken Seite des Computers. Der USB-2.
Abbildung 3-3 Rechte Seite des Computers 1 2 3 4 1. Kopfhörerbuchse 2. Mikrofonbuchse 3. USB-Anschluss (USB 3.0) 4. USB-Anschluss (USB 3.0) 5. HDMI-Ausgang* 5 6 7 8 9 6. LAN-Buchse 7. Anschluss für einen externen RGBMonitor* 8. Lüftungsschlitze 9. Schlitz für ein Sicherheitsschloss * Bei einigen Modellen verfügbar. Darstellung kann je nach Modell abweichen. Kopfhörerbuchse An die Mini-Kopfhörerbuchse mit einem Durchmesser von 3,5mm können Sie einen Stereokopfhörer anschließen.
LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen. Unterstützt werden Ethernet-LANs mit 10 Megabit/Sekunde (10BASE-T) oder Fast Ethernet-LANs mit 100 Megabit/Sekunde (100BASE-TX). Einige Modelle sind mit Gigabit Ethernet-LAN-Funktion ausgestattet (1000 Mbit/s, 1000BASE-T). Nähere Informationen finden Sie unter Grundlagen der Bedienung. Schließen Sie nur ein LAN-Kabel an die LAN-Buchse an. Wenn Sie ein anderes Kabel anschließen, kann es zu Schäden oder Fehlfunktionen kommen.
Akku Der wiederaufladbare Lithium-Ionen-Akku versorgt den Computer mit Strom, wenn kein Netzadapter angeschlossen ist. Nähere Informationen zur Verwendung und zum Betrieb des Akkus finden Sie im Abschnitt Akku. Unterseite Die folgenden Abbildungen zeigen die Unterseite des Computers. Sie sollten darauf achten, dass der Bildschirm geschlossen ist, bevor Sie den Computer herumdrehen, um Schäden zu vermeiden. Abbildung 3-5 Unterseite des Computers 2 1 3 4 1. Akkuverriegelung 2. Akkufreigabe 3.
Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Blockieren Sie die Lüftungsschlitze nicht. Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern in die Lüftungsschlitze gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. Entfernen Sie die Staubansammlungen an den Lüftungsschlitzen vorsichtig mit einem weichen Tuch.
Abbildung 3-6 Vorderseite des Computers mit geöffnetem Bildschirm 3 1 4 5 2 9 7 6 10 7 11 13 8 12 14 3 1 4 5 2 9 7 6 10 7 11 13 8 12 14 1. Antennen für drahtlose Kommunikation (nicht abgebildet)* 2. Mikrofon* 3. Webcam-LED* 4. Webcam* 5. Mikrofon* 6. Bildschirm 7. LCD-Scharniere 8. Tastatur 9. Stereolautsprecher 10. Ein/Aus-Taste 11. Touchpad 12. Touchpad-Klicktaste 13. Touchpad-Klicktaste 14. Touchpad Ein/Aus-Anzeige * Bei einigen Modellen verfügbar.
Rechtliche Hinweise (Wireless LAN) Weitere Informationen zum Wireless LAN finden Sie im Abschnitt Rechtliche Hinweise. Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen importieren und aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Audiosystem und Videomodus. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können.
Tastatur Die Tastatur des Computers verfügt über Zeichentasten, Steuertasten, Funktionstasten und spezielle Windows-Tasten, um alle Funktionen einer normal großen Tastatur bereitzustellen. Lesen Sie dazu den Abschnitt Tastatur. Stereolautsprecher Über die Lautsprecher werden der von der verwendeten Software erzeugte Klang sowie die vom System erzeugten akustischen Alarmsignale, zum Beispiel bei niedriger Akkuladung, ausgegeben.
Akku Dieser Computer enthält einen Akku. Versuchen Sie nicht, den Akku selbst herauszunehmen oder zu ersetzen. Wenden Sie sich bei Bedarf an einen autorisierten TOSHIBA Service Provider. Der wiederaufladbare Lithium-Ionen-Akku versorgt den Computer mit Strom, wenn kein Netzadapter angeschlossen ist. Nähere Informationen zur Verwendung und zum Betrieb des Akkus finden Sie im Abschnitt Akku.
RTC-Batterie Das Gerät verfügt über einen internen Akku für die Versorgung der internen Echtzeituhr (Real Time Clock, RTC) und des Kalenders. Video-RAM Der Speicher im Grafikadapter eines Computers, der verwendet wird, um ein im Bitmap-Format angezeigtes Bild zu speichern. Die Größe des verfügbaren Video-RAM richtet sich nach dem Systemspeicher des Computers. Desktop -> Desktop Assist (in der Taskleiste) -> Systemsteuerung -> Darstellung und Personalisierung -> Anzeige -> Bildschirmauflösung anpassen.
Grafikchip für verlängerte Akkubetriebszeit gewechselt wird. Dieser Wechsel erfolgt automatisch und erfordert keinen Neustart des Computers durch den Benutzer. Im Menü „Manage 3D Settings“ (3D-Einstellungen verwalten) des NVIDIABedienfelds können Sie die globalen 3D-Einstellungen ändern und die Einstellungen bestimmter Programme übergehen. Diese Außerkraftsetzungen werden jedes Mal automatisch verwendet, wenn Sie eines dieser Programme öffnen.
Computers durch Optimierung des Bildkontrasts beim internen LCD verringern kann. Diese Funktion kann verwendet werden, wenn der Computer im Akkubetrieb läuft nur das eingebaute LCD verwendet DPST ist werkseitig standardmäßig aktiviert. Bei Bedarf können Sie diese Funktion deaktivieren. DPST wird im „Intel® HD Graphics Control Panel/Intel® Graphics and Media Control Panel“ deaktiviert.
Klicken Sie mit der rechten Maustaste auf den Desktop und wählen Sie AMD VISION Engine Control Center/Catalyst Control Center. In diesem Bedienfeld: 1. 2. Wählen Sie PowerPlay™ unter Power. Aktivieren Sie das Kontrollkästchen Enable PowerPlay™ (PowerPlay™ aktivieren), ebenso wie das Kontrollkästchen Enable Vari-Bright™ (Vari-Bright™ aktivieren).
Computer eingeschaltet Computer ausgeschaltet (kein Betrieb) Kein Netzadapter angeschlossen Verbleibende Ladung des Akkus liegt über dem Schwellenwert • Computer in Betrieb • LED: aus Verbleibende • Computer in Ladung des Betrieb Akkus liegt unter • LED: blinkt gelb dem Schwellenwert Akku ist leer Computer schaltet sich ab Anzeige „DC IN/Akku“ Prüfen Sie die Anzeige DC IN/Akku, um den Ladezustand des Akkus und den Status der Stromversorgung durch den angeschlossenen Netzadapter zu überprüfen.
Weiß Der Computer wird mit Strom versorgt und ist eingeschaltet. Weiß blinkend Der Computer befindet sich im Energiesparmodus und wird ausreichend mit Strom versorgt (Netzadapter oder Akku), um diesen Zustand beizubehalten. Leuchtet nicht Unter allen sonstigen Bedingungen leuchtet die Anzeige nicht.
