® Satellite M110/M115 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 190 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Model: Satellite® M110/M115 Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available.
Critical Applications The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com.
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can.
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. 3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.
Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 72/23/EEC, the EMC Directive 89/336/ EEC and/or the R&TTE Directive 1999/ 05/EEC. This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany.
Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4DSOF4 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3.
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
802.
❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Austria Denmark Germany Italy Netherlands Portugal UK Belgium Finland Greece Liechtenstein New Zealand Sweden USA Turbo Mode (5 GHz) Canada USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
Taiwan Article 14 Article 17 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued.
2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4FH1 (4) 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3.
Optical Drive Safety Instructions The HD DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Never attempt to disassemble, adjust or repair a HD DVD, CD/DVD drive, CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury.
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein. ©2006 by Toshiba America Information Systems, Inc. All rights reserved. Export Administration Regulation This document contains technical data that may be controlled under the U.S.
Trademarks Satellite is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. DirectX, Active Desktop, DirectShow, and Windows Media are registered trademarks of Microsoft Corporation. ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Contents Introduction................................................................................ 34 This guide ...............................................................35 Safety icons ............................................................36 Other icons used...............................................37 Other documentation ..............................................37 Service options .......................................................38 Chapter 1: Getting Started..................
Contents 27 Using the computer for the first time ......................50 Opening the display panel .................................50 Your computer’s features and specifications ....51 Turning on the power .......................................51 Adding memory (optional) ......................................52 Installing a memory module .............................53 Removing a memory module............................58 Checking total memory .....................................
Contents Chapter 2: Learning the Basics................................................. 81 Computing tips .......................................................81 Using the keyboard .................................................83 Character keys .................................................83 Making your keyboard emulate a full-size keyboard .....................................................83 Ctrl, Fn, and Alt keys .........................................84 Function keys..................
Contents 29 Chapter 3: Mobile Computing.................................................105 Toshiba’s energy-saver design..............................105 Running the computer on battery power ..............105 Battery Notice .................................................106 Power management ........................................107 Using additional batteries ...............................107 Charging batteries.................................................108 Charging the main battery............
Contents Internet Service Providers ..............................135 Connecting to the Internet .............................136 Surfing the Internet.........................................137 Internet features..............................................137 Uploading to, and downloading files from, the Internet ..............................................138 Exploring audio features .......................................138 Recording sounds...........................................
Contents 31 Viewing existing key assignments ..................161 Changing or removing existing key assignments ............................................161 TOSHIBA Hotkey Utility ........................................162 TOSHIBA SD™ Memory Card Format Utility .........163 TOSHIBA Power Saver ..........................................164 Preset Power Profiles .....................................165 Quickly creating a new power profile ..............165 Customizing a power profile ..................
Contents Internet problems ...........................................196 The Windows® XP operating system can help you .............................................196 Resolving a hardware conflict ...............................197 A plan of action ...............................................197 Resolving hardware conflicts on your own .....198 Fixing a problem with Device Manager ...........200 Memory problems ..........................................202 Power and the batteries .................
Contents 33 Maintaining security when the battery is not fully charged .......................................236 Power profile .......................................................237 Standby mode.......................................................237 Hibernation mode ................................................238 Display modes ......................................................239 Display brightness ................................................239 Disabling or enabling wireless devices..
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. NOTE 34 This notebook is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Introduction This guide NOTE 35 Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES.
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Other documentation 37 Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text.
Introduction Service options Service options Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba’s standard limited warranty, extended warranty, and service upgrade terms and conditions are available at warranty.toshiba.com. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations. Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.
Getting Started Selecting a place to work ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ❖ Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Getting Started Selecting a place to work 41 Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the enclosed Instruction Manual for Safety and Comfort. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure. ❖ Never turn off the computer if a drive light indicates a drive is active.
Getting Started Selecting a place to work Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Standby mode).
Getting Started Setting up your computer 43 Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 43 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards. Your computer contains a rechargeable main battery that needs to be charged before you can use it.
Getting Started Registering your computer with Toshiba 2 Confirm acceptance of Microsoft’s End User License Agreement and click Next. 3 Select the appropriate option from the Help Protect Your Computer screen and click Next. 4 Enter the computer name and description and click Next or Skip. 5 Select how your computer will connect to the Internet and click Next. The computer will pause for a moment while checking for an Internet connection.
Getting Started Adding optional external devices 45 Failure to complete Product Registration will not diminish Customer rights under the Toshiba limited Warranty. NOTE To register online, you must be connected to the Internet via your computer’s modem (available on certain models) and a voice-grade telephone line, or by a Local Area Network. Adding optional external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software.
Getting Started Connecting to a power source Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computer’s battery. Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.
Getting Started Connecting to a power source 47 Power cord/cable AC adaptor AC adaptor cord (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: 1 Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. 5.375 x 8.
_ + Getting Started Connecting to a power source 2 Plug the AC adaptor cord into the DC-IN on the back of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer 3 Connect the power cord/cable to a live electrical outlet. The AC power and battery lights on the indicator panel glow blue. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
Getting Started Charging the main battery NOTE 49 If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack. See “Changing the main battery” on page 117 for information on replacing the main battery. Charging the main battery Your computer came with its battery already installed.
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 Slide the display latch to the right. 2 Lift the display panel. (Sample Illustration) Opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily and never lift the computer by the display panel.
Getting Started Using the computer for the first time 51 Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide.
Getting Started Adding memory (optional) 3 Press and hold the power button in until the power button and the on/off light on the system indicator panel glow blue—about one second. (Sample Illustration) Turning on the power The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Getting Started Adding memory (optional) 53 Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot. If this happens, let the module cool to room temperature before you replace it. To avoid damaging the computer’s screws, use a small Phillips screwdriver that is in good condition.
Getting Started Adding memory (optional) 4 Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 117. 5 Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Front of computer (Sample Illustration) Locating the memory module slot cover 6 Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover.
Getting Started Adding memory (optional) 55 7 Remove the memory module slot cover. 8 Place the screw and cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems.
Getting Started Adding memory (optional) 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket 12 Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).
Getting Started Adding memory (optional) 57 13 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat steps 12-13.
