Benutzerhandbuch C670/C670D/L770/L775/ L770D/L775D
C670/C670D/L770/L775/L770D/L775D Inhaltsverzeichnis Vorwort Allgemeine Vorsichtsmaßnahmen Kapitel 1 Erste Schritte Teileprüfliste .......................................................................................... 1-1 Erste Schritte ......................................................................................... 1-2 Kapitel 2 Hardware-Überblick Überblick über den C670/C670D .......................................................... 2-1 Überblick über den L770/L775/L770D/L775D ...........
C670/C670D/L770/L775/L770D/L775D Sonderfunktionen .................................................................................. 4-6 Verwenden des TOSHIBA Schlaf-Dienstprogramms ......................... 4-8 Verwendung von TOSHIBA Face Recognition ................................. 4-11 Passwort-Utility ................................................................................... 4-15 HW Setup ..............................................................................................
C670/C670D/L770/L775/L770D/L775D Copyright ©2011 by TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig. Bezüglich der Nutzung der in diesem Handbuch enthaltenen Informationen wird keine Patenthaftung übernommen.
C670/C670D/L770/L775/L770D/L775D ConfigFree ist eine Marke der TOSHIBA Corporation. TouchPad ist eine Marke von Synaptics, Inc Wi-Fi ist eine eingetragene Marke der Wi-Fi Alliance. Secure Digital und SD sind Marken der SD Card Association. Memory Stick und Memory Stick PRO sind Marken oder eingetragene Marken der Sony Corporation. MultiMediaCard und MMC sind Marken der MultiMediaCard Association. Atheros ist eine eingetragene Marke von Atheros Communication, Inc.
C670/C670D/L770/L775/L770D/L775D die nicht ausdrücklich von TOSHIBA oder von durch TOSHIBA autorisierten Dritten genehmigt wurden, verlieren Sie möglicherweise das Recht, dieses Gerät zu verwenden. FCC-Bedingungen Dieses Gerät entspricht Teil 15 der FCC-Bestimmungen. Der Betrieb unterliegt folgenden Bedingungen: 1. 2. Dieses Gerät darf keine störenden Interferenzen verursachen.
C670/C670D/L770/L775/L770D/L775D dann erfüllt, wenn Optionen (z.B. Grafikkarte, Modem) oder Kabel (z.B. Druckerkabel), die nicht von TOSHIBA hergestellt oder vertrieben werden, angeschlossen oder eingebaut werden. In diesem Fall ist die Person, die diese Optionen / Kabel angeschlossen / eingebaut hat, dafür verantwortlich, dass die erforderlichen Normen erfüllt werden.
C670/C670D/L770/L775/L770D/L775D Kanadische Zulassungsbestimmungen (nur für Kanada) Dieses digitale Gerät überschreitet nicht die Klasse-B-Grenzen für Störgeräusche, die von digitalen Geräten abgegeben werden, wie in der Radio Interference Regulation des Canadian Department of Communications festgelegt.
C670/C670D/L770/L775/L770D/L775D Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Batterien und/oder Akkus getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Wenn die Batterie bzw. der Akku höhere als die in der Batterierichtlinie (2006/66/EG) angegebenen Werte von Blei (Pb), Quecksilber (Hg) und/oder Kadmium (Cd) enthält, werden die chemischen Symbole für Blei (Pb), Quecksilber (Hg) und/oder Kadmium (Cd) unter dem durchgestrichenen Mülltonnensymbol aufgeführt.
C670/C670D/L770/L775/L770D/L775D REACH - Konformitätserklärung Am 1. Juni 2007 trat die neue Chemikalienverordnung der Europäischen Union (EU), REACH, in Kraft. REACH steht für Registration, Evaluation, Authorization and Restriction of Chemicals (Registrierung, Bewertung, Zulassung und Beschränkung von Chemikalien). Toshiba erfüllt alle REACH-Anforderungen und ist verpflichtet, den Kunden gemäß REACHVerordnung über die chemischen Substanzen in Toshiba-Produkten zu informieren.
C670/C670D/L770/L775/L770D/L775D DVD-SuperMulti mit Double Layer UJ8A0 BD-Combo UJ141 BD-Writer UJ240 Location of the required label on the optical disc drive 2. HITACHI-LG Data Storage, Inc. DVD SuperMulti mit Double Layer GT30N/30F BD-Combo CT31F BD-Writer BT11F Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINATO-KU,TOKYO,108-0022 JAPAN 3.
C670/C670D/L770/L775/L770D/L775D Vorsichtsmaßnahmen CAUTION: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an das nächste autorisierte ServiceCenter, wenn Probleme mit diesem Modell auftreten. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden.
C670/C670D/L770/L775/L770D/L775D Vorwort Mit dem Kauf dieses Computers haben Sie eine gute Entscheidung getroffen. Dieser leistungsstarke Notebook-Computer wird Sie jahrelang verlässlich bei der Arbeit unterstützen und bietet dabei hervorragende Erweiterungsmöglichkeiten sowie Multimediafähigkeit. In diesem Handbuch wird beschrieben, wie Sie Ihren Computer einrichten und verwenden.
C670/C670D/L770/L775/L770D/L775D ABC Wenn Sie für einen Vorgang auf ein Symbol klicken oder Text eingeben müssen, wird der Name des Symbols oder der einzugebende Text in der links dargestellten Schriftart wiedergegeben. Anzeige ABC Namen von Fenstern oder Symbolen sowie Text, der vom Computer ausgegeben und auf dem Bildschirm angezeigt wird, wird in der links dargestellten Schrift wiedergegeben. Hinweise Wichtige Informationen werden in diesem Handbuch auf zwei Arten dargestellt.
C670/C670D/L770/L775/L770D/L775D Allgemeine Vorsichtsmaßnahmen TOSHIBA-Computer gewährleisten ein Optimum an Sicherheit, verringern die gesundheitliche Belastung durch Überanstrengung und minimieren die Risiken beim mobilen Einsatz der Geräte. Dennoch können Sie durch Einhaltung einiger Vorsichtsmaßnahmen dazu beitragen, gesundheitliche Beeinträchtigungen oder Schäden am Computer zu vermeiden. Lesen Sie deshalb unbedingt die nachfolgenden Hinweise und die mit „Vorsicht“ markierten Abschnitte im Handbuch.
C670/C670D/L770/L775/L770D/L775D Geräte, die elektromagnetische Felder erzeugen, wie Stereolautsprecher (andere als an den Computer angeschlossene Lautsprecher) oder Freisprechanlagen. Rasche Temperaturwechsel oder Veränderungen der Luftfeuchtigkeit und deren Verursacher (z. B. Lüftungsschlitze von Klimaanlagen oder Heizungen). Extreme Hitze, Kälte oder Luftfeuchtigkeit.
C670/C670D/L770/L775/L770D/L775D dem Computer und einem Mobiltelefon, das gerade verwendet wird, eingehalten werden. Handbuch für sicheres und angenehmes Arbeiten Alle wichtigen Informationen zur sicheren und richtigen Verwendung des Computers finden Sie im mitgelieferten Handbuch für sicheres und angenehmes Arbeiten. Sie sollten es lesen, bevor Sie am Computer arbeiten.
C670/C670D/L770/L775/L770D/L775D Kapitel 1 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Einige der in diesem Handbuch beschriebenen Einrichtungen funktionieren eventuell nicht ordnungsgemäß, wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Resolution+ Plug-in For Windows Media Player Corel Digital Studio TOSHIBA eco Utility TOSHIBA Bulletin Board TOSHIBA ReelTime TOSHIBA HW Setup TOSHIBA Value Added Package TOSHIBA Web-Kamera-Anwendung TOSHIBA Face Recognition TOSHIBA Service Station TOSHIBA PC Health Monitor TOSHIBA Schlaf- Dienstprogramm TOSHIBA Wireless-LAN-Anzeige TOSHIBA Media Controller Online Manual Je nach Modell verfügen Sie möglicherweise nicht über sämtliche oben aufgeführte Software.
C670/C670D/L770/L775/L770D/L775D Formatieren Sie Speichermedien nie, ohne zuvor den Inhalt zu überprüfen - beim Formatieren werden alle gespeicherten Daten gelöscht. Es ist empfehlenswert, den Inhalt des eingebauten Festplattenlaufwerks oder anderer wichtiger Speichergeräte regelmäßig auf externen Medien zu sichern. Die allgemein verwendeten Speichermedien sind nicht dauerhaft stabil; unter bestimmten Umständen können Daten verloren gehen.
C670/C670D/L770/L775/L770D/L775D Das mitgelieferte Netzkabel entspricht den Sicherheitsvorschriften und Bestimmungen in der Vertriebsregion, in der das Produkt gekauft wurde, und sollte nicht außerhalb dieser Region verwendet werden. Für die Verwendung in anderen Ländern/Gebieten erwerben Sie bitte Netzkabel, die den jeweiligen Sicherheitsvorschriften und Bestimmungen entsprechen. Verwenden Sie keinen 3-zu-2-Kontaktadapter.
C670/C670D/L770/L775/L770D/L775D Je nach Modell wird der Computer entweder mit einem 2-Kontakt-Stecker/Kabel oder mit einem 3-Kontakt-Stecker/-Kabel geliefert. 2. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in die Gleichstrom-Eingangsbuchse DC IN 19V auf der linken Seite des Computers. Abbildung 1-3 Gleichstromausgangsstecker an den Computer anschließen (L770/L775/L770D/L775D) 1 2 1. 19-V-Gleichstromeingang (DC IN) 3. 2.
C670/C670D/L770/L775/L770D/L775D Klappen Sie den Bildschirm nicht zu weit auf, da hierbei die Scharniere des Bildschirms zu großen Belastungen ausgesetzt werden und es zu Beschädigungen kommen kann. Drücken Sie nicht auf den Bildschirm. Heben Sie den Computer nicht am Bildschirm hoch. Schließen Sie den Bildschirm nicht, wenn sich Stifte oder andere Gegenstände zwischen dem Bildschirm und der Tastatur befinden.
C670/C670D/L770/L775/L770D/L775D Abbildung 1-6 Einschalten des Computers (L770/L775/L770D/L775D) 1 1. Ein/Aus-Taste Erstmaliges Starten des Systems Der Einrichtungsbildschirm von Windows 7 ist der erste Bildschirm, der nach dem Einschalten angezeigt wird. Befolgen Sie die Anweisungen auf dem Bildschirm, um das Betriebssystem korrekt zu installieren. Lesen Sie die Software-Lizenzbedingungen sorgfältig durch, wenn sie angezeigt werden.
C670/C670D/L770/L775/L770D/L775D 2. Nehmen Sie die Disc erst dann aus dem Laufwerk, wenn der Computer auf keines der Laufwerke mehr zugreift. Vergewissern Sie sich, dass die LED Festplatte/Optisches Laufwerk nicht mehr leuchtet. Wenn Sie den Computer ausschalten, während er noch auf ein Laufwerk zugreift, riskieren Sie Datenverlust oder eine Beschädigung des Datenträgers. Schalten Sie das Gerät nie aus, während eine Anwendung ausgeführt wird. Dies könnte zu Datenverlust führen.
