Gebruikershandleiding C70/C70t/C70D/C75/C75t/ C75D/L70/L70t/L70D/L70Dt/ S70/S70t/S70D/S70Dt
Inhoudsopgave Hoofdstuk 1 TOSHIBA: wet- en regelgeving en veiligheid Copyright, afwijzing van aansprakelijkheid en handelsmerken ....... 1-1 Voorschriften ......................................................................................... 1-2 Verklaring met betrekking tot videostandaarden ............................... 1-7 Licentiekwesties met de OpenSSL Toolkit ......................................... 1-8 ENERGY STAR®-programma .............................................................
Geheugenmedia .................................................................................. 4-35 Extern beeldscherm ............................................................................ 4-39 Beveiligingsslot ................................................................................... 4-42 Optionele TOSHIBA-accessoires ....................................................... 4-43 Geluidssysteem en videomodus .......................................................
Hoofdstuk 1 TOSHIBA: wet- en regelgeving en veiligheid In dit hoofdstuk vindt u informatie over wet- en regelgeving en veiligheid met betrekking tot TOSHIBA-computers. Copyright, afwijzing van aansprakelijkheid en handelsmerken Copyright ©2013 by TOSHIBA Corporation. Alle rechten voorbehouden. Krachtens de auteurswetten mag deze handleiding op geen enkele wijze worden verveelvoudigd zonder voorafgaande schriftelijke toestemming van TOSHIBA.
Handelsmerken Intel, Intel SpeedStep, Intel Core en Centrino zijn handelsmerken of gedeponeerde handelsmerken van Intel Corporation. AMD, het AMD-logo met de pijl, PowerPlay, Vari-Bright en combinaties daarvan zijn handelsmerken van Advanced Micro Devices, Inc. Windows, Microsoft en het Windows-logo zijn gedeponeerde handelsmerken van Microsoft Corporation. Het Bluetooth®-woordmerk en de Bluetooth-logo's zijn gedeponeerde handelsmerken in eigendom van Bluetooth SIG, Inc.
radiocommunicatie. Zelfs als alle instructies zijn opgevolgd, kan echter storing optreden. Als deze apparatuur schadelijke storing voor radio- of televisieontvangst oplevert (wat kan worden vastgesteld door de apparatuur uit en weer aan te zetten), verdient het aanbeveling een of meer van de volgende maatregelen te treffen om de storing te verhelpen: Wijzig de richting of positie van de ontvangstantenne. Vergroot de afstand tussen de apparatuur en de radio/tv.
EU-verklaring van overeenstemming Dit product draagt het CE-keurmerk in overeenstemming met de relevante Europese richtlijnen. De verantwoording voor de toewijzing van CE-keurmerken ligt bij TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Duitsland. De volledige en officiële EU-verklaring van overeenstemming is te vinden op de TOSHIBA-website http://epps.toshiba-teg.com.
Mogelijke gevolgen van het gebruik van dit product in niet-geoorloofde werkomgevingen zijn onder andere: storing van de werking van andere apparaten of machines in de nabijheid; storing van de werking van dit product, mogelijk resulterend in gegevensverlies, als gevolg van storingen die worden gegenereerd door andere apparaten of machines in de nabijheid.
De volgende informatie is alleen van toepassing voor lidstaten van de EU: Afvalverwerking van producten Het symbool van een doorgekruiste vuilnisbak geeft aan dat producten afzonderlijk moeten worden ingezameld en gescheiden van huishoudelijk afval moeten worden verwerkt. Interne batterijen en accu's kunnen met het product worden weggegooid. Ze worden gescheiden door het recyclingcentrum. De zwarte balk geeft aan dat het product op de markt is gebracht na 13 augustus 2005.
Afhankelijk van in welk land of welke regio u dit product hebt aangeschaft, zijn deze symbolen mogelijk niet aanwezig. REACH - Verklaring van overeenstemming De nieuwe verordening van de Europese Unie (EU) met betrekking tot chemische stoffen, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals ofwel registratie, beoordeling, autorisatie en beperkingen van chemische stoffen), is vanaf 1 juni 2007 van kracht.
MET BETREKKING TOT PROMOTIONEEL, INTERN EN COMMERCIEEL GEBRUIK KAN WORDEN VERKREGEN BIJ MPEG LA, L.L.C. ZIE HTTP://WWW.MPEGLA.COM. Licentiekwesties met de OpenSSL Toolkit LICENTIEKWESTIES ============== De OpenSSL Toolkit valt onder twee licenties, dat wil zeggen dat zowel de voorwaarden van de OpenSSL-licentie als de oorspronkelijke SSLeaylicentie van toepassing zijn op de toolkit. Zie hieronder voor de daadwerkelijke teksten van de licenties.
6. Bij herdistributie in welke vorm dan ook moet de volgende kennisgeving worden vermeld: 'Dit product bevat software die is ontwikkeld door het OpenSSL Project voor gebruik in de OpenSSL Toolkit (http://www.openssl.org/)' DEZE SOFTWARE WORDT DOOR HET OpenSSL PROJECT AANGEBODEN 'ALS ZODANIG' EN ALLE EXPLICIETE OF IMPLICIETE GARANTIES, MET INBEGRIP VAN MAAR NIET BEPERKT TOT IMPLICIETE GARANTIES VAN VERKOOPBAARHEID EN GESCHIKTHEID VOOR EEN BEPAALD DOEL, WORDEN AFGEWEZEN.
Als dit pakket wordt gebruikt in een product, moet Eric Young worden vermeld als schrijver van de gebruikte onderdelen uit de bibliotheek. Dit kan gebeuren in de vorm van een tekstbericht wanneer het programma wordt opgestart of in de documentatie (online of in tekst) die bij het pakket wordt geleverd. Herdistributie en gebruik van de broncode of in binaire vorm, met of zonder wijziging, is toegestaan mits aan de volgende voorwaarden wordt voldaan: 1. 2. 3.
zeggen dat deze code niet zo maar mag worden gekopieerd om onder een andere distributiecode te plakken, met inbegrip van de openbare GNUlicentie.] */ ENERGY STAR®-programma Uw computer voldoet mogelijk aan de ENERGY STAR®richtlijnen. Als het model dat u hebt gekocht, hieraan voldoet, is de computer voorzien van het ENERGY STAR®-logo en is de volgende informatie van toepassing. TOSHIBA neemt deel aan het ENERGY STARprogramma van de Environmental Protection Agency (EPA).
Deze computer is uitgerust met een oplaadbare accu. Na herhaaldelijk gebruik zal de accu uiteindelijk niet meer kunnen worden opgeladen en moet deze worden vervangen. Volgens de geldende wetten en voorschriften is het mogelijk niet toegestaan om oude accu's weg te gooien met het huisvuil. Denk om het milieu. Raadpleeg de lokale overheden voor meer details met betrekking tot de recycling van oude accu's of het op de juiste wijze weggooien hiervan.
Voorzorgsmaatregelen LET OP: Dit apparaat bevat een lasersysteem, dat is geclassificeerd als een KLASSE 1LASERPRODUCT. Om te zorgen dat u dit product correct gebruikt, dient u de gebruiksaanwijzingen zorgvuldig te lezen en ter referentie bij de hand te houden. Wend u in geval van problemen met dit model tot het dichtstbijzijnde Authorized Toshiba Service Center. Probeer de kast niet te openen. Doet u dit wel, dan loopt u het risico van directe blootstelling aan de laserstraal.
Een gebruiksvriendelijke omgeving inrichten Plaats de computer op een egaal oppervlak dat groot genoeg is voor de computer en eventuele andere apparaten die u nodig hebt, zoals een printer. Laat voldoende ruimte vrij rondom de computer en andere apparatuur voor een adequate ventilatie. De apparaten kunnen anders oververhit raken. Houd uw computer in optimale werkconditie door de werkplek niet bloot te stellen aan: Stof, vocht en direct zonlicht.
De computer schoonmaken Om een lange levensduur en storingsvrij gebruik te waarborgen dient u de computer stofvrij te houden en voorzichtig te zijn met vloeistoffen in de buurt van de computer. Mors geen vloeistoffen in de computer. Als de computer vochtig wordt, zet u deze direct uit en laat u de computer helemaal droog worden. In deze omstandigheden moet u de computer laten nakijken door een erkende onderhoudsdienst om de schade vast te stellen.
Mobiele telefoons Let erop dat het gebruik van mobiele telefoons kan leiden tot storingen in het audiosysteem. Hoewel de werking van de computer hierdoor niet wordt beïnvloed, verdient het aanbeveling om tijdens telefoongesprekken een afstand van minimaal 30 cm in acht te nemen tussen de computer en de mobiele telefoon.
Hoofdstuk 2 Aan de slag Dit hoofdstuk bevat een controlelijst voor de apparatuur en alle basisgegevens om met uw computer aan de slag te gaan. Sommige voorzieningen die in deze handleiding worden toegelicht, functioneren wellicht niet correct als u een besturingssysteem gebruikt dat niet vooraf door TOSHIBA is geïnstalleerd. Controlelijst van apparatuur Pak de computer voorzichtig uit en bewaar de doos en het verpakkingsmateriaal voor toekomstig gebruik.