Getting Started Adding memory (optional) 14 Replace the memory module slot cover and secure it using the screw. 15 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 119. 16 Turn the computer right side up. 17 Reconnect the cables. 18 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer.
Getting Started Adding memory (optional) 59 Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.
Getting Started Adding memory (optional) Memory slots Front of computer (Sample Illustration) Removing the memory module 2 Replace the memory module slot cover and secure it using the screw. 3 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 119. 4 Turn the computer right side up. 5 Reconnect the cables. 6 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Getting Started Using the TouchPad™ 61 Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel, Performance and Maintenance, and then System. 2 The General tab view automatically appears and shows total memory.
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. Scrolling with the TouchPad™ There are two active regions on the TouchPad™ that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the TouchPad. To scroll horizontally, run your finger along the bottom edge of the TouchPad.
Getting Started Using the TouchPad™ 4 63 Click the Device Settings tab. The Device Settings tab view window appears. (Sample Image) Device Settings tab screen 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 240. 5.375 x 8.375 ver 2.
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖ An external monitor or projector via the RGB (monitor) port ❖ A TV, VCR, or DVD recorder via the S-video (TV-out) port (available on certain models) Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting.
Getting Started Using external display devices 65 Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect.
Getting Started Using an external keyboard TECHNICAL NOTE: You can also change these settings using the Display Properties box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and then click Apply or OK.
Getting Started Using a mouse 67 Using a mouse You may want to use a mouse instead of the computer’s builtin TouchPad. You can use a USB-compatible mouse. NOTE After logging on to your system, the mouse cursor may move to the upper-right side of the screen. If this occurs, press the Esc or Windows key to return it to its original position. Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer.
Getting Started Connecting a printer If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page 68. To connect a printer to your computer: 1 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. 2 Plug the printer’s power cable into a live AC outlet. Setting up a printer NOTE Some printers require a specific installation process.
Getting Started Connecting an optional external diskette drive 69 Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. (Sample Illustration) Connecting an optional external USB diskette drive 5.375 x 8.375 ver 2.
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/or drive. It is a good idea to turn off your computer when you are not using it for a while.
Getting Started Turning off the computer ❖ 71 If you have work in progress and are not connected to a network, use the Windows® Standby or Hibernate commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page 75. Standby mode The Standby command places the computer into a powersaving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Getting Started Turning off the computer 73 Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off For Windows® XP Home, or either Windows® XP Professional or Windows® XP MCE when not connected to a domain server, follow these steps to turn off the computer: 1 Click Start, and then Turn off computer. The Turn off computer dialog box appears.
Getting Started Turning off the computer Turning off the computer more quickly You can also turn off the computer by pressing the power button. To use this method, you first need to activate it using Toshiba’s Power Saver utility. 1 Click Start, Control Panel, and then Performance and Maintenance. 2 Click the TOSHIBA Power Saver icon. 3 Click on the Setup Action tab. (Sample Image) Setup action settings screen 4 Select the options you want from the drop-down lists.
Getting Started Turning off the computer 5 Click Apply. 6 Click OK. NOTE 75 For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 164. Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set. Restarting your computer To start the computer up again, press the power button until the power button and the on/off light glow blue.
Getting Started Turning off the computer Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Click Start, Control Panel, and then Performance and Maintenance. 2 Click the TOSHIBA Power Saver icon.
Getting Started Turning off the computer 77 Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the power button and the on/off light glow blue. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Getting Started Turning off the computer To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Click Start, Control Panel, and then Performance and Maintenance. 2 Click the TOSHIBA Power Saver icon. 3 Click the Setup Action tab. 4 Select Standby for the options you want. ❖ When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button.
Getting Started Caring for your computer 79 Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Taking care of your battery” on page 120. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings.
Getting Started Caring for your computer Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: 1 Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See “Saving your work” on page 89 for further information.
Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. ❖ Scan all new files for viruses.
Learning the Basics Using the keyboard 83 Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys, providing all the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page.
Learning the Basics Using the keyboard Your computer’s keyboard has only one Enter and one Ctrl key. Most of the time, this does not matter. However, some programs assign separate functions to the right and left Ctrl and Alt keys, or to the regular and numeric pad Enter keys on the full-sized keyboard. Using the Fn key, you can simulate these separate keys, as follows: ❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard.
Learning the Basics Using the keyboard 85 Windows special keys Windows key Application key (Sample Illustration) Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Windows key—Opens the Start menu ❖ Application key—Has a similar function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. To disable the numeric overlay, hold down the Fn key and press F11 again. The numeric mode light on the keyboard indicator panel goes out.
Learning the Basics Starting a program 87 The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows® WordPad program as an example: 1 Click Start, and then All Programs.
Learning the Basics Starting a program 3 Click Windows Explorer. 4 Click My Computer to expand the window. 5 In the left part of the window, click the line that ends in “(C:).” 6 In the left part of the window, under the C: icon, doubleclick the folder containing the program, in this case Program Files. Windows® Explorer shows the contents of the Program Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder.
Learning the Basics Saving your work 2 89 In the Run dialog box: ❖ If you know the program’s location, type the command line. For a program in the Windows® folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: c:\Program Files\Windows NT\Accessories\wordpad.exe, then click OK. ❖ If you do not know the location, you can search for it by clicking Start, then Search, and then following the on-screen instructions.
Learning the Basics Saving your work Saving files 1 In your Windows® application, click File, and then Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name. (Sample Image) Save As dialog box 2 Choose the drive and folder where you want your file to be stored.
Learning the Basics Saving your work 91 File names The Windows operating system supports long file names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and '. File names are not case-sensitive.
Learning the Basics Printing your work Printing your work Ensure the operating system is set up for your printer as described in “Setting up a printer” on page 68. HINT: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the Windows® operating system to run with the additional printer(s). To print a file: 1 If your printer is not on, turn it on now.
Learning the Basics Backing up your work 93 Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available. To back up several files at one time, use the Microsoft® Windows® backup program preinstalled on the computer’s hard disk. Also see “Backing up your data to CDs with Windows XP” on page 226.