C670/C670D/L770/L775/L770D/L775D Nehmen Sie nicht den Akku aus dem Computer, während dieser sich im Energiesparmodus befindet; es sei denn, der Netzadapter ist angeschlossen. Die Daten im Arbeitsspeicher gehen verloren. Wenn der Netzadapter angeschlossen ist, wechselt der Computer entsprechend den Einstellungen in den Energieoptionen in den Energiesparmodus (um die Energieoptionen aufzurufen, klicken Sie auf Start -> Systemsteuerung -> System und Sicherheit -> Energieoptionen).
C670/C670D/L770/L775/L770D/L775D Klicken Sie auf Start, zeigen Sie auf das Pfeilsymbol ( ) und wählen Sie Energiesparmodus aus dem Menü. Schließen Sie den Bildschirm. Diese Funktion muss zuvor in den Energieoptionen aktiviert werden (um die Energieoptionen aufzurufen, klicken Sie auf Start -> Systemsteuerung -> System und Sicherheit -> Energieoptionen). Betätigen Sie die Ein/Aus-Taste.
C670/C670D/L770/L775/L770D/L775D Bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Ruhezustand befindet. Dabei können Daten verloren gehen. Vorteile des Ruhezustands Der Ruhezustand bietet die folgenden Vorteile: Die Daten werden auf der Festplatte gespeichert, wenn der Computer wegen geringer Akkuenergie automatisch heruntergefahren wird. Beim Einschalten des Computers können Sie sofort in der zuletzt verwendeten Arbeitsumgebung fortfahren.
C670/C670D/L770/L775/L770D/L775D auf dem Festplattenlaufwerk zu speichern. Während dieser Zeit leuchtet die LED Festplatte/Speichermedium. Nachdem Sie den Computer ausgeschaltet haben und der Inhalt des Arbeitsspeichers auf dem Festplattenlaufwerk gespeichert wurde, schalten Sie die angeschlossenen Peripheriegeräte aus. Schalten Sie den Computer oder die Peripheriegeräte nicht sofort wieder ein. Warten Sie einen Moment, damit die Kondensatoren vollständig entladen werden können.
C670/C670D/L770/L775/L770D/L775D Kapitel 2 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie in Anhang C, Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
C670/C670D/L770/L775/L770D/L775D LED „Power“ Die LED Power leuchtet normalerweise grün, wenn der Computer eingeschaltet ist. Wenn Sie jedoch den Computer in den Energiesparmodus schalten, blinkt diese Anzeige grün – ungefähr zwei Sekunden lang ein, zwei Sekunden lang aus –, sowohl während das System heruntergefahren wird als auch während es ausgeschaltet ist. Linke Seite Diese Abbildung zeigt die linke Seite des Computers. Abbildung 2-2 Linke Seite des Computers 1 2 3 1.
C670/C670D/L770/L775/L770D/L775D Anschluss für einen externen RGB-Monitor Über diesen Anschluss können Sie einen externen RGB-Monitor an den Computer anschließen. Informationen zur Pinbelegung beim Anschluss für einen externen RGB-Monitor finden Sie in Anhang A. LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen. Unterstützt werden Ethernet-LANs mit 10 Megabit/Sekunde (10BASE-T) oder Fast Ethernet-LANs mit 100 Megabit/Sekunde (100BASE-TX).
C670/C670D/L770/L775/L770D/L775D Bitte beachten Sie, dass keine Garantie für den einwandfreien Betrieb sämtlicher Funktionen aller USB-Geräte übernommen werden kann. Wir möchten Sie daher darauf hinweisen, dass einige mit einem spezifischen Gerät verbundene Funktionen möglicherweise nicht richtig funktionieren. Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern, in den Speichermediensteckplatz oder die USB-Anschlüsse gelangen.
C670/C670D/L770/L775/L770D/L775D Abbildung 2-4 Die Rückseite des Computers 1 1. Akku Akku Der wiederaufladbare Lithium-Ionen-Akku versorgt den Computer mit Strom, wenn kein Netzadapter angeschlossen ist. Nähere Informationen zur Verwendung und zum Betrieb des Akkus finden Sie in Kapitel 5, Stromversorgung und Startmodi. Rechtliche Hinweise (Akkulebensdauer) Weitere Informationen zur Akkulebensdauer finden Sie in Anhang C, „Rechtliche Hinweise“.
C670/C670D/L770/L775/L770D/L775D Akkufreigabe Schieben Sie diese Verriegelung bis zur Position „Entriegeln“ und halten Sie sie, um den Akku zu entsichern. Nähere Informationen zum Entfernen des Akkus finden Sie in Kapitel 5, Stromversorgung und Startmodi. Sockel für Speichermodul Der Sockel für Speichermodule ermöglicht den Einbau, Austausch und das Entfernen zusätzlicher Speichermodule.
C670/C670D/L770/L775/L770D/L775D Abbildung 2-6 Vorderseite des Computers mit geöffnetem Bildschirm 5 2 3 4 1 11 6 8 7 11 9 6 10 1. Bildschirm 2. Webcam-LED* 3. Webcam* 4. Mikrofon* 5. Bluetooth-Antenne und WLANAntennen (nicht abgebildet)* 6. Stereolautsprecher 7. Ein/Aus-Taste 8. Tastatur 9. Touchpad 10. Touchpad-Klicktasten 11. LCD-Scharniere * Bei einigen Modellen verfügbar. Bildschirm 43.9 cm (17.3") LCD-Bildschirm, 16 Mio.
C670/C670D/L770/L775/L770D/L775D Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können die Webcam für Video-Chats oder Videokonferenzen einsetzen, wenn Sie ein Tool wie etwa Windows Live Messenger verwenden. Mit der TOSHIBA WebKamera-Anwendung können Sie verschiedene Videoeffekte auf Ihre Videos oder Fotos anwenden. Sie aktiviert die Übertragung von Video und die Verwendung von Video-Chat über das Internet mit speziellen Anwendungen.
C670/C670D/L770/L775/L770D/L775D Stereolautsprecher Über die Lautsprecher werden der von der verwendeten Software erzeugte Klang sowie die vom System erzeugten akustischen Alarmsignale, zum Beispiel bei niedriger Akkuladung, ausgegeben. Ein/Aus-Taste Drücken Sie auf diese Taste, um den Computer ein- oder auszuschalten. Tastatur Die Computertastatur verfügt über eine integrierte numerische Tastatur, CursorOverlaytasten sowie die Tasten und .
C670/C670D/L770/L775/L770D/L775D Abbildung 2-7 Vorderseite des Computers mit geschlossenem Bildschirm 1 2 3 1. LED „DC IN“ 2. Power-LED 3. LED „Akku“ 4 5 6 4. LED „Festplatte/Optisches Laufwerk“ 5. LED „Speichermediensteckplatz“ 6. LED für die drahtlose Kommunikation LED „DC IN“ Die Anzeige DC IN leuchtet normalerweise weiß, wenn der Computer über den Netzadapter ordnungsgemäß mit Gleichstrom versorgt wird.
C670/C670D/L770/L775/L770D/L775D LED „Drahtlose Kom- Die LED für die Drahtlose Kommunikation munikation“ leuchtet gelb, wenn die Wireless-Funktionen aktiviert sind. Einige Modelle verfügen über Funktionen für die drahtlose Kommunikation. Linke Seite Diese Abbildung zeigt die linke Seite des Computers. Abbildung 2-8 Linke Seite des Computers 1 2 3 1. 19-V-Gleichstromeingang (DC IN) 2. Lüftungsschlitze 3. Anschluss für einen externen RGBMonitor 4. LAN-Buchse 4 5 6 7 5. USB-Anschluss (USB 2.
C670/C670D/L770/L775/L770D/L775D Anschluss für einen externen RGB-Monitor Über diesen Anschluss können Sie einen externen RGB-Monitor an den Computer anschließen. Informationen zur Pinbelegung beim Anschluss für einen externen RGB-Monitor finden Sie in Anhang A. USB-Anschluss (USB Ein USB-Anschluss, der dem Standard USB 2.0 2.0 oder 3.0) oder 3.0 entspricht, befindet sich an der linken Seite des Computers. Der Anschluss mit dem Symbol unterstützt die Schlaf- und Ladefunktion.
C670/C670D/L770/L775/L770D/L775D Abbildung 2-9 Rechte Seite des Computers 1 2 4 3 1. Kopfhörerbuchse 2. Mikrofonbuchse 3. USB-Anschlüsse (USB 2.0) 5 4. Optisches Laufwerk 5. Schlitz für ein Sicherheitsschloss Darstellung kann je nach Modell abweichen. Kopfhörerbuchse An die Mini-Kopfhörerbuchse mit einem Durchmesser von 3,5mm können Sie einen Stereokopfhörer anschließen. Mikrofonbuchse Die 3,5 mm-Mini-Mikrofonbuchse ermöglicht den Anschluss eines Monomikrofons mit Dreifachleiter-Ministecker.
C670/C670D/L770/L775/L770D/L775D Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern, in den Speichermediensteckplatz oder den USB-Anschluss gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der beschädigt und ein Feuer ausbrechen könnte. Rückseite Die Abbildung unten zeigt die Rückseite des Computers. Abbildung 2-10 Die Rückseite des Computers 1 1.
C670/C670D/L770/L775/L770D/L775D Abbildung 2-11 Unterseite des Computers 1 2 3 4 1. Akkuverriegelung 2. Akkufreigabe 3. Sockel für Speichermodul 4. Lüftungsschlitze Akkuverriegelung Schieben Sie diese Verriegelung zur Seite, um den Akku entfernen zu können. Akkufreigabe Schieben Sie diese Verriegelung bis zur Position „Entriegeln“ und halten Sie sie, um den Akku zu entsichern. Nähere Informationen zum Entfernen des Akkus finden Sie in Kapitel 5, Stromversorgung und Startmodi.
C670/C670D/L770/L775/L770D/L775D verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. Entfernen Sie die Staubansammlungen an den Lüftungsschlitzen vorsichtig mit einem weichen Tuch. Vorderseite mit geöffnetem Bildschirm Diese Abbildung zeigt den Computer mit geöffnetem Bildschirm. Um den Bildschirm zu öffnen, klappen Sie ihn auf und stellen Sie einen angenehmen Neigungswinkel ein.
C670/C670D/L770/L775/L770D/L775D Rechtliche Hinweise (LCD) Weitere Informationen zum LCD finden Sie in Anhang C, Rechtliche Hinweise. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können die Webcam für Video-Chats oder Videokonferenzen einsetzen, wenn Sie ein Tool wie etwa Windows Live Messenger verwenden.
C670/C670D/L770/L775/L770D/L775D Weitere Informationen zur Wireless-LAN-Funktion finden Sie in Anhang C, Rechtliche Hinweise. Bluetooth-Antenne Einige Computer dieser Serie sind mit einer Bluetooth-Antenne ausgestattet. Stereolautsprecher Über die Lautsprecher werden der von der verwendeten Software erzeugte Klang sowie die vom System erzeugten akustischen Alarmsignale, zum Beispiel bei niedriger Akkuladung, ausgegeben.
C670/C670D/L770/L775/L770D/L775D Die tatsächliche Konfiguration richtet sich nach dem Modell, das Sie erworben haben. CPU Der Prozessortyp variiert je nach Modell. Um festzustellen, mit welchem Prozessortyp Ihr Computer ausgestattet ist, öffnen Sie das PCDiagnose-Tool, indem Sie auf Folgendes klicken: Start -> Alle Programme -> TOSHIBA -> Utilitys -> PC-Diagnose-Tool. Rechtliche Hinweise (CPU) Weitere Informationen zur CPU finden Sie in Anhang C, Rechtliche Hinweise.