Klikken met de rechtermuisknop Klik eenmaal op de rechter touchpadbesturingsknop. Klik eenmaal met de rechtermuisknop. Tik op het aanraakscherm en laat uw vinger staan (alleen voor modellen met een aanraakscherm). Dubbelklikken Tik tweemaal op het aanraakscherm of klik tweemaal op de linker touchpadbesturingsknop. Klik tweemaal met de linkermuisknop. Tik tweemaal op het aanraakscherm (alleen voor modellen met een aanraakscherm).
Gebruik een programma voor viruscontrole en zorg ervoor dat dit regelmatig wordt bijgewerkt. Formatteer opslagmedia nooit zonder eerst de inhoud ervan te controleren. Tijdens het formatteren gaan alle opgeslagen gegevens verloren. Het is verstandig om af en toe een back-up op externe media te maken van de interne vaste schijf of van een ander primair opslagapparaat. Algemene opslagmedia zijn niet duurzaam of stabiel op de lange termijn en onder bepaalde omstandigheden kan dit resulteren in gegevensverlies.
Het meegeleverde netsnoer voldoet aan de veiligheidsregels en voorschriften in de regio waarin de computer wordt verkocht en mag niet buiten deze regio worden gebruikt. Voor gebruik in andere regio's dient u een netsnoer aan te schaffen dat voldoet aan de veiligheidsregels en -voorschriften in die regio. Gebruik geen verloopstekker van 3-pins naar 2-pins. Wanneer u de netadapter op de computer aansluit, dient u de stappen exact uit te voeren in de volgorde die wordt beschreven in deze handleiding.
2. Steek de gelijkstroomuitgangsstekker van de netadapter in de gelijkstroomingang (DC IN 19V) op de computer. Afbeelding 2-3 De gelijkstroomuitgangsstekker op de computer aansluiten 1 2 1. Gelijkstroomingang (19 V) 3. 2. Gelijkstroomuitgangsstekker Steek het netsnoer in een stopcontact. Het DC IN-/acculampje gaat branden. Het beeldscherm openen Het scherm kan in een aantal standen worden geopend voor optimaal kijkgemak. Druk met één hand op de polssteun, zodat het hoofdgedeelte niet wordt opgetild.
Til de computer niet op aan het beeldscherm. Klap het beeldscherm niet dicht als er pennen of soortgelijke voorwerpen tussen het beeldscherm en het toetsenbord zijn achtergebleven. Wanneer u het beeldscherm open- of dichtklapt, moet u een hand op de polssteun plaatsen om de computer op zijn plaats te houden en gebruikt u de andere hand om het beeldscherm voorzichtig open of dicht te klappen (gebruik niet te veel kracht bij het open- of dichtklappen van het beeldscherm).
Eerste configuratie Het opstartscherm van Windows 8 wordt als eerste weergegeven wanneer u de computer aanzet. Volg de aanwijzingen in elk scherm om het besturingssysteem te installeren. Lees zorgvuldig de Licentievoorwaarden door wanneer deze worden weergegeven. Kennismaken met Windows Voor meer informatie over nieuwe onderdelen en het gebruik van Windows 8 raadpleegt u Help en ondersteuning van Windows.
Tegels Tegels zijn toegankelijk en kunnen worden gestart via het startscherm. Het startscherm bevat gewoonlijk de tegels Bureaublad en E-mail en tegels voor alle andere toepassingen die naar uw systeem zijn gedownload. Windows Store Hoewel veel toepassingen vooraf op uw computer zijn geïnstalleerd of zijn ingebouwd, kunt u ook veel andere toepassingen downloaden met één klik met de muis. In de Windows Store kunt u zoeken en bladeren naar duizenden apps, gegroepeerd in overzichtelijke categorieën.
De computer opnieuw opstarten In bepaalde omstandigheden moet u de computer opnieuw instellen (ofwel een reset uitvoeren), bijvoorbeeld: Als u bepaalde computerinstellingen hebt gewijzigd. Als u de computer opnieuw moet opstarten, zijn er twee manieren om dit te doen: Klik in de charm Instellingen op Energie en selecteer Opnieuw opstarten.
Als de netadapter is aangesloten, wordt de computer in de slaapstand gezet op basis van de instellingen in Energiebeheer (dat u opent via Bureaublad -> Desktop Assist (op taakbalk) -> Configuratiescherm -> Systeem en beveiliging -> Energiebeheer). Als u de werking van de computer wilt herstellen nadat de slaapstand is geactiveerd, houdt u de aan/uit-knop of een toets op het toetsenbord gedurende korte tijd ingedrukt.
Als u de computer via de accu gebruikt, kunt u de gebruiksduur verlengen door af te sluiten in de sluimerstand, aangezien de slaapstand meer energie gebruikt als de computer uit staat. Beperkingen van de slaapstand In de volgende omstandigheden werkt de slaapstand niet: De computer wordt onmiddellijk na het afsluitproces weer aangezet. Geheugenschakelingen zijn blootgesteld aan statische elektriciteit of elektrische ruis.
Sluimerstand activeren Voer de volgende stappen uit om de sluimerstand in te schakelen: 1. 2. Klik op de charm Instellingen. Klik op Energie en selecteer Sluimerstand. Als u Sluimerstand wilt weergeven in het menu Energie, moet u de volgende stappen uitvoeren: 1. Klik op Bureaublad -> Desktop Assist (op taakbalk) -> Configuratiescherm -> Systeem en beveiliging -> Energiebeheer. 2. Klik op Het gedrag van de aan/uit-knop bepalen of Het gedrag van het sluiten van het deksel bepalen. 3.
Hoofdstuk 3 Rondleiding In dit hoofdstuk worden de verschillende onderdelen van de computer beschreven. Het wordt aanbevolen vertrouwd te raken met elk onderdeel voordat u de computer gebruikt. Wettelijke voetnoot (niet-toepasselijke pictogrammen) Raadpleeg het gedeelte Wettelijke voetnoten voor meer informatie over niet-toepasselijke pictogrammen. Ga voorzichtig om met de computer om krassen of beschadiging van het oppervlak te voorkomen.
Aan/uit-lampje Het aan/uit-lampje brandt wit als de computer aanstaat. Als u de computer echter in de slaapstand zet, knippert dit lampje wit. Lampje voor draadloze communicatie Het lampje voor draadloze communicatie brandt oranje wanneer de functies voor Bluetooth of draadloos LAN zijn ingeschakeld. Alleen sommige modellen zijn voorzien van functies voor Bluetooth en draadloos LAN.
Universal Serial Buspoort (USB 2.0) Twee USB-poorten, die voldoen aan de USB 2.0standaard, bevinden zich in de linkerkant van de computer. De USB 2.0-poort is niet compatibel met USB 3.0-apparaten. Het is niet mogelijk om het gebruik van alle functies van alle USBapparaten die beschikbaar zijn te bevestigen. Sommige functies die zijn gekoppeld aan een specifiek apparaat werken mogelijk niet correct. Zorg ervoor dat er nooit metalen voorwerpen, zoals schroeven, nietjes en paperclips, in de USB-poort komen.
Microfoonaansluiting Op de 3,5-mm mini-microfoonaansluiting kan een miniplug voor niet-stereofonische microfooninvoer worden aangesloten. Het ingebouwde geluidssysteem ondersteunt de interne luidsprekers en microfoon van de computer en biedt aansluitingsmogelijkheden voor een externe microfoon en een hoofdtelefoon. Universal Serial Bus (USB 3.0)-poorten Twee USB-poorten, die voldoen aan de USB 3.0standaard, bevinden zich in de rechterkant van de computer. De USB 3.0-poort is compatibel met de USB 3.
Luchtopeningen De luchtopeningen helpen oververhitting van de processor voorkomen. Sleuf beveiligingsslot Aan deze sleuf kunt u een beveiligingskabel bevestigen waarmee u de computer aan een bureau of ander groot voorwerp kunt verankeren ter bescherming tegen diefstal. Achterkant In de volgende afbeelding ziet u de achterkant van de computer. Afbeelding 3-4 De achterkant van de computer 1 1.
Afbeelding 3-5 Onderkant van de computer 2 1 3 4 1. Accuvergrendeling 2. Ontgrendelingsschuif accuhouder 3. Luchtopeningen 4. Sleuf voor geheugenmodule De vormgeving van het product verschilt per model. Accuvergrendeling Duw de accuvergrendeling opzij, zodat u de accu-eenheid gemakkelijk kunt verwijderen. Ontgrendelingsschuif Zet de accuvergrendeling in de ontgrendelde accuhouder stand, zodat u de accu-eenheid kunt verwijderen.
