User's Manual

Table Of Contents
Figure 4-8 Connecting the HDMI cable (laptop mode)
1
2
Figure 4-9 Connecting the HDMI cable (tablet mode)
1
2
1. HDMI Micro port 2. HDMI cable (Type D connector)
Product appearance depends on the model you purchased.
Do not plug/unplug an HDMI device under the following conditions:
The system is starting up.
The system is shutting down.
When you connect a television or external monitor to the HDMI Micro port,
the display output device is set to HDMI.
When you unplug the HDMI cable and replug it, wait at least 5 seconds
before you replug the HDMI cable again.
When you change the display output device, the playback device might not
switch automatically. In this case, to set the playback device to the same
device as the display output device, adjust the playback device manually
by the following steps:
1. Click Control Panel -> Hardware and Sound -> Sound under
Windows System group in the Apps view.
2. In the Playback tab, select the playback device which you want to
switch to.
User's Manual 4-17