Learning the Basics Using the optical drive Using the optical drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus. For these reasons, your computer may come with an optical drive.
Learning the Basics Using the optical drive 95 Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.
Learning the Basics Using the optical drive Power button Internet browser* CD/DVD* Play/Pause* Stop* Next track* Previous track* *Available on certain models (Sample Illustration) Media Control buttons The Internet browser button lets you access the Internet when the computer is powered on or off, or is in Standby mode or Hibernation mode. Please refer to “Connecting to the Internet” on page 136. The following chart describes the functionality of the Internet browser button.
Learning the Basics Using the optical drive 97 The following chart describes the functionality of the CD/DVD button. Power is off or the computer is in Hibernation mode and you press the CD/DVD button If a CD is in the drive, the system operates as a stand-alone CD player. Operating system is running or the computer is in Standby mode and you press the CD/DVD button If a CD is in the drive, the system launches the default music player and begins playing the CD.
Learning the Basics Using the optical drive 4 Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CD or DVD discs” on page 103. 6 Place the disc carefully in the disc tray, label side up. (Sample Illustration) Positioning the disc in the drive 5.375 x 8.375 ver 2.
Learning the Basics Using the optical drive 7 99 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive.
Learning the Basics Using the optical drive Stop button Play/Pause button (Sample Image) Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing. 5.
Learning the Basics Using the optical drive 101 Playing a CD/DVD If you insert a CD/DVD into the optical drive and the AutoRun feature does not automatically start your disc, try launching the CD/DVD manually. To do this, follow these steps: 1 Click Start, and then My Computer. 2 Click the optical drive icon. The disc drive will run the CD/DVD. If your disc does not run using this method, try using an application that is associated with the media on the disc.
NOTE Learning the Basics Using the optical drive Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/ recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or playback optical media recorded by other computers or optical media recorders.
Learning the Basics Using the optical drive 103 Removing a disc with the computer off To remove a disc with the computer turned off: 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. 2 Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.
Learning the Basics Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 231. 5.375 x 8.375 ver 2.
Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba.
Mobile Computing Running the computer on battery power Battery Notice Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage.
Mobile Computing Running the computer on battery power 107 The computer also has an internal real-time-clock (RTC) battery. The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off. TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached. The RTC battery charges only while the computer is powered on.
Mobile Computing Charging batteries Charging batteries The battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Mobile Computing Charging batteries 109 The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes.
Mobile Computing Monitoring main battery power If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Mobile Computing Monitoring main battery power NOTE 111 If the AC power light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. See “Changing the main battery” on page 117 for information on replacing the main battery.
Mobile Computing Monitoring main battery power Determining remaining battery power NOTE Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. 1 Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. 2 Click the TOSHIBA Power Saver icon. The Power Saver Properties window appears.
Mobile Computing Monitoring main battery power 113 ❖ Connect the computer to an optional high capacity battery (if available for your computer) ❖ Save your work and turn off the computer If you do not manage to do any of these things before the main battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off. Hibernation mode keeps track of where you were, so that when you turn on the power again, you can continue where you left off.
Mobile Computing Monitoring main battery power Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖ How the computer is configured ❖ How much you use the hard disk, optical drive, diskette drives, or other optional devices ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖ Enabl
Mobile Computing Monitoring main battery power 115 The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window 2 Select an appropriate profile for your work environment or create your own custom profile. By changing the options that appear in the Power Saver Properties dialog box and clicking OK, you can reconfigure that function. You may choose a power-saving management strategy to best suit your computing needs.
Mobile Computing Monitoring main battery power Using a hot key to set the Power Profile You may use a hot key to set the Power Profile. To set the Power Profile: 1 Press Fn and F2 simultaneously to display the Power Profile pop-up window. (Sample Image) Power Profile pop-up window 2 While continuing to press Fn, press F2 until you select the desired Power Profile. The Power Profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. 3 Release the Fn key.
Mobile Computing Changing the main battery 117 Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack and computer.
5 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock 6 Slide the battery release latch to release the battery. 7 Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery 5.375 x 8.375 ver 2.3.
Mobile Computing Changing the main battery 119 If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury.
3 Mobile Computing Taking care of your battery Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock 4 Turn the computer right side up. 5 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 117. 6 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Mobile Computing Taking care of your battery 121 ❖ Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. ❖ Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. ❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery.
Mobile Computing Taking care of your battery 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adaptor to the computer and the power cord/cable to a power outlet.
Mobile Computing Disposing of used batteries 123 Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes damaged. Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven).
Mobile Computing Traveling tips Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837. Notice regarding CR coin cell batteries, applicable to California, U.S.A. only: Perchlorate Material - special handling may apply. See http://www.dtsc.ca.
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows® operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system.
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray (Sample Image) Windows® operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Exploring Your Computer’s Features Exploring the desktop 127 The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer — The Microsoft® browser that provides access to the Internet.
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows. To make a program or window the currently active one, click the associated Taskbar button.
Exploring Your Computer’s Features Setting up for communications 129 Determining the COM port Your modem (available on certain models) is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Exploring Your Computer’s Features Setting up for communications 8 Click OK to close the properties dialog box for that specific modem. 9 Click OK to close the Modem Properties dialog box. 10 Close the Control Panel. Connecting the modem to a telephone line Your computer’s built-in modem (available on certain models) can be connected to a standard voice-grade telephone line. The modem allows you to: ❖ Access the Internet.
Exploring Your Computer’s Features Setting up for communications 1 131 Plug one end of a telephone cable (purchased separately) into the modem port on the right side of the computer. (Sample Illustration) Connecting the telephone cable to the modem port 2 Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack NOTE Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN).
Exploring Your Computer’s Features Setting up for communications Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: ❖ At the office, connect an Ethernet cable to the RJ45 jack on your computer.
Exploring Your Computer’s Features Setting up for communications 133 How to disable the Ethernet LAN port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can reconfigure Windows to disable the LAN port. To disable the LAN port: 1 Click Start, Control Panel, and then Performance and Maintenance.
Exploring Your Computer’s Features An overview of using the Internet Your system may come with an optional wireless LAN module. This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables. For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator.