Voorkant met geopend beeldscherm In deze paragraaf wordt de computer met geopend beeldscherm beschreven. U opent het scherm door dit omhoog te klappen en in een comfortabele kijkhoek te plaatsen. Afbeelding 3-6 De voorkant van de computer met geopend beeldscherm 3 1 4 5 2 9 7 6 10 7 11 13 8 12 14 3 1 4 5 2 9 7 6 10 7 11 13 8 12 14 1. Antennes voor draadloze communicatie (niet zichtbaar)* 2. Microfoon* 3. Webcamlampje* 4. Webcam* 5. Microfoon* 6. Beeldscherm 7.
Antennes voor draad- Sommige computers in deze serie worden loze communicatie geleverd met een draadloos LAN-/Bluetoothantenne. Wettelijke voetnoot (draadloos LAN) Raadpleeg het gedeelte Wettelijke voetnoten voor meer informatie over draadloos LAN. Microfoon Met de ingebouwde microfoon kunt u geluid voor uw toepassing importeren en opnemen. Raadpleeg het gedeelte Geluidssysteem en videomodus voor meer informatie. Webcamlampje Het webcamlampje brandt wanneer de webcam wordt gebruikt.
Beeldschermscharnieren Dankzij de beeldschermscharnieren kunt u het beeldscherm in de gewenste, comfortabele stand zetten. Toetsenbord Het toetsenbord van de computer bevat tekentoetsen, besturingstoetsen, functietoetsen en speciale Windows-toetsen die alle functionaliteit bieden van een volledig toetsenbord. Raadpleeg het gedeelte Het toetsenbord voor meer informatie.
Accu-eenheid Deze computer is voorzien van een accu. U mag deze echter niet zelf proberen te verwijderen of vervangen. Neem zo nodig contact op met een erkende Toshiba-servicedienst. De oplaadbare lithium-ion accu-eenheid voorziet de computer van stroom wanneer de netadapter niet is aangesloten. Raadpleeg het gedeelte Accu voor meer informatie over het gebruik en de werking van de accu-eenheid.
RTC-batterij Het apparaat heeft een interne batterij voor de interne RTC (Real Time Clock) en kalender. Video-RAM Het geheugen in de grafische kaart van een computer, dat wordt gebruikt om het beeld op te slaan dat wordt weergegeven op een bitmapscherm. De beschikbare hoeveelheid video-RAM is afhankelijk van het systeemgeheugen van de computer. Bureaublad -> Desktop Assist (op taakbalk) -> Configuratiescherm -> Vormgeving en persoonlijke instellingen -> Beeldscherm -> Resolutie aanpassen.
GPU van NVIDIA voor uitstekende grafische prestaties en een geïntegreerde grafische chip van Intel voor een langere gebruiksduur van de accu. Dit schakelen gebeurt automatisch en hiervoor hoeft de gebruiker de computer niet opnieuw op te starten. In het menu Manage 3D Settings (3D-instellingen beheren) van het NVIDIA-regelpaneel kunt u de algemene 3D-instellingen wijzigen en uitzonderingen creëren voor bepaalde programma's.
Energiebesparingstechnologie voor beeldschermen van Intel® Modellen met een Intel GPU beschikken mogelijk over de energiebesparingstechnologie voor beeldschermen die het stroomverbruik van de computer kan verminderen door het beeldcontrast op het interne LCD-scherm te optimaliseren. Deze functie kan worden gebruikt als de computer: wordt gebruikt in de accumodus alleen het interne LCD-scherm gebruikt De energiebesparingstechnologie voor beeldschermen is standaard ingeschakeld.
wordt gebruikt in de accumodus alleen het interne LCD-scherm gebruikt U kunt de Vari-Bright-functie inschakelen in het AMD VISION Engine Control Center/Catalyst Control Center. Dit centrum is toegankelijk op de volgende manier: Klik met de rechtermuisknop op het bureaublad en klik op AMD VISION Engine Control Center/Catalyst Control Center. In dit venster: 1. 2. Selecteer PowerPlay™ onder Power (Stroom).
Ingeschakeld Uitgeschakeld (buiten werking) Netadapter De resterende niet accucapaciteit is aangesloten boven het activeringsniveau voor lage acculading • In werking De resterende accucapaciteit is onder het activeringsniveau voor lage acculading • In werking De accu is leeg. De computer wordt uitgezet • Lampje: uit • Lampje: knippert oranje DC IN-/acculampje Controleer het DC IN-/acculampje om de status van de accu-eenheid te bepalen en de voedingsstatus wanneer de netadapter is aangesloten.
Wit Geeft aan dat de computer van stroom wordt voorzien en is ingeschakeld. Knippert wit Geeft aan de computer nog steeds in de slaapstand staat en dat er voldoende stroom is (adapter of accu) om in deze stand te blijven. Lampje brandt niet In alle andere omstandigheden is het lampje uit.
Hoofdstuk 4 Basisbeginselen In dit hoofdstuk worden de grondbeginselen van computergebruik beschreven en wordt toegelicht welke voorzorgsmaatregelen u daarbij dient te treffen. Het touchscreen gebruiken Sommige modellen zijn voorzien van een touchscreen. Met uw vinger kunt u pictogrammen, knoppen, menuopties, het schermtoetsenbord en andere items op het touchscreen aansturen. Tikken Tik eenmaal met uw vinger op het touchscreen om een item, zoals een app, te activeren.
Vegen Beweeg uw vinger snel vanaf een rand van het scherm zonder te pauzeren wanneer u het scherm voor het eerst aanraakt. Vegen vanaf de linkerrand: de laatst geopende apps en dergelijke weergeven. Vegen vanaf de rechterrand: de charms (Zoeken, Delen, Starten, Apparaten, Instellingen) openen of sluiten. Vegen vanaf de bovenrand: de opdrachtbalk van de app openen of sluiten. Voor meer informatie en meer geavanceerde touchscreenbewegingen voor gebruik met Windows 8 raadpleegt u Help en ondersteuning.
Vegen Beweeg uw vinger snel vanaf een rand van het touchpad zonder te pauzeren wanneer u het touchpad voor het eerst aanraakt. Vegen vanaf de linkerrand: de laatst geopende apps weergeven. Vegen vanaf de rechterrand: de charms (Zoeken, Delen, Starten, Apparaten, Instellingen) openen of sluiten. Vegen vanaf de bovenrand: de opdrachtbalk van de app openen of sluiten. Sommige van de hier beschreven touchpadbewerkingen worden alleen ondersteund in bepaalde toepassingen.
Afbeelding 4-1 Toetslampjes 2 1 1. CAPS LOCK-lampje 2. NUM LOCK-lampje CAPS LOCK Dit lampje brandt groen als de hoofdlettervergrendeling is ingeschakeld voor lettertoetsen. NUM LOCK Wanneer het NUM LOCK-lampje brandt, kunt u de cijfertoetsen van het toetsenbord gebruiken om cijfers in te voeren. Functietoets De functietoetsen (F1~F12) zijn de twaalf toetsen bovenaan op het toetsenbord.
Speciale functiemodus Standaard F1F12-modus Functie F4 FN + F4 Wijzigt het actieve beeldscherm. Als u twee beeldschermen tegelijk wilt gebruiken, moet u de resolutie van het interne beeldscherm instellen op dezelfde resolutie als die van het externe scherm. F5 FN + F5 Schakelt het touchpad in of uit. F6 FN + F6 Hiermee spoelt u het medium achteruit. F7 FN + F7 Hiermee speelt u media af of pauzeert u de weergave. F8 FN + F8 Hiermee spoelt u het medium vooruit.
U opent deze toepassing door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Hulpprogramma's -> Functietoets. Speciale Windows-toetsen Het toetsenbord is voorzien van twee toetsen die in Windows een speciale functie hebben: de Windows Start-toets activeert het menu Start, terwijl de toepassingstoets dezelfde functie heeft als de rechtermuisknop. Deze toets activeert het startscherm van Windows. Deze toets heeft dezelfde functie als de secundaire (rechter)muisknop.
Blu-ray™-schrijfstation Naast de bovenstaande indelingen ondersteunt het Blu-ray™-schrijfstation BD-R, BD-R DL, BE-RE en BD-RE DL. Blu-ray™-schrijfstation BDXL™ Naast de bovenstaande indelingen ondersteunt het Blu-ray™-schrijfstation BDXL™ BD-R TL, BD-R QL en BD-RE TL. DVD-R DL- en DVD+R DL-schijven in bepaalde indelingen kunnen onleesbaar zijn. Het optische station gebruiken Het station van volledige grootte ondersteunt snelle uitvoering van programma's op een optische schijf.
3. Leg de schijf met het opschrift omhoog in de schijflade. Afbeelding 4-3 Een schijf plaatsen 1 1. Laserlens Wanneer de schijflade volledig is uitgeschoven, bedekt de rand van de computer de schijflade een stukje. Wanneer u de schijf in de lade plaatst, moet u de schijf daarom schuin houden. Zorg na het plaatsen van de schijf echter dat de schijf plat ligt. Raak nooit de laserlens of de omringende behuizing aan om onjuiste uitlijning te voorkomen.
