Operating Instructions

Note that some of the disc media might not be compatible with the
optical disc drive connected to your computer. You should therefore
verify that the optical disc drive supports the blank media you have
chosen before proceeding.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.
2. Turn on your computer and allow it to load the Windows operating
system as normal.
3. Insert the first blank disc into the external optical disc drive tray, or
insert the USB Flash Memory into one available USB port.
4. For models with Recovery Media Creator pre-installed:
Click Recovery Media Creator under TOSHIBA group in the Apps
view.
For models without Recovery Media Creator pre-installed:
Click Control Panel -> System and Security -> Action Center ->
Recovery -> Create a recovery drive under Windows System in the
Apps view.
5. Follow the on-screen instructions to finish creating the Recovery
Media.
Restoring the pre-installed software from your created
Recovery Media
If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:
Make sure that the AC adaptor is connected during the restoring process.
When you reinstall the Windows operating system, the internal storage
will be reformatted and all data will be lost.
User's Manual 5-12