C670/C670D/L770/L775/L770D/L775D Rechtliche Hinweise (Systemspeicher) Weitere Informationen zum Arbeitsspeicher finden Sie in Anhang C, „Rechtliche Hinweise“. Grafikadapter Der Grafikadapter übersetzt Softwarebefehle in Hardwarebefehle, um bestimmte Teile des Bildschirms ein- oder auszuschalten. Der Grafikadapter steuert auch den Anzeigemodus, der nach Industrienormregeln für die Bildschirmauflösung und mit der Höchstzahl der gleichzeitig auf dem Bildschirm darstellbaren Farben arbeitet.
C670/C670D/L770/L775/L770D/L775D 1. 2. 3. Wählen Sie Basic Mode (Basismodus) und klicken Sie auf OK. Klicken Sie auf Power (Stromversorgung). Wählen Sie aus dem Dropdown-Menü Power Source (Energiequelle) die Option On battery (Akkubetrieb), und aktivieren Sie dann das Kontrollkästchen Display Power Saving Technology (DisplayEnergiesparfunktion).
C670/C670D/L770/L775/L770D/L775D Kapitel 3 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchpads Legen Sie Ihren Finger auf das Touchpad, und bewegen Sie ihn in die gewünschte Richtung. Der Bildschirmzeiger folgt Ihren Bewegungen. Abbildung 3-1 Touchpad und Touchpad-Klicktasten (L770/L775/L770D/L775D) 1 1. Touchpad Ein/Aus-Taste 2. Touchpad 2 3 3.
C670/C670D/L770/L775/L770D/L775D Tastaturanzeigen Die folgenden Abbildungen zeigen die Position der CAPS LOCK-LED und der LED „Numerischer Modus“, die folgende Bedingungen anzeigen: Wenn die CAPS LOCK-Anzeige leuchtet, werden mit den Buchstabentasten der Tastatur Großbuchstaben erzeugt. Wenn die Anzeige NUM LOCK (Numerischer Modus) leuchtet, können Sie mit den entsprechenden 10 Tasten Ziffern eingeben. Abbildung 3-2 CAPS LOCK- und NUM LOCK-Anzeigen (L770/L775/L770D/L775D) 2 1 1. CAPS LOCK 2.
C670/C670D/L770/L775/L770D/L775D Bestimmte Softwareprogramme können die Funktion der Softkeys beeinträchtigen oder deaktivieren. Die Softkey-Einstellungen werden nicht wiederhergestellt, wenn der Computer aus dem Energiesparmodus wieder eingeschaltet wird. Die Tastatur dieses Computers ist so ausgelegt, dass mit ihr alle Funktionen einer erweiterten Tastatur mit 104 Tasten zur Verfügung stehen.
C670/C670D/L770/L775/L770D/L775D Um diese Hilfe aufzurufen, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Utilitys -> FlashCards - Hilfe. Hotkeys In diesem Abschnitt werden die den Hotkeys zugeordneten Funktionen beschrieben. Ton aus Mit FN + ESC schalten Sie den Ton ein und aus. Sperre Mit FN + F1 wird der Computer-Sperrmodus aktiviert. Sie müssen sich erneut anmelden, um den Desktop zu reaktivieren. Energiesparplan Mit FN + F2 ändern Sie die Energiespareinstellungen.
C670/C670D/L770/L775/L770D/L775D Lauter Mit FN + 4 erhöhen Sie die Lautstärke schrittweise. FN-Einrastfunktion Mit dem TOSHIBA Accessibility Utility können Sie einstellen, dass die Taste FN nach einmaligem Drücken einrastet. Tastenkombinationen können dann als Tastenfolge eingegeben werden, d. h. Sie können FN loslassen und dann eine der Funktionstasten (F1 ... F12) drücken. Um das TOSHIBA Accessibility Utility aufzurufen, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Utilitys -> Accessibility.
C670/C670D/L770/L775/L770D/L775D DVD-Super-Multi-Laufwerk mit Unterstützung von DoubleLayer-Discs Das Laufwerk unterstützt die folgenden Formate: CD-ROM, DVD-ROM, DVD-Video, CD-DA, CD-Text, Photo CDTM (Single/Multi-session), CDROM Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD +RW, DVD-RAM, DVD-R DL (Format1), DVD+R DL.
C670/C670D/L770/L775/L770D/L775D 3. Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 3-6 Disc einlegen (L770/L775/L770D/L775D) 1 1. Laserlinse Wenn die Laufwerklade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Lade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten. Nach dem Einpassen muss die Disc jedoch flach in der Lade liegen.
C670/C670D/L770/L775/L770D/L775D Drücken Sie die Entnahmetaste nicht, wenn der Computer noch auf das Laufwerk des Datenträgers zugreift. Warten Sie, bis die Anzeige für das optische Laufwerk nicht mehr leuchtet, bevor Sie die Lade öffnen. Warten Sie außerdem, bis sich die Disc nicht mehr dreht, bevor Sie sie herausnehmen. 1. Drücken Sie auf die Entnahmetaste, um die Lade etwas zu öffnen. Ziehen Sie die Lade dann vorsichtig heraus, bis sie vollständig geöffnet ist.
C670/C670D/L770/L775/L770D/L775D CDs CD–Rs lassen sich nur einmal beschreiben. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. CD-RWs, darunter Multispeed-CD-RWs, Highspeed-CD-RWs und Ultraspeed-CD-RWs, können mehrmals beschrieben werden. DVDs DVD-R, DVD+R, DVD-R DL und DVD+R DL-Discs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. DVD-RW-, DVD+RW- und DVD-RAM-Discs lassen sich mehrmals beschreiben.
C670/C670D/L770/L775/L770D/L775D entweder zu Datenverlust führen oder andere Schäden am Laufwerk oder den Medien verursachen. Haftungssauschluss TOSHIBA ist für die folgenden Schäden nicht haftbar: Schäden an der , die beim Beschreiben bzw. Wiederbeschreiben mit diesem Produkt auftreten. Jegliche Veränderungen bzw. Verluste des aufgezeichneten Inhalts der , die beim Beschreiben bzw.
C670/C670D/L770/L775/L770D/L775D DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8- und 16facher Geschwindigkeit) TAIYO YUDEN Co., Ltd. (für 8-fach- und 16-fach-Medien) DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 8-facher Geschwindigkeit) DVD-RW: DVD-Spezifikationen für wiederbeschreibbare Datenträger für Version 1.1 oder 1.2 Victor Company of Japan, Ltd. (JVC) (für Medien mit 2-, 4- und 6-facher Geschwindigkeit) MITSUBISHI KAGAKU MEDIA CO., LTD.
C670/C670D/L770/L775/L770D/L775D Während des Beschreibens oder Wiederbeschreibens von Discs Beachten Sie während des Schreibens oder Wiederbeschreibens von Discs die folgenden Punkte: Kopieren Sie die Daten von der Festplatte auf das optische Medium. Verwenden Sie nicht die Methode Ausschneiden und Einfügen, da die Daten bei einem Schreibfehler verloren gehen. Vermeiden Sie Folgendes: Benutzerwechsel unter PC-Funktionen ausführen, zum Beispiel Maus oder Touchpad verwenden, Bildschirm öffnen oder schließen.
C670/C670D/L770/L775/L770D/L775D Kopieren Sie keine urheberrechtlich geschützten DVD-Videos und DVD-ROMs mit der TOSHIBA Disc Creator-Funktion „Disc Backup“. Mit der TOSHIBA Disc Creator-Funktion „Disc Backup“ lassen sich keine Sicherungskopien von DVD-RAM-Medien erstellen. Mit der TOSHIBA Disc Creator-Funktion „Disc Backup“ kann keine Sicherungskopie einer CD-ROM, CD-R oder CD-RW auf eine DVD-R, DVD-R DL oder DVD-RW geschrieben werden.
C670/C670D/L770/L775/L770D/L775D 1. 2. Klicken Sie auf Start -> Alle Programme -> TOSHIBA -> CD&DVDAnwendungen -> Disc Creator, um das Utility TOSHIBA Disc Creator aufzurufen. Führen Sie einen der folgenden Schritte aus, um das Einstellungsdialogfeld aufzurufen: Klicken Sie im Modus Daten-CD/DVD in der Haupt-Symbolleiste auf die Einstellungsschaltfläche (). 3. 4. 5. Wählen Sie Einstellungen für jeden Modus -> Daten-CD/DVD im Menü Einstellungen.
C670/C670D/L770/L775/L770D/L775D Wichtige Informationen Beachten Sie die folgenden Einschränkungen beim Brennen von VideoDVD- oder Blu-ray-Disc-Filmen, beim Konvertieren von Dateien oder beim Abspielen von Dateien. Bearbeiten von Digital Video Melden Sie sich mit Administratorberechtigung an, um Corel Digital Studio zu verwenden. Betreiben Sie Ihren Computer mit Netzstrom, wenn Sie Corel Digital Studio verwenden. Betreiben Sie den Computer mit voller Leistung. Verwenden Sie keine Energiesparfunktionen.
C670/C670D/L770/L775/L770D/L775D Prüfen Sie den Datenträger nach der Aufzeichnung wichtiger Daten. Die Ausgabe in den Formaten VCD und SVCD wird nicht unterstützt. Öffnen der Laufwerklade erzwingen. Bespielte DVDs und Blu-ray-Discs Einige DVD-ROM-Laufwerke für Computer oder andere DVD-Player können DVD-R/+R/-RW/+RW/-RAM-Medien unter Umständen nicht lesen. Wenn Sie Ihre aufgezeichnete DVD auf dem Computer abspielen möchten, verwenden Sie die Anwendung TOSHIBA VIDEO PLAYER.
C670/C670D/L770/L775/L770D/L775D Die Wiederaufnahmefunktion kann mit einigen Discs unter TOSHIBA VIDEO PLAYER nicht verwendet werden. Bei der Videowiedergabe sollte der Netzadapter angeschlossen werden. Energiesparfunktionen können die reibungslose Wiedergabe beeinträchtigen. Wenn Sie bei der Wiedergabe von Video-DVDs den Akku verwenden, stellen Sie die Energieoptionen auf „Ausgewogen“. Der Bildschirmschoner ist während der Videowiedergabe mit TOSHIBA VIDEO PLAYER deaktiviert.
C670/C670D/L770/L775/L770D/L775D Wenn das DVD-Video-Bild nicht auf dem externen Monitor oder Fernsehgerät angezeigt wird, beenden Sie TOSHIBA VIDEO PLAYER und ändern Sie die Bildschirmauflösung. Um die Bildschirmauflösung zu ändern, klicken Sie auf Start -> Systemsteuerung -> Darstellung und Personalisierung -> Anzeige -> Auflösung anpassen. Aufgrund der Ausgabe- oder Wiedergabebedingungen können Videos jedoch auf einigen externen Monitoren oder Fernsehgeräten nicht ausgegeben werden.