Wanneer de schijflade een stukje wordt geopend, moet u even wachten totdat de schijf is opgehouden met draaien voordat u de schijflade volledig opentrekt. 2. 3. De schijf steekt iets uit over de zijkanten van de schijflade, zodat u hem kunt pakken. Til de schijf er voorzichtig uit. Duw zachtjes tegen het midden van de schijflade om deze te sluiten. Duw zachtjes tot de lade vastklikt.
DVD-RW-, DVD+RW- en DVD-RAM-schijven kunnen meermaals worden beschreven. Blu-ray™-discs Een BD-R, BD-R DL, BD-R TL of BD-R QL kan slechts eenmaal worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd. Een BD-RE, BD-RE DL of BD-RE TL kan meer dan eenmaal worden beschreven. Schijven beschrijven Met het DVD Super Multi-station of het Blu-ray™-combinatiestation kunt u gegevens schrijven naar CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW of DVD-RAM.
Schade die is veroorzaakt door het gebruik van hardware of software van andere leveranciers. Hedendaagse optische stations zijn onderhevig aan dusdanige technologische beperkingen dat er onverwachte schijf- of herschrijffouten kunnen optreden als gevolg van de schijfkwaliteit of problemen met de gebruikte apparaten. Het is dan ook raadzaam om ten minste twee kopieën te maken van belangrijke gegevens, voor het geval de opgenomen inhoud onverhoopt wordt veranderd of verloren gaat.
DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (voor 4- en 8-speed media) DVD-RAM (alleen DVD Super Multi-station): DVD-specificaties voor DVD-RAM-schijven voor versie 2.0, 2.1 of 2.2 Panasonic Corporation (voor 3x- en 5x-speed media) Hitachi Maxell, Ltd. (voor 3x- en 5x-speed media) BD-R: Panasonic Corporation BD-R DL: Panasonic Corporation BD-RE: Panasonic Corporation BD-RE DL: Panasonic Corporation BD-R TL: TDK.
Vermijd de volgende handelingen: Wisselen tussen gebruikers in het besturingssysteem. Gebruik van de computer voor andere functies zoals het gebruik van een muis of touchpad of het sluiten/openen van het beeldscherm. Een communicatietoepassing starten. Handelingen waardoor de computer wordt blootgesteld aan schokken of trillingen. Het installeren, verwijderen of aansluiten van externe apparaten zoals een geheugenkaart, USB-apparaat, externe monitor of een optisch digitaal apparaat.
Niet-afgesloten DVD's die zijn gemaakt op een gewone DVD-recorder kunnen mogelijk niet worden afgespeeld op de computer. Gebruik DVD-video's met een de regiocode 'gelijk aan de standaardfabrieksinstelling' (indien van toepassing) of 'alles'. Speel geen video af terwijl u met een ander programma een televisieprogramma kijkt of opneemt. Hierdoor kunnen fouten ontstaan in de weergave van de video of de opname van het televisieprogramma.
Beeldschermen en geluid Als het videobeeld niet wordt weergegeven op het externe beeldscherm of de televisie, stopt u TOSHIBA VIDEO PLAYER en wijzigt u de schermresolutie. U wijzigt de schermresolutie door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Configuratiescherm -> Vormgeving en persoonlijke instellingen > Beeldscherm -> Resolutie aanpassen. Video kan echter niet worden uitgevoerd naar sommige externe schermen en televisie vanwege de uitvoer- of weergaveomstandigheden.
Druk op de toets F1 terwijl TOSHIBA VIDEO PLAYER is gestart en klik op de knop Help. TOSHIBA Blu-ray Disc Player Wanneer u TOSHIBA Blu-ray Disc Player gebruikt, dient u rekening te houden met de volgende beperkingen: Opmerkingen betreffende het gebruik Deze software kan alleen worden gebruikt in Windows 8. Tijdens de weergave van inhoud met een hoge bitsnelheid kunnen frames wegvallen, kan het geluid overslaan of kunnen de computerprestaties afnemen. Sluit alle andere toepassingen voordat u een afspeelt.
De interactieve functie van Blu-ray™-discs werkt mogelijk niet, afhankelijk van de inhoud of de netwerksituatie. Blu-ray™-stations en de bijbehorende media worden vervaardigd conform de specificaties van drie verkoopgebieden. Regiocodes kunnen worden ingesteld via TOSHIBA Blu-ray Disc Player. (Klik in het weergavegebied op de knop Setting (Instelling) en klik op het menu Region (Regio)).
De handleiding van TOSHIBA Blu-ray Disc Player openen De functies van en instructies voor TOSHIBA Blu-ray Disc Player worden uitgebreid toegelicht in de handleiding van TOSHIBA Blu-ray Disc Player. U opent de handleiding van TOSHIBA Blu-ray Disc Player als volgt. Druk op de toets F1 wanneer TOSHIBA Blu-ray Disc Player is gestart en klik op de knop Help. 3D-weergave op een extern 3D-apparaat 3D-weergave op een extern 3D-apparaat is alleen mogelijk bij sommige modellen.
Opmerkingen over 3D-weergave voor TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER biedt een 3D-weergavefunctie die 3D-videoinhoud kan afspelen en 2D-homevideo's (DVD of videobestand) kan omzetten in 3D met behulp van real-time 2D-naar-3D-conversie. Het effect van 3D kan alleen worden weergegeven op externe 3Dapparaten die zijn aangesloten op een HDMI-uitgang. Het kan niet worden weergegeven op het interne beeldscherm.
Er kan enige vertraging optreden als u een van de volgende bewerkingen uitvoert terwijl het videoweergavevenster schermvullend wordt weergegeven. Vensters weergeven zoals het menu van de rechtermuisknop, het instellingenvenster, [Titel/hoofdstuk zoeken], [Bestand selecteren] of een foutbericht. Bewerkingen in Windows Bewerkingen in andere toepassingen Zorg dat de netadapter is aangesloten wanneer de 3Dweergavefunctie wordt gebruikt. 3D-weergave kan alleen schermvullend worden uitgevoerd.
De 3D-weergavefunctie van de speler is alleen bedoeld voor persoonlijk gebruik thuis. Houd er rekening mee dat toepasselijke auteurswetten weergave in het openbaar kunnen verbieden wanneer u 3D-weergave van video-inhoud van derden aanbiedt aan onbekende personen of een groot publiek. De functie voor 2D-naar-3D-conversie gebruikt TOSHIBA’s originele algoritme om een 3D-effect toe te passen op uw eigen 2D-video's.
Afhankelijk van de systeemomgeving kan de speler automatisch overschakelen naar 2D als u een van de volgende bewerkingen uitvoert tijdens 3D-weergave. Bovendien kunt u enige vertraging ondervinden wanneer de omschakeling plaatsvindt. - Vensters of pop-upmenu's openen zoals het menu van de rechtermuisknop, het instellingenvenster, [Bestand selecteren] of een foutbericht. - Windows-functies gebruiken. - Andere toepassingen gebruiken.
Deze software kan MPEG2-, MP4- en WTV-bestanden afspelen. Uw eigen 2D-video-inhoud die u hebt opgenomen met een videocamcorder en andere inhoud die u zelf hebt gemaakt kan worden afgespeeld in 2D of in 3D met behulp van real-time 2D-naar-3Dconversie. Voor de weergave van 3D-video-inhoud worden alleen de 3D-video-indelingen Side-by-Side en Interleave ondersteund. Niet alle bestanden kunnen worden afgespeeld.
Zorg dat de accu-eenheid correct in de computer is geïnstalleerd voordat u probeert de eenheid op te laden. Onjuiste installatie kan resulteren in beschadiging van de accu of in rookontwikkeling of brand. Houd de accu buiten het bereik van baby's en kinderen. De accu kan letsel veroorzaken. De lithium-ionaccu kan ontploffen als deze batterij onjuist wordt vervangen, gebruikt, gehanteerd of afgedankt. Houd u bij het afdanken van de accu aan de plaatselijke verordeningen of voorschriften.
een functionerend stopcontact. Het DC IN-/acculampje brandt oranje terwijl de accu wordt opgeladen. Gebruik voor het opladen van de accu-eenheid alleen de computer (aangesloten op het stopcontact) of de optionele accu-oplader van TOSHIBA. Probeer nooit de accu met een andere lader op te laden. Oplaadtijd In de volgende tabel wordt aangegeven hoe lang het ongeveer duurt om een lege accu volledig op te laden.
1. 2. 3. Ontlaad de accu volledig door deze in de ingeschakelde computer te laten tot het systeem zichzelf automatisch uitschakelt. Sluit de netadapter aan op de gelijkstroomingang (19 V) van de computer en op een werkend stopcontact. Laad de accu op totdat het DC IN-/acculampje wit brandt. Herhaal deze stappen twee of drie keer tot de accucapaciteit het normale niveau heeft bereikt.