Kapitel 4 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchscreens Einige Modelle sind mit einem Touchscreen ausgestattet. Sie können Symbole, Schaltflächen, Menüpunkte, die Bildschirmtastatur und andere Elemente auf dem Touchscreen mit dem Finger bedienen.
Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Bildschirmrand nach innen. Wischen vom linken Rand: zeigt die zuletzt geöffneten Apps an. Wischen vom rechten Rand: öffnet oder schließt die Charms (Suchen, Teilen, Start, Geräte, Einstellungen). Wischen vom oberen Rand: öffnet oder schließt die App-Befehlszeile. Details und erweiterte Touchscreengesten für die Interaktion mit Windows 8 sind unter „Hilfe und Support“ beschrieben.
Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Touchpadrand nach innen. Wischen vom linken Rand: zeigt die zuletzt geöffneten Apps an. Wischen vom rechten Rand: öffnet oder schließt die Charms (Suchen, Teilen, Start, Geräte, Einstellungen). Wischen vom oberen Rand: öffnet oder schließt die App-Befehlszeile. Einige der in diesem Abschnitt beschriebenen Touchpadvorgänge werden nur von bestimmten Anwendungen unterstützt.
Abbildung 4-1 Tastaturanzeigen 2 1 1. CAPS LOCK 2. Numerischer Modus CAPS LOCK Diese Anzeige leuchtet grün, wenn die Feststelltaste für die Großbuchstaben betätigt wurde. NUMERISCHER MODUS Wenn die Anzeige „Numerischer Modus“ leuchtet, können Sie mit den Zifferntasten der Tastatur Ziffern eingeben. Funktionstaste Die Funktionstasten (F1~F12) sind die zwölf Tasten oben auf der Tastatur.
Sonderfunktionsmodus F1-F12Standardmodus Funktion F4 FN + F4 Ändert das aktive Anzeigegerät. Für die gleichzeitige Anzeige müssen Sie die Auflösung des eingebauten Bildschirms so einstellen, dass sie der Auflösung des externen Anzeigegeräts entspricht. F5 FN + F5 Aktiviert oder deaktiviert das Touchpad. F6 FN + F6 Führt einen Rücklauf durch die Medien aus. F7 FN + F7 Spielt Medien ab oder unterbricht die Wiedergabe.
Diese Toastbenachrichtigungen sind werkseitig deaktiviert. Sie können sie in der Anwendung TOSHIBA Funktionstaste aktivieren. Dieses Utility rufen Sie auf, indem Sie Folgendes wählen: Desktop -> Desktop Assist (in der Taskleiste) -> Tools & Utilitys -> Funktionstaste. Windows-Tasten Die Tastatur verfügt über zwei Tasten, die unter Windows besondere Funktionen haben: die Windows-Starttaste ruft den Startbildschirm auf, die Anwendungstaste hat die gleiche Funktion wie die sekundäre (rechte) Maustaste.
CD (CD-EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD +RW, DVD-RAM, DVD-R DL (Format1), DVD+R DL. Blu-ray™-Combo-Laufwerk Zusätzlich zu den oben aufgeführten Formaten unterstützt das Blu-ray™Combo-Laufwerk auch BD-ROM und BD DL. Blu-ray™-Brenner Zusätzlich zu den oben aufgeführten Formaten unterstützt der Blu-ray™Brenner auch BD-R, BD-R DL, BD-RE und BD-RE DL.
3. Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 4-3 Disc einlegen 1 1. Laserlinse Wenn die Laufwerklade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Lade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten. Nach dem Einpassen muss die Disc jedoch flach in der Lade liegen. Berühren Sie nicht die Laserlinse und den umgebenden Bereich; sie könnte dadurch falsch ausgerichtet werden.
Sie außerdem, bis sich die Disc nicht mehr dreht, bevor Sie sie herausnehmen. 1. Drücken Sie auf die Entnahmetaste, um die Lade etwas zu öffnen. Ziehen Sie die Lade dann vorsichtig heraus, bis sie vollständig geöffnet ist. Wenn sich die Lade etwas öffnet, warten Sie einen Augenblick, um sicherzugehen, dass sich die Disc nicht mehr dreht, bevor Sie die Lade vollständig öffnen. 2. 3. Die Disc ragt leicht über die Seiten der Lade hinaus, sodass Sie sie leicht greifen können.
CD-RWs, darunter Multispeed-CD-RWs, Highspeed-CD-RWs und Ultraspeed-CD-RWs, können mehrmals beschrieben werden. DVDs DVD-R, DVD+R, DVD-R DL und DVD+R DL-Discs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. DVD-RW-, DVD+RW- und DVD-RAM-Discs lassen sich mehrmals beschreiben. Blu-ray™-Discs BD-R, BD-R DL, BD-R TL und BD-R QL-Discs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden.
Haftungsausschluss TOSHIBA ist für die folgenden Schäden nicht haftbar: Schäden an der , die beim Beschreiben bzw. Wiederbeschreiben mit diesem Produkt auftreten. Jegliche Veränderungen bzw. Verluste des aufgezeichneten Inhalts der , die beim Beschreiben bzw. Wiederbeschreiben mit diesem Produkt auftreten sowie daraus resultierende wirtschaftliche Verluste oder Unterbrechungen des Geschäftsbetriebs. Schäden, die durch die Verwendung von Geräten oder Software von Drittherstellern verursacht werden.
DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8- und 16facher Geschwindigkeit) TAIYO YUDEN Co., Ltd. (für 8-fach- und 16-fach-Medien) DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8-facher Geschwindigkeit) DVD-RW: DVD-Spezifikationen für wiederbeschreibbare Datenträger für Version 1.1 oder 1.2 Victor Company of Japan, Ltd. (JVC) (für Medien mit 2-, 4- und 6-facher Geschwindigkeit) MITSUBISHI KAGAKU MEDIA CO., LTD.
Einige Arten und Formate von DVD-R DL- und DVD+R DL-Discs können möglicherweise nicht gelesen werden. Discs, die als DVD-R DL format4 (Layer Jump Recording) erstellt wurden, können nicht gelesen werden. Während des Beschreibens oder Wiederbeschreibens von Discs Beachten Sie während des Schreibens oder Wiederbeschreibens von Discs die folgenden Punkte: Kopieren Sie die Daten von der Festplatte auf das optische Medium.
TOSHIBA VIDEO PLAYER Beachten Sie die folgenden Einschränkungen bei der Verwendung von TOSHIBA VIDEO PLAYER: Hinweise zur Verwendung Diese Software kann nur mit Windows 8 verwendet werden. Die Software TOSHIBA VIDEO PLAYER zum Abspielen von DVDs und Videodateien ist im Lieferumfang enthalten. Auslassen von Einzelbildern, Springen der Audiospur oder asynchroner Ton und Bild können während der Wiedergabe einiger Videotitel auftreten.