C670/C670D/L770/L775/L770D/L775D Die 2D-zu-3D-Konvertierungsfunktion ist zu Ihrer Unterhaltung gedacht, damit Sie Ihre eigenen 2D-Videos in 3D genießen können. Der TOSHIBA VIDEO PLAYER ist standardmäßig auf das 2D-Format eingestellt. Wenn Sie die Schaltfläche für die 2D-zu-3DKonvertierungsfunktion betätigen, aktivieren Sie die 2D-zu-3DKonvertierungsfunktion und betrachten Ihre 2D-Inhalte in 3D. TOSHIBA VIDEO PLAYER führt die 2D-zu-3D-Konvertierungsfunktion nicht automatisch aus.
C670/C670D/L770/L775/L770D/L775D Achten Sie darauf, für die 3D-Wiedergabe den Netzadapter anzuschließen. Die 3D-Wiedergabe kann nur im Vollbildmodus erfolgen. Wenn Sie die 3D-Wiedergabe aktivieren, wird das Anzeigefenster automatisch auf Vollbildgröße vergrößert. Damit die 3D-Wiedergabe auf einem externen Anzeigegerät oder Fernsehgerät erfolgen kann, benötigen Sie ein 3D-fähiges Anzeigegerät oder Fernsehgerät mit HDCP-kompatiblen HDMI-Anschluss.
C670/C670D/L770/L775/L770D/L775D TOSHIBA VIDEO PLAYER-Hilfe öffnen Die Funktionen und Anleitungen für TOSHIBA VIDEO PLAYER werden außerdem in der TOSHIBA VIDEO PLAYER 3D-Hilfe genau erklärt. Gehen Sie wie nachstehend beschrieben vor, um die TOSHIBA VIDEO PLAYER 3D-Hilfe zu starten. Klicken Sie im Anzeigebereich auf die Hilfe-Schaltfläche ( ).
C670/C670D/L770/L775/L770D/L775D Spielen Sie keine Blu-ray-Disc ab, während Sie mit der Funktion "Eigene TV-Kanäle" von Windows XP Media Center oder einer anderen Anwendung Fernsehprogramme aufzeichnen. Dies könnte zu Fehlern beim Abspielen der Blu-ray Disc oder bei der Aufnahme der Fernsehsendung führen. Dies gilt auch dann, wenn während der Videowiedergabe einer Blu-ray Disc eine geplante Aufnahme beginnt. Achten Sie darauf, dass keine Aufnahmen geplant sind, wenn Sie eine Blu-ray Disc abspielen.
C670/C670D/L770/L775/L770D/L775D 4. Geben Sie Informationen zum Anzeigegerät an. Monitortyp: Wählen Sie den richtigen Monitortyp im Dropdown-Menü aus. Für die Wiedergabe auf einem externen 3D-fähigen Anzeigegerät oder Fernsehgerät über HDMI wählen Sie „HDMI 1.4 Video Output“. Bildschirmgröße: Geben Sie die Größe (in Zoll) Ihres Computers an. Hinweise zum Abspielen von Blu-ray 3D Bei Modellen mit NVIDIA-Grafik funktioniert die Blu-ray-3DWiedergabe nur im Vollbildmodus.
C670/C670D/L770/L775/L770D/L775D Wenn sich eine Blu-ray-Disc im BD-Laufwerk befindet, startet WinDVD BD automatisch. Wählen Sie Start -> Alle Programme -> Corel -> Corel WinDVD BD , um WinDVD BD zu starten. Bedienung von WinDVD BD for TOSHIBA Hinweise zur Verwendung von WinDVD BD for TOSHIBA. Die Bildschirminhalte und verfügbaren Funktionen unterscheiden sich zwischen BD-Videos und Szenen.
C670/C670D/L770/L775/L770D/L775D Es ist u. U. nicht möglich, eine Netzwerkverbindung zu einem bestimmten Netzwerk mithilfe der Adhoc-Netzwerkfunktion herzustellen. In diesem Fall muss das neue Netzwerk(*) für alle Computer konfiguriert werden, die mit demselben Netzwerk verbunden sind, um Netzwerkverbindungen wieder zu aktivieren. * Bitte verwenden Sie den neuen Netzwerknamen.
C670/C670D/L770/L775/L770D/L775D Sicherheit TOSHIBA empfiehlt dringend, die Verschlüsselungsfunktion zu aktivieren, andernfalls ist Ihr Computer nicht vor unberechtigten Zugriffen über das Wireless LAN geschützt. Wenn dies geschieht, können Unbefugte in Ihr System eindringen, Sie „belauschen“, Daten stehlen oder Daten zerstören. TOSHIBA ist nicht haftbar für Datenverluste und Schäden aufgrund von Datenspionage oder unberechtigtem Zugriff mithilfe der Wireless LAN-Funktion.
C670/C670D/L770/L775/L770D/L775D Die Reichweite wird auch durch Hindernisse auf dem Signalweg beeinträchtigt, die das Funksignal absorbieren oder reflektieren können. Bluetooth-Drahtlostechnologie Einige Computer in dieser Serie bieten drahtlose BluetoothKommunikation, die Kabel zwischen elektronischen Geräten wie Computern, Druckern und Mobiltelefonen überflüssig macht.
C670/C670D/L770/L775/L770D/L775D Dieser Bluetooth Stack basiert je nach Modell auf der BluetoothSpezifikation Version 1.1/1.2/2.0+EDR/2.1+EDR/3.0/3.0+HS. TOSHIBA kann die Kompatibilität zwischen PC-Produkten und/oder anderen elektronischen Geräten mit Bluetooth®-Technologie nicht garantieren, wenn es sich nicht um Notebooks von TOSHIBA handelt. Versionshinweise für Bluetooth Stack for Windows by TOSHIBA 1. 2. Fax-Software:Einige Fax-Anwendungen können Sie mit diesem Bluetooth™ Stack nicht verwenden.
C670/C670D/L770/L775/L770D/L775D LAN-Kabeltypen Vor dem Anschluss an ein LAN muss der Computer entsprechend konfiguriert werden. Wenn Sie sich mit den Standardeinstellungen des Computers an ein LAN anmelden, kann es bei LAN-Vorgängen zu Fehlern kommen. Fragen Sie Ihren LAN-Administrator nach den korrekten Einstellungen und Verfahren. Wenn Sie ein Gigabit Ethernet-LAN (1000 Mbit/s, 1000BASE-T) benutzen, müssen Sie Kabel der Kategorie CAT5E oder höher verwenden.
C670/C670D/L770/L775/L770D/L775D 2. Stecken Sie ein Ende des Kabels in die LAN-Buchse des Computers. Drücken Sie den Stecker vorsichtig fest, bis die Lasche hörbar einrastet. Abbildung 3-8 LAN-Kabel anschließen (L770/L775/L770D/L775D) 1 2 1. LAN-Buchse 3. 2. LAN-Kabel Stecken Sie das andere Ende des Kabels in den LAN-Hub-Anschluss oder Router. Sprechen Sie mit Ihrem LAN-Administrator und Ihrem Hardware- oder Software-Händler, bevor Sie eine Netzwerkverbindung konfigurieren.
C670/C670D/L770/L775/L770D/L775D Achten Sie darauf, dass keine Fremdkörper in den Speichermediensteckplatz gelangen. Achten Sie darauf, dass keine Gegenstände aus Metall, wie z.B. Heft- oder Büroklammern, in das Innere des Computers oder der Tastatur gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt und ein Feuer ausbrechen könnte. Beachten Sie, dass für die Verwendung von miniSD/microSD-Karten ein Adapter erforderlich ist.
C670/C670D/L770/L775/L770D/L775D SD-, SDHC- und SDXC-Speicherkarten sehen auf den ersten Blick identisch aus. Das Logo auf Speicherkarten unterscheidet sich jedoch, deshalb sollten Sie beim Kauf besonders auf das Logo achten. Das Logo von SD-Speicherkarten: . Das Logo von SDHC-Speicherkarten: Das Logo von SDHC-Speicherkarten: . TM . SD-Speicherkarten haben eine maximale Kapazität von 2 GB. SDHCSpeicherkarten haben eine maximale Kapazität von 32 GB.
C670/C670D/L770/L775/L770D/L775D Berühren Sie nicht den metallenen Bereich der Karte und vermeiden Sie, dass er feucht oder schmutzig wird. Legen Sie Karten in ihre Box zurück, wenn Sie sie nicht mehr benötigen. Die Karte kann nur in einer Richtung eingesetzt werden. Versuchen Sie nicht, die Karte falsch herum in den Steckplatz zu drücken. Eine Karte muss immer vollständig in den Steckplatz eingesetzt werden. Drücken Sie auf die Karte, bis Sie ein Klicken hören.
C670/C670D/L770/L775/L770D/L775D Abbildung 3-10 Speichermedien einsetzen (L770/L775/L770D/L775D) 1 2 1. Speichermediensteckplatz 2. Speichermedium Achten Sie darauf, das Speichermedium richtig herum einzusetzen. Wenn Sie das Speichermedium falsch herum einsetzen, können Sie es möglicherweise nicht wieder entfernen. Achten Sie beim Einsetzen von Speichermedien darauf, die metallenen Kontakte nicht zu berühren.
C670/C670D/L770/L775/L770D/L775D Zusätzliche Speichermodule Sie können zusätzlichen Speicher im Computer installieren, um den verfügbaren Systemspeicher zu erhöhen. In diesem Abschnitt wird beschrieben, wie Sie optionale Speichermodule installieren und entfernen. Legen Sie ein Tuch unter den Computer, um zu verhindern, dass die Außenseite des Bildschirms verkratzt wird, wenn Sie den Speicher auswechseln. Verwenden Sie kein Tuch, das statische Elektrizität erzeugt.
C670/C670D/L770/L775/L770D/L775D 2. 3. 4. 5. Entfernen Sie den Netzadapter und alle an den Computer angeschlossenen Kabel und Peripheriegeräte. Schließen Sie den Bildschirm. Legen Sie den Computer mit der Unterseite nach oben hin und nehmen Sie den Akku heraus (siehe Abschnitt Ersetzen des Akkus in Kapitel 5 „Stromversorgung und Startmodi“). Lösen Sie die Schraube, die die Abdeckung des Speichermodulsockels sichert. Die Schraube ist an der Abdeckung befestigt, damit sie nicht verloren geht.
C670/C670D/L770/L775/L770D/L775D 7. Richten Sie die Kerbe am Speichermodul mit der am Sockel aus und setzen Sie das Modul vorsichtig in einem 30-Grad-Winkel in den Sockel, bevor Sie es nach unten drücken, bis die seitlichen Laschen einrasten. Abbildung 3-12 Speichermodul einsetzen (L770/L775/L770D/L775D) 1 2 3 1. Nut 2. Sockel B 3. Sockel A Achten Sie darauf, dass keine Gegenstände aus Metall, wie z. B. Heftoder Büroklammern, in das Innere des Computers gelangen.
C670/C670D/L770/L775/L770D/L775D 8. Setzen Sie die Speichermodul-Abdeckung ein und sichern Sie sie mit der Schraube. Achten Sie darauf, dass die Speichermodul-Abdeckung fest geschlossen ist. Abbildung 3-13 Speichermodulabdeckung einsetzen (L770/L775/L770D/ L775D) 2 1 1. Schraube 2. Speichermodulabdeckung 9. Einsetzen des Akkus – Nähere Informationen finden Sie im Abschnitt Ersetzen des Akkus in Kapitel 5, Stromversorgung und Startmodi. 10. Drehen Sie den Computer um. 11.
