Benutzerhandbuch C870/C870D/L870/L870D/L875/ L875D
C870/C870D/L870/L870D/L875/L875D Inhaltsverzeichnis Vorwort Allgemeine Vorsichtsmaßnahmen Kapitel 1 Erste Schritte Teileprüfliste .......................................................................................... 1-1 Erste Schritte ......................................................................................... 1-2 Kapitel 2 Hardware-Überblick Vorderseite mit geschlossenem Bildschirm ....................................... 2-1 Linke Seite ................................................
C870/C870D/L870/L870D/L875/L875D Umgang mit dem Computer ............................................................... 3-48 Schutz vor Überhitzung ...................................................................... 3-49 Kapitel 4 Utilitys und erweiterte Verwendung Utilitys und Anwendungen ................................................................... 4-1 Sonderfunktionen ..................................................................................
C870/C870D/L870/L870D/L875/L875D Copyright ©2012 by TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig. Bezüglich der Nutzung der in diesem Handbuch enthaltenen Informationen wird keine Patenthaftung übernommen.
C870/C870D/L870/L870D/L875/L875D Corel Digital Studio ist eine Marke oder eingetragene Marke der Corel Corporation. TouchPad ist eine Marke von Synaptics, Inc. Wi-Fi ist eine eingetragene Marke der Wi-Fi Alliance. Secure Digital und SD sind Marken der SD Card Association. MultiMediaCard und MMC sind Marken der MultiMediaCard Association. Blu-ray Disc™, Blu-ray™, BDXL™, Blu-ray 3D™ und die entsprechenden Logos sind Marken der Blu-ray Disc Association.
C870/C870D/L870/L870D/L875/L875D HDMI-Anschluss und der Mikrofonbuchse müssen abgeschirmte Kabel verwendet werden. Wenn Sie Änderungen an diesem Gerät vornehmen, die nicht ausdrücklich von TOSHIBA oder von durch TOSHIBA autorisierten Dritten genehmigt wurden, verlieren Sie möglicherweise das Recht, dieses Gerät zu verwenden. FCC-Bedingungen Dieses Gerät entspricht Teil 15 der FCC-Bestimmungen. Der Betrieb unterliegt folgenden Bedingungen: 1. 2. Dieses Gerät darf keine störenden Interferenzen verursachen.
C870/C870D/L870/L870D/L875/L875D elektromagnetischen Verträglichkeit (EMV) und Sicherheit. TOSHIBA kann jedoch nicht garantieren, dass dieses Produkt diese EMV-Normen auch dann erfüllt, wenn Optionen (z.B. Grafikkarte, Modem) oder Kabel (z.B. Druckerkabel), die nicht von TOSHIBA hergestellt oder vertrieben werden, angeschlossen oder eingebaut werden. In diesem Fall ist die Person, die diese Optionen / Kabel angeschlossen / eingebaut hat, dafür verantwortlich, dass die erforderlichen Normen erfüllt werden.
C870/C870D/L870/L870D/L875/L875D Videostandardhinweis DIESES PRODUKT WIRD FÜR PERSÖNLICHEN, NICHTKOMMERZIELLEN GEBRAUCH UNTER DER AVC-, VC1- UND MPEG-4PATENTPORTFOLIOLIZENZ AN ENDKONSUMENTEN LIZENZIERT. HIERDURCH IST ES DIESEN MÖGLICH (I) VIDEOS UNTER EINHALTUNG DER OBEN GENANNTEN STANDARDS ("VIDEO") ZU CODIEREN BZW. (II) AVC-, VC-1 UND MPEG-4-VIDEOS, DIE VON EINEM ENDKONSUMENTEN IN EINER PERSÖNLICHEN, NICHTKOMMERZIELLEN AKTIVITÄT CODIERT WURDEN BZW.
C870/C870D/L870/L870D/L875/L875D Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
C870/C870D/L870/L870D/L875/L875D Entsorgung des Computers und der Akkus Entsorgen Sie diesen Computer entsprechend den örtlich geltenden Gesetzen und Vorschriften. Weitere Informationen erhalten Sie bei den zuständigen Behörden Ihrer Gemeinde. Dieser Computer enthält wiederaufladbare Batterien (Akkus). Nach längerer Verwendung können die Akkus die Ladung nicht mehr halten und müssen ersetzt werden. Akkus und Batterien gehören nicht in den Hausmüll. Schützen Sie die Umwelt.
C870/C870D/L870/L870D/L875/L875D ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. In diesem Fall ist der Computer mit dem ENERGY STAR®-Logo gekennzeichnet, und es gelten die folgenden Angaben. TOSHIBA ist Partner im ENERGY STAR Program und hat diesen Computer so entwickelt, dass die ENERGY STARRichtlinien für die Energieeffizienz eingehalten werden.
C870/C870D/L870/L870D/L875/L875D Die Verwendung von Bedienelementen, die Änderung von Einstellungen und die Durchführung von Schritten, die in diesem Handbuch nicht angegeben sind, kann zur Freisetzung gefährlicher Strahlung führen. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden. 1. Panasonic Precision Devices Co., Ltd. DVD-SuperMulti mit Double Layer UJ8B0 Blu-ray™ Combo-Laufwerk UJ160 Blu-ray™-Brenner UJ260 Panasonic Precision Devices Co., Ltd.
C870/C870D/L870/L870D/L875/L875D Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINATO-KU,TOKYO,108-0022 JAPAN 4. SONY Optiarc, Inc. DVD SuperMulti mit Double Layer AD-7760H Complies with 21 CFR, Chapter 1, Subchapter J. Sony Optiarc Inc. 1-11-1 Osaki Shinagawa-ku, Tokyo, 141-0032, Japan Vorsichtsmaßnahmen CAUTION: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft.
C870/C870D/L870/L870D/L875/L875D Vorwort Mit dem Kauf dieses Computers haben Sie eine gute Entscheidung getroffen. Dieser leistungsstarke Notebook-Computer wird Sie jahrelang verlässlich bei der Arbeit unterstützen und bietet dabei hervorragende Erweiterungsmöglichkeiten sowie Multimediafähigkeit. In diesem Handbuch wird beschrieben, wie Sie Ihren Computer einrichten und verwenden.
C870/C870D/L870/L870D/L875/L875D ABC Wenn Sie für einen Vorgang auf ein Symbol klicken oder Text eingeben müssen, wird der Name des Symbols oder der einzugebende Text in der links dargestellten Schriftart wiedergegeben. Hinweise Wichtige Informationen werden in diesem Handbuch auf zwei Arten dargestellt. Sie erscheinen jeweils wie unten abgebildet. Weist auf eine potenziell gefährliche Situation hin, die bei Nichtbeachtung der Anweisungen zum Tod oder zu schweren Verletzungen führen kann.
C870/C870D/L870/L870D/L875/L875D Allgemeine Vorsichtsmaßnahmen TOSHIBA-Computer gewährleisten ein Optimum an Sicherheit, verringern die gesundheitliche Belastung durch Überanstrengung und minimieren die Risiken beim mobilen Einsatz der Geräte. Dennoch können Sie durch Einhaltung einiger Vorsichtsmaßnahmen dazu beitragen, gesundheitliche Beeinträchtigungen oder Schäden am Computer zu vermeiden. Lesen Sie deshalb unbedingt die nachfolgenden Hinweise und die mit „Vorsicht“ markierten Abschnitte im Handbuch.
C870/C870D/L870/L870D/L875/L875D Geräte, die elektromagnetische Felder erzeugen, wie Stereolautsprecher (andere als an den Computer angeschlossene Lautsprecher) oder Freisprechanlagen. Rasche Temperaturwechsel oder Veränderungen der Luftfeuchtigkeit und deren Verursacher (z. B. Lüftungsschlitze von Klimaanlagen oder Heizungen). Extreme Hitze, Kälte oder Luftfeuchtigkeit.
C870/C870D/L870/L870D/L875/L875D dem Computer und einem Mobiltelefon, das gerade verwendet wird, eingehalten werden. Handbuch für sicheres und angenehmes Arbeiten Alle wichtigen Informationen zur sicheren und richtigen Verwendung des Computers finden Sie im mitgelieferten Handbuch für sicheres und angenehmes Arbeiten. Sie sollten es lesen, bevor Sie am Computer arbeiten.
C870/C870D/L870/L870D/L875/L875D Kapitel 1 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Einige der in diesem Handbuch beschriebenen Einrichtungen funktionieren eventuell nicht ordnungsgemäß, wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
C870/C870D/L870/L870D/L875/L875D Corel Digital Studio für TOSHIBA* TOSHIBA eco Utility TOSHIBA HW Setup TOSHIBA Value Added Package TOSHIBA Web-Kamera-Anwendung TOSHIBA Service Station TOSHIBA PC Health Monitor TOSHIBA Schlaf- Dienstprogramm* Benutzerhandbuch (vorliegendes Handbuch) * Bei einigen Modellen verfügbar. Je nach Modell verfügen Sie möglicherweise nicht über sämtliche oben aufgeführte Software. Erste Schritte Lesen Sie unbedingt den Abschnitt Erstmaliges Starten des Systems.
C870/C870D/L870/L870D/L875/L875D Es ist empfehlenswert, den Inhalt des eingebauten Festplattenlaufwerks oder anderer wichtiger Speichergeräte regelmäßig auf externen Medien zu sichern. Die allgemein verwendeten Speichermedien sind nicht dauerhaft stabil; unter bestimmten Umständen können Daten verloren gehen. Speichern Sie den Inhalt des Arbeitsspeichers auf der Festplatte oder auf einem anderen Speichermedium, bevor Sie ein Gerät oder eine Anwendung installieren. Andernfalls könnten Sie Daten verlieren.
C870/C870D/L870/L870D/L875/L875D Verwenden Sie keinen 3-zu-2-Kontaktadapter. Halten Sie sich beim Anschließen des Netzadapters an den Computer immer an die Reihenfolge der Schritte, die im Benutzerhandbuch angegeben sind. Das Anschließen des Netzkabels an eine Strom führende elektrische Steckdose muss in der Prozedur immer zuletzt erfolgen.
