User's Manual

If you set up your internal storage again later, do not change, delete, or add
partitions in a manner other than specified in the manual, otherwise you
might find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your internal storage, you might find that it becomes
impossible to set up your computer.
Make sure that the AC adaptor is connected during the restoring
process.
Make sure to dock the computer to TOSHIBA Keyboard Dock before
restoring the operating system.
When you reinstall the Windows operating system, the internal storage will
be reformatted and all data will be lost.
1. In the Settings charm, click Power and then select Restart.
2. Hold down 0 (zero) key, and release this key one second after the
computer is power on.
You can also hold down the Volume up button on the computer until
the Boot menu is loaded, and then select HDD Recovery.
Choose Yes if you want to continue.
3. Select Troubleshoot.
4. Select Reset your PC.
5. Follow the on-screen instructions to finish the recovery.
You can also perform the restoration through PC settings in the operating
system:
1. Click the Settings charm, and click Change PC settings.
2. Click Update and recovery under PC settings, and then click
Recovery.
3. Click Get started under Remove everything and reinstall Windows.
4. Follow the on-screen instructions to finish the recovery.
Enabling System Protection for System Restore
Depending upon your system, the Windows
®
System Protection feature,
that automatically creates restore points, might be disabled to conserve
space on your system. To enable this feature, do the following:
1. Tap Control Panel -> System and Security -> System -> System
protection under Windows System group in the Apps view.
2. In the System Protection tab, tap Configure, and then tap Turn on
system protection to enable the function.
After the System Protection feature is enabled, you can undo changes by
reverting your tablet to a previous state by creating a restore point.
User's Manual
5-7