TOSHIBA L10 Series User's Manual
TOSHIBA L10 Series Copyright © 2004 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA L10 Series Portable Personal Computer User's Manual First edition December 2004 Ownership and copyright of music, video, computer programs, databases, etc. are protected by the copyright laws.
TOSHIBA L10 Series Trademarks Intel, Intel SpeedStep, Pentium and Celeron are trademarks or registered trademarks of Intel Corporation. Windows® and Microsoft are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak. TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are incorporated under license from SRS Labs, Inc.
TOSHIBA L10 Series Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
TOSHIBA L10 Series Panasonic DVD Super Multi UJ-830 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA L10 Series TOSHIBA SAMSUNG STORAGE TECHNOLOGY DVD-ROM & CD-R/RW TS-L462A ■ The DVD-ROM & CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA L10 Series Panasonic DVD-ROM & CD-R/RW UJ-DA760 ■ The DVD-ROM & CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
TOSHIBA L10 Series International precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure.
TOSHIBA L10 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TOSHIBA L10 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual. Please also refer to the Safety Instruction Manual. Stress injury Carefully read the Safety Instruction Manual.
General Precautions PC Card overheating Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time. Mobile phones Use of mobile phones can interfere with the audio system. Computer operation is not impaired but is recommended that a distance of 30cm be maintained between the computer and a mobile phone in use.
General Precautions CE compliance This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented.
General Precautions Network connection (Class A warning) If this product has networking capabilities and will be connected to a network, Class A radiation limits will be observed (in accordance with technical conventions). This means that if the product will be used in a domestic environment, other devices in the near surrounding area may suffer interference.
General Precautions Limitation of Liability For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility. For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.
General Precautions WARNING Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles. Turn OFF the Wireless Communication switch inside a medical facility or near medical electric equipment. Do not bring medical electric equipment close to the product.
TOSHIBA L10 Series Table of Contents Preface Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -xxii Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -xxiii Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -xxiii Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -xxiii Keys . . . . . . . . . . . . . . . . . . .
Table of Contents Fixed optical media drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 Region codes for DVD drives and media . . . . . . . . . . . . . . . . . . . . 2-10 Writable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 DVDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Writing CDs with the DVD-ROM and CD-R/RW drive . . . . . . . . . . . . 4-9 Important message (DVD-ROM and CD-R/RW drive) . . . . . . . . . . . 4-9 Before writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 When writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Disclaimer (CD-R/RW drive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11 Writing CD/DVDs with the DVD Super Multi drive . . . . . . .
Table of Contents Chapter 5 The Keyboard Typewriter keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F1 ... F12 function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soft keys: Fn key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Emulating keys on enhanced keyboard . . . . . . . . . . . . . . . . . . . . . . Hot keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Chapter 7 Optional Devices PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Removing a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Installing a memory module . . . . . . . . . . . . . . . . . .
Table of Contents Appendix A Specifications Appendix B Display Controller and Modes Appendix C Wireless LAN Appendix D AC Power Cord and Connectors Appendix E If your computer is stolen Glossary Index User’s Manual xxi
TOSHIBA L10 Series Preface Congratulations on your purchase of the TOSHIBA L10 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your TOSHIBA L10 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Preface Chapter 4, Operating Basics, includes instructions on using the following devices: TouchPad, optional USB floppy disk drive, Audio/Video controls, Sound System, optical media drives, modem, wireless communication and LAN. It also provides tips on care of the computer, floppy disks and CD/ DVDs. Chapter 5, The Keyboard, describes special keyboard functions including the keypad overlay and hot keys.
Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C. If three keys are used, hold down the first two and at the same time press the third.
TOSHIBA L10 Series Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Introduction Software Windows® XP Home Edition or Professional The following software is preinstalled: ■ Microsoft® Windows® XP Home Edition or Professional ■ Modem driver ■ Display driver for Windows® ■ TOSHIBA Utilities ■ Wireless LAN driver (Can be used only with Wireless LAN models) ■ Sound driver for Windows® ■ DVD Video Player ■ LAN driver ■ Pointing device driver ■ TOSHIBA User's Manual ■ TOSHIBA Console ■ TOSHIBA ConfigFree ■ TOSHIBA Touch and Launch ■ TOSHIBA TouchPad On/Off Utility ■ TOSHIBA PC D
Introduction Features The computer uses TOSHIBA's advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Built-in The computer is equipped with an Intel® processor. Intel® Celeron® M processor, which incorporates a 1 MB level 2 cache memory. Intel® Celeron® M processor 350 (1.3GHz) or higher.