Exploring Your Computer’s Features An overview of using the Internet 135 The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information.
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: ❖ A modem (available on certain models) and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account The Microsoft® Web browser Internet Explorer is automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you in setting up your computer to wo
Exploring Your Computer’s Features An overview of using the Internet 137 Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
❖ Exploring Your Computer’s Features Exploring audio features Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale.
Exploring Your Computer’s Features Exploring audio features 139 Using a microphone 1 Connect an external microphone to the computer. 2 Click Start, All Programs, Accessories, Entertainment, and then Sound Recorder. Positioning bar Record Stop Play Skip forward Skip backward (Sample Image) Sound Recorder screen 3 Click the Record button. 4 Speak normally into the microphone. 5 When you have finished recording, click the Stop button.
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.
Exploring Your Computer’s Features Using PC Cards 141 Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use.
Exploring Your Computer’s Features Using PC Cards Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. NOTE 1 Before removing a PC Card, make sure that no applications or system services are using the card. Prepare the card for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove.
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot 143 Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online Help.
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Inserting memory media The following instructions apply to all types of supported media devices. 1 Turn the media so that the contacts (metal areas) are face down. 2 Push the media into the adapter until it locks in place. (Sample Illustration) Inserting memory media When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data.
Exploring Your Computer’s Features Using the i.LINK® port 3 145 Grasp the card and pull it straight out. (Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. Even when the Windows message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out. Using the i.LINK® port (Available on certain models) The i.
Chapter 5 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter.
Toshiba Utilities TOSHIBA Assist 147 ❖ TOSHIBA Touch and Launch Utility ❖ Fingerprint Authentication Utility (available on certain models) TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop. ❖ Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears.
Toshiba Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of options: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize Connect The features available in this category are: ❖ ConfigFree™ Connectivity Doctor ❖ ConfigFree ❖ Bluetooth® Settings (available on certain models) ❖ Bluetooth Local COM Settings (available on certain models) (Sample Image) TOSHIBA Assist window – Connect tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist 149 Secure The features available in this category are: ❖ User password ❖ Supervisor password (Sample Image) TOSHIBA Assist window – Secure tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: ❖ PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA Assist 151 Optimize The features available in this category are: ❖ Hotkey assignment using Fn-esse® ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA SD™ Memory Card Format Utility ❖ TOSHIBA Power Saver ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Accessibility ❖ TOSHIBA Touch and Launch Utility ❖ Fingerprint Authentication Utility (available on certain models) (Sample Image) TOSHIBA Assist window – Optimize
Toshiba Utilities Setting passwords Setting passwords Setting a password lets you walk away from your computer, secure in the knowledge that nobody can access your files. When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Toshiba Utilities Setting passwords 153 To unlock your system, press any key or touch the pointing device and the Windows® Logon screen will appear. Select your user name and enter your password, if any. Using a user password A user password provides instant password and power-on password protection. Setting a user password To register a password for the power-on password functions: 1 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears.
4 Toshiba Utilities Setting passwords Select Registered. A pop-up screen appears asking for a password. 5 Enter a password, then click OK. 6 Enter the password again, then click OK. 7 Click OK to exit. Deleting a user password To cancel the power-on password function: 1 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. 2 On the left side, click the Secure tab. 3 Select the User Password icon.
Toshiba Utilities Setting passwords 155 Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
4 Toshiba Utilities Setting passwords Select Registered. A pop-up screen appears asking for a password. 5 Enter a password, then click OK. 6 Enter the password again, then click OK. 7 Click OK to exit. Deleting a supervisor password To cancel the power-on password function: 1 2 3 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab. Select the Supervisor Password icon.
Toshiba Utilities PC Diagnostic Tool Utility 157 PC Diagnostic Tool Utility This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help. To use the PC Diagnostic Tool utility: 1 Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of TOSHIBA Assist. The PC Diagnostic Tool window appears.
Toshiba Utilities Fn-esse® Fn-esse® Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any Windows® program without using the Start menu. For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer. This section describes how to use the Fn-esse program to quickly access your programs and files.
Toshiba Utilities Fn-esse® 159 The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray. There are two ways to assign a key to open a program or document: ❖ Using drag-and-drop ❖ Using the keyboard or pointing device The method most often used is drag-and-drop.
Toshiba Utilities Fn-esse® Using the keyboard or pointing device to assign a key To assign a key to open a program or document: 1 Start Fn-esse. 2 Perform one of the following: ❖ Using the keyboard, press and hold the Fn key, then press the desired assignment key. ❖ Using the pointing device, move the cursor over the desired key in the Fn-esse window and press the secondary button. The Assignment Type dialog box appears.
Toshiba Utilities Fn-esse® 161 Making a popup assignment 1 Select Popup to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the All Programs menu. The right side lists the programs and documents in the folder. These are the items that will appear in the popup list.
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the Hotkey utility: 1 Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility. The TOSHIBA Hotkey window appears. (Sample Image) TOSHIBA Hotkey Utility window 2 Select the desired option(s). 3 Click OK. 5.375 x 8.375 ver 2.
Toshiba Utilities TOSHIBA SD™ Memory Card Format Utility 163 TOSHIBA SD™ Memory Card Format Utility This utility is used to format SD™ cards used with the Bridge Media Adapter slot. To format an SD memory card using this utility: 1 Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format, or click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA SD Memory Card Format screen appears.
Toshiba Utilities TOSHIBA Power Saver TOSHIBA Power Saver The TOSHIBA Power Saver is used for power management, enabling you to control your computer’s power usage, regardless of the source, and use the many preset power profiles, or create one yourself. To access TOSHIBA Power Saver: ❖ Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver, or click the Power Management icon in either the Optimize tab of TOSHIBA Assist or in the system tray.
Toshiba Utilities TOSHIBA Power Saver 165 Preset Power Profiles The preset power profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require. The DVD Playback profile applies only when a DVD program is playing while running the computer on battery power.
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start, Control Panel, and then Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist. The Mouse Properties screen appears.
Toshiba Utilities Toshiba Hardware Setup 167 Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool available through the Windows® operating system. To access it: ❖ Click Start, All Programs, Toshiba, Utilities, Assist, or click the Toshiba Hardware Setup icon in the Optimize tab of TOSHIBA Assist. The Toshiba Hardware Setup screen appears.
