Operation Manual

If you have previously chosen to remove the recovery partition without
creating "Recovery Media", the "Recovery Media" cannot be created.
However, if you have already created a "Recovery Media", you can use it
to restore the recovery partition.
If you have not created "Recovery Media", contact TOSHIBA support for
assistance.
Restoring the pre-installed software from the
Recovery Partition
A portion of the internal storage space is configured as a hidden recovery
partition. This partition stores files which can be used to restore pre-
installed software in the event of a problem.
If you set up your internal storage again later, do not change, delete, or add
partitions in a manner other than specified in the manual, otherwise you
might find that space for the required software is not available.
In addition, if you use a third-party partitioning program to reconfigure the
partitions on your internal storage, you might find that it becomes
impossible to set up your computer.
Make sure that the AC adaptor is connected during the restoring process.
When you reinstall the Windows operating system, the internal storage will
be reformatted and all data will be lost.
1.
Click the power icon ( ) on the Start screen and then select
Restart.
2. Hold down 0 (zero) key and then release this key one second after the
computer is power on. Choose Yes if you want to continue.
3. Select Troubleshoot.
4. Select Reset your PC.
5. Follow the on-screen instructions to finish the recovery.
You can also perform the restoration through PC settings in the operating
system:
1. Click the Settings charm and click Change PC settings.
2. Click Update and recovery under PC settings and then click
Recovery.
3. Click Get started under Remove everything and reinstall Windows.
4. Follow the on-screen instructions to finish the recovery.
User's Manual
5-14