Um Urheberrechte zu schützen, ist die WindowsBildschirmdruckfunktion während der Ausführung von TOSHIBA VIDEO PLAYER deaktiviert. (Die Bildschirmdruckfunktionen sind auch deaktiviert, wenn andere Anwendungen neben TOSHIBA VIDEO PLAYER ausgeführt werden und TOSHIBA VIDEO PLAYER minimiert ist.) Beenden Sie TOSHIBA VIDEO PLAYER , wenn Sie die Bildschirmdruckfunktion verwenden möchten. Führen Sie die Installation/Deinstallation von TOSHIBA VIDEO PLAYER unter einem Benutzerkonto mit Administratorrechten aus.
2. Wenn sich eine DVD-Videodisc im DVD-Laufwerk befindet (bei Modellen mit DVD-Laufwerk), startet TOSHIBA VIDEO PLAYER möglicherweise automatisch. Klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Medien & Unterhaltung -> TOSHIBA VIDEO PLAYER, um TOSHIBA VIDEO PLAYER zu starten. Verwendung von TOSHIBA VIDEO PLAYER Hinweise zur Verwendung von TOSHIBA VIDEO PLAYER. Bildschirmanzeigen und verfügbare Funktionen können je nach Video und Szene variieren.
Schließen Sie den Netzadapter des Computers an, wenn Sie Video abspielen. TOSHIBA Blu-ray Disc Player unterstützt die Kopierschutztechnologie AACS (Advanced Access Control System). Die Erneuerung des in dieses Produkt integrierten AACS-Schlüssels ist für den ununterbrochenen Genuss von Blu-ray Discs erforderlich™. Für diese Erneuerung wird eine Internetverbindung benötigt.
Starten von TOSHIBA Blu-ray Disc Player Gehen Sie wie nachstehend beschrieben vor, um TOSHIBA Blu-ray Disc Player zu starten. Legen Sie eine Blu-ray™ Movie Disc in das optische Laufwerk ein, während das Betriebssystem ausgeführt wird. Wenn sich eine Blu-ray™ Movie Disc im Blu-ray™-Laufwerk befindet (bei Modellen mit Blu-ray™-Laufwerk), startet TOSHIBA Blu-ray Disc Player möglicherweise automatisch.
Wichtige Sicherheitshinweise zur 3D-Funktion Unterlassen oder beenden Sie das Ansehen von 3D-Filmen, wenn Sie sich dabei unwohl fühlen. Sehen Sie sich bitte keine 3D-Filme an, wenn Sie an Krämpfen, lichtempfindlichen Reaktionen oder Herzkrankheiten leiden. Aufgrund von möglichen Beeinträchtigungen der Entwicklung des Sehvermögens sollten Kinder unter sechs Jahren keine 3D-Filme ansehen.
Der TOSHIBA VIDEO PLAYER ist für das Abspielen von DVD-Video, DVD-VR und Videodateien sowie für das Betrachten von selbst aufgenommenen 2D-Videos in 3D gedacht. Für die 3D-Wiedergabe von Videoinhalten, die nicht vom Benutzer selbst erstellt wurden, ist unter Umständen die Genehmigung von Dritten erforderlich, falls der Inhalt urheberrechtlich geschützt ist. Der Schutz geistigen Eigentums ist TOSHIBA sehr wichtig.
Nicht alle Videoinhalte können in 3D abgespielt werden. Für die Wiedergabe von 3D-Videoinhalten werden nur die Videoformate „Side-by-Side“ und „Interleave“ unterstützt. Hinweise zur 3D-Wiedergabe mit TOSHIBA Blu-ray Disc Player Die 3D-Wiedergabefunktion kann 3D-Videoinhalte abspielen sowie Videos in 2D, die Sie selbst aufgenommen oder erstellt haben (DVD oder Videodatei), mithilfe der 2D-zu-3D-Echtzeitkonvertierung in 3D anzeigen.
Der Player ist für die Wiedergabe von DVD-Video, DVD-VR und Videodateien sowie für die Anzeige von 2D-Homevideos und anderen 2D-Inhalten, die Sie erstellt haben, in 3D vorgesehen. Die 3DWiedergabe von Videoinhalten, die nicht vom Benutzer erstellt wurden, kann die direkte oder indirekte Zustimmung von Dritten erfordern, wenn die Inhalte urheberrechtlich geschützt sind, sofern dies nicht durch geltende Gesetze anders geregelt ist. Der Schutz geistigen Eigentums ist TOSHIBA sehr wichtig.
Der 3D-Effekt ist auch vom Betrachter abhängig; er unterscheidet sich von Person zu Person. Unterlassen oder beenden Sie die Wiedergabe und überprüfen Sie die Einstellungen Ihrer Geräte, wenn Sie doppelte Videobilder sehen oder den stereoskopischen 3D-Effekt beim Betrachten von 3D-Bildern nicht wahrnehmen können. Sollten Sie dann immer noch kein korrektes Bild sehen, verzichten Sie bitte auf die 3D-Wiedergabe. Unterlassen oder beenden Sie das Ansehen von 3D-Filmen, wenn Sie sich dabei unwohl fühlen.
Arbeitsspeichers auf der Festplatte gespeichert. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. Echtzeituhr-Akku (RTC-Akku) Der RTC-Akku (RTC = Real Time Clock; Echtzeituhr) versorgt die eingebaute Echtzeituhr und den Kalender mit Energie. Außerdem speichert er die Systemkonfiguration, wenn der Computer ausgeschaltet ist. Ist der RTC-Akku vollständig entladen, gehen diese Systemdaten verloren und die Echtzeituhr und der Kalender arbeiten nicht mehr.
Nehmen Sie den Akku nicht aus dem Computer, während die Wakeup-onLAN-Funktion aktiviert ist; andernfalls gehen Daten verloren. Deaktivieren Sie die Wake-on-LAN-Funktion, bevor Sie den Akku aus dem Computer nehmen. Aufladen des Akkus Wenn die Leistung des Akkus nachlässt, blinkt die Anzeige DC IN/Akku gelb, wodurch angezeigt wird, dass die Akkuenergie nur noch für wenige Minuten ausreicht.
Die Ladezeit bei eingeschaltetem Computer ist von der Umgebungstemperatur, der Computertemperatur und vom Einsatz des Computers abhängig. Wenn Sie z. B. externe Geräte stark nutzen, wird der Akku während des Betriebs möglicherweise kaum aufgeladen. Hinweise zum Aufladen des Akkus Unter folgenden Bedingungen kann sich das Laden des Akkus verzögern: Der Akku ist extrem heiß oder kalt (wenn der Akku zu heiß ist, wird er möglicherweise gar nicht aufgeladen).
Die tatsächliche verbleibende Betriebszeit kann leicht von der berechneten Zeit abweichen. Nach häufigen Ent- und Aufladungen nimmt die Kapazität eines Akkus allmählich ab. Deshalb hat ein alter, häufig benutzter Akku eine kürzere Betriebszeit als ein neuer Akku, auch wenn beide vollständig aufgeladen sind. Maximieren der Akkubetriebszeit Die Leistungsfähigkeit eines Akkus zeigt sich daran, wie lange er nach einem Ladevorgang Energie zur Verfügung stellen kann.