❖ Toshiba Utilities Toshiba Hardware Setup Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5. For more information, see “Directing the display output when you turn on the computer” on page 65.
Toshiba Utilities TOSHIBA Zooming Utility ❖ 169 Boot Priority—Allows you to change the sequence in which your computer searches the drives for the operating system You can also manually choose the Boot Priority by pressing the power button, then quickly pressing the F12 key, or the right or left arrow keys. Select the boot device icon by pressing the right or left arrow keys, then pressing the Enter key.
Toshiba Utilities TOSHIBA Zooming Utility To access the Zooming utility: 1 Click Start, All Programs, Toshiba, Utilities, and then Zooming Utility, or click the Zooming Utility icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Zooming Utility Properties screen appears. (Sample Image) TOSHIBA Zooming Utility Properties screen 2 Select the desired option(s). 3 Click OK. The zoom in and zoom out hot keys will now work with the applications you selected.
Toshiba Utilities CD/DVD Drive Acoustic Silencer 171 CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. NOTE When you change the CD/DVD drive to “Quiet” mode, the setting is only valid for the current Windows session. If you shut down, restart, log off, or resume from hibernation, the setting will revert back to Normal speed.
Toshiba Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the Fn key a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Toshiba Utilities TOSHIBA Touch and Launch Utility 173 TOSHIBA Touch and Launch Utility TOSHIBA Touch and Launch (available on certain models) is a program that adds features to the TouchPad. For example, by selecting an icon you can: ❖ Open a document ❖ Launch a program ❖ Show a list of windows and switch the active window ❖ Open Internet Explorer favorites TOSHIBA Touch and Launch is like a miniature Windows® desktop.
Toshiba Utilities TOSHIBA Touch and Launch Utility If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window remains open. To close the TOSHIBA Touch and Launch window, release your finger when the blue circle is not on any icon.
Toshiba Utilities TOSHIBA Touch and Launch Utility 175 The type and number of icons you see in the main part of the TOSHIBA Touch and Launch window are determined by which corner icons you select. TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window.
Toshiba Utilities TOSHIBA Touch and Launch Utility In the Corner Assignment section, you can change the icons you see at the four corners of the TOSHIBA Touch and Launch window using the drop-down list boxes. The icons are referred to as tables in the TOSHIBA Touch and Launch Settings dialog box. The TouchPad settings button allows you to define how sensitive the TouchPad will be to your finger on the TouchPad before it activates the TOSHIBA Touch and Launch window.
Toshiba Utilities Fingerprint Authentication Utility 177 Fingerprint Authentication Utility (Available on certain models) The fingerprint authentication utility (available on certain models) can be used to replace the keyboard-based user/ BIOS password authentication system when booting up. The fingerprint authentication utility can also be used for user logon. The user’s fingerprint is read; if the system recognizes the fingerprint, the user is automatically logged on.
Toshiba Utilities Fingerprint Authentication Utility 5 Click the button above the finger you want to enroll. 6 Swipe your finger on the reader. A sample will be created and indicated by a Fingerprint icon. 7 Repeat the previous step. Swipe the same finger on the reader two more times to create two more samples. 8 The final template will be created from these three samples. NOTE If you do not use a Windows password, you will be prompted to define a new (non-empty) one.
Toshiba Utilities Fingerprint Authentication Utility 179 ❖ Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line. ❖ Error reading fingerprint—the movement was too fast. Swipe your finger again at a slower speed. ❖ Error reading fingerprint—the movement was too short. Swipe your finger again using a longer motion. Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints.
Toshiba Utilities Fingerprint Authentication Utility Enabling Power-on Security Options for power-on security are displayed only if your computer supports this feature. In most configurations, power-on security is enabled automatically after the first user fingerprints are enrolled. To disable/enable power-on security: 1 Open the Control Center and go to Settings - Power-on Security. (This wizard is displayed only if your system supports power-on security.
Toshiba Utilities Fingerprint Authentication Utility 181 Fingerprint Management Fingerprints are stored in memory during enrollment. After a fingerprint is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security. If you do not want to use a fingerprint for power-on security but only for logon, click the Boot button to delete the fingerprint from the fingerprint device memory.
Toshiba Utilities Fingerprint Authentication Utility Settings ❖ System Settings—Opens the Settings dialog containing various options for setting up the product. Most of these settings can be modified only by administrators and affect all users. ❖ User Settings—Opens the User Settings dialog containing user-specific options for setting up the product. ❖ Power-on Security—The memory of the fingerprint device is limited (typical capacity is 21 fingerprints).
Toshiba Utilities Fingerprint Authentication Utility 183 Password Bank The Password Bank stores registration and logon information for Web sites and dialogs, helping to automate the task of entering this information. You enter the required information only once, during Web page or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the reader. Registered Web pages can also be accessed directly from the Biomenu.
Toshiba Utilities Fingerprint Authentication Utility Registering a new Web page or dialog You are logged on to the computer and want to register a new Web page. To create a new registration: 1 Display a Web page you want to register. 2 Fill in the data you want to replay the next time you access this Web page. 3 Use the reader to display the Biomenu. 4 Select Register. Password Bank recognizes pages containing a password field and displays a hint that the page can be registered.
Toshiba Utilities Fingerprint Authentication Utility 185 Replaying registrations with multiple forms Password Bank registers forms, not pages. If a page contains several forms, each form requires a separate registration. If a page contains several forms, replaying works as follows: ❖ If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed.
Toshiba Utilities Fingerprint Authentication Utility 4 Select a registration. 5 Click Edit. 6 Change the value of an item or delete the item. 7 Select the Auto submit check box to submit the selected registration automatically after replaying the registration. A warning is displayed if you attempt to register a form or dialog that may be incompatible or not work properly with automatic submittal.
Toshiba Utilities Fingerprint Authentication Utility 187 4 If other fingerprint data is still displayed on the list, hold down the Control key and select each fingerprint until they are all selected, then click Remove. 5 Click OK to make the changes permanent. 6 Check that all Fingerprint data was deleted on the Fingerprint Storage Inspector screen.