Introduction Disks Hard Disk Drive Available in two sizes. ■ 40.0 billion bytes (37.26 GB) ■ 60.0 billion bytes (55.88 GB) Other hard disk drives may introduced in the future. USB floppy disk drive (Optional) Accommodates either 3 ½" 1.44-megabyte or 720-kilobyte floppy disks. It connects to a USB port. Computers in this series can be configured with a fixed optical media drive. The available optical media drives are described below.
Introduction DVD Super Multi drive Some models are equipped with a full-size DVD Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 10 speed, DVD-R at maximum 8 speed, DVD-RW at maximum 4 speed. DVD+R at maximum 8 speed, and DVD+RW at maximum 4 speed. DVD-RAM at maximum 3 speed.
Introduction Ports External Monitor 15-pin, analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus (USB 2.0) The computer has Universal Serial Bus ports that comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster than the USB 1.1 standard. (The ports also support USB 1.1.) Slots PC Card The PC Card slot accommodates a 5 mm Type II card.
Introduction Communications User’s Manual Modem An internal modem provides capability for data and fax communication. It supports V.90 (V.92). The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line. Both of V.90 and V.92 are supported only in USA, Canada, Australia, UK, France and Germany. Only V.90 is available in other regions.
Introduction Software Operating System Windows® XP Home Edition, or Windows® XP Professional Edition operating system and TOSHIBA Utilities and drivers preinstalled on the hard disk. Refer to the Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities section in this chapter.
Introduction User’s Manual Instant Security The hot key function Fn + F1 blanks the screen and disables the computer, providing data security. Display Automatic Power Off This feature automatically cuts off power to the internal display when there is no keyboard input for a time specified. Power is restored when any key is pressed. To specify the time click start, Control Panel, Performance and Maintenance, Power Options. At Power Schemes tab, you can select the time for Turn off monitor.
Introduction Panel Power On/Off This feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened. To specify the setting, click start, Control Panel, Performance and Maintenance, Power Options and Advanced tab. Low Battery Automatic Hibernation When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation Mode and shuts down.
Introduction User’s Manual DVD Video Player The DVD Video Player is used to play DVD Video. It has an on-screen interface and functions. Click start, point to All Programs, point to InterVideo WinDVD, then click InterVideo WinDVD. TOSHIBA Zooming Utility This utility allows you to enlarge or reduce the icon size on the desktop or the application window. To run TOSHIBA Zooming Utility, click start, select All Programs followed by TOSHIBA followed by Utilities and then click Zooming Utility.
Introduction User’s Manual TOSHIBA TouchPad On/Off Utility Pressing Fn + F9 enables or disables the TouchPad function. When you press these hot keys, the current setting will change and be displayed as an icon. TOSHIBA Touch and Launch TOSHIBA Touch and Launch is a tool that allows you to perform various tasks easily using the TouchPad. TOSHIBA Touch and Launch is useful in the following conditions. ■ To open a file located on the desktop whose icon is obscured by a window.
Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 7 Optional Devices, for details. The following options are available: User’s Manual Memory expansion A 256 or 512 MB memory module (PC2100 / PC2700 DDR) can easily be installed in the computer. (PC2700 works the same as PC2100) Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement.
TOSHIBA L10 Series Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.
The Grand Tour Left side The following figure shows the computer's left side. Cooling Vents External Monitor Port USB Ports Headphone Jack Microphone Jack PC Card Slot The left side of the computer External Monitor Port This 15-pin port lets you connect an external video display. Analog VGA port supports VESA DDC2B compatible functions. Cooling Vents Cooling vents help prevent the CPU from overheating. Do not block the cooling vents.
The Grand Tour Right side The following figure shows the computer's right side. ODD Indicator Emergency Eject Button Eject Button Fixed Optical Media Disc Drive The right side of the computer User’s Manual Fixed Optical Media Disc Drive The computer is configured with a full-size optical media drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") disks without using an adaptor.
The Grand Tour Backside The following figure shows the computer's back panel (It differs depending on the model). DC IN 19V Jack USB Port Video-Out Jack Modem Jack LAN Jack The backside of the computer User’s Manual Universal Serial Bus (USB 2.0) port A Universal Serial Bus port is on the right side. Refer to the Left side section, for details. DC IN 19V Jack The AC adaptor connects to this socket. Use only the model of AC adaptor that comes with the computer.
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Pack Battery Release Latch (2) Battery Release Lock (1) Cooling Vents Memory Module Cover Wireless LAN Cover The underside of the computer User’s Manual Battery Release Lock (1) Slide this lock to prepare the battery pack for removal. Battery Release Latch (2) Slide and hold this latch to release the battery pack for removal.
The Grand Tour Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.