C870/C870D/L870/L870D/L875/L875D 2. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in die Gleichstrom-Eingangsbuchse DC IN 19V auf der linken Seite des Computers. Abbildung 1-3 Gleichstromausgangsstecker an den Computer anschließen 1 2 1. 19-V-Gleichstromeingang (DC IN) 3. 2. Gleichstromausgangsstecker Schließen Sie das Netzkabel an eine spannungsführende Steckdose an - die DC IN/Akku-Anzeige an der Vorderseite des Computers sollte leuchten.
C870/C870D/L870/L870D/L875/L875D Drücken Sie nicht auf den Bildschirm. Heben Sie den Computer nicht am Bildschirm hoch. Schließen Sie den Bildschirm nicht, wenn sich Stifte oder andere Gegenstände zwischen dem Bildschirm und der Tastatur befinden. Halten Sie den Computer mit einer Hand an der Handballenauflage fest, wenn Sie den Bildschirm mit der anderen Hand auf- oder zuklappen. Öffnen und schließen Sie den Bildschirm langsam und üben Sie dabei keine zu große Kraft aus.
C870/C870D/L870/L870D/L875/L875D Erstmaliges Starten des Systems Der Einrichtungsbildschirm von Windows 7 ist der erste Bildschirm, der nach dem Einschalten angezeigt wird. Befolgen Sie die Anweisungen auf dem Bildschirm, um das Betriebssystem korrekt zu installieren. Lesen Sie die Software-Lizenzbedingungen sorgfältig durch, wenn sie angezeigt werden. Ausschalten Der Computer kann in einem von drei Modi ausgeschaltet werden: Beenden (Boot), Ruhezustand oder Energiesparmodus.
C870/C870D/L870/L870D/L875/L875D Hauptspeicher des Computers, sodass Sie beim nächsten Einschalten dort mit Ihrer Arbeit fortfahren können, wo Sie sie unterbrochen haben. Wenn Sie den Computer an Bord eines Flugzeugs oder in Umgebungen, in denen elektronische Geräte gesteuert oder reguliert werden, ausschalten müssen, fahren Sie den Computer immer vollständig herunter.
C870/C870D/L870/L870D/L875/L875D Sie sparen Energie, indem das System heruntergefahren wird, wenn während eines bestimmten Zeitraums, dessen Länge mit der Funktion „System-Energiesparmodus“ festgelegt wird, keine Eingaben oder Hardwarezugriffe erfolgen. Sie können die LCD-gesteuerte Ausschaltung verwenden. Energiesparmodus ausführen Der Energiesparmodus lässt sich auf drei Arten starten: Klicken Sie auf Start, zeigen Sie auf das Pfeilsymbol ( ) und wählen Sie Energiesparmodus aus dem Menü.
C870/C870D/L870/L870D/L875/L875D Speichern Sie Ihre Arbeit. Wird der Ruhezustand aktiviert, speichert der Computer den Inhalt des Arbeitsspeichers auf der Festplatte. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. Wenn Sie den Akku entfernen oder den Netzadapter abtrennen, bevor der Speichervorgang abgeschlossen ist, gehen Daten verloren. Bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Ruhezustand befindet. Dabei können Daten verloren gehen.
C870/C870D/L870/L870D/L875/L875D Daten im Ruhezustand speichern Wenn Sie den Computer im Ruhezustand ausschalten, benötigt der Computer einen Moment, um die aktuellen Daten aus dem Arbeitsspeicher auf der Festplatte zu speichern. Nachdem Sie den Computer ausgeschaltet haben und der Inhalt des Arbeitsspeichers auf der Festplatte gespeichert wurde, schalten Sie die angeschlossenen Peripheriegeräte aus. Schalten Sie den Computer oder die Peripheriegeräte nicht sofort wieder ein.
C870/C870D/L870/L870D/L875/L875D Kapitel 2 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie in Anhang C, Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
C870/C870D/L870/L870D/L875/L875D LED „Power“ Die Anzeige Power leuchtet normalerweise weiß, wenn der Computer eingeschaltet ist. Wenn Sie den Computer jedoch in den Ruhezustand schalten, blinkt diese LED weiß - ungefähr zwei Sekunden an, zwei Sekunden aus. LED „Drahtlose Kom- Die LED für die Drahtlose Kommunikation munikation“ leuchtet gelb, wenn die Bluetooth- oder Wireless LAN-Funktionen aktiviert sind. Einige Modelle verfügen über Bluetooth und Wireless LAN-Funktionen.
C870/C870D/L870/L870D/L875/L875D 19-V-Gleichstromein- Der Netzadapter wird an diese Buchse gang angeschlossen, um den Computer mit Strom zu versorgen und die internen Batterien aufzuladen. Bitte beachten Sie, dass Sie nur das mit dem Computer beim Kauf mitgeliefert Netzadaptermodell verwenden sollten - die Verwendung eines falschen Netzadapters kann zu Schäden am Computer führen. Universal Serial Bus Ein USB-Anschluss, der dem USB 2.0-Standard (USB 2.
C870/C870D/L870/L870D/L875/L875D Kopfhörerbuchse An die Mini-Kopfhörerbuchse mit einem Durchmesser von 3,5mm können Sie einen Stereokopfhörer anschließen. Mikrofonbuchse An die Mini-Mikrofonbuchse mit einem Durchmesser von 3,5mm können Sie einen dreiadrigen Ministecker für die Audioeingabe über ein Stereomikrofon anschließen.
C870/C870D/L870/L870D/L875/L875D Schließen Sie nur ein LAN-Kabel an die LAN-Buchse an. Wenn Sie ein anderes Kabel anschließen, kann es zu Schäden oder Fehlfunktionen kommen. Schließen Sie das LAN-Kabel nicht an eine Stromversorgung an. Wenn Sie ein anderes Kabel anschließen, kann es zu Schäden oder Fehlfunktionen kommen. Anschluss für einen externen RGB-Monitor Dieser Anschluss ist ein 15-poliger, analoger VGA-Anschluss. Informationen zur Pinbelegung des RGB-Monitoranschlusses finden Sie in Anhang A.
C870/C870D/L870/L870D/L875/L875D Unterseite Diese Abbildung zeigt die Unterseite des Computers. Sie sollten darauf achten, dass der Bildschirm geschlossen ist, bevor Sie den Computer herumdrehen, um Schäden zu vermeiden. Abbildung 2-5 Unterseite des Computers 1 2 3 4 1. Akkuverriegelung 2. Akkufreigabe 3. Sockel für Speichermodul 4. Lüftungsschlitze Darstellung kann je nach Modell abweichen. Akkuverriegelung Schieben Sie diese Verriegelung zur Seite, um den Akku entfernen zu können.
C870/C870D/L870/L870D/L875/L875D Blockieren Sie die Lüftungsschlitze nicht. Achten Sie darauf, dass keine Metallgegenstände, z. B. Schrauben, Heftklammern und Büroklammern in die Lüftungsschlitze gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch Schäden verursacht werden könnten und ein Feuer ausbrechen könnte. Entfernen Sie die Staubansammlungen an den Lüftungsschlitzen vorsichtig mit einem weichen Tuch.
C870/C870D/L870/L870D/L875/L875D Weitere Informationen zur Wireless-LAN-Funktion finden Sie in Anhang C, Rechtliche Hinweise. Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen importieren und aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Audiosystem in Kapitel 3, „Grundlagen der Bedienung“. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist.
C870/C870D/L870/L870D/L875/L875D Bildschirm 43,9 cm (17,3") LCD mit einer der folgenden Auflösungen: HD+, 1600 horizontale x 900 vertikale Pixel Full HD, 1920 horizontale x 1080 vertikale Pixel Wenn der Computer mit dem Netzadapter betrieben wird, ist das auf dem internen Bildschirm angezeigte Bild etwas heller als bei Akkubetrieb. Der Unterschied bei der Helligkeit soll bei Akkubetrieb Energie sparen. Rechtliche Hinweise (LCD) Weitere Informationen zum LCD finden Sie in Anhang C, Rechtliche Hinweise.
C870/C870D/L870/L870D/L875/L875D LCD-Sensorschalter Dieser Schalter wird beim Schließen oder Öffnen des Bildschirms automatisch betätigt und aktiviert die LCD-gesteuerte Ein-/Ausschaltung. Wenn Sie beispielsweise den Bildschirm schließen, geht der Computer in den Ruhezustand und schaltet sich selbst ab. Wenn Sie dann den Bildschirm das nächste Mal öffnen, startet der Computer automatisch und kehrt zu der Anwendung zurück, an der Sie zuletzt gearbeitet haben.
C870/C870D/L870/L870D/L875/L875D Rechtliche Hinweise (Kapazität des Festplattenlaufwerks) Weitere Informationen zur Kapazität des Festplattenlaufwerks finden Sie in Anhang C, „Rechtliche Hinweise“. RTC-Batterie Das Gerät verfügt über einen internen Akku für die Versorgung der internen Echtzeituhr (Real Time Clock, RTC) und des Kalenders. Video-RAM Der Speicher im Grafikadapter eines Computers, der verwendet wird, um ein im Bitmap-Format angezeigtes Bild zu speichern.
C870/C870D/L870/L870D/L875/L875D Weitere Informationen zum Grafikchip (GPU) finden Sie in Anhang C, „Rechtliche Hinweise“. Intel® Display Power Saving Technology Das Modell mit Intel-GPU ist möglicherweise mit der Display Power Saving Technology (DPST) ausgestattet, die den Energieverbrauch des Computers durch Optimierung des Bildkontrasts beim internen LCD verringern kann.
C870/C870D/L870/L870D/L875/L875D Start -> Alle Programme -> AMD VISION Engine Control Center/ Catalyst Control Center -> AMD VISION Engine Control Center/ Catalyst Control Center In diesem Bedienfeld: 1. 2. Wählen Sie PowerPlay™ unter Power. Aktivieren Sie das Kontrollkästchen Enable PowerPlay™ (PowerPlay™ aktivieren), ebenso wie das Kontrollkästchen Enable Vari-Bright™ (Vari-Bright™ aktivieren).