C670/C670D/L770/L775/L770D/L775D 8. Fassen Sie das Modul an den Kanten und nehmen Sie es aus dem Computer. Nach längerer Verwendung des Computers werden die Speichermodule und die Schaltkreise neben den Speichermodulen sehr warm. Lassen Sie die Speichermodule auf Zimmertemperatur abkühlen, bevor Sie sie ersetzen. Andernfalls können Sie sich leichte Verbrennungen zuziehen. Berühren Sie die Anschlüsse des Speichermoduls oder des Computers nicht.
C670/C670D/L770/L775/L770D/L775D Abbildung 3-15 Monitorkabel an den Anschluss für einen externen RGBMonitor anschließen (L770/L775/L770D/L775D) 1 2 1. Anschluss für einen externen RGB- 2. Monitorkabel Monitor Am Anschluss für einen externen RGB-Monitor am Computer befinden sich keine Gewindebuchsen zur Verschraubung des Monitorkabels. Kabel von externen Monitoren, die über Befestigungsschrauben verfügen, können jedoch trotzdem verwendet werden. 2. Schalten Sie den externen Monitor ein.
C670/C670D/L770/L775/L770D/L775D Da die Funktionsfähigkeit des HDMI-Anschlusses nicht mit allen Monitoren getestet werden konnte, können einige HDMI-Monitore möglicherweise nicht verwendet werden. (HDMI=High-Definition Multimedia Interface) Verbindung mit dem HDMI-Ausgang 1. Stecken Sie ein Ende des HDMI-Kabels in den HDMI-Ausgang des HDMI-Geräts. Stecken Sie das andere Ende des HDMI-Kabels in den HDMIAnschluss des Computers. 2.
C670/C670D/L770/L775/L770D/L775D Wenn Sie das Anzeigegerät mit der Tastenkombination Fn + F5 ändern, wird das Wiedergabegerät möglicherweise nicht automatisch gewechselt. Um in diesem Fall das Wiedergabegerät auf dasselbe Gerät wie das Anzeigegerät einzustellen, gehen Sie folgendermaßen vor: a. Klicken Sie auf Start -> Systemsteuerung -> Hardware und Sound -> Sound. b. Wählen Sie auf der Registerkarte Wiedergabe das Wiedergabegerät, zu dem Sie wechseln möchten. c.
C670/C670D/L770/L775/L770D/L775D Anzeigemodi unter „Alle Modi auflisten“ HD-Format 1920 mal 1080, True Color (32 Bit), 60 Hertz 1080p 1920 mal 1080, True Color (32 Bit), 30 Hertz (Interlaced) 1080i 1280 mal 720, True Color (32 Bit), 60 Hertz 720p 720 mal 576, True Color (32 Bit), 50 Hertz 576p 720 mal 480, True Color (32 Bit), 60 Hertz 480p Der oben angegebene Anzeigemodus ist der normale HDMIAnzeigemodus. Die auswählbaren Anzeigemodi unterscheiden sich je nach HDMI-Monitor. HDMI 1.
C670/C670D/L770/L775/L770D/L775D 7. 8. 9. 10. 11. 12. 13. 14. Wenn der Bildschirm „Test your hardware setup“ (Hardwaresetup testen) angezeigt wird, setzen Sie die Brille auf, schließen Sie abwechselnd ein Auge und wählen Sie das Bild aus, das Sie sehen. Klicken Sie auf Next (Weiter). (Wenn der Bildschirm „Hardware test failed“ angezeigt wird, unterstützt Ihr Fernsehgerät die HDMI 1.4 3D Video-Funktion nicht. Klicken Sie auf „Exit“ und beenden Sie das Setup.
C670/C670D/L770/L775/L770D/L775D Befestigen des Sicherheitsschlosses So befestigen Sie ein Sicherherheitsseil am Computer: 1. 2. Drehen Sie den Computer so, dass Ihnen die rechte Seite zugewandt ist. Richten Sie das Sicherheitsseil an dem dafür vorgesehenen Schlitz aus und befestigen Sie es. Abbildung 3-17 Sicherheitsschloss (L770/L775/L770D/L775D) 1 2 1.
C670/C670D/L770/L775/L770D/L775D Um das Dienstprogramm Volume Mixer zu starten, klicken Sie mit der rechten Maustaste auf das Lautsprechersymbol in der Taskleiste und wählen Sie Volume Mixer öffnen aus dem Menü. Verschieben Sie den Schieberegler Lautsprecher, um die Lautstärke der Lautsprecher oder des Kopfhörers zu regeln. Um die Lautstärke einer Anwendung zu regeln, verschieben Sie den Schieberegler für diese Anwendung.
C670/C670D/L770/L775/L770D/L775D Energieverwaltung Der Audio-Controller im Computer kann ausgeschaltet werden, wenn die Audiofunktion nicht aktiv ist. Klicken Sie auf die Schaltfläche Energieverwaltung , um die Konfiguration der Audio-Energieverwaltung zu ändern. Wenn die Audio-Energieverwaltung aktiviert ist, wird die Kreisschaltfläche links oben in der Energieverwaltung blau und konvex angezeigt. Wenn die Schaltfläche schwarz und konkav angezeigt wird, ist die Audio-Energieverwaltung deaktiviert.
C670/C670D/L770/L775/L770D/L775D Anzeigemodus Die Einstellungen für den Anzeigemodus werden im Dialogfeld Bildschirmauflösung festgelegt. Um das Dialogfeld Bildschirmauflösung zu öffnen, klicken Sie auf Start > Systemsteuerung -> Darstellung und Personalisierung -> Anzeige -> Anzeigeeinstellungen ändern. Beim Ausführen bestimmter Anwendungen (zum Beispiel 3DAnwendungen und Filmwiedergabe) kann es zu Störungen, Flimmern oder Bildauslassungen kommen. In diesem Fall ändern Sie die Auflösung des Bildschirms.
C670/C670D/L770/L775/L770D/L775D Stellen Sie vor dem Transport sicher, dass der Computer nicht mehr auf die Laufwerke zugreift. Überprüfen Sie dies anhand der Anzeigen an der Vorderseite des Computers. Schalten Sie den Computer aus. Trennen Sie den Netzadapter und alle Peripheriegeräte vom Computer ab. Schließen Sie den Bildschirm. Heben Sie den Computer nicht am Bildschirm hoch.
C670/C670D/L770/L775/L770D/L775D Kapitel 4 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zum Betrieb der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder README.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Accessibili- Das TOSHIBA Accessibility Utility unterstützt ty Benutzer mit eingeschränkten Bewegungsmöglichkeiten bei der Verwendung der TOSHIBA Hotkey-Funktionen. Mit diesem Dienstprogramm können Sie einstellen, dass die Taste Fn nach einmaligem Drücken einrastet. Tastenkombinationen können dann als Tastenfolge eingegeben werden, d. h. Sie können Fn loslassen und dann eine der Funktionstasten (F1 ... F12) drücken.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Assist TOSHIBA Assist ist eine grafische Benutzeroberfläche für den schnellen Zugriff auf spezifische Tools, Utilitys und Anwendungen, die die Verwendung und Konfiguration des Computers erleichtern. Um dieses Utility zu starten, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Utilitys -> TOSHIBA Assist.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Disc Creator Sie können CDs und DVDs in verschiedenen Formaten erstellen, darunter auch Audio-CDs, die auf einem Standard-CD-Player abgespielt werden können, sowie Daten-CDs/DVDs, auf denen Sie Kopien der Dateien und Ordner von der Festplatte speichern können. Um dieses Utility aufzurufen, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> CD&DVD-Anwendungen -> Disc Creator.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Bulletin Board Bulletin Board ist ein praktischer Ort, um Dinge anzupinnen und auf unterhaltsame und kreative Weise visuell zu organisieren. Ziehen Sie einfach Ihre Lieblingsbilder, -dateien oder -notizen auf das Board, um sie dort anzupinnen. Auf diese Weise können Sie Thumbnail-Verknüpfungen, Erinnerungen, ToDo-Listen usw. erstellen. Um dieses Utility aufzurufen, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> TOSHIBA Bulletin Board.
C670/C670D/L770/L775/L770D/L775D TOSHIBA Resolution+ Mit diesem Plug-In können Sie WMV- und MP4Plug-in For Windows Videos mit Windows Media Player konvertieren. Media Player Weitere Informationen finden Sie in der Hilfe zum TOSHIBA Resolution+ Plug-in for Windows Media Player. Klicken Sie dazu auf Start -> Alle Programme > TOSHIBA -> TOSHIBA Resolution+ Plug-in for Windows Media Player -> TOSHIBA Resolution+ Plug-in for Windows Media Player Help.
C670/C670D/L770/L775/L770D/L775D Einschaltpasswort Es stehen zwei Stufen des Passwortschutzes zur Verfügung, um den unbefugten Zugriff auf den Computer zu verhindern: das Supervisor- und das Benutzerpasswort. Sofortsperre Eine besondere Hotkey-Funktion sperrt das System automatisch und schützt so Ihre Daten.
C670/C670D/L770/L775/L770D/L775D Energiesparmodus Wenn Sie Ihre Arbeit unterbrechen müssen, können Sie diese Funktion verwenden, um den Computer auszuschalten, ohne die Software zu beenden. Die Daten werden im Hauptspeicher des Computers aufrechterhalten, sodass Sie beim nächsten Einschalten dort mit Ihrer Arbeit fortfahren können, wo Sie sie unterbrochen haben.
C670/C670D/L770/L775/L770D/L775D Schlaf- und Ladefunktion Ihr Computer kann den USB-Anschluss auch dann mit USB Bus Power (DC 5 V) versorgen, wenn der Computer ausgeschaltet ist. Der Begriff „ausgeschaltet“ schließt den Energiesparmodus, den Ruhezustand und den vollständig ausgeschalteten Zustand ein. Diese Funktion kann für Anschlüsse verwendet werden, die die Schlaf- und Ladefunktion unterstützen (im Folgenden „kompatible Anschlüsse“ genannt).
C670/C670D/L770/L775/L770D/L775D Wenn die Schlaf- und Ladefunktion aktiviert ist, kann die USBReaktivierungsfunktion für kompatible Anschlüsse nicht verwendet werden. Schließen Sie in diesem Fall die Maus oder die Tastatur an einen USB-Anschluss an, der nicht mit dem Kompatibilitätssymbol für die Schlaf- und Ladefunktion ( ) gekennzeichnet ist. Wenn alle USBAnschlüsse mit dem Kompatibilitätssymbol ( ) gekennzeichnet sind, deaktivieren Sie die Schlaf- und Ladefunktion.
C670/C670D/L770/L775/L770D/L775D Akkueinstellungen Mit diesem Utility können Sie die untere Grenze der verbleibenden Akkuenergie für die Schlaf- und Ladefunktion festlegen. Bewegen Sie den Schieberegler, um die untere Grenze zu verschieben. Wenn die verbleibende Akkubetriebszeit unter den Grenzwert fällt, wird die Schlafund Ladefunktion beendet.