The Grand Tour User’s Manual Display Screen The LCD displays high-contrast text and graphics. Refer to Display Controller and Modes section in Appendix B, Display Controller and Modes. When the computer operates on the AC adaptor the display screen’s image will be somewhat brighter than when it operates on battery power. The lower brightness level is intended to save battery power. TouchPad A TouchPad located in the center of the palm rest is used to control the on-screen pointer.
The Grand Tour System & Keyboard indicators Built-in HDD Caps Lock NumLock Wireless Activity Power Battery System & Keyboard overlay indicators User’s Manual Power The Power indicator glows green when the computer is on. If you select Standby from Shutdown windows, this indicator flashes orange (one second on, two seconds off) while the computer shuts down.
The Grand Tour USB floppy disk drive (optional) An optional 3 ½" floppy disk drive accommodates 1.44-megabyte or 720kilobyte floppy disks. It connects to the USB port. Disk-In-Use Indicator Floppy Disk Slot Eject Button USB floppy disk drive Disk-In-Use Indicator This indicator lights when the floppy disk is being accessed. Floppy Disk Slot Insert a floppy disk in this slot. Eject Button When a floppy disk is fully seated in the drive, the eject button pops out.
The Grand Tour Fixed optical media drives One of the following optical media drives is installed in the computer: DVD-ROM & CD-R/RW or DVD Super Multi drives. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Region codes for DVD drives and media DVD-ROM & CD-R/RW and the DVD Super Multi drives and their associated media are manufactured according to the specifications of six marketing regions.
The Grand Tour DVDs ■ DVD-R discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW discs can be recorded more than once. ■ DVD-RAM discs can be recorded more than once. ■ DVD+R discs can be written only once. The recorded data cannot be erased or changed. ■ DVD+RW discs can be recorded more than once.
The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/ DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
The Grand Tour ■ Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adaptor or other types of AC Adaptors may have a different voltage which could cause damage to your computer, computer failure and/or possible data loss.
TOSHIBA L10 Series Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read the Safety Instruction Manual. This guide, which is included with the computer, explains product liability.
Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Proper ambient conditions should also be maintained for the computer's operation.
Getting Started Placement of the computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. ■ The display should be no higher than eye level to avoid eyestrain. ■ Place the computer so that it is directly in front of you when you work and make sure you have adequate space to easily operate other devices. ■ Allow adequate space behind the computer to let you freely adjust the display.
Getting Started Lighting Proper lighting can improve legibility of the display and reduce eyestrain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted Windows, shades or other screen to eliminate sun glare. ■ Avoid placing the computer in front of bright light that could shine directly in your eyes. ■ If possible, use soft, indirect lighting in your computer work area.
Getting Started Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.
Getting Started Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Getting Started 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the back of the computer. Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Getting Started Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Windows® XP setup. 1. If an optional external floppy disk drive is connected, make sure it is empty. If a floppy disk is in the drive, press the eject button and remove the floppy disk. 2. Open the display. 3. Press and hold the computer's power button for two or three seconds.
Getting Started Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen. 1. If you have entered data, save it to the hard disk or to a floppy disk drive. 2. Make sure all disk (disc) activity has stopped, then remove the CD/ DVDs or floppy disk drive.
Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in Hibernation Mode, the hibernation feature must be enabled in the Hibernate tab in Power Options. Otherwise, the computer will shut down in Standby Mode. If battery power becomes depleted, data saved in Standby Mode will be lost.
Getting Started Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Disk indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.
Getting Started Entering Standby Mode You can enter Standby Mode in one of three ways: 1. Click Start, click Turn Off Computer and click Stand by. 2. Close the display panel. 3. Press the power button. When you turn the power back on, you can continue where you left when you shut down the computer. You can also enable Standby by pressing Fn + F3. Refer to Chapter 5, The Keyboard, for details. ■ When the computer is shut down in Standby Mode, the power indicator flashes orange.
Getting Started Restoring the preinstalled software If preinstalled files are damaged, use the Product Recovery Disc to restore them. Restoring the complete system To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows® operating system, the hard disk will be reformatted and all data will be lost. 1. Load the Product Recovery Disc in the optical media drive and turn off the computer's power. 2.
TOSHIBA L10 Series Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, the optional USB floppy disk drive, optical media drives, audio/ video controls, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Operating Basics For some functions, you can tap the TouchPad instead of pressing a control button. Click: Tap the TouchPad once Double-click: Tap the TouchPad twice Drag and drop: 1. Hold down the left control button and move the cursor to drag the item you want to move. 2. Lift your finger to drop the item where you want it. Scroll: Vertical: Move your finger up or down the right edge of the TouchPad. Horizontal: Move your finger left or right along the bottom edge of the TouchPad.