C870/C870D/L870/L870D/L875/L875D Kapitel 3 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchpads Legen Sie Ihren Finger auf das Touchpad, und bewegen Sie ihn in die gewünschte Richtung. Der Bildschirmzeiger folgt Ihren Bewegungen. Abbildung 3-1 Touchpad und Touchpad-Klicktasten 1 2 1. Touchpad 2. Touchpad-Klicktasten Darstellung kann je nach Modell abweichen.
C870/C870D/L870/L870D/L875/L875D Die Anzahl der Tasten auf der Tastatur ist davon abhängig, für welches Land/Gebiet der Computer konfiguriert wurde. Es stehen Tastaturbelegungen für verschiedene Sprachen zur Verfügung. Auf der Tastatur befinden sich verschiedene Tastentypen: Schreibmaschinentasten, Funktionstasten, Softkeys, Hotkeys, und Windows-Sondertasten. Entfernen Sie nie die Tastenkappen der Tastatur. Dadurch könnten Sie Komponenten unter den Tastenkappen beschädigen.
C870/C870D/L870/L870D/L875/L875D beschriftet sind, erfüllen beim Computer besondere Aufgaben, wenn sie zusammen mit der Taste FN benutzt werden. Softkeys: FN mit Kombination mit anderen Tasten Die Taste Fn (Funktion) ist eine besondere Taste, die in Kombination mit anderen Tasten so genannte Softkeys bildet. Softkeys dienen dazu, bestimmte Funktionsmerkmale zu aktivieren, zu deaktivieren oder zu konfigurieren. Bestimmte Softwareprogramme können die Funktion der Softkeys beeinträchtigen oder deaktivieren.
C870/C870D/L870/L870D/L875/L875D Weitere Informationen finden Sie in der Hilfe zu TOSHIBA FlashCards. Um diese Hilfe aufzurufen, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Tools & Utilitys -> FlashCards. Klicken Sie im Fenster Einstellungen für Flash Cards auf die Schaltfläche Hilfe. Hotkeys In diesem Abschnitt werden die den Hotkeys zugeordneten Funktionen beschrieben. Sonderfunktio nsmodus F1-F12Funktion Standardmodu s F1 FN + F1 Ruft die mit der Software bereitgestellte Hilfedatei auf.
C870/C870D/L870/L870D/L875/L875D Sonderfunktio nsmodus F1-F12Funktion Standardmodu s FN + 1 FN + 1 Verkleinert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart. FN + 2 FN + 2 Vergrößert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart. FN + Leertaste FN + Leertaste Ändert die Bildschirmauflösung.
C870/C870D/L870/L870D/L875/L875D 3. Lassen Sie ALT los; das ASCII-Zeichen wird nun auf dem Bildschirm angezeigt. Optische Laufwerke Der Computer ist mit einem DVD-Super-Multi-Laufwerk, Blu-ray™-ComboLaufwerk oder Blu-ray™-Brenner (BDXL™) ausgestattet. Wenn der Computer auf ein optisches Laufwerk zugreift, leuchtet am Laufwerk eine Anzeige.
C870/C870D/L870/L870D/L875/L875D So legen Sie eine Disc ein: 1. 2. Wenn der Computer eingeschaltet ist, drücken Sie auf die Entnahmetaste, um die Laufwerklade etwas zu öffnen. Ziehen Sie vorsichtig an der Lade, um sie vollständig zu öffnen. Abbildung 3-6 Entnahmetaste drücken und Laufwerklade öffnen. 2 1 1. Entnahmetaste 3. 2. Laufwerklade Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 3-7 Disc einlegen 1 1.
C870/C870D/L870/L870D/L875/L875D 5. Drücken Sie die Lade in der Mitte nach hinten, um sie zu schließen. Schieben Sie vorsichtig, bis sie einrastet. Falls dies Disc nicht korrekt eingelegt ist, kann sie beim Schließen der Lade beschädigt werden. Außerdem lässt sich die Lade dann möglicherweise nicht mehr vollständig öffnen, wenn Sie auf die Entnahmetaste drücken.
C870/C870D/L870/L870D/L875/L875D Abbildung 3-8 Lade manuell öffnen 1 Φ1.0mm 1. Entnahmeöffnung Schalten Sie den Computer aus, bevor Sie die Entnahmeöffnung verwenden. Wenn sich die Disc beim Öffnen der Lade noch dreht, könnte sie herausfliegen und Verletzungen verursachen. Beschreibbare Discs Dieser Abschnitt führt die Typen beschreibbarer Discs auf. Informieren Sie sich in den Spezifikationen für Ihr Laufwerk über die Disc-Typen, die damit beschrieben werden können.
C870/C870D/L870/L870D/L875/L875D Beschreiben von Discs Als Schreibsoftware sind TOSHIBA Disc Creator und Corel Digital Studio im Lieferumfang des Computers enthalten. Mit Corel Digital Studio lassen sich Dateien im Videoformat schreiben. TOSHIBA Disc Creator kann zum Schreiben von Daten verwendet werden. Mit dem DVD-Super-Multi- oder Blu-ray™-Combo-Laufwerk können Sie Daten auf CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW oder DVD-RAM schreiben.
C870/C870D/L870/L870D/L875/L875D Datenträger oder Probleme mit den Hardwaregeräten zu unerwarteten Schreibfehlern führen. Deshalb ist es empfehlenswert, mindestens zwei Sicherungskopien wichtiger Daten zu erstellen, auf die Sie notfalls zurückgreifen können. Vor dem Schreiben oder Wiederbeschreiben Ausgehend von TOSHIBAs Kompatibilitätstests empfehlen wir die Produkte der folgenden Hersteller von optischen Medien. Die Qualität der Datenträger kann jedoch die Qualität der Aufzeichnung beeinflussen.
C870/C870D/L870/L870D/L875/L875D DVD-RW: DVD-Spezifikationen für wiederbeschreibbare Datenträger für Version 1.1 oder 1.2 Victor Company of Japan, Ltd. (JVC) (für Medien mit 2-, 4- und 6-facher Geschwindigkeit) MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 2-, 4- und 6facher Geschwindigkeit) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 4- und 8-facher Geschwindigkeit) DVD-RAM: (nur DVD-Super-Multi-Laufwerk) DVD-Spezifikationen für DVD-RAMs für Version 2.0, Version 2.1 oder Version 2.
C870/C870D/L870/L870D/L875/L875D Während des Beschreibens oder Wiederbeschreibens von Discs Beachten Sie während des Schreibens oder Wiederbeschreibens von Discs die folgenden Punkte: Kopieren Sie die Daten von der Festplatte auf das optische Medium. Verwenden Sie nicht die Methode Ausschneiden und Einfügen, da die Daten bei einem Schreibfehler verloren gehen. Vermeiden Sie Folgendes: Benutzerwechsel unter PC-Funktionen ausführen, zum Beispiel Maus oder Touchpad verwenden, Bildschirm öffnen oder schließen.
C870/C870D/L870/L870D/L875/L875D Kopieren Sie keine urheberrechtlich geschützten DVD-Videos und DVD-ROMs mit der TOSHIBA Disc Creator-Funktion „Disc Backup“. Mit der TOSHIBA Disc Creator-Funktion „Disc Backup“ lassen sich keine Sicherungskopien von DVD-RAM-Medien erstellen. Mit der TOSHIBA Disc Creator-Funktion „Disc Backup“ kann keine Sicherungskopie einer CD-ROM, CD-R oder CD-RW auf eine DVD-R, DVD-R DL oder DVD-RW geschrieben werden.
C870/C870D/L870/L870D/L875/L875D 1. 2. Klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Medien & Unterhaltung -> Disc Creator, um das Utility TOSHIBA Disc Creator aufzurufen. Führen Sie einen der folgenden Schritte aus, um das Einstellungsdialogfeld aufzurufen: Klicken Sie im Modus Daten-CD/DVD in der Haupt-Symbolleiste auf die Einstellungsschaltfläche (). 3. 4. 5. Wählen Sie Einstellungen für jeden Modus -> Daten-CD/DVD im Menü Einstellungen.
C870/C870D/L870/L870D/L875/L875D Wichtige Informationen Beachten Sie die folgenden Einschränkungen beim Brennen von VideoDVD- oder Blu-ray Disc™-Filmen, beim Konvertieren von Dateien oder beim Abspielen von Dateien. Bearbeiten von Digital Video Melden Sie sich mit Administratorberechtigung an, um Corel Digital Studio zu verwenden. Betreiben Sie Ihren Computer mit Netzstrom, wenn Sie Corel Digital Studio verwenden. Betreiben Sie den Computer mit voller Leistung. Verwenden Sie keine Energiesparfunktionen.
C870/C870D/L870/L870D/L875/L875D Prüfen Sie den Datenträger nach der Aufzeichnung wichtiger Daten. Die Ausgabe in den Formaten VCD und SVCD wird nicht unterstützt. Öffnen der Laufwerklade erzwingen. Bespielte DVDs und Blu-ray™-Discs Einige DVD-ROM-Laufwerke für Computer oder andere DVD-Player können DVD-R/+R/-RW/+RW/-RAM-Medien unter Umständen nicht lesen. Wenn Sie Ihre aufgenommene DVD auf dem Computer abspielen, verwenden Sie bitte den TOSHIBA VIDEO PLAYER oder den TOSHIBA Blu-ray Disc Player.
C870/C870D/L870/L870D/L875/L875D Die Wiederaufnahmefunktion kann mit einigen Discs unter TOSHIBA VIDEO PLAYER nicht verwendet werden. Bei der Videowiedergabe sollte der Netzadapter angeschlossen werden. Energiesparfunktionen können die reibungslose Wiedergabe beeinträchtigen. Wenn Sie bei der Wiedergabe von Video-DVDs den Akku verwenden, stellen Sie die Energieoptionen auf „Ausgewogen“. Der Bildschirmschoner ist während der Videowiedergabe mit TOSHIBA VIDEO PLAYER deaktiviert.