C670/C670D/L770/L775/L770D/L775D aus der Verwendung der Technologie oder Software für die Gesichtserkennung ergeben. TOSHIBA SOWIE IHRE PARTNER UND ZULIEFERER SIND NICHT VERANTWORTLICH FÜR SCHÄDEN ODER VERLUSTE AN BZW. VON GEWINNEN, EINNAHMEN, PROGRAMMEN, DATEN ODER WECHSELSPEICHERMEDIEN, DIE SICH AUS DER VERWENDUNG DES PRODUKTS ERGEBEN, SELBST WENN TOSHIBA ÜBER DIESE MÖGLICHEN SCHÄDEN ODER VERLUSTE INFORMIERT WURDE.
C670/C670D/L770/L775/L770D/L775D 6. Die Aufzeichnung endet, nachdem Sie Ihren Nacken mehrmals nach links, rechts, oben und unten bewegt haben. Wenn die Registrierung erfolgreich ist, wird die folgende Meldung auf dem Bildschirm angezeigt: „Registrierung abgeschlossen. Die Daten werden jetzt getestet. Click the Next button.“ 7. Klicken Sie auf die Schaltfläche Next, um den Verifizierungstest durchzuführen. Führen Sie den Verifizierungstest durch. Blicken Sie auf den Bildschirm wie bei der Registrierung.
C670/C670D/L770/L775/L770D/L775D Windows Anmeldung über TOSHIBA Face Recognition Dieser Abschnitt erklärt, wie Sie sich mit TOSHIBA Face Recognition bei Windows anmelden. Es gibt zwei Authentifizierungsmethoden. Anmeldebildschirm im 1:N-Modus: Wenn die Gesichtserkennungskachel standardmäßig ausgewählt ist, können Sie sich ohne Verwendung von Tastatur und Maus anmelden.
C670/C670D/L770/L775/L770D/L775D Passwort-Utility Mit dem Passwort-Utility können Sie eine zusätzliche Sicherheitsstufe einrichten. Damit stehen zwei Kennwortstufen zur Verfügung: Benutzer und Supervisor. Im TOSHIBA Passwort-Dienstprogramm eingerichtete Passwörter unterscheiden sich vom Windows-Kennwort.
C670/C670D/L770/L775/L770D/L775D Passwort eingeben [ ] 2. Zu diesem Zeitpunkt funktionieren die Hotkeys FN + F1 bis F9 nicht. Sie können erst nach der Eingabe des Passworts verwendet werden. 3. 4. Geben Sie das Passwort ein. Drücken Sie ENTER. Wenn Sie dreimal hintereinander ein falsches Passwort eingeben, schaltet sich der Computer ab. Schalten Sie ihn dann wieder ein und versuchen Sie es erneut.
C670/C670D/L770/L775/L770D/L775D Setup In diesem Feld wird die installierte BIOS-Version, das Datum und die ECVersion angezeigt. Kennwort Mit dieser Option können Sie das Benutzerpasswort zum Einschalten festlegen oder löschen. Benutzerpasswort Für die Einrichtung eines neuen Passworts oder Änderung/Entfernung eines vorhandenen Passworts. Nicht eingetragen Ändert oder entfernt das Passwort. (Standard) Registriert Wählt das Kennwort aus.
C670/C670D/L770/L775/L770D/L775D Benutzerzeichenfolge In dieses leere Feld können Sie einen Hinweistext eingeben, der bei der Abfrage des Passwortes mit angezeigt wird. Wenn kein Passwort eingerichtet wird, wird die Meldung nicht angezeigt. Anzeige Auf dieser Registerkarte können Sie den internen Bildschirm oder einen externen Monitor als aktives Anzeigegerät auswählen.
C670/C670D/L770/L775/L770D/L775D Die oben beschriebenen Methoden zur Auswahl des Bootgeräts haben keinen Einfluss auf die Einstellungen für die Bootreihenfolge, die in HW Setup festgelegt wurden. Wenn Sie eine andere Taste als die oben aufgeführten drücken oder wenn das gewählte Gerät nicht installiert ist, verwendet das System das im HW Setup spezifizierte Laufwerk zum Booten (nach Verfügbarkeit). Bootgeschwindigkeit Mit dieser Option können Sie die Startgeschwindigkeit des Systems steuern.
C670/C670D/L770/L775/L770D/L775D LAN Reaktivierung durch LAN Mit dieser Funktion kann der Computer eingeschaltet werden, wenn ein Reaktivierungspaket (Magic Packet) vom LAN empfangen wird. Installieren oder entfernen Sie keine Speichermodule, während Wakeup-on LAN (Reaktivierung durch Wireless LAN) aktiviert ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen Sie deshalb den Netzadapter angeschlossen, wenn Sie diese Funktion verwenden möchten.
C670/C670D/L770/L775/L770D/L775D USB Legacy-USB-Unterstützung Mit dieser Option aktivieren oder deaktivieren Sie die USB Legacy Emulation. Wenn das Betriebssystem USB nicht unterstützt, können Sie dennoch eine USB-Maus und eine USB-Tastatur verwenden, indem Sie die Option Legacy USB Support aktivieren. Aktiviert Aktiviert die USB Legacy Emulation für das Diskettenlaufwerk. (Standardeinstellung) Deaktiviert Deaktiviert die USB Legacy Emulation.
C670/C670D/L770/L775/L770D/L775D Informationen sind auch hilfreich bei der Diagnose von Problemen, falls der Computer von Toshiba oder einem autorisierten Service-Partner von Toshiba repariert werden muss. Toshiba kann diese Informationen auch zur Analyse bei der Qualitätssicherung verwenden. Im Rahmen der oben genannten Einschränkungen können die auf der Festplatte gespeicherten Daten an Einrichtungen außerhalb Ihres Landes oder Gebietes (z. B. EU) übermittelt werden.
C670/C670D/L770/L775/L770D/L775D Systemwiederherstellung Es gibt eine versteckte Partition für die Systemwiederherstellungsoptionen auf der Festplatte. Sie können auch ein Wiederherstellungsmedium erstellen und das System wiederherstellen.
C670/C670D/L770/L775/L770D/L775D Schließen Sie den Netzadapter an, wenn Sie Wiederherstellungsmedien erstellen. Schließen Sie alle Softwareprogramme mit Ausnahme von Recovery Media Creator. Deaktivieren Sie Programme (zum Beispiel Bildschirmschoner), die die CPU stark beanspruchen. Betreiben Sie den Computer mit voller Leistung. Verwenden Sie keine Energiesparfunktionen. Beschreiben Sie keine Medien, während ein Antivirenprogramm ausgeführt wird.
C670/C670D/L770/L775/L770D/L775D 5. Nachdem Recovery Media Creator gestartet wurde, wählen Sie den Medientyp sowie den zu kopierenden Titel aus und klicken auf die Schaltfläche Erstellen.
C670/C670D/L770/L775/L770D/L775D Wenn Sie sich zuvor entschieden haben, die Wiederherstellungspartition zu entfernen und versuchen, ein Wiederherstellungsmedium zu erstellen, wird die folgende Meldung angezeigt: „The Recovery Media Creator can not be launched because there is no recovery partition.“ (Recovery Media Creator kann nicht gestartet werden, da keine Wiederherstellungspartition vorhanden ist).
C670/C670D/L770/L775/L770D/L775D 2. 3. 4. 5. 6. 7. Schalten Sie den Computer ein. Wenn der TOSHIBA-Bildschirm angezeigt wird, drücken Sie wiederholt auf die Taste F8. Das Menü Erweiterte Boot-Optionen wird angezeigt. Wählen Sie mithilfe der Pfeiltasten die Option Computer reparieren und drücken Sie ENTER. Wählen Sie Ihr bevorzugtes Tastatur-Layout und klicken Sie auf Next (Weiter). Damit Sie Zugriff auf den Wiederherstellungsprozess haben, melden Sie sich als Benutzer mit ausreichenden Berechtigungen an.
C670/C670D/L770/L775/L770D/L775D Kapitel 5 Stromversorgung und Startmodi Zu den Energieressourcen des Computers gehören der Netzadapter, der Akku und interne Batterien. In diesem Kapitel wird erläutert, wie Sie welche Energieressourcen am effektivsten nutzen und die Akkus laden und auswechseln. Darüber hinaus erhalten Sie hier Tipps zum Sparen von Akkuenergie und Informationen zu den verschiedenen Startmodi.
C670/C670D/L770/L775/L770D/L775D Computer eingeschaltet Computer ausgeschaltet (kein Betrieb) Kein Netzadapter angeschlo ssen Verbleibende • Computer in Betrieb Ladung des • LED: aus Akkus liegt über dem Schwellenwert Verbleibende • Computer in Betrieb Ladung des • LED: blinkt gelb Akkus liegt unter dem Schwellenwert Akku ist leer Computer schaltet sich ab Kein Akku installiert • Computer außer Betrieb • LED: aus Stromversorgungsbedingungen für den L770/ L775/L770D/L775D Die Einsatzfähigkeit des Com
C670/C670D/L770/L775/L770D/L775D Computer eingeschaltet Computer ausgeschaltet (kein Betrieb) Netzadapter Akku vollständig angeschlos aufgeladen sen • Computer in Betrieb • Kein Aufladen • Kein Aufladen Akku weiß • LED: DC IN weiß • LED: Akku weiß DC IN weiß Akku teilweise oder vollständig entladen • Computer in Betrieb • Schnelles Aufladen • Aufladen • LED: • LED: Akku gelb Akku gelb DC IN weiß DC IN weiß Kein Akku installiert • Computer in Betrieb • Kein Aufladen • Kein Aufladen Ak
C670/C670D/L770/L775/L770D/L775D Computer eingeschaltet Computer ausgeschaltet (kein Betrieb) Kein Netzadapter angeschlos sen Verbleibende Ladung des Akkus liegt über dem Schwellenwert • Computer in Betrieb • LED: Akku gelb DC IN aus Verbleibende Ladung des Akkus liegt unter dem Schwellenwert • Computer in Betrieb • LED: Akku blinkt gelb DC IN aus Akku ist leer Computer schaltet sich ab Kein Akku installiert • Computer außer Betrieb • LED: Akku aus DC IN aus Überwachen der Stromversorgungsbeding
C670/C670D/L770/L775/L770D/L775D Gelb blinkend Die Akkuladung ist gering. Der Netzadapter muss angeschlossen werden, um den Akku wieder aufzuladen. Es kann auch ein Problem mit der Stromversorgung vorliegen. Sie sollten zuerst versuchen, den Netzadapter an eine andere Steckdose anzuschließen. Funktioniert er immer noch nicht richtig, wenden Sie sich an Ihren Wiederverkäufer oder Fachhändler. Gelb Der Netzadapter ist angeschlossen und der Akku wird aufgeladen.
C670/C670D/L770/L775/L770D/L775D Akkuanzeige Anhand der LED Akku lässt sich der Ladezustand des Akkus überprüfen. Die LED zeigt den Akkuzustand wie folgt an: Gelb blinkend Die Akkuladung ist gering. Der Netzadapter muss angeschlossen werden, um den Akku wieder aufzuladen. Gelb Der Netzadapter ist angeschlossen und der Akku wird aufgeladen. Weiß Der Netzadapter ist angeschlossen und der Akku ist vollständig aufgeladen. Leuchtet nicht Unter allen sonstigen Bedingungen leuchtet die Anzeige nicht.