Akkutyp Energiesparmodus Beenden-Modus Akku Ca. 4 Tage Ca. 43 Tage Ca. 5,5 Tage Ca. 60 Tage (48 Wh, 6 Zellen) Akku (66 Wh, 6 Zellen, hohe Kapazität) Verlängern der Akkulebensdauer So maximieren Sie die Lebensdauer der Akkus: Trennen Sie den Computer mindestens einmal im Monat von der Steckdose und lassen Sie ihn im Akkubetrieb laufen, bis der Akku vollständig entladen ist. Führen Sie zuvor die folgenden Schritte aus: 1. Schalten Sie den Computer aus. 2.
Nehmen Sie den Akku nicht aus dem Computer, während der Energiesparmodus aktiviert ist. Die Daten im Arbeitsspeicher könnten andernfalls verloren gehen. Im Ruhezustand gehen die Daten verloren, wenn Sie den Akku entfernen oder den Netzadapter abtrennen, bevor der Speichervorgang abgeschlossen ist. Berühren Sie nicht den Akkufreigabehebel, während Sie den Computer halten. Sie könnten den Akku versehentlich entriegeln und sich durch den herausfallenden Akku verletzen.
Abbildung 4-6 Akku entsichern -2 1. Akkuverriegelung 2. Akkufreigabe 3. Akku Installieren des Akkus So setzen Sie einen Akku ein: Berühren Sie nicht den Akkufreigabehebel, während Sie den Computer halten. Sie könnten den Akku versehentlich entriegeln und sich durch den herausfallenden Akku verletzen. 1. 2. 3. Stecken Sie den Akku soweit wie möglich in den Computer. Vergewissern Sie sich, dass der Akku richtig an seinem Platz sitzt und die Akkuverriegelung sich in der gesicherten Position befindet.
LAN-Kabeltypen Vor dem Anschluss an ein LAN muss der Computer entsprechend konfiguriert werden. Wenn Sie sich mit den Standardeinstellungen des Computers an ein LAN anmelden, kann es bei LAN-Vorgängen zu Fehlern kommen. Fragen Sie Ihren LAN-Administrator nach den korrekten Einstellungen und Verfahren. Wenn Sie ein Gigabit Ethernet-LAN (1000 Mbit/s, 1000BASE-T) benutzen, müssen Sie Kabel der Kategorie CAT5E oder höher verwenden. Kabel der Kategorie CAT3 oder CAT5 können nicht verwendet werden.
2. Stecken Sie ein Ende des Kabels in die LAN-Buchse des Computers. Drücken Sie den Stecker vorsichtig fest, bis die Lasche hörbar einrastet. Abbildung 4-7 Anschließen des LAN-Kabels 2 1 1. LAN-Buchse 3. 2. LAN-Kabel Stecken Sie das andere Ende des Kabels in den LAN-Hub-Anschluss oder Router. Sprechen Sie mit Ihrem LAN-Administrator und Ihrem Hardware- oder Software-Händler, bevor Sie eine Netzwerkverbindung konfigurieren.
Zusätzliche Speichermodule sind elektronische Präzisionsbauteile, die durch statische Elektrizität unbrauchbar werden können. Leiten Sie ggf. vorhandene statische Elektrizität von Ihrem Körper ab, bevor Sie ein zusätzliches Speichermodul anfassen. Dazu genügt es, wenn Sie einen beliebigen metallenen Gegenstand in Ihrer Nähe mit bloßen Händen berühren. Verwenden Sie einen passenden Kreuzschlitzschraubendreher, um die Schrauben herauszudrehen und festzuziehen.
7. Richten Sie die Kerbe am Speichermodul mit der am Sockel aus und setzen Sie das Modul vorsichtig in einem 30-Grad-Winkel in den Sockel, bevor Sie es nach unten drücken, bis die seitlichen Laschen einrasten. Abbildung 4-9 Speichermodul einsetzen 1 2 3 1. Nut 2. Oberer Sockel 3. Unterer Sockel Darstellung kann je nach Modell abweichen. Achten Sie darauf, dass keine Gegenstände aus Metall, wie z. B. Heftoder Büroklammern, in das Innere des Computers gelangen.
8. Setzen Sie die Speichermodul-Abdeckung ein und sichern Sie sie mit der Schraube. Achten Sie darauf, dass die Speichermodul-Abdeckung fest geschlossen ist. Abbildung 4-10 Speichermodulabdeckung einsetzen 2 2 1 1. Speichermodulabdeckung 1 2. Schraube Darstellung kann je nach Modell abweichen. 9. Setzen Sie den Akku wieder ein (siehe Abschnitt Ersetzen des Akkus). 10. Drehen Sie den Computer um. 11. Schalten Sie den Computer ein und überprüfen Sie, ob der zusätzliche Speicher erkannt wird.
8. Fassen Sie das Modul an den Kanten und nehmen Sie es aus dem Computer. Nach längerer Verwendung des Computers werden die Speichermodule und die Schaltkreise neben den Speichermodulen sehr warm. Lassen Sie die Speichermodule auf Zimmertemperatur abkühlen, bevor Sie sie ersetzen. Andernfalls können Sie sich leichte Verbrennungen zuziehen. Berühren Sie die Anschlüsse des Speichermoduls oder des Computers nicht. Kleine Partikel auf den Anschlüssen können den Zugriff auf das Speichermodul beeinträchtigen.
Gegenstände aus Metall, wie z.B. Heft- oder Büroklammern, in das Innere des Computers oder der Tastatur gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt und ein Feuer ausbrechen könnte. Beachten Sie, dass für die Verwendung von miniSD/microSD-Karten ein Adapter erforderlich ist. Bitte beachten Sie, dass nicht alle Speichermedien getestet wurden. Daher kann keine Garantie dafür übernommen werden, dass alle Speichermedien erwartungsgemäß funktionieren.
SD-Speicherkarten haben eine maximale Kapazität von 2 GB. SDHCSpeicherkarten haben eine maximale Kapazität von 32 GB. SDXCSpeicherkarten haben eine maximale Kapazität von 64 GB. Formatierung von Speichermedien Neue Speicherkarten sind entsprechend bestimmten Standards formatiert. Wenn Sie eine Speicherkarte neu formatieren möchten, verwenden Sie ein Gerät, dass diese Speicherkarte unterstützt. Formatieren von Speichermedienkarten Speichermedienkarten werden nach bestimmten Standards formatiert verkauft.
Weitere Informationen zur Verwendung von Speicherkarten finden Sie in der Dokumentation, die Sie mit der Karte erhalten haben. Hinweise zur Schreibschutzfunktion Speichermedienkarten verfügen über eine Schreibschutzfunktion. SD-Karte (SD-Speicherkarte, SDHC-Speicherkarte und SDXCSpeicherkarte) Bringen Sie den Schreibschutzschalter in die gesicherte Position, wenn Sie die Aufzeichnung von Daten verhindern möchten.
Entfernen von Speichermedien Die nachstehenden Anleitungen gelten für alle unterstützten Speichergeräte. So entfernen Sie Speichermedien: 1. 2. 3. Klicken Sie auf die Kachel Desktop und öffnen Sie das Symbol Hardware sicher entfernen und Medien auswerfen in der WindowsTaskleiste. Wählen Sie Speichermedium. Ziehen Sie das Medium vollständig heraus.