C870/C870D/L870/L870D/L875/L875D Wenn das DVD-Video-Bild nicht auf dem externen Monitor oder Fernsehgerät angezeigt wird, beenden Sie TOSHIBA VIDEO PLAYER und ändern Sie die Bildschirmauflösung. Um die Bildschirmauflösung zu ändern, klicken Sie auf Start -> Systemsteuerung -> Darstellung und Personalisierung -> Anzeige -> Auflösung anpassen. Aufgrund der Ausgabe- oder Wiedergabebedingungen können Videos jedoch auf einigen externen Monitoren oder Fernsehgeräten nicht ausgegeben werden.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Blu-ray Disc Player Achten Sie auf die folgenden Einschränkungen bei der Verwendung von TOSHIBA Blu-ray Disc Player. Hinweise zur Verwendung Diese Software kann nur mit Windows 7 verwendet werden. Die Wiedergabe von High-Bitraten-Inhalten kann zum Auslassen von Einzelbildern, zu Sprüngen in der Audiowiedergabe und zu einer Verschlechterung der Computerleistung führen. Schließen Sie alle anderen Anwendungen, bevor Sie eine Blu-ray Disc abspielen™.
C870/C870D/L870/L870D/L875/L875D Blu-ray™-Laufwerke und die damit verbundenen Speichermedien werden entsprechend den Spezifikationen für drei Vertriebsregionen hergestellt. Regionalcodes können in TOSHIBA Blu-ray Disc Player festgelegt werden. (Klicken Sie im Anzeigebereich auf die HilfeSchaltfläche. Klicken Sie dann auf das Menü Region.) Achten Sie beim Kauf von Blu-ray™-Video darauf, dass es zu Ihrem Laufwerk passt, andernfalls wird es möglicherweise nicht korrekt abgespielt.
C870/C870D/L870/L870D/L875/L875D Öffnen des TOSHIBA Blu-ray Disc Player-Handbuchs Die Merkmale und Funktionen von TOSHIBA Blu-ray Disc Player sind im Handbuch ausführlich beschrieben. Gehen Sie wie nachstehend beschrieben vor, um das Handbuch zu TOSHIBA Blu-ray Disc Player zu öffnen. Drücken Sie die nach dem Starten von TOSHIBA Blu-ray Disc Player die Taste F1 und klicken Sie auf Hilfe.
C870/C870D/L870/L870D/L875/L875D Hinweise zur 3D-Wiedergabe mit TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER verfügt über eine 3D-Wiedergabefunktion, die 3D-Videoinhalte und 2D-Videoinhalte (DVD oder Videodatei) mit 2D-zu-3DKonvertierung in Echtzeit in 3D abspielen kann. Die 3D-Effekte können nur auf einem über HDMI angeschlossenen externen Gerät angezeigt werden. Auf dem internen Bildschirm ist dies nicht möglich.
C870/C870D/L870/L870D/L875/L875D Bei der Anzeige im Vollbildmodus kann es zu einer Verzögerung beim Ausführen der folgenden Vorgänge kommen. Aufrufen von folgenden Elementen: [Kontextmenü], [Einstellungsfenster], [Titel-/Kapitelsuche], [Dateiauswahl] oder [Fehlermeldung]. Windows-Vorgänge Vorgänge in anderen Anwendungen Achten Sie darauf, für die 3D-Wiedergabe den Netzadapter anzuschließen. Die 3D-Wiedergabe kann nur im Vollbildmodus erfolgen.
C870/C870D/L870/L870D/L875/L875D Die 3D-Wiedergabefunktion des Players ist nur für den privaten Gebrauch gedacht. Bitte beachten Sie, dass die öffentliche 3DVorführung von Inhalten von Drittanbietern für unbekannte Personen oder ein größeres Publikum durch geltende Urheberrechte untersagt sein kann. Die 2D-zu-3D-Konvertierungsfunktion verwendet einen Originalalgorithmus von TOSHIBA, um Ihre 2D-Videos mit 3D-Effekt zu versehen.
C870/C870D/L870/L870D/L875/L875D Je nach Systemumgebung kann der Player automatisch in den 2DModus umschalten, wenn Sie einen der folgenden Vorgänge während der 3D-Wiedergabe ausführen. Außerdem kann es zu einer zeitlichen Verzögerung kommen, wenn die Umschaltung erfolgt. - Öffnen von Fenstern oder Popups wie [Rechtsklick-Menü], [Einstellungsfenster], [Dateiauswahl] oder [Fehlermeldung]. - Verwenden von Windows-Funktionen. - Verwenden von anderen Anwendungen.
C870/C870D/L870/L870D/L875/L875D Diese Software kann MPEG2-, MP4- und WTV-Dateien abspielen. Ihre eigenen 2D-Videoinhalte, die Sie mit einem Camcorder aufgenommen haben, und andere Inhalte, die Sie selbst erstellt haben, können in 2D oder mithilfe der 2D-zu-3D-Konvertierung in 3D abgespielt werden. Für die Wiedergabe von 3D-Inhalten werden nur Side-by-Side- und Interleave-3D-Videoformate unterstützt. Es können nicht alle Dateien abgespielt werden.
C870/C870D/L870/L870D/L875/L875D Roaming über mehrere Kanäle Card Power Management Wired Equivalent Privacy (WEP)-Datenverschlüsselung basierend auf dem 128-Bit-Verschlüsselungsalgorithmus Wi-Fi Protected Access™ (WPA™) Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN kann variieren. Sie hängt von folgenden Faktoren ab: elektromagnetische Umgebung, Hindernissen, Aufbau und Konfiguration des Zugangspunktes sowie Aufbau des Clients und Software/Hardware-Konfiguration.
C870/C870D/L870/L870D/L875/L875D Netzwerkbetriebssystem Microsoft Windows Networking Medienzugriffsprotokoll CSMA/CA (Collision Avoidance) mit Acknowledgment (ACK) Funkmerkmale Die Funkeigenschaften von Wireless LAN-Modulen können in Abhängigkeit von den folgenden Punkten variieren: Land/Vertriebsgebiet, in dem das Produkt erworben wurde Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
C870/C870D/L870/L870D/L875/L875D Weltweiter Einsatz Der Bluetooth-Funksender und -empfänger operieren im 2,4-GHzFrequenzband. Dieses Band kann lizenzfrei verwendet werden und ist mit den Funksystemen in den meisten Ländern/Gebieten kompatibel. Funkverbindungen Verbindungen zwischen zwei oder mehr Geräten lassen sich unkompliziert herstellen und werden auch dann aufrechterhalten, wenn sich Hindernisse zwischen den Geräten befinden.
C870/C870D/L870/L870D/L875/L875D Produktunterstützung: Aktuelle Informationen zur Unterstützung von Betriebssystemen, verfügbaren Sprachen oder Upgrades finden Sie auf unserer Website unter http://www.toshiba-europe.com/computers/tnt/bluetooth.htm. LAN Der Computer unterstützt Ethernet-LANs (10 Megabits pro Sekunde, 10BASE-T), Fast Ethernet-LANs (100 Megabits pro Sekunde, 100BASETX) und Gigabit Ethernet-LANs (1000 Megabits pro Sekunde, 1000BASET).
C870/C870D/L870/L870D/L875/L875D Schließen Sie den Netzadapter an, bevor Sie das LAN-Kabel anschließen. Der Netzadapter muss angeschlossen bleiben, während das LAN verwendet wird. Wenn Sie den Netzadapter abtrennen, während der Computer auf das LAN zugreift, kann das System abstürzen. Schließen Sie nur das LAN-Kabel, keine andere Kabel an die LANBuchse an. Andernfalls könnte es zu Fehlfunktionen kommen. Schließen Sie kein Strom abgebendes Gerät an das LAN-Kabel an, wenn es mit der LAN-Buchse verbunden ist.
C870/C870D/L870/L870D/L875/L875D Peripheriegeräte Externer Monitor HDMI-Gerät Sonstiges Sicherheitsschloss Optionales TOSHIBA-Zubehör Speichermediensteckplatz Der Computer ist mit einem Speichermediensteckplatz für verschiedene Speichermedien mit unterschiedlicher Speicherkapazität ausgerüstet. Damit können Sie problemlos Daten von Geräten wie Digitalkameras und PDAs übertragen. Achten Sie darauf, dass keine Fremdkörper in den Speichermediensteckplatz gelangen.
C870/C870D/L870/L870D/L875/L875D Speichermedien In diesem Abschnitt finden Sie Informationen zu wichtigen Sicherheitsmaßnahmen beim Umgang mit Speichermedien. Hinweise zu Speicherkarten SD/SDHC/SDXC-Speicherkarten erfüllen die Anforderungen der SDMI (Secure Digital Music Initiative), einer Technologie, die das unrechtmäßige Kopieren oder Wiedergeben digitaler Musik verhindert.
C870/C870D/L870/L870D/L875/L875D Wenn Sie die gesamte SD-Speicherkarte inklusive geschützten Bereich formatieren möchten, verwenden Sie eine Anwendung, die das Kopierschutzsystem vollständig unterstützt. Umgang mit Datenträgern Beachten Sie folgenden Vorsichtsmaßnahmen, wenn Sie Karten handhaben. Biegen oder verdrehen Sie die Karten nicht. Lassen Sie eine Karte auf keinen Fall mit Flüssigkeiten in Berührung kommen, und lagern Sie sie nicht in feuchter Umgebung.
C870/C870D/L870/L870D/L875/L875D 1. 2. 3. Halten Sie das Speichermedium so, dass die Kontakte (metallene Bereiche) nach unten zeigen. Stecken Sie das Speichermedium in den Speichermediensteckplatz auf der Vorderseite des Computers. Drücken Sie das Speichermedium vorsichtig, um eine sichere Verbindung herzustellen. Das Speichermedium ragt etwas aus dem Steckplatz heraus. Abbildung 3-11 Einsetzen von Speichermedien 1 2 1. Speichermediensteckplatz 2.
C870/C870D/L870/L870D/L875/L875D Nehmen Sie miniSD-/microSD-Karten nicht ohne den Adapter aus dem Speichermediensteckplatz. Zusätzliche Speichermodule Sie können zusätzlichen Speicher im Computer installieren, um den verfügbaren Systemspeicher zu erhöhen. In diesem Abschnitt wird beschrieben, wie Sie optionale Speichermodule installieren und entfernen. Legen Sie ein Tuch unter den Computer, um zu verhindern, dass die Außenseite des Bildschirms verkratzt wird, wenn Sie den Speicher auswechseln.