Operating Basics Disconnecting 3 ½" floppy disk drive When you have finished using the floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped. If you disconnect the floppy disk drive or turn off the power while the computer is accessing the drive you may lose data or damage the floppy disk or the drive. 2. Click the Safely Remove Hardware icon on the Task Bar. 3. Click floppy disk drive. 4.
Operating Basics Loading discs To load a disc, follow the steps below and refer to the figures. 1. a. When the power is on, press the DVD-ROM eject button to open the drawer slightly. Eject Button Pressing the DVD-ROM eject button b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Pulling the drawer open 3. Place the disc, label side up, in the drawer. Inserting a disc When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above. ■ Do not touch the laser lens. Doing so could cause misalignment.
Operating Basics 4. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place. If the CD/DVD is not seated properly when the drawer is closed, the disc might be damaged. Also, the drawer might not open fully when you press the eject button.
Operating Basics Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer. Also, if the disc is spinning when you open the drawer, wait for it to stop before you remove it. 1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.
Operating Basics Audio/Video controls This section describes how to use the audio/video control buttons. Next and Previous buttons Press on the button to select the desired function. Next Press the button to advance to the next track, chapter or data. Previous Press the button to advance to the previous track, chapter or data. If Random is selected in Windows® Media Player, selecting Next or Previous advances to a random selection.
Operating Basics Writing CDs with the DVD-ROM and CD-R/RW drive Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM and CD-R/RW drive lets you read DVD-ROMs and CDs as well as write CD-R/RW. Observe the precautions in this section to ensure the best performance for writing CDs. For information on loading and unloading CDs refer to the Using optical media drive section. CD-R discs can be written to only once. CD-RW discs can be rewritten many times.
Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used. ■ Be sure to connect the AC adaptor when you write or rewrite. ■ Be sure to close all other software programs except the writing software.
Operating Basics Disclaimer (CD-R/RW drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW disc that may be caused by writing or rewriting with this product. ■ Any change or loss of the recorded contents of CD-R/RW disc that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents. ■ Damage that may be caused by using third party equipment or software.
Operating Basics Before writing or rewriting ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYO YUDEN Co., Ltd. MITSUBISHI Chemical Corporation Ricoh Co., Ltd. Hitachi Maxell Ltd. CD-RW: MITSUBISHI Chemical Corporation Ricoh Co., Ltd.
Operating Basics ■ Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in whole or in part. ■ Data deleted (erased) from a CD-RW, DVD-RW, DVD+RW and DVD-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive.
Operating Basics When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ -RW, DVD-R/-RW/-RAM or DVD+R/+RW disc. ■ Do not perform any of the following actions when writing or rewriting: ■ ■ ■ ■ ■ User’s Manual ■ Change users in the Windows® XP operating system. ■ Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. ■ Start a communication application such as a modem.
Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!. ■ DVD-Audio cannot be created using RecordNow!. ■ You cannot use RecordNow!'s "Audio CD for Car or Home CD Player" function to record music to the DVD-R/-RW or DVD+R/+RW disc. ■ Do not use the "Exact Copy" function of RecordNow! to copy DVDVideo and DVD-ROM with copyright protection.
Operating Basics Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a data CD/DVD. 1. Click the Options button ( ) on the RecordNow! Console to open the Options panels. 2. Select the Data in the left-side menu. 3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button.
Operating Basics InterVideo WinDVD Creator Platinum Please refer to the on-line Help for additional InterVideo WinDVD Creator information. When writing the Setup files for the program into a disc formatted by DLA and starting Setup from this disc, an error may occur. In this case, plase copy them to your hard disk and then run Setup. Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use WinDVD Creator.
Operating Basics 2. Before recording the video to DVD ■ When you record to DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD. ■ Do not perform any of the following actions: • Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. • Bump or cause vibration to the computer.
Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1. Store your CD/DVDs in the container they came in to protect them and keep them clean. 2. Do not bend the CD/DVD. 3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD/DVD that contains data. 4.
Operating Basics Sound System This section describes audio controls including sound levels and power management. Volume control The Volume Control utility lets you control the audio volume in Windows® for both playback and recording. ■ To launch Volume Control for playback, click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control. ■ To launch Recording Control, click Options, point to Properties, choose Recording and click OK.
Operating Basics Region selection Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem's settings are correct for the region in which it will be used. To select a region, follow the steps below. 1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Operating Basics Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed. Select the COM port for your modem to use. Dialing Properties Select this item to display the dialing properties.
Operating Basics Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. In the same way, pull the cable’s other connector out of the computer. Wireless LAN The Wireless LAN feature is not available on all models.
Operating Basics Wireless communication indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction Indicator glows Wireless communication switch is on. Wireless LAN is turned on by an application. If you used the Task Bar to disable Wireless LAN, you will need to restart the computer to re-enable it.