Of u het scherm sluit wanneer u het toetsenbord niet gebruikt. Het scherm sluiten bespaart energie. De omgevingstemperatuur. De gebruiksduur neemt af bij lage temperaturen. De conditie van accuklemmen. Zorg ervoor dat deze altijd schoon zijn door ze te reinigen met een schone droge doek voordat de accueenheid wordt geïnstalleerd. Of u de functie Slaapstand en laden inschakelt.
5. Laad de accu op totdat het DC IN-/acculampje wit brandt. De accu-eenheid vervangen Vergeet niet dat de accu-eenheid een verbruiksartikel is. De gebruiksduur van de accu neemt geleidelijk af door herhaaldelijk laden en ontladen, en deze zal moeten worden vervangen als de levensduur voorbij is. U kunt daarnaast een lege accu-eenheid ook vervangen door een reserve-accu als u de computer voor een langere tijd niet op het elektriciteitsnet kunt aansluiten.
Afbeelding 4-6 De accu-eenheid vrijgeven - 2 1. Accuvergrendeling 2. Ontgrendelingsschuif accuhouder 3. Accu-eenheid De accu installeren Voer de volgende stappen uit om een accu-eenheid te installeren: Raak de accu-ontgrendelingsschuif niet aan terwijl u de computer vasthoudt omdat de accu-eenheid er dan uit kan vallen doordat de accuhouder per ongeluk wordt ontgrendeld en letsel kan veroorzaken. 1. 2. 3. Schuif de accu zo ver als het gaat in de computer.
Typen LAN-kabels De computer moet correct worden geconfigureerd voordat u verbinding met een LAN maakt. Als u zich bij een LAN aanmeldt terwijl de standaardinstellingen van de computer van kracht zijn, kunnen storingen in het LAN optreden. Vraag de LAN-beheerder naar de juiste configuratieprocedures. Als u Gigabit Ethernet LAN (1000 megabits per seconde, 1000BASE-T) gebruikt, dient u de computer via een CAT5E-kabel of hoger aan te sluiten. U kunt geen CAT3- of CAT5-kabel gebruiken.
3. Koppel het andere uiteinde van de kabel aan een LAN-hubconnector of router. Raadpleeg de netwerkbeheerder en hardware- of softwareleverancier voordat u een netwerkverbinding gebruikt of configureert. Aanvullende geheugenmodule U kunt het geheugen van de computer uitbreiden om de hoeveelheid beschikbaar systeemgeheugen te vergroten. In dit gedeelte wordt beschreven hoe u een optionele geheugenmodule installeert en verwijdert.
1. 2. 3. 4. 5. 6. Klik op Energie in de charm Instellingen en klik vervolgens op Uitschakelen terwijl u de SHIFT-toets ingedrukt houdt. Let erop dat het aan/uit-lampje uit is. Verwijder de netadapter en alle kabels en randapparaten die op de computer zijn aangesloten. Sluit het beeldscherm. Draai de computer ondersteboven en verwijder de accu-eenheid (raadpleeg zo nodig het gedeelte De accu-eenheid vervangen). Draai de schroef los waarmee het afdekplaatje van de geheugenmodules is bevestigd.
7. Breng het uitstekende gedeelte van de geheugenmodule op één lijn met de geheugensleuf en plaats de voorzichtig in de sleuf onder een hoek van ongeveer 30 graden. Duw de module vervolgens omlaag tot deze aan weerszijden vastklikt. Afbeelding 4-9 De geheugenmodule plaatsen 1 2 3 1. Inkeping 2. Bovenste sleuf 3. Onderste sleuf De vormgeving van het product verschilt per model. Let erop dat er nooit metalen voorwerpen, zoals schroeven, nietjes of paperclips in de computer terechtkomen.
8. Plaats het afdekplaatje van de geheugenmodule terug en bevestig het met de schroef. Zorg ervoor dat het afdekplaatje goed vastzit. Afbeelding 4-10 Het afdekplaatje over de geheugenmodule plaatsen 2 2 1 1. Afdekplaatje geheugenmodule 1 2. Schroef De vormgeving van het product verschilt per model. 9. Installeer de accu-eenheid. Raadpleeg zo nodig het gedeelte De accueenheid vervangen. 10. Draai de computer om. 11.
8. Pak de module bij de randen vast en verwijder hem uit de computer. Bij langdurig computergebruik worden de geheugenmodules en de nabijgelegen schakelingen heet. Laat de geheugenmodules in dat geval afkoelen tot kamertemperatuur alvorens ze te hanteren. Als u de modules eerder aanraakt, kunt u zich branden. Raak de connectoren op de geheugenmodule en op de computer niet aan. Vuil op de connectoren kan problemen met de toegang tot het geheugen veroorzaken.
computer beschadigd raakt en er brand ontstaat, met mogelijk ernstig letsel tot gevolg. Voor gebruik van een miniSD/microSD-kaart is een adapter vereist. Houd er rekening mee dat niet alle geheugenmedia zijn getest op een correcte werking. Er kan derhalve niet worden gegarandeerd dat alle geheugenmedia probleemloos functioneren. De sleuf ondersteunt geen Magic Gate-functies.
De maximale capaciteit van SD-geheugenkaarten is 2 GB. De maximale capaciteit van SDHC-geheugenkaarten is 32 GB. De maximale capaciteit van SDXC-geheugenkaarten is 64 GB. Formattering van geheugenmedia Nieuwe mediakaarten worden geformatteerd volgens specifieke normen. Als u een mediakaart opnieuw wilt formatteren, gebruik hiervoor dan een apparaat dat mediakaarten kan gebruiken. Een geheugenkaart formatteren Wanneer u een geheugenkaart koopt, is deze reeds geformatteerd conform specifieke normen.
De schrijfbeveiliging Geheugenkaarten hebben een schrijfbeveiliging. SD-kaart (SD-geheugenkaart, SDHC-geheugenkaart, SDXCgeheugenkaart) Zet de schrijfbeveiligingsschakelaar in de vergrendelde stand als u geen gegevens wilt vastleggen. Geheugenmedia plaatsen De volgende instructies zijn van toepassing op alle soorten ondersteunde media. Voer de volgende stappen uit als u een geheugenmedium wilt plaatsen: 1. 2. 3.
1. 2. 3. Klik op de tegel Bureaublad en open het pictogram Hardware veilig verwijderen en media uitwerpen op de Windows-taakbalk. Selecteer geheugenmedia. Verwijder nu het medium. Als u het geheugenmedium verwijdert of de computer uitschakelt terwijl de computer het geheugenmedium gebruikt, bestaat de kans dat gegevens op het medium verloren gaan of beschadigd raken. Verwijder een geheugenmedium niet terwijl de computer in de slaapstand of de sluimerstand staat.
De poort voor een externe RGB-monitor bevat geen bevestigingsschroeven voor een monitorkabel. Monitorkabels met bevestigingsschroeven kunnen echter wel worden gebruikt. 2. Zet de externe monitor aan. Wanneer u de computer aanzet, wordt de monitor automatisch herkend en wordt vastgesteld of het een kleuren- of monochrome monitor betreft.
In de volgende omstandigheden mag u een HDMI-apparaat niet aansluiten of loskoppelen: Het systeem wordt opgestart. Het systeem wordt afgesloten. Wanneer u een televisie of externe monitor aansluit op de HDMI-poort, moet het beelduitvoerapparaat zijn ingesteld op HDMI. Wanneer u de HDMI-kabel loskoppelt en weer aansluit, dient u minstens 5 seconden te wachten voordat u de HDMI-kabel weer aansluit. Wanneer u het beelduitvoerapparaat wijzigt, wordt het afspeelapparaat mogelijk niet automatisch gewijzigd.
6. 7. Klik op Alle modi weergeven. Selecteer een van de volgende modi bij Alle modi weergeven. Draadloze weergave Sommige modellen ondersteunen Intel Wireless Display (Intel WiDi), een draadloze technologie die Wi-Fi gebruikt om het mogelijk te maken de computer draadloos te verbinden met externe beeldschermen, met inbegrip van tv's, die als schermuitbreiding worden gebruikt. Met Intel WiDi kunnen documenten, gestreamde/lokale media of andere online inhoud draadloos met anderen worden gedeeld.
beveiligingskabels verschillen per product. Raadpleeg voor meer informatie de instructies bij het product dat u gebruikt. Het beveiligingsslot aansluiten Voer de onderstaande stappen uit om een beveiligingskabel aan te sluiten: 1. 2. Draai de computer met de rechterkant naar u toe. Lijn de beveiligingskabel uit met de sleuf van het beveiligingsslot en zorg ervoor dat deze stevig vastzit. Afbeelding 4-16 Beveiligingsslot 2 1 1. Sleuf beveiligingsslot 2.