C870/C870D/L870/L870D/L875/L875D 1. 2. 3. 4. 5. 6. Schalten Sie den Computer aus und achten Sie darauf, dass die Power-LED aus ist (siehe Abschnitt Ausschalten des Computers in Kapitel 1, „Erste Schritte“). Entfernen Sie den Netzadapter und alle an den Computer angeschlossenen Kabel und Peripheriegeräte. Schließen Sie den Bildschirm. Legen Sie den Computer mit der Unterseite nach oben hin und nehmen Sie den Akku heraus (siehe Abschnitt Ersetzen des Akkus in Kapitel 5 „Stromversorgung und Startmodi“).
C870/C870D/L870/L870D/L875/L875D 7. Richten Sie die Kerbe am Speichermodul mit der am Sockel aus und setzen Sie das Modul vorsichtig in einem 30-Grad-Winkel in den Sockel, bevor Sie es nach unten drücken, bis die seitlichen Laschen einrasten. Abbildung 3-13 Speichermodul einsetzen 2 1 3 1. Nut 2. Sockel B 3. Sockel A Darstellung kann je nach Modell abweichen. Achten Sie darauf, dass keine Gegenstände aus Metall, wie z. B. Heftoder Büroklammern, in das Innere des Computers gelangen.
C870/C870D/L870/L870D/L875/L875D 8. Setzen Sie die Speichermodul-Abdeckung ein und sichern Sie sie mit der Schraube. Achten Sie darauf, dass die Speichermodul-Abdeckung fest geschlossen ist. Abbildung 3-14 Speichermodulabdeckung einsetzen 2 1 1. Speichermodulabdeckung 2. Schraube Darstellung kann je nach Modell abweichen. 9. Einsetzen des Akkus – Nähere Informationen finden Sie im Abschnitt Ersetzen des Akkus in Kapitel 5, Stromversorgung und Startmodi. 10. Drehen Sie den Computer um. 11.
C870/C870D/L870/L870D/L875/L875D 7. 8. Drücken Sie die Klammern vom Modul weg, um es freizugeben. Eine Seite des Speichermoduls wird etwas nach oben geschoben. Fassen Sie das Modul an den Kanten und nehmen Sie es aus dem Computer. Nach längerer Verwendung des Computers werden die Speichermodule und die Schaltkreise neben den Speichermodulen sehr warm. Lassen Sie die Speichermodule auf Zimmertemperatur abkühlen, bevor Sie sie ersetzen. Andernfalls können Sie sich leichte Verbrennungen zuziehen.
C870/C870D/L870/L870D/L875/L875D Abbildung 3-16 Monitorkabel an den Anschluss für einen externen RGBMonitor anschließen 1 2 1. Anschluss für einen externen RGB- 2. Monitorkabel Monitor Am Anschluss für einen externen RGB-Monitor am Computer befinden sich keine Gewindebuchsen zur Verschraubung des Monitorkabels. Kabel von externen Monitoren, die über Befestigungsschrauben verfügen, können jedoch trotzdem verwendet werden. 2. Schalten Sie den externen Monitor ein.
C870/C870D/L870/L870D/L875/L875D Da die Funktionsfähigkeit des HDMI-Anschlusses nicht mit allen Anzeigegeräten getestet werden konnte, können einige HDMIAnzeigegeräte möglicherweise nicht verwendet werden. (HDMI=HighDefinition Multimedia Interface) Verbindung mit dem HDMI-Ausgang 1. 2. Stecken Sie ein Ende des HDMI-Kabels in den HDMI-Eingang des HDMI-Anzeigegeräts. Stecken Sie das andere Ende des HDMI-Kabels in den HDMIAnschluss des Computers. Abbildung 3-17 Verbindung mit dem HDMI-Ausgang 1 2 1.
C870/C870D/L870/L870D/L875/L875D 3. Um die internen Lautsprecher des Computers zu verwenden, wählen Sie Lautsprecher. Um das Fernseher oder den externen Monitor zu verwenden, den Sie an den Computer angeschlossen haben, wählen Sie ein anderes Wiedergabegerät. 4. Klicken Sie auf die Schaltfläche Standard, falls diese verfügbar ist. 5. Klicken Sie auf OK, um das Dialogfeld Sound zu schließen.
C870/C870D/L870/L870D/L875/L875D Befestigen des Sicherheitsschlosses So befestigen Sie ein Sicherherheitsseil am Computer: 1. 2. Drehen Sie den Computer so, dass Ihnen die rechte Seite zugewandt ist. Richten Sie das Sicherheitsseil an dem dafür vorgesehenen Schlitz aus und befestigen Sie es. Abbildung 3-18 Sicherheitsschloss 1 2 1. Schlitz für ein Sicherheitsschloss 2.
C870/C870D/L870/L870D/L875/L875D Um das Dienstprogramm Volume Mixer zu starten, klicken Sie mit der rechten Maustaste auf das Lautsprechersymbol in der Taskleiste und wählen Sie Volume Mixer öffnen aus dem Menü. Verschieben Sie den Schieberegler Lautsprecher, um die Lautstärke der Lautsprecher oder des Kopfhörers zu regeln. Um die Lautstärke einer Anwendung zu regeln, verschieben Sie den Schieberegler für diese Anwendung.
C870/C870D/L870/L870D/L875/L875D Standardausgabegerät. Microphone (Mikrofon) ist das Standardeingabegerät. Um das Standardgerät zu ändern, klicken Sie auf der ausgewählten Geräte-Registerkarte auf Set Default Device (Standardgerät festlegen). Informationen , um Informationen zur Hardware, Klicken Sie auf die Info-Schaltfläche zur Software und zur Spracheinstellung anzuzeigen. Energieverwaltung Der Audio-Controller im Computer kann ausgeschaltet werden, wenn die Audiofunktion nicht aktiv ist.
C870/C870D/L870/L870D/L875/L875D Umgang mit dem Computer In diesem Abschnitt wird die Pflege und Wartung des Computers beschrieben. Reinigung des Computers Damit Sie Ihren Computer lange und störungsfrei benutzen können, sollten Sie darauf achten, dass er frei von Staub und Schmutz bleibt, und Sie sollten Flüssigkeiten in seiner Nähe mit großer Vorsicht handhaben. Verschütten Sie keine Flüssigkeit über den Computer.
C870/C870D/L870/L870D/L875/L875D Verwenden Sie immer eine geeignete Tragetasche zum Transport des Computers. Halten Sie den Computer beim Tragen gut fest, damit er nicht herunterfällt. Halten Sie den Computer beim Tragen nicht an Teilen fest, die aus dem Gehäuse herausragen. Schutz vor Überhitzung Zum Schutz vor Überhitzung verfügt der Prozessor über einen eingebauten Temperatursensor, der bei Bedarf einen Lüfter aktiviert oder die CPUTaktfrequenz herabsetzt.
C870/C870D/L870/L870D/L875/L875D Kapitel 4 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zum Betrieb der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder README.
C870/C870D/L870/L870D/L875/L875D Beim Systemstart im Hi-Speed Start-Modus gelten einige Einschränkungen für die Einstellungen im BIOS-Setup. Falls Sie das BIOS-Setup aufrufen müssen, verwenden Sie nicht den Hi-Speed Start-Modus. Führen Sie das BIOS-Setup aus, nachdem Sie Windows einmal heruntergefahren haben. Beenden Sie vor dem Aktivieren des Hi-Speed Start-Modus alle geöffneten Programme.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Assist TOSHIBA Assist ist eine grafische Benutzeroberfläche für den schnellen Zugriff auf spezifische Tools, Utilitys und Anwendungen, die die Verwendung und Konfiguration des Computers erleichtern. Klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Support & Wiederherstellung -> TOSHIBA Assist , um dieses Utility aufzurufen. TOSHIBA eco Utility Dieser Computer ist mit dem „ecoModus“ ausgestattet.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Blu-ray Disc Player Diese Software dient zur Wiedergabe von Blu-ray Discs™. Sie verfügt über eine Bildschirmsteuerung und verschiedene Funktionen. Um das Utility zu starten, klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Medien & Unterhaltung -> TOSHIBA Blu-ray Disc Player.
C870/C870D/L870/L870D/L875/L875D TOSHIBA Media Con- Mit dieser Anwendung können Sie Ihre troller Musikdateien, Bilder und Videos steuern, indem Sie Inhalte an ein beliebiges kompatibles Gerät streamen. Klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Medien & Unterhaltung -> TOSHIBA Media Controller, um dieses Utility aufzurufen. Weitere Informationen finden Sie in der Hilfe von TOSHIBA Media Controller.
C870/C870D/L870/L870D/L875/L875D Automatische FestMit dieser Funktion wird die Stromversorgung plattenabschaltung *1 des Festplattenlaufwerks unterbrochen, wenn über einen festgelegten Zeitraum nicht darauf zugegriffen wurde. Sobald das nächste Mal auf die Festplatte zugegriffen wird, wird die Stromversorgung wieder hergestellt. Diese können Sie in den Energieoptionen festlegen.
C870/C870D/L870/L870D/L875/L875D Ruhezustand Wenn diese Funktion aktiviert ist, können Sie den Computer ausschalten, ohne die geöffneten Anwendungen schließen zu müssen. Der Inhalt des Arbeitsspeichers wird automatisch auf der Festplatte gespeichert. Wenn Sie den Computer wieder einschalten, können Sie direkt dort mit der Arbeit fortfahren, wo Sie sie unterbrochen haben. Lesen Sie dazu den Abschnitt Ausschalten des Computers in Kapitel 1, „Erste Schritte“.
C870/C870D/L870/L870D/L875/L875D Schlaf- und Ladefunktion Ihr Computer kann den USB-Anschluss auch dann mit USB Bus Power (DC 5 V) versorgen, wenn der Computer ausgeschaltet ist. Der Begriff „ausgeschaltet“ schließt den Energiesparmodus, den Ruhezustand und den vollständig ausgeschalteten Zustand ein. Diese Funktion kann für Anschlüsse verwendet werden, die die Schlaf- und Ladefunktion unterstützen. Der Anschluss mit dem Symbol ( Ladefunktion.