❖ Toshiba Utilities Fingerprint Authentication Utility Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g., after taking bath) ❖ Injured finger ❖ Wet finger ❖ Soiled or oily finger ❖ Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate. ❖ Enroll two or more fingers.
Toshiba Utilities Fingerprint Authentication Utility 189 Fingerprint reader limitations ❖ The fingerprint reader compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficiently unique characteristics in their fingerprints. ❖ A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration.
Chapter 6 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems that are easy to fix 191 To close a program that has stopped responding: 1 Press Ctrl, Alt, and Del simultaneously (once). The Windows Task Manager window appears. 2 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step.
If Something Goes Wrong Problems when you turn on the computer Your program performs an illegal operation. If you receive the message, “Your program has performed an illegal operation,” close the window and continue working. If it happens again, record the details of the message and consult the software manufacturer. To record the details: 1 Click the Details button and select the text the operating system displays.
If Something Goes Wrong Problems when you turn on the computer 193 If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source. The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
If Something Goes Wrong The Windows® operating system is not working Always save your data even when you are using Standby. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see “What to do when the main battery runs low” on page 112. If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time.
If Something Goes Wrong The Windows® operating system is not working 195 Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
If Something Goes Wrong The Windows® operating system is not working See your Windows® documentation for further explanation. NOTE If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
If Something Goes Wrong Resolving a hardware conflict 2 197 Then do one or both of the following: ❖ In the search field, type in the topic for which you need help and follow the on-screen instructions. ❖ Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com.
If Something Goes Wrong Resolving a hardware conflict The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
If Something Goes Wrong Resolving a hardware conflict 199 Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
If Something Goes Wrong Resolving a hardware conflict 201 To check a device’s properties: 1 Click Start, Control Panel, then click Performance and Maintenance. 2 Click the Administrative Tools icon. 3 Double-click Computer Management, then click Device Manager. 4 To view the device(s) installed, double-click the device type. 5 To view the properties, double-click the device. The operating system displays the Device Properties dialog box, which provides an array of tabs.
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: 1 Click Start, Turn off computer. 2 Click Turn Off. The operating system shuts down and turns off the computer automatically. 3 Remove the memory module, following the instructions in “Removing a memory module” on page 58.
If Something Goes Wrong Resolving a hardware conflict 203 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
If Something Goes Wrong Resolving a hardware conflict The battery appears not to power the computer for as long as it usually does. If you frequently repeat shallow charge and discharge, the battery meter may become inaccurate. Let the battery discharge completely, then try charging it again. Check the power options using the Power Management utility.
If Something Goes Wrong Resolving a hardware conflict 205 You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard. Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on.
If Something Goes Wrong Resolving a hardware conflict If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached. ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen.
If Something Goes Wrong Resolving a hardware conflict 207 A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display. To change the display properties: 1 Right-click in a blank area of the Windows® desktop. The Display Properties window appears. 2 Click Properties, then click the Settings tab.
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:).
If Something Goes Wrong Resolving a hardware conflict 7 209 Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures.
If Something Goes Wrong Resolving a hardware conflict The computer displays the Non-system disk or disk error message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette. Try another diskette. If you can access the second diskette, the first diskette (not the drive) is probably causing the problem.
If Something Goes Wrong Resolving a hardware conflict 211 If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical drive eject button on the face of the optical drive tray. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager.
If Something Goes Wrong Resolving a hardware conflict 213 If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system. PC Card checklist ❖ Make sure the card is inserted properly into the slot. ❖ Make sure all cables are securely connected.
If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address. See “Fixing a problem with Device Manager” on page 200 for more information. Since all PC Cards share the same socket, each card is not required to have its own address.
If Something Goes Wrong Resolving a hardware conflict 215 A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems. The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line).
If Something Goes Wrong Resolving a hardware conflict The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode. This mode lets you see your work exactly as it will print. Contact the software manufacturer for more information. Modem problems NOTE This section applies only to systems with a built-in modem. This section lists common modem problems.
If Something Goes Wrong Resolving a hardware conflict 217 Wireless networking problems NOTE This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) networking. The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see Windows Help and Support or contact your computer technician.
If Something Goes Wrong Resolving a hardware conflict ❖ Check the Control Panel’s Device Manager to verify that the Wi-Fi adapter is recognized by Windows®, and that the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. ❖ Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: 1 Click Start, Control Panel. 2 Double-click Network Connections.
If Something Goes Wrong Resolving a hardware conflict ❖ ❖ 219 Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter. ❖ If “Request Timed Out” or another error message appears in response, then the problem is probably Wi-Fi-related.
If Something Goes Wrong DVD operating problems 3 Select Allow me to connect to the selected wireless network, even though it is not secure. 4 Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility.
If Something Goes Wrong DVD operating problems 4 221 Clean the disc and try again. A dirty drive can also cause audio problems. If you have tried several discs and all fail, consider sending your drive to an authorized service provider to get it cleaned. 5 Verify that your computer recognizes your optical drive by double-clicking the My Computer icon on the desktop. The optical drive should appear in the list.
If Something Goes Wrong DVD operating problems 4 Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. 5 Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: 1 Right-click the Desktop, select Properties. 2 Select the Settings tab. 3 Select the Advanced Flat Panel tab.
If Something Goes Wrong Develop good computing habits 6 Click None. 7 Click OK. 223 Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 81 for instructions. On a regular basis, back up the information stored on your hard disk.
If Something Goes Wrong Develop good computing habits Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together. Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase.
If Something Goes Wrong Develop good computing habits 225 Follow these steps to create a Restore Point using the System Restore utility: 1 Click Start, and then Help and Support. 2 Under Pick a Task, click Undo changes to your computer with System Restore. 3 Click Create a restore point, and then click Next. 4 In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create.
If Something Goes Wrong Develop good computing habits Backing up your data to CDs with Windows XP The most valuable component of your computer system is the data that you create and store on its hard drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a recent backup of your data.