Volume Mixer Met het hulpprogramma Volumemixer kunt u het afspeelvolume regelen van apparaten en toepassingen onder Windows. U start het hulpprogramma Volumemixer door te klikken op Bureaublad, met de rechtermuisknop te klikken op het luidsprekerpictogram op de taakbalk en Volumemixer openen te selecteren in het submenu. U past het volume van de luidsprekers of de hoofdtelefoon aan door te schuifregelaar Luidsprekers te verslepen.
Er zijn Amerikaanse octrooien van toepassing op dit product. Zie http:// patents.dts.com. Geproduceerd onder licentie van DTS Licensing Limited. DTS Sound DTS Sound™ gebruikt geavanceerde, gepatenteerde technieken om audiocues die diep in het originele geluidsmateriaal verborgen liggen op te sporen en zo een allesomvattende surround sound te creëren, compleet met diepe, rijke bassen en kristalheldere spraak. DTS Sound wordt bij sommige modellen geleverd.
Hoofdstuk 5 Hulpprogramma's en geavanceerd gebruik In dit hoofdstuk worden de hulpprogramma's en speciale voorzieningen van deze computer beschreven en wordt het geavanceerde gebruik van bepaalde hulpprogramma's toegelicht. Hulpprogramma's en toepassingen In deze paragraaf worden de op de computer voorgeïnstalleerde hulpprogramma's beschreven en er wordt toegelicht hoe u de programma's start. Raadpleeg indien van toepassing de online handleiding, de Helpbestanden of het bestand Leesmij.
TOSHIBAweergavehulpprogramma Het TOSHIBA-weergavehulpprogramma omvat het hulpprogramma Tekstgrootte bureaublad, het hulpprogramma Scherm splitsen en andere instellingen. Met Tekstgrootte bureaublad kunt u de tekst op het bureaublad groter of kleiner maken op basis van uw gebruik en voorkeur. U kunt de tekstgrootte op het scherm en in de titelbalk van vensters wijzigen door de tekstschaal te wijzigen.
TOSHIBA Met het hulpprogramma TOSHIBA Vasteschijfversnelling Vasteschijfversnelling kunt u de toegangssnelheid van de vaste schijf verbeteren door een deel van het hoofdgeheugen van de computer als cache te gebruiken. U opent dit hulpprogramma door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Hulpprogramma's -> Systeeminstellingen -> Vasteschijfversnelling. TOSHIBA VIDEO PLAYER Deze software wordt meegeleverd voor het afspelen van DVD-video.
TOSHIBA Blu-ray Disc Player Deze software wordt meegeleverd voor weergave van een Blu-ray Disc™. De speler heeft een scherminterface en -functies. U start dit hulpprogramma door te klikken op Bureaublad > Desktop Assist (op taakbalk) -> Media & entertainment -> TOSHIBA Blu-ray Disc Player. Raadpleeg het Help-bestand voor meer informatie over het gebruik van TOSHIBA Blu-ray Disc Player.
TOSHIBA PC Health Monitor De toepassing TOSHIBA PC Health Monitor controleert diverse systeemfuncties, zoals stroomverbruik, accustatus en systeemkoeling, en informeert u over belangrijke systeemomstandigheden. Deze toepassing herkent het serienummer van het systeem en van afzonderlijke onderdelen en houdt specifieke activiteiten bij met betrekking tot het gebruik ervan. U opent dit hulpprogramma door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Ondersteuning & herstel -> PC Health Monitor.
Vaste schijf automatisch uitschakelen *1 Met deze functie wordt de vaste schijf automatisch uitgeschakeld als een bepaalde tijd geen activiteit op de vaste schijf heeft plaatsgevonden. De vaste schijf wordt ingeschakeld wanneer deze weer wordt gebruikt. Dit kan worden ingesteld via Energiebeheer.
Sluimerstand Met deze functie kunt u de stroom naar de computer uitschakelen zonder de software te hoeven sluiten. De inhoud van het hoofdgeheugen wordt automatisch op de vaste schijf opgeslagen, zodat u uw werk kunt hervatten op de plaats waar u was opgehouden wanneer u de computer weer aanzet. Raadpleeg het gedeelte De computer uitschakelen voor meer informatie.
Gebruikerswachtwoord U start het hulpprogramma door te klikken op de volgende items: Bureaublad -> Desktop Assist (op taakbalk) -> Hulpprogramma's -> Wachtwoordhulpprogramma -> Gebruikerswachtwoord Gebruikersverificatie is mogelijk vereist om de gebruikersrechten te controleren wanneer u 'TOSHIBA-wachtwoordhulpprogramma' gebruikt om wachtwoorden te verwijderen, te wijzigen en dergelijke. Instellen (knop) Klik op deze knop om een wachtwoord te registreren.
BIOS Setup starten. 1. Klik in de charm Instellingen op Energie en selecteer Opnieuw opstarten. 2. Houd de toets F2 ingedrukt en laat de toets één seconde nadat de computer is ingeschakeld los. Het hulpprogramma BIOS Setup wordt geladen. U sluit BIOS Setup door te drukken op F10 en daarna op ENTER om de wijzigingen te accepteren. De computer wordt opnieuw opgestart.
Het wachtwoord is alleen nodig als de computer is afgesloten in de sluimertand of de opstartmodus. U hebt het niet nodig in de slaapstand en bij opnieuw starten. Voer de volgende stappen uit als u een wachtwoord handmatig wilt invoeren: 1. Schakel de computer in volgens de instructies in het gedeelte Aan de slag. Het volgende bericht wordt weergegeven: Wachtwoord invoeren [ ] Op dit punt werken de functietoetsen niet. U kunt ze pas weer gebruiken nadat u het wachtwoord hebt ingevoerd. 2. 3.
Algemeen: hier ziet u de huidige BIOS-versie en kunt u de standaardwaarde van bepaalde instellingen wijzigen Slaapstand en laden/Slaapstand en muziek: hier kunt u geavanceerde functies instellen voor de slaapstand, de sluimerstand en de uitgeschakelde stand.
De functie Slaapstand en laden werkt mogelijk niet bij bepaalde externe apparaten, zelfs als deze compatibel zijn met de USBspecificatie. Zet in die gevallen de computer aan om het apparaat op te laden. Als de functie 'Slaapstand en laden' is ingeschakeld, krijgen compatibele USB-poorten stroom (5 V gelijkstroom), zelfs als de computer is uitgeschakeld. Er wordt ook stroom (5 V) geleverd aan externe apparaten die op de compatibele USB-poorten zijn aangesloten.
kan worden opgeladen in de automatische modus, schakelt u over naar de alternatieve modus. Deze functie kan mogelijk niet worden gebruikt met bepaalde aangesloten externe apparaten, ook al is de juiste modus geselecteerd. Schakel in dat geval de functie uit en gebruik deze niet meer. Sommige externe apparaten kunnen de automatische modus niet gebruiken.
De functie 'CDP-oplaadmodus bij ingeschakeld systeem' werkt mogelijk niet bij bepaalde externe apparaten, zelfs als deze compatibel zijn met de USB-specificatie. Gebruik in dat geval een USB-poort zonder de functie 'USB-slaapstand en laden' of schakel 'CDP-oplaadmodus bij ingeschakeld systeem' uit. Het wordt aanbevolen de netadapter aan te sluiten op de computer terwijl een USB-poort van stroom (5 V gelijkstroom, 1,5 A) wordt voorzien.
Tik/klik op de knop Vernieuwen in de app-opdrachten om de inhoud in het bibliotheekscherm te vernieuwen. Dit wordt niet automatisch vernieuwd. Als de slaapstand, sluimerstand, uitgeschakelde stand actief is of opnieuw wordt opgestart tijdens het uploaden van bestanden naar SkyDrive, wordt de bewerking niet correct voltooid. Deze app ondersteunt geen weergave van inhoud die is beveiligd met DRM.
Voer de volgende stappen uit om de online Help van TOSHIBA Media Player te openen: Wanneer TOSHIBA Media Player wordt uitgevoerd, klikt u op Help in de charm Instellingen. TOSHIBA PC Health Monitor De toepassing TOSHIBA PC Health Monitor controleert diverse systeemfuncties, zoals stroomverbruik, accustatus en systeemkoeling, en informeert u over belangrijke systeemomstandigheden.
TOSHIBA PC Health Monitor starten U kunt TOSHIBA PC Health Monitor starten door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Ondersteuning & herstel -> PC Health Monitor. Het hoofdscherm van TOSHIBA PC Health Monitor wordt weergegeven. Als u klikt op Klik hier om TOSHIBA PC Health Monitor in te schakelen, wordt het scherm 'PC Health Monitor Software Notice & Acceptance' (Kennisgeving en akkoordverklaring voor PC Health Monitor) weergegeven. Lees zorgvuldig de weergegeven informatie.
