User Guide

4 Replacement Procedures 4.1 General
Removing the Optional Memory
Remove the optional memory (module) according to the following procedures and Figures 4-4
and 4-5, after checking that the computer is turned off in boot mode.
CAUTION: Remove the optional memory after turning off the computer. If this is violated,
the computer or memory can be damaged.
1. Turn the computer upside down.
2. Remove the two M2.5x4 white bind screws.
3. Remove the memory cover.
CAUTION: Do not touch the connectors on the memory modules or in the computer.
Contaminated connectors can cause memory access problems.
Figure 4-4 Removing the memory cover
4-12 Satellite M20 Maintenance Manual