C670/C670D/L770/L775/L770D/L775D Akku In diesem Abschnitt werden die Akkutypen und ihre Verwendung sowie die Auflademethoden beschrieben. Akkutypen Der Computer verfügt über verschiedene Akkus. Akku Der auswechselbare Lithium-Ionen-Akku, in diesem Handbuch kurz als Akku bezeichnet, ist die Hauptstromquelle des Computers, wenn der Netzadapter nicht angeschlossen ist. Für den längeren netzunabhängigen Einsatz des Computers können zusätzliche Akkus erworben werden.
C670/C670D/L770/L775/L770D/L775D Vergewissern Sie sich vor dem Aufladen des Akkus immer, dass dieser korrekt im Computer eingesetzt ist. Bei falscher Installation des Akkus kann es zu Rauch- oder Feuerentwicklung kommen, oder der Akku kann bersten. Bewahren Sie Akkus außerhalb der Reichweite von Kindern auf. Er kann Verletzungen verursachen. Der Lithium-Ionen-Akku kann bei unsachgemäßer Handhabung explodieren. Erkundigen Sie sich bei den zuständigen Behörden, wie Sie diese Batterien entsorgen müssen.
C670/C670D/L770/L775/L770D/L775D Steckdose. Die LED DC IN/Akku bzw. Akku leuchtet gelb, während der Akku aufgeladen wird. Verwenden Sie zum Laden des Akkus nur den an das Stromnetz angeschlossenen Computer oder das optional erhältliche Akkuladegerät von TOSHIBA. Laden Sie den Akku nicht mit einem anderen Gerät auf.
C670/C670D/L770/L775/L770D/L775D Warten Sie nach dem Einschalten des Computers mindestens 16 Sekunden, bevor Sie versuchen, die verbleibende Akkubetriebszeit anzuzeigen. Der Computer benötigt diese Zeitspanne, um die verbleibende Kapazität zu überprüfen und die verbleibende Betriebszeit basierend darauf und aufgrund des aktuellen Energieverbrauchs zu berechnen. Die tatsächliche verbleibende Betriebszeit kann leicht von der berechneten Zeit abweichen.
C670/C670D/L770/L775/L770D/L775D Trennen Sie den Computer mindestens einmal im Monat von der Steckdose und lassen Sie ihn im Akkubetrieb laufen, bis der Akku vollständig entladen ist. Führen Sie zuvor die folgenden Schritte aus: 1. Schalten Sie den Computer aus. 2. Ziehen Sie den Netzadapter ab und schalten Sie den Computer ein. Lässt sich das Gerät nicht einschalten, fahren Sie mit Schritt 4 fort. 3. Verwenden Sie den Computer fünf Minuten lang im Akkubetrieb.
C670/C670D/L770/L775/L770D/L775D Im Ruhezustand gehen die Daten verloren, wenn Sie den Akku entfernen oder den Netzadapter abtrennen, bevor der Speichervorgang abgeschlossen ist. Warten Sie, bis die LED Festplatte/Optisches Laufwerk erlischt. Berühren Sie nicht den Akkufreigabehebel, während Sie den Computer halten. Sie könnten den Akku versehentlich entriegeln und sich durch den herausfallenden Akku verletzen. Entfernen des Akkus Gehen Sie wie unten beschrieben vor, um einen entladenen Akku zu entfernen.
C670/C670D/L770/L775/L770D/L775D Startmodi Der Computer verfügt über drei verschiedene Startmodi: Beenden-Modus: Der Computer wird ausgeschaltet, ohne Daten zu speichern. Sie müssen Ihre Arbeit immer speichern, bevor Sie den Computer ausschalten. Ruhezustand: Die Daten im Arbeitsspeichers werden auf der Festplatte gespeichert. Energiesparmodus: Die Daten bleiben im Arbeitsspeicher erhalten.
C670/C670D/L770/L775/L770D/L775D Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Jeder Benutzer sollte sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden.
C670/C670D/L770/L775/L770D/L775D Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert sind und das alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen.
C670/C670D/L770/L775/L770D/L775D Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Falls Sie ein Softwarepaket nicht laden können, kann der Datenträger beschädigt oder das Programm fehlerhaft sein. Versuchen Sie, eine andere Kopie der Software zu laden. Wird bei Verwendung eines Softwarepakets eine Fehlermeldung ausgegeben, schlagen Sie in der mitgelieferten Dokumentation nach.
C670/C670D/L770/L775/L770D/L775D 3. 4. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen. Andernfalls fahren Sie mit dem nächsten Schritt fort. Schließen Sie alle noch geöffneten Programme, indem Sie sie nacheinander auswählen und jeweils auf Task beenden klicken. Nachdem Sie alle Programme geschlossen haben, sollten Sie Ihre Arbeit fortsetzen können.
C670/C670D/L770/L775/L770D/L775D Netzstrom Wenn sich der Computer bei angeschlossenem Netzadapter nicht einschalten lässt, überprüfen Sie den Status der LED DC IN/Akku. Weitere Informationen finden Sie in Kapitel 5, Stromversorgung und Startmodi. Problem Vorgehensweise Netzadapter versorgt Überprüfen Sie die Anschlüsse, um den Computer nicht sicherzustellen, dass das Netzkabel/der mit Strom Netzadapter fest an den Computer und eine stromführende Steckdose angeschlossen ist.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Akku wird nicht aufgeladen, wenn der Netzadapter angeschlossen ist (LED Akku bzw. DC IN/Akku leuchtet nicht gelb). Ist der Akku vollständig entladen, lädt er sich nicht sofort wieder auf. Warten Sie einige Minuten, bis Sie es erneut versuchen. Wenn Sie den Akku immer noch nicht laden können, prüfen Sie, ob die Steckdose des Netzadapters Strom liefert. Schließen Sie dazu ein anderes Gerät daran an.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Akku versorgt den Computer nicht so lange mit Strom wie erwartet Wenn Sie häufig einen erst teilweise entladenen Akku wiederaufladen, wird der Akku möglicherweise nicht bis zu seiner vollen Kapazität aufgeladen. Warten Sie in solchen Fällen, bis der Akku vollständig entladen ist und versuchen Sie erneut, ihn aufzuladen. Überprüfen Sie die Power Saver-Einstellungen unter Energieplan auswählen in den Energieoptionen.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Auf dem Bildschirm erscheinen die falschen Zeichen. Sehen Sie in der Softwaredokumentation nach und überprüfen Sie, dass keine Tastaturneubelegung erfolgt (eine Neubelegung umfasst die Änderung oder Neuzuweisung der Funktion der einzelnen Tasten). Lässt sich die Tastatur immer noch nicht verwenden, wenden Sie sich an den TOSHIBASupport.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Computer ist sehr langsam Die Dateien auf dem Festplattenlaufwerk sind möglicherweise fragmentiert. Führen Sie das Defragmentierungsprogramm aus, um den Zustand der Dateien und des Festplattenlaufwerks zu überprüfen. In der Dokumentation zum Betriebssystem oder in der Online-Hilfedatei finden Sie nähere Informationen zur Ausführung und Verwendung des Defragmentierungsprogramms.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Speichermedienfehler Nehmen Sie das Speichermedium aus dem Computer und stecken Sie es wieder hinein, um zu gewährleisten, dass es richtig angeschlossen ist. Falls das Problem immer noch besteht, sollten Sie in der mit dem Speichermedium mitgelieferten Dokumentation nachschlagen. Schreiben auf Speichermedium ist nicht möglich Nehmen Sie das Speichermedium aus dem Computer und überprüfen Sie, ob es einen Schreibschutz hat.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Doppeltippen funktioniert nicht. Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3. Um dieses Utility aufzurufen, klicken Sie auf Start -> Systemsteuerung -> Hardware und Sound -> Maus. Klicken Sie im Fenster „Eigenschaften von Maus“ auf die Registerkarte Tasten. Stellen Sie die Doppelklickgeschwindigkeit ein und klicken Sie auf OK.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3. Um dieses Utility aufzurufen, klicken Sie auf Start -> Systemsteuerung -> Hardware und Sound -> Maus. Klicken Sie im Fenster „Eigenschaften von Maus“ auf die Registerkarte Tasten. Stellen Sie die Doppelklickgeschwindigkeit ein und klicken Sie auf OK.
C670/C670D/L770/L775/L770D/L775D Schlaf- und Ladefunktion Weitere Informationen finden Sie unter Verwenden des TOSHIBA SchlafDienstprogramms in Kapitel 4, „Utilitys und erweiterte Verwendung“. Problem Vorgehensweise Schlaf- und Ladefunktion kann nicht verwendet werden Möglicherweise ist die Schlaf- und Ladefunktion deaktiviert. Markieren Sie das Kontrollkästchen „Schlaf- und Lademodus aktivieren“ im TOSHIBA SchlafDienstprogramm.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht. Einige externe Geräte funktionieren möglicherweise nicht, wenn sie an einen kompatiblen Anschluss angeschlossen sind, während die Schlaf- und Ladefunktion aktiviert ist. Schließen Sie das externe Gerät erneut an, nachdem Sie den Computer eingeschaltet haben.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Es wird kein Ton ausgegeben. Ändern Sie die Lautstärke. Um die Lautstärke zu erhöhen, drücken Sie FN + 4, um sie zu verringern, drücken Sie FN + 3. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Mute-Funktion (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit den Hotkeys FN + F5 das aktive Anzeigegerät, sodass nicht das interne LCD verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
C670/C670D/L770/L775/L770D/L775D Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen sich die Probleme nicht beheben, wenden Sie sich an den LAN-Administrator. Wireless LAN Wenn Sie den LAN-Zugriff mit den folgenden Schritten nicht herstellen können, wenden Sie sich an Ihren LAN-Administrator.
C670/C670D/L770/L775/L770D/L775D Bevor Sie anrufen Da die Probleme vom Betriebssystem oder von der Software, die Sie verwenden, verursacht werden können, sollten Sie zuerst andere Hilfequellen konsultieren. Bevor Sie sich an TOSHIBA wenden, sollten Sie Folgendes versuchen: Sehen Sie sich die Abschnitte zur Fehlerbehebung in den Dokumentationen zu Ihrer Software und zu den Peripheriegeräten an.
C670/C670D/L770/L775/L770D/L775D Anhang A Technische Daten In diesem Anhang werden die technischen Daten des Computers zusammengefasst. Maße und Gewicht Größe 413.6 mm x 270 mm x 28/37.9 mm (B x T x H, ohne hervorstehende Teile). Umgebungsbedingungen Bedingungen Umgebungstemperatur Relative Luftfeuchtigkeit Betrieb 5°C bis 35°C 20% bis 80%(nicht kondensierend) Außer Betrieb -20°C bis 60°C 10% bis 90%(nicht kondensierend) Verdunstungstemperatur Max.
C670/C670D/L770/L775/L770D/L775D Pinbelegung beim Anschluss für einen externen RGB-Monitor 5 1 15 11 10 6 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Datensignal I/O 13 HSYNC Horizontales Sync-Signal O 14
C670/C670D/L770/L775/L770D/L775D Anhang B Netzkabel und Netzstecker Der Stecker des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird.
C670/C670D/L770/L775/L770D/L775D Für die USA und Kanada müssen Konfigurationen mit zwei Kontakten dem Typ 2-15P (250 V) oder 1-15P (125 V) und Konfigurationen mit drei Kontakten dem Typ 6-15P (250 V) oder 5-15P (125 V) entsprechen wie in U.S. National Electrical Code Handbook und Canadian Electrical Code Part II definiert. Die folgenden Abbildungen zeigen die Steckerformen für die USA und Kanada, Großbritannien, Australien, Europa und China.