Gebruik geen energiebesparingsfuncties. Schrijf niet naar het medium terwijl anti-virussoftware actief is. Wacht tot de viruscontrole is beëindigd en schakel vervolgens de antivirussoftware (en eventuele op de achtergrond uitgevoerde bestandscontroleprogramma's) uit. Gebruik geen hulpprogramma's, ook geen hulpprogramma's voor snelle toegang tot de vaste schijf. Doet u dit toch, dan loopt u het risico van storingen en gegevensverlies.
hebt gemaakt. Volg de onderstaande stappen als u deze herstelbewerking wilt uitvoeren: Wanneer u het Windows-besturingssysteem opnieuw installeert, wordt de vaste schijf opnieuw geformatteerd, waardoor alle gegevens erop verloren gaan. Zorg dat de opstartsnelheid is ingesteld op Normaal. (U opent dit door te klikken op Bureaublad -> Desktop Assist (op taakbalk) -> Hulpprogramma's -> Systeeminstellingen -> Opstartopties.
Als u al een herstelschijf hebt gemaakt, kunt u hiermee de herstelpartitie herstellen. Als u geen herstelschijf hebt gemaakt, neemt u voor hulp contact op met de ondersteuning van TOSHIBA. De vooraf geïnstalleerde software herstellen vanaf het herstelschijfstation Een deel van de totale vasteschijfruimte is geconfigureerd als een verborgen herstelpartitie. In deze partitie worden bestanden opgeslagen die kunnen worden gebruikt om vooraf geïnstalleerde software te herstellen in geval van problemen.
Herstelschijven bestellen bij TOSHIBA* U kunt productherstelschijven voor uw notebook bestellen in de TOSHIBA Europe Backup Media Online Shop. * Houd er rekening mee dat deze service niet gratis is. 1. 2. Ga hiervoor naar https://backupmedia.toshiba.eu. Volg de aanwijzingen op het scherm. U ontvangt de herstelschijven binnen twee weken nadat u de bestelling hebt geplaatst.
Hoofdstuk 6 Problemen oplossen TOSHIBA heeft met deze computer een duurzaam product willen maken, maar mochten zich problemen voordoen dan kunt u aan de hand van de procedures in dit hoofdstuk bepalen wat er aan de hand is. Het is raadzaam dat alle gebruikers kennis nemen van dit hoofdstuk omdat als zij weten wat er fout kan gaan, er bepaalde problemen kunnen worden vermeden.
Controleer of alle kabels op de juiste manier zijn aangesloten en stevig vastzitten. Loszittende kabels kunnen signaalfouten veroorzaken. Controleer alle verbindingskabels op losse draden en alle connectoren op losse pinnen. Controleer of een eventuele schijf correct is geplaatst Maak uitgebreide notities van uw bevindingen en bewaar deze in een permanent foutenlogboek. Hierdoor kunt u gemakkelijker aan de TOSHIBA-ondersteuning uitleggen wat de problemen zijn.
Software De problemen worden wellicht door uw software of schijfje veroorzaakt. Als u een softwarepakket niet kunt laden, is het medium of het programma misschien beschadigd. Probeer in dat geval een andere kopie van de software te laden. Als tijdens het gebruik van een softwarepakket een foutbericht verschijnt, raadpleegt u de softwaredocumentatie. Deze bevat meestal een gedeelte over probleemoplossing of een samenvatting van foutberichten.
2. 3. Selecteer het programma dat u wilt sluiten en klik op Taak beëindigen. Nadat het programma is gesloten, zou u moeten kunnen doorwerken. Zo niet, ga dan verder met de volgende stap. Sluit de overige programma’s een voor een door de programmanaam te selecteren en op Taak beëindigen te klikken. Nadat u alle programma's hebt gesloten, zou u verdere moeten kunnen werken. Zo niet, zet dan de computer uit en start opnieuw op. De computer wordt niet opgestart.
Voeding Toetsenbord Intern beeldscherm Vaste schijf Optisch station Geheugenkaart Aanwijsapparaat USB-apparaat Aanvullende geheugenmodule Geluidssysteem Externe monitor LAN Draadloos LAN Bluetooth Voeding Als de computer niet op een stopcontact is aangesloten, is de accueenheid de voornaamste voedingsbron.
Probleem Procedure Netadapter voorziet Controleer de aansluitingen en kijk of het netsnoer/ de computer niet van netadapter goed aan de computer vastzit en of het stroom. stopcontact in orde is. Controleer de toestand van het snoer en de aansluitpunten. Als het snoer versleten of beschadigd is, moet het worden vervangen, als de aansluitpunten vervuild zijn, reinigt u deze met een schone, droge doek.
RTC (Real Time Clock) Probleem Procedure De BIOS-instelling en systeemdatum/tijd zijn verloren gegaan. De RTC-batterij heeft geen lading meer. U moet de datum en tijd opnieuw instellen via BIOS Setup door de volgende stappen uit te voeren: 1. 2. 3. 4. 5. 6. Klik in de charm Instellingen op Energie en selecteer Opnieuw opstarten. Houd de toets F2 ingedrukt en laat de toets één seconde nadat de computer is ingeschakeld los. Het hulpprogramma BIOS Setup wordt geladen.
Probleem Procedure Er verschijnen vlekken op het beeldscherm. Deze vlekken kunnen zijn veroorzaakt door contact met het toetsenbord of het touchpad bij het sluiten van het scherm. Probeer de vlekken te verwijderen door het scherm voorzichtig af te vegen met een schone, droge doek of, als dit niet lukt, met een goed lcd-reinigingsmiddel. In dit laatste geval moet u altijd de instructies volgen bij de schermreiniger en het scherm goed laten drogen voordat u het sluit.
Probleem Procedure U krijgt geen toegang tot een CD/ DVD/Blu-ray Disc™ in het station Controleer of de stationslade goed is gesloten. Duw zachtjes totdat de lade vastklikt. Open de schijflade en controleer of de schijf goed is geplaatst. De schijf moet plat op het ladeoppervlak liggen met het opschrift omhoog. Een vreemd voorwerp in de schijflade kan verhinderen dat de laser de schijf leest. Zorg dat de laser niet wordt geblokkeerd. Verwijder eventuele voorwerpen. Controleer of de schijf vuil is.
Touchpad Probleem Procedure Het touchpad werkt niet. Controleer de apparaatinstellingen. Schermaanwijzer reageert niet wanneer het aanwijsapparaat wordt gebruikt In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbel aantikken (touchpad) werkt niet. Probeer in dit geval eerst om de dubbelkliksnelheid te wijzigen in het hulpprogramma voor muisbesturing.
USB-muis Probleem Procedure Schermaanwijzer reageert niet wanneer de muis wordt gebruikt. In dit geval kan het systeem bezet zijn. Beweeg de muis nogmaals nadat u enkele ogenblikken hebt gewacht. Dubbelklikken werkt niet. Probeer in dit geval eerst om de dubbelkliksnelheid te wijzigen in het hulpprogramma voor muisbesturing. Koppel de muis los van de computer, sluit hem weer aan op een vrije USB-poort en zorg ervoor dat hij stevig vast zit. 1. 2. 3.
Probleem Procedure USB-apparaat werkt niet. Koppel het USB-apparaat los van de computer, sluit het weer aan op een vrije poort en zorg dat het stevig vast zit. Zorg ervoor dat de benodigde USBstuurprogramma's correct zijn geïnstalleerd. Raadpleeg hiervoor zowel de documentatie van de apparatuur als van het besturingssysteem. Functie Slaapstand en laden Voor meer informatie en instellingen raadpleegt u het gedeelte USBslaapstand en laden.
Probleem Procedure De accu raakt snel leeg, zelfs nadat ik de computer heb uitgeschakeld. Als de functie Slaapstand en laden is ingeschakeld, neemt de lading van de accu af als de computer in de sluimerstand staat of is uitgeschakeld. Sluit de netadapter aan op de computer of schakelt de functie Slaapstand en laden uit. Externe apparaten die zijn aangesloten op een compatibele poort werken in dit geval niet.
Probleem Procedure Hinderlijk geluid hoorbaar. Dit wordt mogelijk veroorzaakt door feedback van de interne microfoon of een externe microfoon die op de computer is aangesloten. Raadpleeg Geluidssysteem en videomodus voor meer informatie. U kunt het volume niet aanpassen terwijl Windows wordt opgestart of afgesloten. Als u het probleem nog steeds niet kunt oplossen, neemt u contact op met de Toshiba-ondersteuning.
Probleem Procedure Het scherm blijft leeg. Stel het contrast en de helderheid op de externe monitor bij. Druk op de functietoets om de beeldschermprioriteit te wijzigen, zodat deze niet alleen op het interne beeldscherm is ingesteld. Controleer of de externe monitor is aangesloten.
Draadloos LAN Probleem Procedure Kan geen toegang krijgen tot draadloos LAN Controleer of de functie voor draadloze communicatie van de computer is ingeschakeld. Als de problemen aanhouden, neemt u contact op met de LAN-beheerder. Bluetooth Probleem Procedure Kan geen toegang Controleer of de functie voor draadloze krijgen tot Bluetooth- communicatie van de computer is ingeschakeld. apparaat.