If Something Goes Wrong Develop good computing habits NOTE 227 Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖ E-mail files and settings—for Outlook, Outlook Express, or other e-mail applications. Visit the vendors’ Web sites (www.microsoft.com, for example) for detailed instructions.
If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): 1 In Internet Explorer, click File, Import and Export. 2 The Import/Export Wizard will appear. Click Next. 3 Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.
If Something Goes Wrong Develop good computing habits 229 General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe® Photoshop®, or utility software such as special toolbars for your web browser). ❖ Create a Restore Point (refer to “Saving system configuration with Restore Points” on page 224).
❖ If Something Goes Wrong If you need further assistance Do one installation at a time. If you have several new items to add to your computer system, install just one at a time, creating Restore Points immediately before each successive installation. This will make it much easier to determine the origin of any new problems. For best results, follow this sequence: 1 Back up critical data. 2 Create a Restore Point. 3 Install one item of hardware or software. 4 Restart Windows.
If Something Goes Wrong If you need further assistance 231 ❖ If the problem occurs while you are running a program, consult the program’s documentation for troubleshooting suggestions. Contact the software company’s technical support group for their assistance. ❖ Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the complete detailed specifications for your computer, visit pcsupport.toshiba.com.
If Something Goes Wrong Other Toshiba Internet Web sites ❖ Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA accessories.toshiba.
If Something Goes Wrong Toshiba’s worldwide offices 233 Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041, Agrate Brianza Milano, Italy Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 234 5.375 x 8.375 ver 2.3.
Hot Keys Password security 235 Password security This hot key blanks the display. Fn + Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password The Fn + F1 key combination turns off the display and activates instant security.
Hot Keys Password security 4 Click the On resume, password protected check box. 5 Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
Hot Keys Power profile 237 Power profile Fn + This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the TOSHIBA Power Saver utility. For more information, see “TOSHIBA Power Saver” on page 164. Standby mode Fn + This hot key places the computer into Standby mode. A message box displays by default to confirm that the computer is entering Standby mode.
Hot Keys Hibernation mode Hibernation mode Fn + This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page 75. 5.375 x 8.
Hot Keys Display modes 239 Display modes Fn + This hot key cycles through the power-on display options.
Hot Keys Disabling or enabling wireless devices Disabling or enabling wireless devices Fn + This hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ All disabled—Disables both the Bluetooth® and Wi-Fi modules. ❖ Wi-Fi enabled—Enables just the Wi-Fi module. ❖ Bluetooth enabled—Enables just the Bluetooth module. ❖ All enabled—Enables both Bluetooth and Wi-Fi.
Hot Keys Zooming applications in/out 241 Zooming applications in/out Fn + This hot key turns the Zooming utility to zoom-out. For more information, see “TOSHIBA Zooming Utility” on page 169. Fn + This hot key turns the Zooming utility to zoom-in. For more information, see “TOSHIBA Zooming Utility” on page 169. Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off.
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia Europe AS approved VDA approved NEMKO approved 242 5.375 x 8.375 ver 2.
Appendix C ™ Using ConfigFree with your Toshiba Computer NOTE All references to Bluetooth® in this appendix are applicable only if Bluetooth is available on your system. ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks. NOTE For more information on using ConfigFree, see the ConfigFree online Help.
Using ConfigFree™ with your Toshiba Computer Getting Started information about them on a virtual map. For more information, see “Search for Wireless Devices” on page 249. ❖ Profile Settings—The Profiles utility lets you switch between network configurations. For more information, see “Profile Settings” on page 254. ❖ ConfigFree SUMMIT—The ConfigFree SUMMIT utility is used to connect with other ConfigFree users for file sharing. For more information, see “ConfigFree SUMMIT” on page 257.
Using ConfigFree™ with your Toshiba Computer Getting Started NOTE 245 If your computer is not connected to a network, the ConfigFree icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 247 ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location. You can also view the possible cause and solution for the problem by clicking the exclamation point.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 249 Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth® devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: 1 Click the icon in the system tray. 2 Click Search for Wireless Devices. A virtual map appears with a graphical representation of the wireless devices that have been detected.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection NOTE This feature is only supported on systems running Windows XP SP2. To add a new wireless connection to an Access Point: 1 Open the Search for Wireless Devices option from ConfigFree Launcher. 2 Drag and drop the device you want to connect to the computer icon at the center of the map. The Wireless Settings screen appears. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 251 (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen 3 NOTE Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection list, the system displays the Connection screen rather than the Wireless settings screen. 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth® devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 253 (Sample Image) Dragging the file to the Bluetooth® device icon To be prompted for the device: 1 Drag and drop the file to the Bluetooth® radar icon on the ConfigFree Launcher. (Sample Image) Dragging the file to the Bluetooth® radar icon Or, you can right-click the file and select Send to Bluetooth Devices. (Sample Image) Selecting Send to Bluetooth® Devices option 5.375 x 8.375 ver 2.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 2 Choose a file recipient. 3 Click Send. NOTE During a file transfer, connecting and disconnecting to the selected device will occur automatically. Disconnecting from a Bluetooth® device To disconnect from a Bluetooth® device: 1 Place the cursor on top of the connected line. The icon changes to a pair of scissors. 2 Click to disconnect from the device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 255 ❖ TCP/IP settings—includes DHCP, IP address, subnet mask, default gateway, DNS server, and WINS server settings ❖ Personal firewall settings for Internet connections ❖ Dial-up connection settings for the default connection ❖ File and printer sharing settings ❖ Printer settings for the default printer ❖ Bluetooth® Security Level (for example, high or medium) To create a profile: 1 Click the icon in the system tray.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 11 Under Execute this program after switching, click the Browse button and select the program, file, or Web site URL that is to start after switching to this profile. For example, to have Internet Explorer start in the Windows operating system after switching profiles, type: C:\Program Files\Internet Explorer\IEXPLORE.EXE 12 Click OK.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities NOTE 257 The online Help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported. This feature is useful when transferring profile settings to other computers. For more information about modifying, importing, and exporting profiles, refer to the online Help.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Select users Send invitations (Sample Image) Inviting users to SUMMIT meeting When a user joins the SUMMIT, their icon appears on the SUMMIT table. (Sample Image) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 259 (Sample Image) Sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. NOTE If you are the Host of the summit, and drag a file to the center of the SUMMIT table, it will automatically be sent to all SUMMIT users who can then accept or decline the file as desired.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: 1 Click the icon in the system tray. 2 Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE 3 Select the appropriate users and invite them to the SUMMIT meeting. As users join the SUMMIT, their icons appear on the SUMMIT table.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 261 An Access Point may not always be available. To find out how to use Quick Connect to launch ConfigFree Summit, see “Direct Link Toshiba Device” on page 263. Quick Connect The Quick Connect feature includes two options: ❖ Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector ❖ Direct Link Toshiba Device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 2 Use the pointing device to select the Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears. 3 Complete the settings. Refer to the online Help if necessary. 4 Click OK. NOTE Because the wireless LAN’s default connection setting is for Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 263 ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection) ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device ❖ If you close ConfigFree Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature.