Abbildung 4-14 Monitorkabel an den Anschluss für einen externen RGBMonitor anschließen 1 2 1. Anschluss für einen externen RGB- 2. RGB-Kabel Monitor Am Anschluss für einen externen RGB-Monitor befinden sich keine Gewindebuchsen zur Verschraubung des Monitorkabels. Kabel von externen Monitoren, die über Befestigungsschrauben verfügen, können jedoch trotzdem verwendet werden. 2. Schalten Sie den externen Monitor ein.
Abbildung 4-15 Verbindung mit dem HDMI-Ausgang 1 1. HDMI-Ausgang 2 2. HDMI-Kabel Unter den folgenden Bedingungen sollten Sie ein HDMI-Gerät nicht anschließen oder trennen: Das System startet gerade. Das System wird heruntergefahren. Wenn Sie ein Fernsehgerät oder einen externen Monitor an den HDMIAnschluss anschließen, ist das Anzeigeausgabegerät auf „HDMI“ eingestellt. Wenn Sie das HDMI-Kabel getrennt haben, warten Sie mindestens 5 Sekunden, bevor Sie es wieder anschließen.
wenn Daten gelesen oder geschrieben werden wenn Kommunikationsvorgänge laufen Auswahl des HD-Formats So wählen Sie den Anzeigemodus aus: 1. 2. 3. 4. 5. 6. 7. Klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Systemsteuerung. Klicken Sie auf Darstellung und Anpassung. Klicken Sie auf Anzeige. Klicken Sie auf Anzeigeeinstellungen ändern. Klicken Sie auf Erweiterte Einstellungen. Klicken Sie auf Alle Modi auflisten. Wählen Sie einen der Modi unter Alle Modi auflisten.
Sie können aber auch manuell verwalten, wie die externen Anzeigegeräte verwendet werden sollen, und die Anzeigeeinstellungen ändern, indem Sie ) gedrückt halten. P drücken und gleichzeitig die Windows-Taste ( Wenn Sie das externe Anzeigegerät trennen, bevor Sie den Computer ausschalten, denken Sie daran, wieder auf den eingebauten Bildschirm umzuschalten.
Universeller Netzadapter Wenn Sie den Computer häufig an zwei Orten benutzen, zum Beispiel zu Hause und im Büro, haben Sie weniger zu tragen, wenn Sie an beiden Orten einen Netzadapter bereithalten. Akku Als Ersatz oder Austausch kann ein zusätzlicher Akku erworben werden. Nähere Informationen finden Sie im Abschnitt Akku. Soundsystem und Videomodus In diesem Abschnitt werden verschiedene Audiosteuerungsfunktionen beschrieben.
Präzise Platzierung von Audio-Cues für intensiven Surround Sound aus beliebigen PC-Lautsprecherkonfigurationen, Laptop/DesktopLautsprechern oder Kopfhörern Breiter Sweet Spot mit verbessertem Klangbild Ausgabe bei maximaler Lautstärke ohne Übersteuern oder Verzerren Verbesserte Dialogwiedergabe für klare und deutliche Stimmen Bassverbesserung für satte Wiedergabe tiefer Frequenzen Hohe Frequenzdefinition für klare Details Gleichbleibende Lautstärke bei verschiedenen Inhalten Um das Utility aufzurufen, klick
Beim Ausführen bestimmter Anwendungen (zum Beispiel 3DAnwendungen und Filmwiedergabe) kann es zu Störungen, Flimmern oder Bildauslassungen kommen. In diesem Fall ändern Sie die Auflösung des Bildschirms. Verringern Sie sie, bis die Anzeige korrekt erfolgt.
Kapitel 5 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zum Betrieb der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder README.TXT-Dateien (falls zutreffend).
TOSHIBA Display Utility TOSHIBA Display Utility enthält die Utilitys Desktoptextgröße und Bildschirmteiler sowie andere Einstellungen. Mit dem Utility Desktoptextgröße können Sie die Textgröße auf dem Desktop größer oder kleiner einstellen, ganz nach Ihren Vorlieben und der Verwendung. Sie können die Textgröße auf dem Bildschirm und in der Titelleiste von Fenstern ändern, indem Sie die Skalierung einstellen.
TOSHIBA VIDEO PLAYER Diese Software zum Abspielen von DVD-Video ist im Lieferumfang enthalten. Klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Medien & Unterhaltung -> TOSHIBA VIDEO PLAYER, um dieses Utility aufzurufen. Ausführliche Informationen zur Verwendung von TOSHIBA VIDEO PLAYER finden Sie in der Hilfedatei. TOSHIBA eco Utility Dieser Computer ist mit dem „ecoModus“ ausgestattet. In diesem Modus wird die Leistung einiger Geräte leicht verringert, um den Stromverbrauch zu senken.
TOSHIBA Media Player by sMedio TrueLink+ Diese Software ist ein Multimediaplayer, mit dem Sie Video, Musik und Fotos abspielen bzw. anzeigen können. TOSHIBA Media Player kann Inhalte aus einer lokalen Bibliothek, einem Heimnetzwerk oder SkyDrive wiedergeben. Klicken Sie auf das Symbol Media Player im Startbildschirm, um den Player aufzurufen. Weitere Informationen finden Sie im Tutorial und in der Onlinehilfe.
TOSHIBA PC Health Monitor Die Anwendung TOSHIBA PC Health Monitor überwacht proaktiv verschiedene Systemfunktionen, zum Beispiel Energieverbrauch, Akkuzustand und Systemkühlung, und informiert Sie über wichtige Zustände im System. Die Anwendung erkennt die Seriennummern des Systems und einzelnen Komponenten und verfolgt bestimmten Aktivitäten bezüglich ihrer Verwendung.
Automatische FestMit dieser Funktion wird die Stromversorgung plattenabschaltung *1 des Festplattenlaufwerks unterbrochen, wenn über einen festgelegten Zeitraum nicht darauf zugegriffen wurde. Sobald das nächste Mal auf die Festplatte zugegriffen wird, wird die Stromversorgung wieder hergestellt. Diese können Sie in den Energieoptionen festlegen.
Energiesparmodus Wenn Sie Ihre Arbeit unterbrechen müssen, können Sie diese Funktion verwenden, um den Computer auszuschalten, ohne die Software zu beenden. Die Daten werden im Hauptspeicher des Computers aufrechterhalten, sodass Sie beim nächsten Einschalten dort mit Ihrer Arbeit fortfahren können, wo Sie sie unterbrochen haben. Ruhezustand Wenn diese Funktion aktiviert ist, können Sie den Computer ausschalten, ohne die geöffneten Anwendungen schließen zu müssen.
TOSHIBA Kennwort-Utility Das TOSHIBA Kennwort-Utility bietet zwei Stufen der Kennwortsicherheit: das Benutzer- und das Supervisorkennwort. Im TOSHIBA Kennwort-Utility eingerichtete Kennwörter unterscheiden sich vom Windows-Kennwort.