Technische ondersteuning van TOSHIBA Als u het probleem nog steeds niet kunt oplossen en vermoedt dat dit te maken heeft met de hardware, leest u het bijgevoegde garantieboekje of gaat u naar www.toshiba-europe.com.
Hoofdstuk 7 Aanhangsel Specificaties Dit gedeelte geeft een overzicht van de technische kenmerken van de computer. Gewicht en afmetingen Bij de onderstaande fysieke afmetingen zijn uitstekende delen niet inbegrepen. De fysieke afmetingen hangen af van het gekochte model. Grootte Circa 413,0 (b) x 268 (d) x 31,31~33,70 (h) millimeter Circa 413,0 (b) x 268 (d) x 30,66~33,05 (h) millimeter (uitstekende delen niet inbegrepen).
Computer 19 V gelijkstroom Pintoewijzing van poort voor externe RGB-monitor 5 1 15 11 10 6 Pin Signaalnaam Beschrijving I/O 1 CRV Rood videosignaal O 2 CGV Groen videosignaal O 3 CBV Blauw videosignaal O 4 Gereserveerd Gereserveerd 5 GND Aarde 6 GND Aarde 7 GND Aarde 8 GND Aarde 9 +5 V Stroomvoorziening 10 GND Aarde 11 Gereserveerd Gereserveerd 12 SDA Gegevenssignaal I/O 13 HSYNC Signaal voor horizontale synchronisatie O 14 VSYNC Signaal voor vertica
Kabeldikte: Minimaal 0,75 mm2 Stroomsterkte: Minimaal 2,5 ampère Certificeringsinstanties China: CQC VS en Canada: Goedgekeurd door UL en CSA Nee.
Australië Europa Goedgekeurd door AS Goedgekeurd door de desbetreffende instantie Canada China Goedgekeurd door CSA Goedgekeurd door CCC Informatie voor draadloze apparaten Onderlinge samenwerking tussen draadloze producten Het draadloze LAN is compatibel met LAN-systemen met de Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radiotechnologie en voldoet aan de volgende normen: De IEEE 802.
Ga naar http://www.pc.support.global.toshiba.com als u vragen hebt over het gebruik van de draadloos LAN- of Bluetooth-kaart van TOSHIBA. In Europa gaat u naar http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm Draadloze apparaten en uw gezondheid Net als andere radioapparaten stralen draadloze producten hoogfrequente (HF) elektromagnetische energie uit.
Schakel alle draadloze functies uit in de buurt van personen bij wie mogelijk een pacemaker of een ander medisch elektrisch apparaat is geïmplanteerd. Radiogolven kunnen de werking van de pacemaker of het medische apparaat beïnvloeden met mogelijk ernstig letsel tot gevolg. Volg de instructies van uw medische apparaat als u gebruikmaakt van een draadloze functie.
Draadloze communicatie is vaak gebonden aan plaatselijke voorschriften voor radiocommunicatie. Hoewel netwerkproducten voor draadloos LAN zijn ontworpen voor gebruik op de vrij toegankelijk band 2,4 GHz en 5 GHz, is het mogelijk dat onder plaatselijke radiovoorschriften beperkingen worden gesteld aan het gebruik van apparatuur voor draadloze communicatie.
Radioverbindingen U kunt eenvoudig verbindingen tot stand brengen tussen twee of meer apparaten, deze verbindingen worden gehandhaafd zelfs als de apparaten buiten het gezichtsveld van elkaar liggen. RFI-vereisten Dit apparaat werkt in het frequentiebereik 5,15 tot 5.25 GHz en kan daarom alleen binnenshuis worden gebruikt.
Beperkingen voor gebruik van de frequenties tussen 5150-5350 MHz in Europa Italië: - Voor privégebruik is algemene goedkeuring vereist als WAS/ RLAN's buiten de eigen locatie wordt gebruikt. Luxemburg: Geïmplementeerd Algemene goedkeuring is vereist voor netwerk- en servicelevering. Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2.
Russische Federatie: Beperkt e.i.r.p 100 mW. Gebruik is alleen toegestaan binnenshuis, in afgesloten industriële gebieden en opslagplaatsen en aan boord van vliegtuigen. 1. 2. Gebruik is toegestaan voor lokale netwerken voor servicecommunicatie tussen luchtvaartpersoneel aanboord van een vliegtuig op het vliegveld en tijdens alle vluchtstadia. Gebruik is toegestaan voor openbare draadloze lokale netwerken aan boord van een vliegtuig tijdens de vlucht op een hoogte van meer dan 3000 m.
Het uitgestraalde uitgangsvermogen van het draadloze apparaat ligt ruimschoots onder de FCC-limieten voor blootstelling aan HF-straling. Niettemin dient het draadloze apparaat zodanig te worden gebruikt dat fysiek contact tijdens normaal gebruik tot een minimum beperkt blijft. In een normale gebruiksconfiguratie mag de afstand tussen de antenne en de gebruiker niet minder dan 20 cm zijn. Raadpleeg de gebruikershandleiding van de computer voor meer informatie over de locatie van de antenne.
tussen 2.400 en 2.483,5 MHz voor tweedegeneratiesystemen voor gegevenscommunicatie met laag vermogen zoals deze apparatuur. 1.
1. 2. 3. 4. 2.4: Deze apparatuur gebruikt een frequentie van 2,4 GHz. FH: Deze apparatuur gebruikt FH-SS-modulatie. 1: Het storingsbereik van deze apparatuur is minder dan 10 m. : Deze apparatuur gebruikt een frequentiebandbreedte van 2.400 MHz tot 2.483,5 MHz. Het is onmogelijk de bandbreedte van identificatiesystemen voor mobiele objecten te omzeilen. 4. Over de JEITA Draadloos LAN op 5 GHz ondersteunt het kanaal W52/W53/W56.
Radiogoedkeuringen voor draadloze apparaten Deze apparatuur is goedgekeurd volgens de radionormen van de landen/ gebieden in de onderstaande tabel. Als u deze apparatuur gebruikt in landen/regio's die niet in de onderstaande tabel staan, neemt u contact op met de ondersteuning van TOSHIBA.
gebruik van standaardtelefoonlijnen of langzame netwerkverbindingen; gebruik van complexe ontwerpsoftware, bijvoorbeeld geavanceerde CAD-toepassingen; gelijktijdig gebruik van verschillende toepassingen of functies; gebruik van de computer in gebieden met lage luchtdruk (grote hoogte van meer dan 1000 meter boven zeeniveau); gebruik van de computer bij temperaturen tussen 5°C en 30°C of hoge dan 25°C op grote hoogte.
Diverse systeemcomponenten (zoals de GPU van de grafische kaart en PCI-apparaten zoals draadloos LAN) vereisen hun eigen geheugenruimte. Aangezien een 32-bits besturingssysteem niet meer dan 4 GB geheugen kan adresseren, overlappen deze systeembronnen het fysieke geheugen. Het is een technische beperking dat het overlappende geheugen niet beschikbaar is voor het besturingssysteem.
energie wordt gebruikt. Het is niet mogelijk de helderheid van het scherm te vergroten. GPU (Graphics Processing Unit) De prestaties van de Graphics Processing Unit (GPU) hangen af van het productmodel, de ontwerpconfiguratie, de toepassingen, de instellingen voor energiebeheer en de gebruikte functies. De GPU-prestaties worden alleen geoptimaliseerd wanneer het apparaat op netstroom werkt. De prestaties zijn aanzienlijk minder wanneer de accu wordt gebruikt.
Index A C Aanwijsapparaat touchpad 3-9 Accu capaciteit controleren 4-26 energiebesparingsmodus 5-6 gebruiksduur verlengen 4-27 typen 4-23 Controlelijst van apparatuur 2-1 D DC IN lampje 3-1 DC IN-/acculampje 3-15 Documentatielijst 2-1 Accu-eenheid vervangen 4-28 Draadloze communicatie 7-5 Dubbel aanwijsapparaat touchpad 6-10 Acculampje 3-15 ASCII-tekens 4-6 DVD Super Multi-station gebruik 4-7 schrijven 4-10 B Batterij Real Time Clock 4-23 RTC-batterij 3-11 Beeldscherm automatisch uitschakelen 5-5 op
Geluidssysteem problemen 6-13 P Problemen accu 6-6 controlelijst voor hardware en systeem 6-4 dubbel aanwijsapparaat 6-9 externe monitor 6-14 geheugenkaart 6-9 geluidssysteem 6-13 Intern beeldscherm 6-7 netvoeding 6-5 probleem analyseren 6-2 Real Time Clock 6-7 toetsenbord 6-7 TOSHIBAondersteuning 6-16 touchpad 6-10 uitschakelen bij oververhitting 6-5 USB-apparaat 6-11 USB-muis 6-11 vaste schijf 6-8 voeding 6-5 H HDMI-uit-poort 3-4 Herstelmedia 5-18, 5-21 Herstelschijfstation 5-20 L LAN aansluiten 4-30 t
T supervisor 5-9 Toetsenbord functietoetsen 4-4 Functietoetsen F1...