C870/C870D/L870/L870D/L875/L875D Wenn die Schlaf- und Ladefunktion aktiviert ist, kann die USBReaktivierungsfunktion für kompatible Anschlüsse nicht verwendet werden. Schließen Sie in diesem Fall die Maus oder die Tastatur an einen USB-Anschluss an, der nicht mit dem Kompatibilitätssymbol für die Schlaf- und Ladefunktion gekennzeichnet ist. Wenn alle USBAnschlüsse mit dem Symbol für die Schlaf- und Ladefunktion versehen sind, deaktivieren Sie die Schlaf- und Ladefunktion.
C870/C870D/L870/L870D/L875/L875D Akkueinstellungen Mit diesem Utility können Sie die untere Grenze der verbleibenden Akkuenergie für die Schlaf- und Ladefunktion festlegen. Bewegen Sie den Schieberegler, um die untere Grenze zu verschieben. Wenn die verbleibende Akkubetriebszeit unter den Grenzwert fällt, wird die Schlafund Ladefunktion beendet. Wenn Sie das Kontrollkästchen „Bei Akkubetrieb aktivieren“ deaktivieren, werden die Geräte nur dann aufgeladen, wenn der Netzadapter angeschlossen ist.
C870/C870D/L870/L870D/L875/L875D Um das Passwort manuell einzugeben, gehen Sie wie nachstehend beschrieben vor: 1. Schalten Sie den Computer ein wie in Kapitel 1, Erste Schritte beschrieben. Es erscheint folgende Meldung auf dem Bildschirm: Passwort eingeben [ ] Zu diesem Zeitpunkt funktionieren die Hotkeys nicht. Sie können erst nach der Eingabe des Passworts verwendet werden. 2. 3. Geben Sie das Passwort ein. Drücken Sie ENTER.
C870/C870D/L870/L870D/L875/L875D Einige Optionen werden in Grau angezeigt; sie können nicht bearbeitet werden, sondern zeigen nur den jeweiligen Status an. Allgemein Auf dieser Registerkarte wird die BIOS/EC-Version angezeigt, außerdem enthält sie die Schaltflächen Standard und Info. Standard Setzt alle HW Setup-Werte auf die werkseitigen Einstellungen zurück. Info Zeigt die HW Setup-Version an. Einrichtung In diesem Feld wird die installierte BIOS-Version, das Datum und die ECVersion angezeigt.
C870/C870D/L870/L870D/L875/L875D So löschen Sie ein Benutzerpasswort: 1. 2. 3. Wählen Sie Nicht eingetragen, um die folgende Eingabeaufforderung aufzurufen: Passwort eingeben: Geben Sie das zurzeit gültige Passwort ein. Die Zeichen werden nur als Sternchen angezeigt. Klicken Sie auf OK.
C870/C870D/L870/L870D/L875/L875D Bootreihenfolge wird angezeigt. Verändern Sie die Reihenfolge der Laufwerke mit den Pfeiltasten nach oben und nach unten. So ändern Sie das Startlaufwerk: 1. 2. Drücken Sie F12 und starten Sie den Computer. Wenn der Bildschirm TOSHIBA Leading Innovation>>> angezeigt wird, lassen Sie die Taste F12 los. Wählen Sie mit den Nach-oben- und Nach-unten-Cursortasten das gewünschte Bootlaufwerk aus und drücken Sie Enter.
C870/C870D/L870/L870D/L875/L875D Tastatur Auf dieser Registerkarte können Sie die Einstellungen für die Tastatur vornehmen. Funktionstastenmodus (ohne Drücken von FN) Mit dieser Option können Sie den Modus für die Funktionstasten festlegen. Informationen zu den Hotkeyfunktionen finden Sie im Abschnitt Hotkeys in Kapitel 3, Grundlagen der Bedienung. Sonderfunktionsmodus Drücken Sie nur die jeweilige Funktionstaste, um Sonderfunktionen zu verwenden.
C870/C870D/L870/L870D/L875/L875D Aktiviert Aktiviert den internen USB3.0-Controller. (Standard) Deaktiviert Deaktiviert den internen USB 3.0-Controller. LAN Reaktivierung durch LAN Mit dieser Funktion kann der Computer eingeschaltet werden, wenn ein Reaktivierungspaket (Magic Packet) vom LAN empfangen wird. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen Sie deshalb den Netzadapter angeschlossen, wenn Sie diese Funktion verwenden möchten.
C870/C870D/L870/L870D/L875/L875D SATA-Schnittstelleneinstellung Mit dieser Funktionen können Sie die SATA-Schnittstelleneinstellung festlegen. Leistung HDD/SSD arbeiten mit maximaler Leistung. (Standard) Akkulaufzeit HDD/SSD arbeiten im Akkuschonungsmodus. Mit dieser Einstellung verschlechtert sich die Leistung etwas.
C870/C870D/L870/L870D/L875/L875D Weise. Es gelten die Bedingungen und Einschränkungen der standardmäßigen eingeschränkten Garantie von TOSHIBA. Starten von TOSHIBA PC Health Monitor TOSHIBA PC Health Monitor kann auf folgende Weise gestartet werden: Klicken Sie auf Start -> Alle Programme -> TOSHIBA -> Support & Wiederherstellung -> PC Health Monitor. Klicken Sie auf das Symbol ( ) im Infobereich der Taskleiste und dann auf die Meldung „Enable PC Health Monitor...
C870/C870D/L870/L870D/L875/L875D Optionen für die Systemwiederherstellung Bei Lieferung ist die Funktion „Systemwiederherstellungsoptionen“ werkseitig installiert. Das Menü mit den Systemwiederherstellungsoptionen enthält Tools zum Beheben von Startproblemen, zum Ausführen von Diagnosetests und zum Wiederherstellen des Systems. In der Windows-Hilfe finden Sie nähere Informationen zum Beheben von Startproblemen.
C870/C870D/L870/L870D/L875/L875D Verwenden Sie keine Festplatten-Utilitys, zum Beispiel Programme zur Beschleunigung des Festplattenzugriffs. Dies könnte zu Instabilität und Datenverlusten führen. Fahren Sie den Computer nicht herunter, melden Sie sich nicht ab und verwenden Sie nicht den Energiesparmodus oder Ruhezustand, wenn Sie Medien beschreiben oder wiederbeschreiben.
C870/C870D/L870/L870D/L875/L875D Wenn Sie den Ton ausgeschaltet haben, schalten Sie ihn vor Beginn des Wiederherstellungsprozesses wieder ein, um die akustischen Signale hören zu können. Weitere Informationen finden Sie im Abschnitt Tastatur in Kapitel 3, „Grundlagen der Bedienung“. Sie können die Systemwiederherstellungsoptionen nicht verwenden, wenn Sie die vorinstallierte Software ohne Systemwiederherstellungsoptionen wiederherstellen.
C870/C870D/L870/L870D/L875/L875D Wiederherstellen der vorinstallierten Software vom Recovery-Festplattenlaufwerk Ein Teil des Festplattenspeichers ist als verborgene Wiederherstellungspartition konfiguriert. In dieser Partition sind Dateien gespeichert, mit denen sich die vorinstallierte Software bei Problemen reparieren lässt.
C870/C870D/L870/L870D/L875/L875D Kapitel 5 Stromversorgung und Startmodi Zu den Stromversorgungskomponenten des Computers gehören der Netzadapter, der Hauptakku und die internen Akkus. In diesem Kapitel wird erläutert, wie Sie welche Energieressourcen am effektivsten nutzen und die Akkus laden. Darüber hinaus erhalten Sie hier Tipps zum Sparen von Akkuenergie und Informationen zu den verschiedenen Startmodi.
C870/C870D/L870/L870D/L875/L875D Computer eingeschaltet Computer ausgeschaltet (kein Betrieb) Kein Netzadapter angeschlos sen Verbleibende Ladung des Akkus liegt über dem Schwellenwert • Computer in Betrieb • LED: aus Verbleibende • Computer in Ladung des Betrieb Akkus liegt unter • LED: blinkt gelb dem Schwellenwert Akku ist leer Computer schaltet sich ab Überwachen der Stromversorgungsbedingungen Wie aus der folgenden Tabelle deutlich wird, zeigen die LEDs DC IN/Akku und Power die Funktionsfähigke
C870/C870D/L870/L870D/L875/L875D Wenn sich der Akku beim Aufladen überhitzt, wird der Ladevorgang unterbrochen und die LED DC IN/Akku erlischt. Wenn die Akkutemperatur wieder im normalen Bereich liegt, wird der Akku weiter aufgeladen, unabhängig davon, ob der Computer ein- oder ausgeschaltet ist. „Power“-LED Anhand der Anzeige Power lässt sich der Status der Stromversorgung des Computers überprüfen.
C870/C870D/L870/L870D/L875/L875D Echtzeituhr-Akku (RTC-Akku) Der RTC-Akku (RTC = Real Time Clock; Echtzeituhr) versorgt die eingebaute Echtzeituhr und den Kalender mit Energie. Außerdem speichert er die Systemkonfiguration, wenn der Computer ausgeschaltet ist. Ist der RTC-Akku vollständig entladen, gehen diese Systemdaten verloren und die Echtzeituhr und der Kalender arbeiten nicht mehr. Sie können die RTC-Einstellungen im BIOS-Setup ändern.
C870/C870D/L870/L870D/L875/L875D Entfernen Sie den Akku nicht, während die Wake-on-LAN-Funktion aktiviert ist. Dabei können Daten verloren gehen. Deaktivieren Sie die Wake-onLAN-Funktion, bevor Sie den Akku aus dem Computer nehmen. Aufladen des Akkus Wenn die Leistung des Akkus nachlässt, blinkt die LED DC IN/Akku gelb, wodurch angezeigt wird, dass die Akkuenergie nur noch für wenige Minuten ausreicht.
C870/C870D/L870/L870D/L875/L875D Computers abhängig. Wenn Sie z. B. externe Geräte stark nutzen, wird der Akku während des Betriebs möglicherweise kaum aufgeladen. Hinweise zum Aufladen des Akkus Unter folgenden Bedingungen kann sich das Laden des Akkus verzögern: Der Akku ist extrem heiß oder kalt (wenn der Akku zu heiß ist, wird er möglicherweise gar nicht aufgeladen).