Benutzerzeichenfolge (Textfeld) Hier können Sie Text eingeben, der dem Kennwort zugeordnet wird. Klicken Sie nach der Eingabe auf Übernehmen oder OK. Der Text wird angezeigt, wenn Sie beim Starten des Computers zur Eingabe eines Kennworts aufgefordert werden. Sie können das Festplattenkennwort oder das Master-Festplattenkennwort im BIOS Setup einrichten, ändern oder löschen. So starten Sie das BIOS-Setup. 1. Klicken Sie im Charm Einstellungen auf Ein/Aus und wählen Sie dann Neu starten. 2.
Computer mit einem Kennwort starten Wenn Sie bereits ein Benutzerkennwort eingetragen haben, können Sie den Computer auf folgende Art starten: Geben Sie das Kennwort über die Tastatur ein. Das Kennwort muss nur eingegeben werden, wenn der Computer im Ruhezustand oder im Beenden-Modus (Bootmodus) ausgeschaltet wurde. Im Energiesparmodus und bei einem Neustart ist es nicht erforderlich. Um das Kennwort manuell einzugeben, gehen Sie wie nachstehend beschrieben vor: 1.
Übernehmen Bestätigt Ihre Änderungen, ohne das Fenster „TOSHIBA System Settings“ zu schließen. Einige Optionen erscheinen in Grau und können nicht geändert werden.
Ihr Computer kann den kompatiblen Anschluss auch dann mit USB Bus Power (DC 5 V) versorgen, wenn der Computer ausgeschaltet ist. Der Begriff „ausgeschaltet“ schließt den Energiesparmodus, den Ruhezustand und den vollständig ausgeschalteten Zustand ein. Um die USB-Schlaf- und Ladefunktion einzurichten, klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Tools & Utilitys -> System Settings -> Schlaf-Dienstprogramm.
Büroklammern, Haarklammern und ähnliche Gegenstände aus Metall erhitzen sich, wenn sie mit USB-Anschlüssen in Kontakt kommen. Achten Sie darauf, dass USB-Anschlüsse nicht mit Gegenständen aus Metall in Berührung kommen, zum Beispiel beim Transport des Computers in einer Tasche. Der PC verfügt über mehrere Lademodi, sodass zahlreiche unterschiedliche USB-Geräte für die Schlaf- und Ladefunktion unterstützt werden können. Auto-Modus (Standard) ist für eine Vielzahl von digitalen Audioplayern geeignet.
CDP-Lademodus bei System EIN Diese Funktion aktiviert/deaktiviert CDP (Charging Downstream Port), um die schnelle USB-Aufladung bei eingeschaltetem Computer zu verwenden. Wenn der „CDP-Lademodus bei System EIN“ aktiviert ist, kann der Computer die kompatiblen Anschlüsse über USB mit Strom (DC 5 V, 1,5, A) versorgen. Um „CDP-Lademodus bei System EIN“ einzurichten, klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Tools & Utility -> System Settings -> USB.
Es wird empfohlen, den Netzadapter anzuschließen, wenn TOSHIBA Media Player ausgeführt wird. Energiesparfunktionen können die reibungslose Wiedergabe beeinträchtigen. Wenn TOSHIBA Media Player im Akkubetrieb verwendet wird, legen Sie die Energieoptionen auf „Balance“ (Ausgewogen) fest. Der Bildschirmschoner ist deaktiviert, wenn TOSHIBA Media Player eine Videodatei oder eine Diashow mit Fotos abspielt.
2. 3. 4. Klicken Sie oben links im Bildschirm auf Musik. Wählen Sie ein Interpreten- oder Albumsymbol für die Wiedergabe aus. Klicken Sie auf eine Musikdatei, die Sie abspielen möchten. So spielen Sie eine Fotodatei aus einer lokalen Bibliothek ab: 1. 2. 3. 4. Klicken Sie auf dem Startbildschirm von TOSHIBA Media Player auf My Local Library (Eigene lokale Bibliothek). Klicken Sie oben links im Bildschirm auf Fotos. Wählen Sie ein Ordner- oder Datumssymbol für die Wiedergabe aus.
Informationen sind auch hilfreich bei der Diagnose von Problemen, falls der Computer von Toshiba oder einem autorisierten Service-Partner von Toshiba repariert werden muss. Toshiba kann diese Informationen auch zur Analyse bei der Qualitätssicherung verwenden. Im Rahmen der oben genannten Einschränkungen können die auf der Festplatte gespeicherten Daten an Einrichtungen außerhalb Ihres Landes oder Gebietes (z. B. EU) übermittelt werden.
In diesem Abschnitt werden die folgenden Punkte beschrieben: Erstellen von Wiederherstellungsmedien Wiederherstellen der vorinstallierten Software von selbst erstellten Wiederherstellungsmedien Wiederherstellen der vorinstallierten Software vom RecoveryFestplattenlaufwerk Bestellen von Recovery-Discs bei TOSHIBA Erstellen von Wiederherstellungsmedien In diesem Abschnitt wird beschrieben, wie Sie Wiederherstellungsmedien erstellen können.
Einige der oben genannten Medientypen sind eventuell nicht mit dem optischen Laufwerk, das Sie an den Computer angeschlossen haben, kompatibel. Vergewissern Sie sich, dass das optische Laufwerk den gewählten Medientyp unterstützt, bevor Sie fortfahren. USB-Flash-Speicher wird formatiert und alle Daten im USB-FlashSpeicher gehen verloren, wenn Sie den Vorgang fortsetzen. 2. 3. 4. 5. Schalten Sie den Computer ein. Der Computer lädt das Betriebssystem Windows wie gewohnt vom Festplattenlaufwerk aus.
Achten Sie die darauf, die Standardbootmodusoption im BIOS Setup zu verwenden, bevor Sie die Wiederherstellung ausführen. 1. Klicken Sie im Charm Einstellungen auf Ein/Aus und wählen Sie dann Neu starten. 2. Halten Sie die Taste F2 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Das BIOS-Setup-Utility wird geladen. Wählen Sie im BIOS Setup-Bildschirm Erweitert -> Systemkonfiguration -> Bootmodus -> UEFI Boot (Standard).
Wiederherstellen der vorinstallierten Software vom Recovery-Festplattenlaufwerk Ein Teil des Festplattenspeichers ist als verborgene Wiederherstellungspartition konfiguriert. In dieser Partition sind Dateien gespeichert, mit denen sich die vorinstallierte Software bei Problemen reparieren lässt.
* Bitte beachten Sie, dass dieser Service nicht kostenlos ist. 1. 2. Benutzerhandbuch Besuchen Sie https://backupmedia.toshiba.eu im Internet. Befolgen Sie die Anweisungen auf dem Bildschirm. Sie erhalten Ihre Recovery-Discs innerhalb von zwei Wochen nach Bestellung.
Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Jeder Benutzer sollte sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden.
Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert sind und das alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen.
Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Falls Sie ein Softwarepaket nicht laden können, kann der Datenträger beschädigt oder das Programm fehlerhaft sein. Versuchen Sie, eine andere Kopie der Software zu laden. Wird bei Verwendung eines Softwarepakets eine Fehlermeldung ausgegeben, schlagen Sie in der mitgelieferten Dokumentation nach. Sie enthält normalerweise ein Kapitel über Fehlersuche oder eine Zusammenfassung aller Fehlermeldungen.