Operating Basics Connecting LAN cable To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activity has ended before moving the computer. Check the Disk indicator on the computer. ■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is securely closed. ■ Turn off the power to the computer. ■ Disconnect the AC adaptor and all peripherals before moving the computer.
TOSHIBA L10 Series Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.
The Keyboard F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination with the Fn key, keys marked with icons execute specific functions on the computer. Refer to the section, Soft keys: Fn key combinations, in this chapter.
The Keyboard Hot keys Hot keys let you enable or disable certain features of the computers. Sound mute: Pressing Fn + Esc in a Windows® environment turns sound on or off. When you press these hot keys, the current setting will change and be displayed as an icon. Instant security: Press Fn + F1 to blank the screen to prevent others from accessing your data. To restore the screen and original settings, press any key or press the TouchPad. If a screensaver password is registered, a dialog box will appear.
The Keyboard LCD Display Brightness: Pressing Fn + F6 decreases the display brightness in decrements. When you press these hot keys, the current setting will be displayed for two seconds by an icon. LCD Display Brightness: Pressing Fn + F7 increases the display brightness in increments. When you press these hot keys, the current setting will be displayed for two seconds by a pop-up icon. Display clarity increases with the brightness level.
The Keyboard Display resolution selection: Press Fn + spacebar to change the display resolution. Each time when you press these hot keys, the display resolution changes. TOSHIBA Zooming Utility (reduce): To reduce the icon size on the desktop or the application window, press the 1 key while holding down the Fn key. TOSHIBA Zooming Utility (enlarge): To enlarge the icon size on the desktop or the application window, press the 2 key while holding down the Fn key.
The Keyboard Windows® special keys The keyboard provides two keys that have special functions in Windows® : Windows® logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows® start menu. This key has the same function as the secondary mouse button. Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one.
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2. Type upper-case characters by holding Fn + Shift and pressing a character key. 3. Release Fn to continue using the overlay. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
TOSHIBA L10 Series Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Power and Power-Up Modes Check the Battery indicator to determine the status of the battery pack. The following indicator lights indicate the battery status: Flashing orange The battery charge is low. The AC adaptor must be connected to recharge the battery. Orange Indicates the AC adaptor is connected and charging the battery. Green Indicates the AC adaptor is connected and the battery is fully charged. No light Under any other conditions, the indicator does not light.
Power and Power-Up Modes Battery types The computer has the following batteries: ■ Battery pack (4300mAh) ■ Real Time Clock (RTC) battery ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Standby Mode.
Power and Power-Up Modes Real Time Clock battery The Real Time Clock (RTC) battery provides power for the internal real time clock and calendar. It also maintains the system configuration. If the RTC battery becomes completely discharged, the system loses this data and the real time clock and calendar stop working. The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative.
Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. Safety precautions Mishandling of batteries can cause death, serious injury or property damage.
Power and Power-Up Modes 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a battery pack become wet. A wet battery pack will overheat, ignite or rupture possibly resulting in death or serious injury. Warning 1.
Power and Power-Up Modes 6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Standby and Suspend will not function and data in memory will be lost. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries. 7. Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor.
Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (4300 mAh) About 6 or longer About 3 RTC battery About 24 Doesn't charge The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored in the taskbar and in the Windows® Power Options control panel utility. ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery's remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity.
Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Battery pack (4300 mAh) About 3 days (Standby Mode) About 30 days (Boot mode) RTC battery 30 days Extending battery life To maximize the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.
Power and Power-Up Modes Installing the battery pack To install a battery, follow the steps below. ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch. 1. 2. 3. 4.
Power and Power-Up Modes Power-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation Mode: Data in memory is saved to the hard disk. ■ Standby Mode: Data is maintained in the computer's main memory. Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started.
TOSHIBA L10 Series Chapter 7 Optional Devices Optional devices can expand the computer's capabilities and its versatility.
Optional Devices PC card The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards. CardBus supports the new standard of 32-bit PC Cards. The bus provides superior performance for the greater demands of multimedia data transmission.
Optional Devices Removing a PC Card ■ Before removing a PC Card, make sure that any applications or system services do not use the card. ■ Be sure to disable the PC Card prior to removing it. Otherwise, the system may be fatally damaged. To remove the PC Card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar and disable the PC Card. 2. Press the PC Card eject button to extend it. 3. Press the extended eject button to pop the card out slightly. 4.
Optional Devices Memory expansion You can install additional memory in the computer's memory module socket to increase the amount of RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost. a. The computer is turned on. b. The computer was shut down using the Standby Mode or Hibernation Mode.
Optional Devices Installing a memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes). 4. Loosen the screws securing the memory module cover. 5. Slide your fingernail or a thin object under the cover and lift it off. Memory Module Cover Removing the memory module cover 6.