C870/C870D/L870/L870D/L875/L875D Nach häufigen Ent- und Aufladungen nimmt die Kapazität eines Akkus allmählich ab. Deshalb hat ein alter, häufig benutzter Akku eine kürzere Betriebszeit als ein neuer Akku, auch wenn beide vollständig aufgeladen sind. Maximieren der Akkubetriebszeit Die Leistungsfähigkeit eines Akkus zeigt sich daran, wie lange er nach einem Ladevorgang Energie zur Verfügung stellen kann.
C870/C870D/L870/L870D/L875/L875D Akkutyp Energiesparmodus Beenden-Modus Akku ca. 5.1 Tage ca. 8 Monate (66 Wh, 6 Zellen, hohe Kapazität) Verlängern der Akkulebensdauer So maximieren Sie die Lebensdauer der Akkus: Trennen Sie den Computer mindestens einmal im Monat von der Steckdose und lassen Sie ihn im Akkubetrieb laufen, bis der Akku vollständig entladen ist. Führen Sie zuvor die folgenden Schritte aus: 1. Schalten Sie den Computer aus. 2.
C870/C870D/L870/L870D/L875/L875D In diesem Abschnitt erfahren Sie, wie der alte Akku entfernt und der neue Akku eingesetzt wird. Zuerst werden die Schritte für das Entfernen beschrieben. Nehmen Sie den Akku nicht aus dem Computer, während der Energiesparmodus aktiviert ist. Die Daten im Arbeitsspeicher könnten andernfalls verloren gehen. Im Ruhezustand gehen die Daten verloren, wenn Sie den Akku entfernen oder den Netzadapter abtrennen, bevor der Speichervorgang abgeschlossen ist.
C870/C870D/L870/L870D/L875/L875D Abbildung 5-2 Akku entsichern -2 1. Akkuverriegelung 2. Akkufreigabe 3. Akku Installieren des Akkus So setzen Sie einen Akku ein: Berühren Sie nicht den Akkufreigabehebel, während Sie den Computer halten. Sie könnten den Akku versehentlich entriegeln und sich durch den herausfallenden Akku verletzen. 1. 2. 3. Stecken Sie den Akku soweit wie möglich in den Computer.
C870/C870D/L870/L870D/L875/L875D LCD-gesteuerte Ein-/Ausschaltung Der Computer kann so eingestellt werden, dass er beim Schließen des Bildschirms automatisch ausgeschaltet und wieder eingeschaltet wird, wenn Sie ihn wieder öffnen. Diese Funktion ist nur im Energiesparmodus oder Ruhezustand verfügbar, jedoch nicht im Beenden-Modus.
C870/C870D/L870/L870D/L875/L875D Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Jeder Benutzer sollte sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden.
C870/C870D/L870/L870D/L875/L875D Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert sind und das alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen.
C870/C870D/L870/L870D/L875/L875D Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Falls Sie ein Softwarepaket nicht laden können, kann der Datenträger beschädigt oder das Programm fehlerhaft sein. Versuchen Sie, eine andere Kopie der Software zu laden. Wird bei Verwendung eines Softwarepakets eine Fehlermeldung ausgegeben, schlagen Sie in der mitgelieferten Dokumentation nach.
C870/C870D/L870/L870D/L875/L875D 3. 4. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen. Andernfalls fahren Sie mit dem nächsten Schritt fort. Schließen Sie alle noch geöffneten Programme, indem Sie sie nacheinander auswählen und jeweils auf Task beenden klicken. Nachdem Sie alle Programme geschlossen haben, sollten Sie Ihre Arbeit fortsetzen können.
C870/C870D/L870/L870D/L875/L875D Systemabschaltung wegen Überhitzung Wenn die Temperatur des Prozessors trotz der Kühlungsmaßnahmen zu heiß wird, schaltet sich das System automatisch ab, um Schäden zu verhindern. Die Daten im Arbeitsspeicher gehen verloren. Problem Vorgehensweise Computer fährt automatisch herunter. Lassen Sie den Computer ausgeschaltet abkühlen, bis er Zimmertemperatur erreicht hat.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Akku wird nicht aufgeladen, wenn der Netzadapter angeschlossen ist Ist der Akku vollständig entladen, lädt er sich nicht sofort wieder auf. Warten Sie einige Minuten, bis Sie es erneut versuchen. Wenn Sie den Akku immer noch nicht laden können, prüfen Sie, ob die Steckdose des Netzadapters Strom liefert. Schließen Sie dazu ein anderes Gerät daran an. Überprüfen Sie, ob sich der Akku heiß oder kalt anfühlt.
C870/C870D/L870/L870D/L875/L875D RTC (Echtzeituhr) Problem Vorgehensweise Die BIOSEinstellung und Systemdatum/uhrzeit sind verloren gegangen Der RTC-Akku ist entladen. Gehen Sie folgendermaßen vor, um das Datum und die Uhrzeit im BIOS-Setup einzustellen: 1. 2. 3. 4. 5. Halten Sie die Taste F2 gedrückt und schalten Sie den Computer ein. Das BIOS-Setup wird gestartet. Stellen Sie das Datum im Feld Systemdatum ein. Stellen Sie die Uhrzeit im Feld Systemzeit ein.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Abdrücke auf dem Bildschirm Möglicherweise haben die Tastatur oder das Touchpad den Bildschirm berührt, während er geschlossen war. Versuchen Sie, die Abdrücke durch vorsichtiges Abwischen des Bildschirms mit einem sauberen trockenen Tuch zu entfernen. Verwenden Sie, falls dies nicht funktioniert, einen hochwertigen LCD-Bildschirmreiniger.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Kein Zugriff auf CD/ DVD/Blu-ray™ DVD im Laufwerk Überprüfen Sie, ob die Laufwerklade sicher geschlossen ist. Schieben Sie sie vorsichtig nach hinten, bis sie einrastet. Öffnen Sie die Lade und prüfen Sie, ob die Disc richtig eingelegt wurde. Sie sollte ganz gerade und mit der beschrifteten Seite nach oben liegen. Ein Fremdkörper in der Lade könnte das Lesen der Disc verhindern. Überprüfen Sie, ob ein Fremdkörper vorhanden ist.
C870/C870D/L870/L870D/L875/L875D Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Überprüfen Sie die Geräteeinstellungen. Klicken Sie dazu auf Start -> Systemsteuerung -> Hardware und Sound -> Maus. Drücken Sie den Hotkey zum Aktivieren. Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut.
C870/C870D/L870/L870D/L875/L875D USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Der Akku entlädt sich schnell, selbst wenn der Computer ausgeschaltet ist. Wenn die Schlaf- und Ladefunktion aktiviert ist, entlädt sich der Akku des Computers im Ruhezustand oder wenn der Computer ausgeschaltet ist. Schließen Sie den Netzadapter an den Computer an oder deaktivieren Sie die Schlaf- und Ladefunktion. An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Es wird kein Ton ausgegeben. Drücken Sie die Hotkeys zum Erhöhen oder Verringern der Lautstärke. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie, ob die Mute-Funktion (Ton aus) aktiviert wurde Überprüfen Sie die Kopfhörerverbindung. Überprüfen Sie im Windows-Geräte-Manager, dass das Audiogerät aktiviert ist und ordnungsgemäß arbeitet.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit den Hotkeys das aktive Anzeigegerät, sodass nicht das interne LCD verwendet wird. Überprüfen Sie, dass der externe Monitor angeschlossen ist.
C870/C870D/L870/L870D/L875/L875D Problem Vorgehensweise Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Lassen sich die Probleme nicht beheben, wenden Sie sich an den LAN-Administrator. Wireless LAN Wenn Sie den LAN-Zugriff mit den folgenden Schritten nicht herstellen können, wenden Sie sich an Ihren LAN-Administrator.
C870/C870D/L870/L870D/L875/L875D Bevor Sie anrufen Da die Probleme vom Betriebssystem oder von der Software, die Sie verwenden, verursacht werden können, sollten Sie zuerst andere Hilfequellen konsultieren. Bevor Sie sich an TOSHIBA wenden, sollten Sie Folgendes versuchen: Sehen Sie sich die Abschnitte zur Fehlerbehebung in den Dokumentationen zu Ihrer Software und zu den Peripheriegeräten an.
C870/C870D/L870/L870D/L875/L875D Anhang A Technische Daten In diesem Anhang werden die technischen Daten des Computers zusammengefasst. Maße und Gewicht Größe Ca. 413 mm x 268 mm x 30/34 mm (B x T x H) (überstehende Teile nicht eingeschlossen). Die physischen Abmessungen sind modellabhängig.
C870/C870D/L870/L870D/L875/L875D Pinbelegung beim Anschluss für einen externen RGB-Monitor 5 1 15 11 10 6 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Datensignal I/O 13 HSYNC Horizontales Sync-Signal O 14
C870/C870D/L870/L870D/L875/L875D Anhang B Netzkabel und Netzstecker Der Stecker des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird. Alle Netzkabel müssen folgenden Spezifikationen entsprechen: Leiterquerschnitt: Minimum 0,75 mm2 Nennstromstärke: Minimum 2,5 Ampere Sicherheitsstandards China: CQC USA und Kanada: UL-gelistet und CSA-zertifiziert Nr.
C870/C870D/L870/L870D/L875/L875D U.S. National Electrical Code Handbook und Canadian Electrical Code Part II definiert. Die folgenden Abbildungen zeigen die Steckerformen für die USA und Kanada, Großbritannien, Australien, Europa und China.
C870/C870D/L870/L870D/L875/L875D Anhang C Rechtliche Hinweise In diesem Kapitel werden rechtliche Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Nicht verwendete Symbole Die Gehäuse von Computern sind häufig so konstruiert, dass alle innerhalb einer Produktserie möglichen Konfigurationen darin untergebracht werden können. Das Modell Ihrer Wahl bietet deshalb unter Umständen nicht alle Funktionen und Spezifikationen, für die sich Symbole oder Schalter am Computer-Gehäuse befinden.