1. 2. 3. Drücken Sie gleichzeitig CTRL, ALT und DEL (einmal) und klicken Sie dann auf Task-Manager. Das Fenster des Windows Task-Managers wird angezeigt. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen. Andernfalls fahren Sie mit dem nächsten Schritt fort. Schließen Sie alle noch geöffneten Programme, indem Sie sie nacheinander auswählen und jeweils auf Task beenden klicken.
3. Folgen Sie den Anweisungen auf dem Bildschirm. Hardware- und System-Checkliste Dieser Abschnitt behandelt Probleme der Computerhardware und der angeschlossenen Peripheriegeräte.
Problem Vorgehensweise Netzadapter versorgt Überprüfen Sie die Anschlüsse, um den Computer nicht sicherzustellen, dass das Netzkabel/der mit Strom Netzadapter fest an den Computer und eine stromführende Steckdose angeschlossen ist. Überprüfen Sie den Zustand des Kabels und der Anschlüsse. Ist das Kabel zerschlissen oder anderweitig beschädigt, ersetzen Sie es durch ein neues. Sind die Anschlüsse verschmutzt, reinigen Sie diese mit einem sauberen Baumwolltuch.
RTC (Echtzeituhr) Problem Vorgehensweise Die BIOSEinstellung und Systemdatum/uhrzeit sind verloren gegangen Der RTC-Akku ist entladen. Gehen Sie folgendermaßen vor, um das Datum und die Uhrzeit im BIOS-Setup einzustellen: 1. 2. 3. 4. 5. 6. Klicken Sie im Charm Einstellungen auf Ein/ Aus und wählen Sie dann Neu starten. Halten Sie die Taste F2 gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Das BIOS-Setup-Utility wird geladen.
Problem Vorgehensweise Keine Anzeige Drücken Sie die Funktionstasten, um das aktive Anzeigegerät zu ändern, sodass kein externer Monitor verwendet wird. Abdrücke auf dem Bildschirm Möglicherweise haben die Tastatur oder das Touchpad den Bildschirm berührt, während er geschlossen war. Versuchen Sie, die Abdrücke durch vorsichtiges Abwischen des Bildschirms mit einem sauberen trockenen Tuch zu entfernen. Verwenden Sie, falls dies nicht funktioniert, einen hochwertigen LCD-Bildschirmreiniger.
Problem Vorgehensweise Kein Zugriff auf CD/ DVD/Blu-ray™ DVD im Laufwerk Überprüfen Sie, ob die Laufwerklade sicher geschlossen ist. Schieben Sie sie vorsichtig nach hinten, bis sie einrastet. Öffnen Sie die Lade und prüfen Sie, ob die Disc richtig eingelegt wurde. Sie sollte ganz gerade und mit der beschrifteten Seite nach oben liegen. Ein Fremdkörper in der Lade könnte das Lesen der Disc verhindern. Überprüfen Sie, ob ein Fremdkörper vorhanden ist. Entfernen Sie den Fremdkörper.
Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Überprüfen Sie die Geräteeinstellungen. Klicken Sie auf Desktop -> Desktop Assist (in der Taskleiste) -> Systemsteuerung -> Hardware und Sound -> Maus. Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut.
USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach. Schlaf- und Ladefunktion Weitere Informationen finden Sie im Abschnitt USB-Schlaf- und Ladefunktion.
Problem Vorgehensweise Der Akku entlädt sich schnell, selbst wenn der Computer ausgeschaltet ist. Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Schließen Sie den Netzadapter an den Computer an oder deaktivieren Sie die Schlaf- und Ladefunktion. An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht.
Problem Vorgehensweise Es wird kein Ton ausgegeben. Drücken Sie die Funktionstasten zum Erhöhen oder Verringern der Lautstärke. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Mute-Funktion (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit der Funktionstaste das aktive Anzeigegerät, sodass nicht das interne verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen sich die Probleme nicht beheben, wenden Sie sich an den LAN-Administrator. Wireless LAN Problem Vorgehensweise Zugriff auf das Wireless LAN ist nicht möglich Stellen Sie sicher, dass die drahtlose Kommunikation beim Computer eingeschaltet ist.
Sehen Sie sich die Abschnitte zur Fehlerbehebung in den Dokumentationen zu Ihrer Software und zu den Peripheriegeräten an. Treten Fehler bei der Ausführung von Softwareanwendungen auf, lesen Sie die Abschnitte zur Fehlerbehebung in der Softwaredokumentation. Sie können sich auch an den technischen Support des Softwareherstellers wenden. Wenden Sie sich an den Wiederverkäufer oder Fachhändler, bei dem Sie Ihren Computer bzw. Ihre Anwendungsprogramme erworben haben.
Kapitel 7 Anhang Technische Daten In diesem Abschnitt werden die technischen Daten des Computers zusammengefasst. Maße und Gewicht Bei den unten aufgeführten Abmessungen sind Teile, die über die Grundform des Gehäuses hinausragen, nicht berücksichtigt. Die physischen Abmessungen sind modellabhängig. Größe Ca. 413.0 mm x 268 mm x 31.31/33.70 mm (B x T x H) Ca. 413.0 mm x 268 mm x 30.66/33.05 mm (B x T x H) (überstehende Teile nicht eingeschlossen).
Stromversorgung Netzadapter 100-240 V Wechselstrom 50 oder 60 Hertz Computer 19V DC Pinbelegung beim Anschluss für einen externen RGBMonitor 5 1 10 6 15 11 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Datensig
Netzkabel und Netzstecker Der Stecker des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird. Alle Netzkabel müssen folgenden Spezifikationen entsprechen: Leiterquerschnitt: Minimum 0,75 mm2 Nennstromstärke: Minimum 2,5 Ampere Sicherheitsstandards China: CQC USA und Kanada: UL-gelistet und CSA-zertifiziert Nr.
USA Großbritannien UL-zertifiziert BS-zertifiziert Australien Europa AS-zertifiziert Von der entsprechenden Behörde zertifiziert Kanada China CSA-zertifiziert CCC-zertifiziert Informationen zu drahtlosen Geräten Übergreifende Funktionalität der Drahtlostechnologie Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.
Sie Bluetooth- und Wireless LAN-Geräte gleichzeitig verwenden, kann die Netzwerkleistung möglicherweise beeinträchtigt werden; unter Umständen wird die Netzwerkverbindung sogar getrennt. Schalten Sie in diesem Fall umgehend eines der Geräte ab. Wenn Sie Fragen zur Verwendung der Wireless-LAN- oder BluetoothModule von TOSHIBA haben, besuchen Sie http:// www.pc.support.global.toshiba.com. In Europa können Sie die Website http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm konsultieren.
Verwenden Sie die Wireless LAN- (Wi-Fi) oder Bluetooth-Funktionen nicht in der Nähe von Mikrowellengeräten oder in Gebieten, die Funkstörungen oder magnetischen Feldern ausgesetzt sind. Störungen durch Mikrowellengeräte oder andere Quellen können den Wi-Fi- oder Bluetooth-Betrieb unterbrechen. Schalten Sie alle Drahtlosfunktionen aus, wenn sich eine Person mit einem Herzschrittmacher oder einem anderen medizinischen elektrischen Gerät in der Nähe befindet.