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home. The Auto Switch feature contains options for automatically switching between wired and wireless devices.
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature 265 2 Click Auto Switch. The Auto Switch dialog box appears. 3 Select the Auto Switch (SSID) tab. 4 Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles. 5 Repeat the previous step for each additional profile you want to select. 6 Select Automatically switch profiles when connected to this SSID.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide.
Glossary DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc 267 DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IEEE Institute of Electrical and Electron
Glossary RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may appear in this user’s guide.
Glossary 269 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
C Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD — An individual compact disc. See also CD-ROM. CD-ROM (compact disc read-only memory) — A form of highcapacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM.
Glossary 271 CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor — A symbol that indicates the current position on the screen. The shape of the cursor varies, depending on the program you are using and what you are doing.
Glossary disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data. Diskettes can be removed from the computer and come in two sizes: 5.25-inch and 3.5-inch. Your computer uses 3.5-inch diskettes. See also double-density diskette, high-density diskette.
Glossary 273 executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities. Other names for an expansion device are port expander, port replicator, docking station, or network adapter. extension — See file extension. external device — See device.
Glossary G ground — A conductor to which all components of an electric circuit are connected. It has a potential of zero (0) volts, is connected to the earth, and is the point of reference for voltages in the circuit. H hard disk — A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than diskettes and are used for long-term storage of programs and data.
Glossary 275 Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. K keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L L1 (level one) cache — Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache.
Glossary MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Glossary 277 optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. P palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel.
Glossary properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. R RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM. random access memory — See RAM. read-only memory — See ROM. reboot — See boot, restart.
Glossary 279 shortcut — See keyboard shortcut. software — See program. Compare hardware. Standby — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
W Glossary Web — See World Wide Web. Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet. 5.375 x 8.375 ver 2.
Index A AC adaptor 46 AC power connecting adaptor 48 accessories memory 52 adding memory 52 adjusting recording quality 139 Alt keys 84 audio files 138 audio features 138 B backing up files 82 battery alarms 113 changing 117 charge indicator light 48, 110 charge not lasting 204 charging 46, 49 conserving power 114 disposal 122 low charge 112 monitoring power 48, 110 not charging 203 power profile 237 power profile hot key 116 real-time clock (RTC) 107 removing 117 BIOS Setup see Toshiba Hardware Setup Brid
Index checking device properties 200 click 62 communications network connection 132 set up 128 system resources 198 compact disc positioning 98 compact discs handling 99 inserting 97 removing 102, 103 compact disk drive using 94 computer caring for 79 cleaning 79 moving 79 non-system disk or disk error message 194 not accessing disk drives 193 running on battery power 105 setting up 43, 53 warning resume failure message 193 computer lock 80 computing tips 81 connecting to a power source 46 connection
Index general hardware problem 197 non-system disk or disk error 194, 210 problem with display settings/ current settings not working with hardware 207 program has performed an illegal operation 192 warning resume failure 193 Error-checking 208 Ethernet LAN port 133 expansion memory slot 55 exploring the desktop 125 external monitor not working 207 mouse 67 external diskette drive connecting 69 external display, adjusting 66 F FAT (File Allocation Table) 208 file extensions 91 file, backing up 82 files bac
Index Internet bookmarked site not found 196 connecting to 136 features 137 slow connection 196 surfing 137 uploading and downloading files 138 URL address not found 196 using 134 Internet Explorer icon 127 Internet Service Providers 135 IRQ (Interrupt Request) 198 ISPs 135 J jack RJ-11 131 K key assignment viewing existing 161 key assignments changing or removing existing 161 keyboard character keys 83 function keys 84 hot keys 241 not working 193 overlay keys 85 troubleshooting 204 using 83 Windows
Index deleting a supervisor 156 disabling a user 154 supervisor set up 155 types 152 passwords instant, using 152 setting 152 PC Card checklist 213 CIS (Card Information Structure) 212 computer stops working 214 configuring 143 errors 215 hot swapping fails 214 inserting 141 not recognized 214 problem solving 212, 213 removing 142 setting up 143 Plug and Play 199 port COM 129 Ethernet LAN 133 RGB 64 power computer will not start 192 connecting cable to AC adaptor 47 cord/cable connectors 242 energy-saving
Index disk 208 modem not receiving or transmitting 216 no sound 211 non-system disk or disk error 194, 210 PC Card 212 checklist 213 error occurs 215 hot swapping fails 214 not recognized 214 slot appears dead 213 power and batteries 202 printer 215, 216 program not responding 190 program not working properly 209 screen does not look right/flickers 206 Startup options 195 system resources 198 URL address not found 196 warning resume failure 193 Windows XP not working 194 program, starting 86 programs
Index from Shut down 75 from Standby 78 Startup menu problem solving 195 supervisor password, deleting 156 supervisor password, set up 155 system tray 128 T Taskbar 128 telephone line connecting to modem 130 television adjusting display 66 Toshiba registering computer 44 worldwide offices 232 TOSHIBA Assist 147 Toshiba Hardware Setup 167 Toshiba online resources 104 TOSHIBA Touch and Launch 173 disable/enable 176 Toshiba utilities 146 traveling tips 124 troubleshooting DVD player general problems 220 exter