Optional Devices 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Slot A Slot B Installing the memory module 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Power and PowerUp Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab.
Optional Devices 5. Grasp the module by the sides and pull it out. ■ If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Or you will get burnt if you touch any of them. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Latches Removing the memory module 6.
Optional Devices USB floppy disk drive The 3 ½" external floppy disk drive module can be connected to the USB port. For details on connecting the 3 ½" external floppy disk drive module, refer to Chapter 4, Operating Basics. External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports several video modes. Refer to Appendix B, Display Controller and Modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2.
Optional Devices TV A TV output feature is provided with some models. You can connect a television set to the Video out jack on the computer. Follow the steps below. If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below. ■ TV single 1. Click start and click Control Panel, then Appearance and Themes. 2. Double-click the Display icon to open the Display Properties window. 3. Click the Settings tab and click the Advanced button. 4.
Optional Devices Changing the resolution If you want to change the resolution, follow the steps below. 1. Click start and click Control Panel, then Appearance and Themes. 2. Double-click the Display icon to open the Display Properties window. 3. Select the Settings tab and click Advanced. 4. Select the Adapter tab, then select List all modes. 5. Select a resolution from the menu.
TOSHIBA L10 Series Chapter 8 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines: ■ Stop immediately when you recognize a problem exists.
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. This includes your printer and any other external device you are using. ■ Before you attach an external device, turn the computer off. When you turn the computer back on it recognizes the new device.
Troubleshooting Software Hardware The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation. These documents usually include a problem solving section or a summary of error messages. Next, check any error messages in the operating system documentation.
Troubleshooting Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program.
Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery Indicator indicator. Refer to Chapter 6, Power and Power-Up Modes for more information. Problem Procedure AC adaptor doesn’t power the computer Check the connections. Make sure the cord is firmly connected to the computer and a power outlet. Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it.
Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes.
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys produce numbers Check that the numeric keypad overlay is not selected. Press Fn + F11 and try typing again. Output to screen is garbled Make sure the software you are using is not remapping the keyboard. Remapping involves reassigning the meaning of each key. Refer to your software’s documentation.
Troubleshooting DVD-ROM & CD-R/RW drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a CD/DVD in the drive Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the CD/DVD. Make sure there is no obstruction. Remove any foreign object.
Troubleshooting Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. ■ Do not run or start other software during writing. ■ Do not jar the computer during writing. ■ Do not connect/disconnect external devices or install/remove internal cards during writing.
Troubleshooting Problem Procedure The software or hardware configuration may be Some CD/DVDs run correctly, but others do causing a problem. Make sure the hardware configuration matches your software's not needs.Check the CD/DVD's documentation. Check the type of CD/DVD you are using.
Troubleshooting PC Card Refer also to Chapter 7, Optional Devices. Problem Procedure PC Card error occurs Reseat the PC Card to make sure it is firmly connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation. If problems persist, contact your dealer. Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
Troubleshooting Problem Procedure The response of the TouchPad is too sensitive Adjust the touch sensitivity. 1. Open the Control Panel. 2. Click the Printers icon and then the Other Hardware icon. 3. Click the Mouse icon. 4. Click the Device Setting tab. 5. Click the Setting button. 6. The Properties for Synaptics Touchpad on PS/2 port screen appears. Double-click Sensitivity in the Select an item section on the left side of the screen. 7. PalmCheck and Touch Sensitivity are displayed.
Troubleshooting Problem Procedure The mouse pointer moves too fast or too slow Try changing the speed setting in the mouse control utility. 1. Open the Control Panel, select the Mouse icon, and press Enter. 2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. The mouse pointer moves erratically The mouse might be dirty. Refer to your mouse documentations for instructions on cleaning. If problems persist, contact your dealer. USB Refer also to your USB device’s documentation.
Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Monitor Refer also to Chapter 7, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor’s power switch is on.
Troubleshooting Problem Procedure After making a call you Make sure the tone or pulse selection in your can’t hear a ring communications application is set correctly. You can also use the ATD command. Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval.
Troubleshooting Printer Problem Procedure Printer does not turn on. Check that the printer is connected to an electric outlet. Make sure the outlet is supplying power by plugging in an appliance. Computer/printer do not Make sure the printer is turned on and is online communicate (ready to use). Inspect the cable connecting the printer to the computer for damage. Make sure it is securely connected. Make sure your software is configured to recognize the printer.