Funkmerkmale Die Funkeigenschaften von Wireless LAN-Modulen können in Abhängigkeit von den folgenden Punkten variieren: Land/Vertriebsgebiet, in dem das Produkt erworben wurde Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
Weltweiter Einsatz Der Bluetooth-Funksender und -empfänger operieren im 2,4-GHzFrequenzband. Dieses Band kann lizenzfrei verwendet werden und ist mit den Funksystemen in den meisten Ländern/Gebieten kompatibel. Funkverbindungen Verbindungen zwischen zwei oder mehr Geräten lassen sich unkompliziert herstellen und werden auch dann aufrechterhalten, wenn sich Hindernisse zwischen den Geräten befinden.
Norwegen: Implementiert Dieser Teilabschnitt gilt nicht für das Gebiet in einem Umkreis von 20 km um das Zentrum von NyÅlesund. Russische Föderation: - Nur für den Betrieb in Gebäuden. Eingeschränkte Verwendung der 5150-5350-MHz-Frequenzen in Europa Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden.
Eingeschränkte Verwendung der 5470-5725-MHz-Frequenzen in Europa Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden. Luxemburg: Implementiert Allgemeine Autorisierung erforderlich für Netzwerk- und Dienstbereitstellung. Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2.
USA – Federal Communications Commission (FCC) Dieses Gerät wurde erfolgreich bezüglich der Erfüllung der Klasse BNormen für digitale Geräte, Abschnitt 15 der FCC-Bestimmungen, getestet. Diese Grenzwerte sollen einen angemessenen Schutz vor störenden Interferenzen in einer Wohnumgebung gewährleisten. Ausführliche Informationen finden Sie im Abschnitt über die FCCBestimmungen. Die abgegebene Strahlung des drahtlosen Geräts liegt weit unter den entsprechenden Grenzwerten der FCC.
Verwendung dieses Geräts in Japan In Japan überschneidet sich die Frequenzbandbreite von 2.400 bis 2.483 MHz für Niedrigenergiekommunikationsgeräte der zweiten Generation (wozu dieses Gerät zählt) mit der von mobilen Objektidentifikationssystemen (Gebäudefunkstationen und bestimmte Niedrigenergiefunkstationen). 1.
(1) (2) (3) 2.4 FH (4) 1. 2. 3. 4. 2.4 : Dieses Gerät verwendet eine Frequenz von 2,4 GHz. FH: Dieses Gerät verwendet FH-SS-Modulation. 1: Der Interferenzbereich dieses Geräts liegt unter 10 m. : Dieses Gerät verwendet eine Frequenzbandbreite von 2.400MHz bis 2.483,5 MHz. Es ist nicht möglich, das Frequenzband von mobilen Objektidentifikationssystemen zu vermeiden. 4. Informationen zur JEITA 5 GHz Wireless LAN unterstützt den Kanal W52/W53/W56.
Es gelten folgende Einschränkungen: Das Gerät darf nicht auseinander gebaut oder verändert werden. Installieren Sie das Drahtlosmodul nicht in ein anderes Gerät. Funkzulassungen für drahtlose Geräte Dieses Gerät ist gemäß den Funkstandards der in der folgenden Tabelle aufgeführten Länder/Gebiete zugelassen. Wenn Sie dieses Gerät in Ländern/Regionen verwenden, die in der folgenden Tabelle nicht aufgeführt sind, wenden Sie sich an den TOSHIBA-Support.
bei Akku- statt Netzbetrieb bei Verwendung bestimmter vom Computer erzeugter MultimediaGrafiken oder -Videoanwendungen bei Verwendung von Standard-Telefonleitungen oder langsamen Netzwerkverbindungen bei Verwendung komplexer Design-Software, zum Beispiel CADProgramme bei gleichzeitiger Verwendung mehrerer Anwendungen oder Funktionalitäten bei Verwendung des Computers in Gebieten mit niedrigem Luftdruck (zum Beispiel über 1000 m über NN) bei Verwendung des Computers unter Temperaturbedingungen außerhalb des
Wenn Ihr Computer mit mehr als 3 GB Speicher konfiguriert ist, wird der Speicher möglicherweise nur als ca. 3 GB angezeigt (je nach Hardwarespezifikation des Computers). Dies ist korrekt, da das Betriebssystem normalerweise den verfügbaren Speicher anstatt des im Computer installierten physischen Speichers (RAM) anzeigt. Verschiedene Systemkomponenten (z. B. die GPU des Grafikadapters und PCI-Geräte wie Wireless LAN) benötigen ihren eigenen Speicher.
Die maximale Helligkeit wird nur im Netzbetrieb erreicht. Die Anzeige wird dunkler, wenn der Computer mit Akkuenergie betrieben wird; und die Helligkeit lässt sich dann nicht weiter erhöhen. Grafikchip (Graphics Processing Unit, GPU) Die Leistung des Grafikchips (GPU) variiert je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen. Die GPU-Leistung ist nur im Netzbetrieb optimal und kann im Akkubetrieb erheblich absinken.
Stichwortverzeichnis A Dokumentationsliste 2-1 Drahtlose Kommunikation 7-5 Akku Echtzeituhr 4-24 Energiesparmodus 5-6 ersetzen 4-28 Kapazität überwachen 4-26 Lebensdauer verlängern 4-28 RTC-Akku 3-12 Typen 4-23 Akku-Anzeige 3-16 Duales Zeigegerät Touchpad 6-10 DVD-Super-Multi-Laufwerk schreiben 4-10 verwenden 4-7 E Energiesparmodus automatisch 5-6 einstellen 2-9 Anzeige „DC IN/Akku“ 3-16 Anzeigemodus 4-46 ASCII-Zeichen 4-6 Externer Monitor Probleme 6-14 Audiosystem Probleme 6-13 F B Bildschirm Anzei
Benutzer 5-8 Starten des Computers mit Kennwort 5-10 Supervisor 5-9 Festplatte 6-8 Hardware- und SystemCheckliste 6-5 interner Bildschirm 6-7 Netzstrom 6-5 Problem analysieren 6-2 Speichermedien 6-9 Stromversorgung 6-5 Tastatur 6-7 Touchpad 6-10 Unterstützung von TOSHIBA 6-16 USB-Gerät 6-11 USB-Maus 6-11 L LAN anschließen 4-31 Kabeltypen 4-31 LCD Scharniere 3-9 Lüftungsschlitze 3-5, 3-7, 3-11 R RecoveryFestplattenlaufwerk 5-21 M Reinigen des Computers 1-15 MultiMediaCard entfernen 4-40 SD/SDHC/SDXC-Ka
einschalten 2-6 Energiesparmodus 2-9 LCD-gesteuerte Ein-/ Ausschaltung 5-6 Ruhezustand 2-11 Z Zeigegerät Touchpad 3-10 T Tastatur Funktionstaste 4-4 Funktionstasten F1...