C670/C670D/L770/L775/L770D/L775D Anhang C Rechtliche Hinweise In diesem Kapitel werden rechtliche Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Nicht verwendete Symbole Die Gehäuse von Computern sind häufig so konstruiert, dass alle innerhalb einer Produktserie möglichen Konfigurationen darin untergebracht werden können. Das Modell Ihrer Wahl bietet deshalb unter Umständen nicht alle Funktionen und Spezifikationen, für die sich Symbole oder Schalter am Computer-Gehäuse befinden.
C670/C670D/L770/L775/L770D/L775D Schutzfunktion, die das Risiko von Datenverlusten oder Geräteschäden bei Verwendung des Computers außerhalb der empfohlenen Bedingungen verringern soll. Um Datenverlust zu vermeiden, sollten Sie in regelmäßigen Abständen Sicherungskopien (Backups) Ihrer Daten erstellen und auf einem externen Speichermedium speichern. Die optimale Leistung erzielen Sie, wenn Sie den Computer unter den empfohlenen Betriebsbedingungen verwenden.
C670/C670D/L770/L775/L770D/L775D Speicher anzeigen, stehen dem Betriebssystem trotzdem nur ca. 3 GB Speicher zur Verfügung. Computer mit einem 64-Bit-Betriebssystem können 4 GB oder mehr Systemspeicher ansprechen. Akkulaufzeit Die Akkulaufzeit kann je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen erheblich variieren, dazu tragen auch die normalen Leistungsschwankungen aufgrund der Bauweise einzelner Komponenten bei.
C670/C670D/L770/L775/L770D/L775D variiert in Abhängigkeit von der Größe des Systemspeichers und anderen Faktoren. Wireless LAN Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN kann variieren. Sie hängt von folgenden Faktoren ab: elektromagnetische Umgebung, Hindernissen, Aufbau und Konfiguration des Zugangspunktes sowie Aufbau des Clients und Software/Hardware-Konfiguration. Die tatsächliche Übertragungsgeschwindigkeit wird unter dem theoretischen Maximum liegen.
C670/C670D/L770/L775/L770D/L775D Anhang D Informationen zu drahtlosen Geräten Wireless-LAN-Interoperabilität Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.11 Standard für Wireless LANs (Revision a/b/g/n oder b/g/n) wie vom Institute of Electrical and Electronics Engineers definiert und genehmigt.
C670/C670D/L770/L775/L770D/L775D Wenn Sie Fragen zur Verwendung der Wireless-LAN- oder BluetoothModule von TOSHIBA haben, besuchen Sie http:// www.pc.support.global.toshiba.com. In Europa können Sie die Website http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm konsultieren. Ihr Bluetooth-Produkt ist nicht mit Geräten kompatibel, die BluetoothSpezifikationen Version 1.0B verwenden.
C670/C670D/L770/L775/L770D/L775D Europa Eingeschränkte Verwendung der 2400,0-2483,5-MHzFrequenzen in Europa Frankreich: Verwendung im Freien begrenzt auf 10 m W.e.i.r.p. innerhalb der Frequenz 2454-2483,5 MHz Nutzung für militärische Funkortung. Die Flexibilisierung des 2,4-GHz-Frequenzbands („Refarming“) wurde in den letzten Jahren vorangetrieben, um die aktuelle gelockerte Regulierung zu ermöglichen. Vollständige Umsetzung für 2012 geplant.
C670/C670D/L770/L775/L770D/L775D Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2. Zur Verwendung für lokale Netzwerke zur Kommunikation von Bordbesatzungen im Bereich des Flughafens und während aller Flugphasen zugelassen. Zur Verwendung für öffentlich zugängliche lokale Netzwerke an Bord von Flugzeigen während des Flugs in Flughöhen über 3000 m zugelassen.
C670/C670D/L770/L775/L770D/L775D Um den europäischen Gesetzen zum Betrieb von Wireless LANs zu entsprechen, gelten die obigen Einschränkungen für die Verwendung der 2,4- und 5-GHz-Kanäle nur für den Betrieb im Freien. Überprüfen Sie bitte mithilfe der Wireless LAN Utility, welcher Kanale jeweils für den Betrieb verwendet wird.
C670/C670D/L770/L775/L770D/L775D Vorsicht: Bestimmungen bezüglich Störungen durch hochfrequente Felder Wegen der Verwendung des Frequenzbereichs zwischen 5,15 und 5.25 GHz darf dieses Gerät nur im Indoor-Bereich (d. h. in Gebäuden) benutzt werden. Taiwan Artikel 12 Ohne Genehmigung von der DGT darf kein Unternehmen oder Benutzer bei einer zugelassenen Niedrigenergiefunkeinrichtung die Frequenz ändern, die Übertragungsstärke ändern oder die ursprünglichen Merkmale und die Leistung ändern.
C670/C670D/L770/L775/L770D/L775D 1. 2. 3. Vergewissern Sie sich vor der Verwendung dieses Geräts, dass es keine Störungen der oben genannten Einrichtungen verursacht. Falls es durch dieses Gerät zu Störungen anderer Funkstationen kommt, ändern Sie sofort die verwendete Frequenz, wechseln Sie den Standort oder schalten Sie das Gerät aus Wenden Sie sich an einen autorisierten TOSHIBA-Serviceanbieter, wenn es durch dieses Gerät zu Problemen mit sonstigen Funkstationen kommt. 2.
C670/C670D/L770/L775/L770D/L775D Geräteautorisierung Dieses Gerät trägt die Technical Regulation Conformity Certification und gehört zur Geräteklasse von Funkeinrichtungen von NiedrigenergieDatenkommunikationssystemen gemäß den entsprechenden japanischen Gesetzen. Atheros AR9285 Wireless Network Adapter b/g/n(b/g) Name der Funkeinrichtung: AR5B95 DSP Research, Inc. Zulassungsnummer: D081038003 Realtek® RTL8188CE Wireless LAN 802.
C670/C670D/L770/L775/L770D/L775D Ägypten Albanien Argentinien Aserbaidschan Australien Bahrain Belgien Bolivien Bosnien und Herzegowina Bulgarien Chile China Costa Rica Dänemark Deutschland Dominikanische Republik Ecuador El Salvador Estland Finnland Frankreich Ghana Griechenland Großbritannien Guatemala Hongkong Indien Indonesien Irland Island Italien Japan Jemen Jordanien Kambodscha Kanada Kasachstan Katar Kenia Kirgisistan Kolumbien Kroatien Kuwait Lettland Li
C670/C670D/L770/L775/L770D/L775D Verwenden Sie dieses Gerät nicht in Gebieten oder Ländern, die in der folgenden Tabelle nicht aufgeführt sind. Ein Ad-hoc-Modus ist im Modus 802.11n nicht verfügbar. Verfügbare Kanäle der Peer-to-Peer-Verbindung im Ad-hoc-Modus ist Ch1-Ch11. Die Verbindung mit einem Access Point im Infrastrukturmodus erfolgt über CH1-CH13.
C670/C670D/L770/L775/L770D/L775D Sri Lanka Südafrika Südkorea Taiwan Thailand Tschechien Türkei Ukraine Ungarn Uruguay USA VAE Venezuela Vietnam Zypern Länder-/Gebietszulassungen für den Atheros AR9002WB-1NG Wireless Network Adapter b/g/n(b/g) Wireless LAN und Bluetooth Dieses Gerät ist gemäß den Funkstandards der in der folgenden Tabelle aufgeführten Länder/Gebiete zugelassen. Verwenden Sie dieses Gerät nicht in Gebieten oder Ländern, die in der folgenden Tabelle nicht aufgeführt sind.
C670/C670D/L770/L775/L770D/L775D Katar Kenia Kirgisistan Kolumbien Komoren Kroatien Kuwait Lesotho Lettland Libanon Liberia Libyen Liechtenstein Litauen Luxemburg Madagaskar Malawi Malaysia Malta Marokko Mauritius Mexiko Monaco Montenegro Mosambik Namibia Neuseeland Nicaragua Niederlande Niger Nigeria Norwegen Oman Österreich Pakistan Panama Paraguay Peru Philippinen Polen Portugal Puerto Rico Reunion Ruanda Rumänien Sambia Saudi-Arabien Schweden Schweiz Sen
C670/C670D/L770/L775/L770D/L775D Stichwortverzeichnis A D Akku Energiesparmodus 4-7 ersetzen 5-11 Kapazität überwachen 5-9 Lebensdauer verlängern 5-10 RTC-Akku 2-19, 5-7 Typen 5-7 zusätzlicher 5-1 Datenträger für die SoftwareWiederherstellung 4-27 DC IN LED 2-1, 2-10 Dokumentationsliste 1-1 Drahtlose Kommunikation LED 2-11 Akku-LED 5-6 Duales Zeigegerät Touchpad 3-1 Touchpad-Klicktasten 3-1 verwenden 3-1 Anzeige automatische Abschaltung 4-6 Helligkeit erhöhen 3-4 Helligkeit verringern 3-4 DVD-Super-Mu
C670/C670D/L770/L775/L770D/L775D FN + 1 (Verkleinern) 3-4 Helligkeit erhöhen 3-4 Helligkeit verringern 3-4 Ruhezustand 3-4 Sperre 3-4 Ton aus 3-4 Touchpad 3-4 Wireless 3-4 Zoom 3-4 FN + 2 (TOSHIBA ZoomDienstprogramm, vergrößern) 3-4, 3-5 FN + 2 (Vergrößern) 3-4 FN + ESC (Ton aus) 3-4 FN + F1 (Sperre) 3-4 HW Setup Anzeige 4-18 Fenster 4-16 öffnen 4-16 SATA 4-21 Tastatur 4-19 USB 4-21 FN + F2 (Energiesparplan) 3-4 FN + F3 (Energiesparmodus) 3-4 FN + F4 (Ruhezustand) 3-4 HW-Setup allgemein 4-16 Bootreihe
C670/C670D/L770/L775/L770D/L775D N R Netzadapter anschließen 1-3 DC IN 19V-Buchse 2-2, 2-11 zusätzlicher 3-45 RecoveryFestplattenlaufwerk 4-26 Reinigung des Computers 3-48 Ruhezustand 1-10, 3-4, 4-7 Neustarten des Computers 1-12 P Schutz vor Überhitzung 3-49, 4-7 Passwort beim Einschalten 4-7, 4-15 Benutzer 4-15 Supervisor 4-15 Probleme Akku 6-5 Audiosystem 6-14 Bluetooth 6-17 Echtzeituhr 6-7 externer Monitor 6-15 Festplatte 6-8, 6-9 Hardware- und SystemCheckliste 6-4 interner Bildschirm 6-8 LAN 6-16,
C670/C670D/L770/L775/L770D/L775D einschalten 1-6 Energiesparmodus 1-8 LCD-gesteuerte Ein-/ Ausschaltung 4-7, 5-13 Ruhezustand 1-10 T V Video-RAM 2-19 W Webcam 2-8, 2-17 Wiederherstellungsmedien 4-25 Tastatur FN-Einrastfunktion 3-5 Funktionstasten F1...