C870/C870D/L870/L870D/L875/L875D Schutzfunktion, die das Risiko von Datenverlusten oder Geräteschäden bei Verwendung des Computers außerhalb der empfohlenen Bedingungen verringern soll. Um Datenverlust zu vermeiden, sollten Sie in regelmäßigen Abständen Sicherungskopien (Backups) Ihrer Daten erstellen und auf einem externen Speichermedium speichern. Die optimale Leistung erzielen Sie, wenn Sie den Computer unter den empfohlenen Betriebsbedingungen verwenden.
C870/C870D/L870/L870D/L875/L875D Speicher anzeigen, stehen dem Betriebssystem trotzdem nur ca. 3 GB Speicher zur Verfügung. Computer mit einem 64-Bit-Betriebssystem können 4 GB oder mehr Systemspeicher ansprechen. Akkulaufzeit Die Akkulaufzeit kann je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen erheblich variieren, dazu tragen auch die normalen Leistungsschwankungen aufgrund der Bauweise einzelner Komponenten bei.
C870/C870D/L870/L870D/L875/L875D variiert in Abhängigkeit von der Größe des Systemspeichers und anderen Faktoren. Wireless LAN Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN kann variieren. Sie hängt von folgenden Faktoren ab: elektromagnetische Umgebung, Hindernissen, Aufbau und Konfiguration des Zugangspunktes sowie Aufbau des Clients und Software/Hardware-Konfiguration. Die tatsächliche Übertragungsgeschwindigkeit wird unter dem theoretischen Maximum liegen.
C870/C870D/L870/L870D/L875/L875D Anhang D Informationen zu drahtlosen Geräten Wireless-LAN-Interoperabilität Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.11 Standard für Wireless LANs (Revision a/b/g/n oder b/g/n) wie vom Institute of Electrical and Electronics Engineers definiert und genehmigt.
C870/C870D/L870/L870D/L875/L875D Wenn Sie Fragen zur Verwendung der Wireless-LAN- oder BluetoothModule von TOSHIBA haben, besuchen Sie http:// www.pc.support.global.toshiba.com. In Europa können Sie die Website http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm konsultieren. Ihr Bluetooth-Produkt ist nicht mit Geräten kompatibel, die BluetoothSpezifikationen Version 1.0B verwenden.
C870/C870D/L870/L870D/L875/L875D Europa Eingeschränkte Verwendung der 2400,0-2483,5-MHzFrequenzen in Europa Frankreich: Verwendung im Freien begrenzt auf 10 m W.e.i.r.p. innerhalb der Frequenz 2454-2483,5 MHz Nutzung für militärische Funkortung. Die Flexibilisierung des 2,4-GHz-Frequenzbands („Refarming“) wurde in den letzten Jahren vorangetrieben, um die aktuelle gelockerte Regulierung zu ermöglichen. Vollständige Umsetzung für 2012 geplant.
C870/C870D/L870/L870D/L875/L875D Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2. Zur Verwendung für lokale Netzwerke zur Kommunikation von Bordbesatzungen im Bereich des Flughafens und während aller Flugphasen zugelassen. Zur Verwendung für öffentlich zugängliche lokale Netzwerke an Bord von Flugzeigen während des Flugs in Flughöhen über 3000 m zugelassen.
C870/C870D/L870/L870D/L875/L875D Um den europäischen Gesetzen zum Betrieb von Wireless LANs zu entsprechen, gelten die obigen Einschränkungen für die Verwendung der 2,4- und 5-GHz-Kanäle nur für den Betrieb im Freien. Überprüfen Sie bitte mithilfe der Wireless LAN Utility, welcher Kanale jeweils für den Betrieb verwendet wird.
C870/C870D/L870/L870D/L875/L875D Vorsicht: Bestimmungen bezüglich Störungen durch hochfrequente Felder Wegen der Verwendung des Frequenzbereichs zwischen 5,15 und 5.25 GHz darf dieses Gerät nur im Indoor-Bereich (d. h. in Gebäuden) benutzt werden. Taiwan Artikel 12 Ohne Genehmigung von der DGT darf kein Unternehmen oder Benutzer bei einer zugelassenen Niedrigenergiefunkeinrichtung die Frequenz ändern, die Übertragungsstärke ändern oder die ursprünglichen Merkmale und die Leistung ändern.
C870/C870D/L870/L870D/L875/L875D 1. 2. 3. Vergewissern Sie sich vor der Verwendung dieses Geräts, dass es keine Störungen der oben genannten Einrichtungen verursacht. Falls es durch dieses Gerät zu Störungen anderer Funkstationen kommt, ändern Sie sofort die verwendete Frequenz, wechseln Sie den Standort oder schalten Sie das Gerät aus Wenden Sie sich an einen autorisierten TOSHIBA-Serviceanbieter, wenn es durch dieses Gerät zu Problemen mit sonstigen Funkstationen kommt. 2.
C870/C870D/L870/L870D/L875/L875D Geräteautorisierung Dieses Gerät trägt die Technical Regulation Conformity Certification und gehört zur Geräteklasse von Funkeinrichtungen von NiedrigenergieDatenkommunikationssystemen gemäß den entsprechenden japanischen Gesetzen. Realtek® RTL8188CE Wireless LAN 802.11n PCI-E NIC b/g/n Wireless LAN Name der Funkeinrichtung: RTL8188CE Japanische Behörde für die Zulassung von Telekommunikationseinrichtungen Zulassungsnummer: D100075001 Realtek® RTL8723AE Wireless LAN 802.
C870/C870D/L870/L870D/L875/L875D Verfügbare Kanäle der Peer-to-Peer-Verbindung im Ad-hoc-Modus ist Ch1-Ch11. Die Verbindung mit einem Access Point im Infrastrukturmodus erfolgt über CH1-CH13.
C870/C870D/L870/L870D/L875/L875D Spanien Schweden Schweiz Taiwan Thailand Trinidad und Tobago Tunesien Türkei Uganda Ukraine VAE Großbritannien USA Uruguay Venezuela Vietnam Simbabwe Realtek® RTL8723AE Wireless LAN 802.11n PCI-E NIC b/g/n Wireless LAN und Bluetooth Dieses Gerät ist gemäß den Funkstandards der in der folgenden Tabelle aufgeführten Länder/Gebiete zugelassen. Verwenden Sie dieses Gerät nicht in Gebieten oder Ländern, die in der folgenden Tabelle nicht aufgeführt sind.
C870/C870D/L870/L870D/L875/L875D Mexiko Monaco Marokko Mosambik Namibia Niederlande Norwegen Oman Pakistan PapuaNeuguinea Paraguay Philippinen Polen Portugal Katar Rumänien Russland Saudi-Arabien Senegal Serbien Singapur Slowakei Slowenien Südkorea Spanien Schweden Schweiz Taiwan Thailand Trinidad und Tobago Tunesien Türkei Ukraine VAE Großbritannien USA Uruguay Venezuela Vietnam Simbabwe Länder-/Gebietszulassungen für Atheros WB225 802.
C870/C870D/L870/L870D/L875/L875D Deutschland Griechenland Honduras Ungarn Island Indien Indonesien Irland Israel Italien Jamaika Japan Jordanien Kenia Kuwait Lettland Libanon Liechtenstein Litauen Luxemburg Malaysia Malta Mexiko Marokko Nepal Niederlande Neuseeland Norwegen Oman Pakistan PapuaNeuguinea Paraguay Peru Philippinen Polen Portugal Katar Rumänien Russland Saudi-Arabien Serbien Singapur Slowakei Slowenien Südafrika Südkorea Spanien Schweden Schweiz
C870/C870D/L870/L870D/L875/L875D Bosnien und Herzegowina Brasilien Kambodscha Kanada Chile China Costa Rica Kroatien Zypern Tschechien Dänemark Ecuador Ägypten Estland Finnland Frankreich Deutschland Griechenland Honduras Ungarn Island Indien Indonesien Irland Israel Italien Jamaika Japan Jordanien Kenia Kuwait Lettland Libanon Liechtenstein Litauen Luxemburg Malaysia Malta Mexiko Marokko Nepal Niederlande Neuseeland Norwegen Oman Pakistan PapuaNeuguinea Parag
C870/C870D/L870/L870D/L875/L875D Stichwortverzeich nis A D Akku Echtzeituhr 5-4 Energiesparmodus 4-6 ersetzen 5-8 Kapazität überwachen 5-6 Lebensdauer verlängern 5-8 RTC-Akku 2-11 Typen 5-3 Datenträger für die SoftwareWiederherstellung 4-22 DC IN LED 2-1 DC IN/Akku-LED 5-2 Dokumentationsliste 1-1 Drahtlose Kommunikation 3-27 Anzeige automatische Abschaltung 4-5 Duales Zeigegerät Touchpad 6-10 Anzeigemodus 3-47 DVD-Super-Multi-Laufwerk schreiben 3-10 verwenden 3-6 Audiosystem Probleme 6-13 B E Bilds
C870/C870D/L870/L870D/L875/L875D Funktionstasten 3-2 G N Netzadapter anschließen 1-3 DC IN 19V-Buchse 2-3 zusätzlicher 3-45 Grafikadapter 2-11 Grafikcontroller 2-11 H Neustarten des Computers 1-11 HDD 2-10 HDMI-Ausgang 2-4 Hotkeys 4-5 HW Setup allgemein 4-12 Anzeige 4-13 Boot 4-13 Fenster 4-11 LAN 4-16 öffnen 4-11 SATA 4-17 Tastatur 4-15 USB 4-15 L LAN anschließen 3-31 Kabeltypen 3-31 Probleme 6-15 LCD Scharniere 2-9 Lüftungsschlitze 2-5, 2-6 M MultiMediaCard entfernen 3-36 Benutzerhandbuch P Pass
C870/C870D/L870/L870D/L875/L875D R RecoveryFestplattenlaufwerk 4-22 T Tastatur FN-Einrastfunktion 3-5 Funktionstasten F1...
C870/C870D/L870/L870D/L875/L875D Z Zeigegerät Touchpad 2-9, 3-1 Touchpad-Klicktasten 3-1 Benutzerhandbuch Stichwortverzeichnis-4