TOSHIBA L10 Series Appendix A Specifications This appendix summarizes the computer's technical specifications. Physical Dimensions User’s Manual Weight (typical) 2.72 kilograms, configured with: 15"XGA, 512MB x 1 RAM, 40GB HDD, Super Multi drive, modem, LAN (100M Bit), 8cell battery. Weight will vary with other configurations. Above weights are measured at a specific criteria. They are not guaranteed as the maximum weight of the actual product. Size 332 (w) x 270 (d) x 28.5/36.
Specifications Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% Non-operating -20°C (-4°F) to 65°C (149°F) 10% to 90% Thermal Gradient 20°C per hour maximum Wet-bulb temperature 26°C maximum Conditions Altitude (from sea level) Operating -60 to 3,000 meters Non-operating -60 to 10,000 meters maximum Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 19 VDC 3.
Specifications Communication protocol Data ITU-T-Rec (Former CCITT) Bell Fax: ITU-T-Rec (Former CCITT) User’s Manual V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90 103/212A V.17/V.29/V.27ter/V.21 ch2 Communication Speed Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.
TOSHIBA L10 Series Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular picture elements (pels) on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) support for the internal LCD and external monitors. The following is available: ■ 15.
Display Controller and Modes Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates. Also, if your software supports both graphics and text modes, the screen display may appear to operate faster using a text mode.
Display Controller and Modes Table 1: Video modes (VGA) (continued) Video mode Type Resolution Character matrix (pels) LCD colors CRT colors Scanning frequency Vertical (Hz) D VGA Grph 320 x 200 Pels 8x8 16 of 256K 16 of 256K 70 E VGA Grph 640 x 200 Pels 8x8 16 of 256K 16 of 256K 70 F VGA Grph 640 × 350 Pels 8 x 14 Mono Mono 70 10 VGA Grph 640 × 350 Pels 8 x 14 16 of 256K 16 of 256K 70 11 VGA Grph 640 × 480 Pels 8 x 16 2 of 256K 2 of 256K 60 12 VGA Grph 640 × 480
Display Controller and Modes Table 2: Video modes (852GM) Resolution LCD colors CRT colors Vertical frequency (Hz) 640 x 480 256/256K 256/256K 60 75 85 100 800 x 600 256/256K 256/256K 60 75 85 100 1024 x 768 256/256K 256/256K 60 75 85 100 1280 x 1024 256/256K (Virtual with XGA Panel only) 256/256K 60 75 85 100 1400 x 1050 256/256K (Virtual with XGA Panel only) 256/256K 60 75 85 1600 x 1200 256/256K (Virtual) 256/256K 60 75 85 1920 x 1440 256/256K (Virtual) 256/256K 60 Some S
Display Controller and Modes Table 2: Video modes (852GM) (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 640 x 480 64/64K 64/64K 60 75 85 100 800 x 600 64/64K 64/64K 60 75 85 100 1024 x 768 64/64K 64/64K 60 75 85 100 1280 x 1024 64/64K (Virtual with XGA Panel only) 64/64K 60 75 85 100 1400 x 1050 64/64K (Virtual with XGA Panel only) 64/64K 60 75 85 1600 x 1200 64/64K (Virtual) 64/64K 60 75 85 1920 x 1440 64/64K (Virtual) 64/64K 60 Some SVGA modes are no
Display Controller and Modes Table 2: Video modes (852GM) (continued) Resolution LCD colors CRT colors Vertical frequency (Hz) 640 x 480 16M/16M 16M/16M 60 75 85 100 800 x 600 16M/16M 16M/16M 60 75 85 100 1024 x 768 16M/16M 16M/16M 60 75 85 100 1280 x 1024 16M/16M (Virtual with XGA Panel only) 16M/16M 60 75 85 100 1400 x 1050 16M/16M (Virtual with XGA Panel only) 16M/16M 60 75 85 1600 x 1200 16M/16M (Virtual) 16M/16M 60 75 85 Some SVGA modes are not supported at LCD+CRT simultan
Display Controller and Modes Display Settings 1. You cannot move from the Settings tab of Display Properties to the multi-monitor when you are using the display of the computer and an external CRT display at the same time.
Display Controller and Modes 2. In some cases DVD video playback images may not be displayed when the display of the computer and a CRT display are used at the same. Reduce the resolution, use the display of the computer only, use the CRT display only or set display device in the multi-monitor, then play DVD. ■ Please refer to External monitor in Chapter 7, Optional Devices, or the application guide for the setting of each display device. 3.
TOSHIBA L10 Series Appendix C Wireless LAN Card Specifications Form Factor Mini PCI TypeIII Compatibility ■ IEEE 802.11 Standard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance. Network Operating System ■ Microsoft® Windows® Networking Media Access Protocol Data Rate ■ CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) ■ 54/48/36/24/18/12/9/6 Mb/s (IEEE 802.11g) ■ 11/5.5/2/1 Mb/s (IEEE 802.
Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Wireless LAN Supported Frequency Sub-bands Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions. Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.
Wireless LAN When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
TOSHIBA L10 Series Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.5 amperes Voltage rating: 125 or 250 VAC (depending on country/region’s power standards) Certification agencies U.S.
AC Power Cord and Connectors Europe: Austria: OVE Italy: IMQ Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: SETI Sweden: SEMKO France: UTE Switzerland: SEV Germany: VDE United Kingdom: BSI In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
TOSHIBA L10 Series Appendix E If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number:+49 (0) 941 7807 921 Country stolen: Machine type: (e.g. TOSHIBA L10) Model number: (e.g. PSL10YXT) Serial number: (e.g.
TOSHIBA L10 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
Glossary LED: light emitting diode LSI: large scale integration MS-DOS: Microsoft® Disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus TFT: thin-film transistor UART: universal asynchronous receiver/transmitter USB: Universal Seria
Glossary application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols. async: Short for asynchronous. asynchronous: Lacking regular time relationship.
Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time. The computer has two cache levels. Level one is incorporated into the processor and level two resides in external memory.
Glossary computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information. configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works. You use the HW Setup program to control your system configuration.
Glossary disk storage: Storing data on magnetic disk. Data is arranged on concentric tracks much like a phonograph record. display: A CRT, LCD, or other image producing device used to view computer output. documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions. DOS: Disk Operating System. See operating system.
Glossary floppy disk: A removable disk that stores magnetically encoded data. floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows® used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
Glossary instruction: Statements or commands that specify how to perform a particular task. interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information. 3) The point of contact between user, the computer, and the program, for example, the keyboard or a menu. interrupt request: A signal that gives a component access to the processor. I/O: Input/output.
Glossary M main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen. Also called a screen. microprocessor: A hardware component contained in a single integrated circuit that carries out instructions. Also called the central processing unit (CPU), one of the main parts of the computer.
Glossary operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices. output: The results of a computer operation. Output commonly indicates data. 1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port of internal modem, or 4) stored on some magnetic media.
Glossary R Radio frequency interference (RFI) shield: A metal shield enclosing the printed circuit boards of the printer or computer to prevent radio and TV interference. All computer equipment generates radio frequency signals. The FCC regulates the amount of signals a computing device can allow past its shielding. A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use.
Glossary system disk: A disk that has been formatted with an operating system. For MS-DOS the operating system is contained in two hidden files and the COMMAND.COM file. You can boot a computer using a system disk. Also called an operating system disk. T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data input/output.
TOSHIBA L10 Series Index A D AC adaptor, 1-3 additional, 1-13 connecting, 3-6 ASCII characters, 5-7 Display, 1-5 automatic power off, 1-9 brightness decreases, 5-4 brightness increases, 5-4 controller, 1-5 opening, 3-7 Display controller, B-1 Documentation list, 1-2 DVD Super Multi drive, 1-5 location, 2-3 using, 4-3 writing, 4-11 DVD-ROM & CD-R/RW drive, 1-4 location, 2-3 using, 4-3 B Battery charging, 6-7 extending battery life, 6-10 indicator, 6-1 location, 2-5 Monitoring capacity, 6-9 real time clo
Index Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-3 Fn + F2 (power save mode), 5-3 Fn + F3 (standby), 5-3 Fn + F4 (hibernation), 5-3 Fn + F5 (display selection), 5-3 Fn + F6 (Display Brightness decreases), 5-4 Fn + F7 (Display Brightness increases), 5-4 Fn + F8 (Wireless setting), 5-4 Fn + F9 (Touch Pad), 5-4 Fn Sticky key, 5-5 Function keys, 5-2 G Graphics controller, 1-5 H Hard disk drive, 1-4 automatic power off, 1-9 Hibernation, 1-10, 5-3 HW Setup, 1-10 K Keyboard, 1-5, 5-1 emulating ke
Index 8-8 DVD Super Multi drive, 8-9 Floppy disk drive, 8-10 Hard disk drive, 8-7 Hardware and system checklist, 8-3 Keyboard, 8-7 LAN, 8-15 LCD panel, 8-7 Memory expansion, 8-13 Modem, 8-14 Monitor, 8-14 overheating power down, 8-4 PC card, 8-11 Pointing device, 8-11 Power, 8-4 Real Time Clock, 8-6 Self test, 8-4 Sound system, 8-14 Support from TOSHIBA, 8-16 System start-up, 8-3 USB, 8-13 Wireless LAN, 8-15 Processor, 1-3 Standby, 1-10 setting, 3-11 System automatic, 1-9 Stolen computer, E-1 R Wireless
Index User’s Manual Index-4
